GLAST/LAT > DAQ and FSW > FSW > Doxygen Index > MEM / V5-4-1
Constituent: mem_scp     Tag: linux-gcc
#include "CLI/CLI_pubdefs.h"
Include dependency graph for MEM_send_cmd.h:
This graph shows which files directly or indirectly include this file:
Functions | |
unsigned int | MEM_loadBankHeader (unsigned int lat_unit, unsigned int address, unsigned int rtos_bytes, unsigned int sbc_0_bytes, unsigned int sbc_1_bytes) |
Load a bank header into SIB EEPROM. | |
unsigned int | MEM_sendCancel (unsigned int unit) |
Send the Memory Dump Cancel command. | |
unsigned int | MEM_sendDump (unsigned int unit, unsigned int start, unsigned int count) |
Send the Memory Data Dump command. | |
unsigned int | MEM_sendLoad (unsigned int unit, unsigned int addr, unsigned int value) |
Send the Memory Write command. | |
unsigned int | MEM_sendPciDump (unsigned int unit, unsigned int tran, unsigned int bus, unsigned int device, unsigned int function) |
Send the PCI Device Header Dump command. | |
unsigned int | MEM_sendPciLoad (unsigned int unit, unsigned int bus, unsigned int device, unsigned int function, unsigned int offset, unsigned int value) |
Send the PCI Device Header Write command. | |
unsigned int | MEM_sendPoolDump (unsigned int unit, unsigned int tran, unsigned int pool) |
Send the Memory Pool Status Dump command. | |
unsigned int | MEM_sendRegDump (unsigned int unit, unsigned int tran) |
Send the Processor Register Dump command. | |
unsigned int | MEM_sendRegLoad (unsigned int unit, unsigned int offset, unsigned int value) |
Send the Processor Register Write command. | |
unsigned int | MEM_sendSymRelDump (unsigned int unit, unsigned int tran, unsigned int offset, unsigned int count, unsigned char *name) |
Send the Memory Dump Symbol Relative command. | |
unsigned int | MEM_sendSymValDump (unsigned int unit, unsigned char *name) |
Send the Memory Symbol Lookup command. | |
int | MEM_setDisplayLevelCmd (int level) |
Set the verbosity level of the MEM command display. | |
unsigned int | MEM_addSendSyntax (CLI_Syntax *syntax) |
Add MEM send commands to the command-line syntax. | |
unsigned int | MEM_addSyntaxSCP (CLI_Syntax *syntax) |
Add MEM commands to the command-line syntax for SCP. |
CVS $Id: MEM_send_cmd.h,v 1.6 2005/05/02 18:30:55 dmay Exp $
Defines the interface to the functions found in MEM_send_cmd.c.
|
Add MEM send commands to the command-line syntax.
|
Here is the call graph for this function:
|
Add MEM commands to the command-line syntax for SCP. Adds MEM commands to the command-line syntax when running in an SCP environment. This is the only MEM command-line syntax function called by SCP, so it must add both send and dump commands.
|
Here is the call graph for this function:
|
Load a bank header into SIB EEPROM.
|
Here is the call graph for this function:
|
Send the Memory Dump Cancel command.
|
Here is the call graph for this function:
|
Send the Memory Data Dump command.
|
Here is the call graph for this function:
|
Send the Memory Write command.
|
Here is the call graph for this function:
|
Send the PCI Device Header Dump command.
|
Here is the call graph for this function:
|
Send the PCI Device Header Write command.
|
Here is the call graph for this function:
|
Send the Memory Pool Status Dump command.
|
Here is the call graph for this function:
|
Send the Processor Register Dump command.
|
Here is the call graph for this function:
|
Send the Processor Register Write command.
|
Here is the call graph for this function:
|
Send the Memory Dump Symbol Relative command.
|
Here is the call graph for this function:
|
Send the Memory Symbol Lookup command.
|
Here is the call graph for this function:
|
Set the verbosity level of the MEM command display.
|