GLAST / LAT > DAQ and FSW > FSW > Doxygen Index> LATC / dev > latc_cmn / mv2304
64
, 0x40
).
More...
64
, 0x40
).
#define
statements for the codes in message facility LATC. The following table provides the equivalences between the #define
name, the #define
value and the associated formatting string. For the complete LATC message facility data definition, see MSG_FacList_LATC
and MSG_MsgList_LATC
.
Name | Value | Associated formatting string |
LATC_TEMCR | 0x20002487 | "The command and response masks for the TEMs differ %04x %04x" |
LATC_LLRNG | 0x20003dbb | "Value specified (0x%08x%08x) exceeds range of register field (%d bits)" |
LATC_NOMAP | 0x20005713 | "Missing map" |
LATC_NOCPT | 0x2000578f | "The component %d does not have configuration data" |
LATC_REPORT | 0x2000765e | "%s" |
LATC_SHTRNG | 0x200090bb | "Value specified (0x%04x) exceeds range of register field (%d bits)" |
LATC_RTRVMAP | 0x2000aa12 | "Retrieving %s map" |
LATC_SUMERR | 0x2000c997 | "Summary error bit set in result" |
LATC_LNGRNG | 0x20011fbb | "Value specified (0x%08x) exceeds range of register field (%d bits)" |
LATC_LAYDIF | 0x20012d8f | "The cached and captured configurations differ for %s (%d, %s, %d)" |
LATC_NOTSET | 0x2001386f | "Node %d %d is not set" |
LATC_NOTVXW | 0x200145b9 | "Function to interact with LAT called on a host system" |
LATC_NOADDR | 0x20014b27 | "Unaddressable type %d" |
LATC_NODATA | 0x2001522f | "No data to write" |
LATC_NOIMPL | 0x20015733 | "Function not implemented" |
LATC_NOFUNC | 0x20016093 | "No function pointer for this operation %d %d" |
LATC_DIFFER | 0x20022ca7 | "The cached and captured configurations differ for %s (%d, %d, %d, %d)" |
LATC_RTRVDATA | 0x20029e2e | "Retrieving %s data" |
LATC_PARITY | 0x2002c3d7 | "Parity error bit set in result" |
LATC_BADSTR | 0x200326b7 | "No type named %s" |
LATC_BADREG | 0x200327cb | "Index is larger than the number of registers %d > %d" |
LATC_BADLAY | 0x20032a97 | "Bad layer information (%c should be %s)" |
LATC_SUCCESS | 0x200333a8 | "Success" |
LATC_LSFREAD | 0x2003b1db | "Error reading file %s" |
LATC_NOWRITE | 0x20059f6b | "This type (%s) has only a single leaf and is thus written as part of the default structure" |
LATC_READONLY | 0x2005f5a7 | "File with fd %d cannot be written to, since it was opened read-only" |
LATC_READFROM | 0x2005fd5a | "Reading from file %s (fd %d)" |
LATC_OUTSIZE | 0x2008675b | "Data block is too large to fit into a datagram (%d < %d)" |
LATC_MAPLESS | 0x200a1fab | "This type (%d) has no map associated with it (singleton)" |
LATC_SHORTBUF | 0x200a64df | "Unexpected end of buffer" |
LATC_MIXDLRD | 0x200ad97b | "The LRD contains a LATC component inside a non-LATC component" |
LATC_FULLBUF | 0x200b19df | "Buffer full" |
LATC_VERSION | 0x200bedc7 | "Bad file version %d:%d (current is %d:%d)" |
LATC_BADREAD | 0x200c9ddb | "Error reading file with fd %d" |
LATC_BADSIZE | 0x200ca35b | "Blocks written to file must be at multiples of unsigned shorts" |
LATC_BADTYPE | 0x200ca7fb | "Unknown type %d" |
LATC_BADADDR | 0x200caf27 | "Bad address for type %d (depth %d), out of range (%d => %d)" |
LATC_BADINIT | 0x200cb4cf | "Failed to initialise the %s structure" |
LATC_BADFORM | 0x200cc1db | "Bad format string" |
LATC_WRITETO | 0x200cf716 | "Writing file %s" |
LATC_LATEDFLT | 0x20104b8d | "Default value for %s encountered after exception value" |
LATC_ENDOFILE | 0x20136df9 | "End of file" |
LATC_NOSPECAL | 0x20141723 | "This type (%s) has no non-default data to write" |
LATC_NODESTIN | 0x20151c77 | "No destination to copy to" |
LATC_NOBUFFER | 0x2016c0a7 | "Missing buffer" |
LATC_OUTOFRNG | 0x2021f8bb | "Address cpt (%d) for type %d is out of range (%d >= %d)" |
LATC_OVERFLOW | 0x20250c5b | "Attempting to build filename that exceeds limits" |
LATC_FAILAPPL | 0x20288bb3 | "Application of the configuration had errors" |
LATC_FAILDISC | 0x202890a3 | "Discovery of the configuration had error" |
LATC_XSRSTITM | 0x202fa1bb | "Excess result items in the result list" |
LATC_BADSPLIT | 0x2032948d | "Layer %d in tower %d had bad GTFE mode registers %08x" |
LATC_BADALLOC | 0x2032ad13 | "Failed to allocate %d bytes" |
LATC_BADALIGN | 0x2032b0d7 | "Memory block |%s| is not correctly aligned" |
LATC_BADAPPLY | 0x2032cf65 | "Error trying to apply a configuration to the LAT, register %d" |
LATC_BADINDEX | 0x2032d51f | "Index is larger than the number of instances %d > %d" |
LATC_BADDISCO | 0x2032e2e5 | "Error trying to discover a LAT configutation, register %d" |
LATC_BADCLOSE | 0x2032f29b | "Failed to close file with fd %d" |
LATC_BADFIELD | 0x203308ab | "Index is larger than the number of fields %d > %d" |
LATC_BADFOPEN | 0x20331017 | "Failed to open file %s" |
LATC_BADPARAM | 0x203310bb | "Function called with bad (NULL?) parameter |%s| " |
LATC_BADVALUE | 0x2033244b | "String contains invalid numeric characters" |
LATC_BADWRITE | 0x20332f6b | "Error writing file with fd %d" |
LATC_BADBCAST | 0x203337ef | "Bad address, mixture of bcast and unicast in address (%d, %d, %d, %d)" |
LATC_BADWIDTH | 0x2033471f | "Don't know how to handle a register of width %d" |
LATC_WRITONLY | 0x2033e9a7 | "File with fd %d cannot be read from, since it was opened write-only" |
LATC_XMLPARSE | 0x2038ef9b | "Failure of the XLX parser" |