LATC_msgs.h File Reference

Message definitions for message facility LATC (ID: 64, 0x40). More...

Detailed Description

Message definitions for message facility LATC (ID: 64, 0x40).

Warning:: Machine generated code - NEVER edit by hand

LATC_msgs.h provides all the #define statements for the codes in message facility LATC. The following table provides the equivalences between the #define name, the #define value and the associated formatting string. For the complete LATC message facility data definition, see MSG_FacList_LATC and MSG_MsgList_LATC.

Name Value Associated formatting string

LATC_TEMCR 0x20002487 "The command and response masks for the TEMs differ %04x %04x"

LATC_LLRNG 0x20003dbb "Value specified (0x%08x%08x) exceeds range of register field (%d bits)"

LATC_NOMAP 0x20005713 "Missing map"

LATC_NOCPT 0x2000578f "The component %d does not have configuration data"

LATC_REPORT 0x2000765e "%s"

LATC_SHTRNG 0x200090bb "Value specified (0x%04x) exceeds range of register field (%d bits)"

LATC_RTRVMAP 0x2000aa12 "Retrieving %s map"

LATC_SUMERR 0x2000c997 "Summary error bit set in result"

LATC_LNGRNG 0x20011fbb "Value specified (0x%08x) exceeds range of register field (%d bits)"

LATC_LAYDIF 0x20012d8f "The cached and captured configurations differ for %s (%d, %s, %d)"

LATC_NOTSET 0x2001386f "Node %d %d is not set"

LATC_NOTVXW 0x200145b9 "Function to interact with LAT called on a host system"

LATC_NOADDR 0x20014b27 "Unaddressable type %d"

LATC_NODATA 0x2001522f "No data to write"

LATC_NOIMPL 0x20015733 "Function not implemented"

LATC_NOFUNC 0x20016093 "No function pointer for this operation %d %d"

LATC_DIFFER 0x20022ca7 "The cached and captured configurations differ for %s (%d, %d, %d, %d)"

LATC_RTRVDATA 0x20029e2e "Retrieving %s data"

LATC_PARITY 0x2002c3d7 "Parity error bit set in result"

LATC_BADSTR 0x200326b7 "No type named %s"

LATC_BADREG 0x200327cb "Index is larger than the number of registers %d > %d"

LATC_BADLAY 0x20032a97 "Bad layer information (%c should be %s)"

LATC_SUCCESS 0x200333a8 "Success"

LATC_LSFREAD 0x2003b1db "Error reading file %s"

LATC_NOWRITE 0x20059f6b "This type (%s) has only a single leaf and is thus written as part of the default structure"

LATC_READONLY 0x2005f5a7 "File with fd %d cannot be written to, since it was opened read-only"

LATC_READFROM 0x2005fd5a "Reading from file %s (fd %d)"

LATC_OUTSIZE 0x2008675b "Data block is too large to fit into a datagram (%d < %d)"

LATC_MAPLESS 0x200a1fab "This type (%d) has no map associated with it (singleton)"

LATC_SHORTBUF 0x200a64df "Unexpected end of buffer"

LATC_MIXDLRD 0x200ad97b "The LRD contains a LATC component inside a non-LATC component"

LATC_FULLBUF 0x200b19df "Buffer full"

LATC_VERSION 0x200bedc7 "Bad file version %d:%d (current is %d:%d)"

LATC_BADREAD 0x200c9ddb "Error reading file with fd %d"

LATC_BADSIZE 0x200ca35b "Blocks written to file must be at multiples of unsigned shorts"

LATC_BADTYPE 0x200ca7fb "Unknown type %d"

LATC_BADADDR 0x200caf27 "Bad address for type %d (depth %d), out of range (%d => %d)"

LATC_BADINIT 0x200cb4cf "Failed to initialise the %s structure"

LATC_BADFORM 0x200cc1db "Bad format string"

LATC_WRITETO 0x200cf716 "Writing file %s"

LATC_LATEDFLT 0x20104b8d "Default value for %s encountered after exception value"

LATC_ENDOFILE 0x20136df9 "End of file"

LATC_NOSPECAL 0x20141723 "This type (%s) has no non-default data to write"

LATC_NODESTIN 0x20151c77 "No destination to copy to"

LATC_NOBUFFER 0x2016c0a7 "Missing buffer"

LATC_OUTOFRNG 0x2021f8bb "Address cpt (%d) for type %d is out of range (%d >= %d)"

LATC_OVERFLOW 0x20250c5b "Attempting to build filename that exceeds limits"

LATC_FAILAPPL 0x20288bb3 "Application of the configuration had errors"

LATC_FAILDISC 0x202890a3 "Discovery of the configuration had error"

LATC_XSRSTITM 0x202fa1bb "Excess result items in the result list"

LATC_BADSPLIT 0x2032948d "Layer %d in tower %d had bad GTFE mode registers %08x"

LATC_BADALLOC 0x2032ad13 "Failed to allocate %d bytes"

LATC_BADALIGN 0x2032b0d7 "Memory block |%s| is not correctly aligned"

LATC_BADAPPLY 0x2032cf65 "Error trying to apply a configuration to the LAT, register %d"

LATC_BADINDEX 0x2032d51f "Index is larger than the number of instances %d > %d"

LATC_BADDISCO 0x2032e2e5 "Error trying to discover a LAT configutation, register %d"

LATC_BADCLOSE 0x2032f29b "Failed to close file with fd %d"

LATC_BADFIELD 0x203308ab "Index is larger than the number of fields %d > %d"

LATC_BADFOPEN 0x20331017 "Failed to open file %s"

LATC_BADPARAM 0x203310bb "Function called with bad (NULL?) parameter |%s| "

LATC_BADVALUE 0x2033244b "String contains invalid numeric characters"

LATC_BADWRITE 0x20332f6b "Error writing file with fd %d"

LATC_BADBCAST 0x203337ef "Bad address, mixture of bcast and unicast in address (%d, %d, %d, %d)"

LATC_BADWIDTH 0x2033471f "Don't know how to handle a register of width %d"

LATC_WRITONLY 0x2033e9a7 "File with fd %d cannot be read from, since it was opened write-only"

LATC_XMLPARSE 0x2038ef9b "Failure of the XLX parser"

Name	Value	Associated formatting string
`LATC_TEMCR`	`0x20002487`	`"The command and response masks for the TEMs differ %04x %04x"`
`LATC_LLRNG`	`0x20003dbb`	`"Value specified (0x%08x%08x) exceeds range of register field (%d bits)"`
`LATC_NOMAP`	`0x20005713`	`"Missing map"`
`LATC_NOCPT`	`0x2000578f`	`"The component %d does not have configuration data"`
`LATC_REPORT`	`0x2000765e`	`"%s"`
`LATC_SHTRNG`	`0x200090bb`	`"Value specified (0x%04x) exceeds range of register field (%d bits)"`
`LATC_RTRVMAP`	`0x2000aa12`	`"Retrieving %s map"`
`LATC_SUMERR`	`0x2000c997`	`"Summary error bit set in result"`
`LATC_LNGRNG`	`0x20011fbb`	`"Value specified (0x%08x) exceeds range of register field (%d bits)"`
`LATC_LAYDIF`	`0x20012d8f`	`"The cached and captured configurations differ for %s (%d, %s, %d)"`
`LATC_NOTSET`	`0x2001386f`	`"Node %d %d is not set"`
`LATC_NOTVXW`	`0x200145b9`	`"Function to interact with LAT called on a host system"`
`LATC_NOADDR`	`0x20014b27`	`"Unaddressable type %d"`
`LATC_NODATA`	`0x2001522f`	`"No data to write"`
`LATC_NOIMPL`	`0x20015733`	`"Function not implemented"`
`LATC_NOFUNC`	`0x20016093`	`"No function pointer for this operation %d %d"`
`LATC_DIFFER`	`0x20022ca7`	`"The cached and captured configurations differ for %s (%d, %d, %d, %d)"`
`LATC_RTRVDATA`	`0x20029e2e`	`"Retrieving %s data"`
`LATC_PARITY`	`0x2002c3d7`	`"Parity error bit set in result"`
`LATC_BADSTR`	`0x200326b7`	`"No type named %s"`
`LATC_BADREG`	`0x200327cb`	`"Index is larger than the number of registers %d > %d"`
`LATC_BADLAY`	`0x20032a97`	`"Bad layer information (%c should be %s)"`
`LATC_SUCCESS`	`0x200333a8`	`"Success"`
`LATC_LSFREAD`	`0x2003b1db`	`"Error reading file %s"`
`LATC_NOWRITE`	`0x20059f6b`	`"This type (%s) has only a single leaf and is thus written as part of the default structure"`
`LATC_READONLY`	`0x2005f5a7`	`"File with fd %d cannot be written to, since it was opened read-only"`
`LATC_READFROM`	`0x2005fd5a`	`"Reading from file %s (fd %d)"`
`LATC_OUTSIZE`	`0x2008675b`	`"Data block is too large to fit into a datagram (%d < %d)"`
`LATC_MAPLESS`	`0x200a1fab`	`"This type (%d) has no map associated with it (singleton)"`
`LATC_SHORTBUF`	`0x200a64df`	`"Unexpected end of buffer"`
`LATC_MIXDLRD`	`0x200ad97b`	`"The LRD contains a LATC component inside a non-LATC component"`
`LATC_FULLBUF`	`0x200b19df`	`"Buffer full"`
`LATC_VERSION`	`0x200bedc7`	`"Bad file version %d:%d (current is %d:%d)"`
`LATC_BADREAD`	`0x200c9ddb`	`"Error reading file with fd %d"`
`LATC_BADSIZE`	`0x200ca35b`	`"Blocks written to file must be at multiples of unsigned shorts"`
`LATC_BADTYPE`	`0x200ca7fb`	`"Unknown type %d"`
`LATC_BADADDR`	`0x200caf27`	`"Bad address for type %d (depth %d), out of range (%d => %d)"`
`LATC_BADINIT`	`0x200cb4cf`	`"Failed to initialise the %s structure"`
`LATC_BADFORM`	`0x200cc1db`	`"Bad format string"`
`LATC_WRITETO`	`0x200cf716`	`"Writing file %s"`
`LATC_LATEDFLT`	`0x20104b8d`	`"Default value for %s encountered after exception value"`
`LATC_ENDOFILE`	`0x20136df9`	`"End of file"`
`LATC_NOSPECAL`	`0x20141723`	`"This type (%s) has no non-default data to write"`
`LATC_NODESTIN`	`0x20151c77`	`"No destination to copy to"`
`LATC_NOBUFFER`	`0x2016c0a7`	`"Missing buffer"`
`LATC_OUTOFRNG`	`0x2021f8bb`	`"Address cpt (%d) for type %d is out of range (%d >= %d)"`
`LATC_OVERFLOW`	`0x20250c5b`	`"Attempting to build filename that exceeds limits"`
`LATC_FAILAPPL`	`0x20288bb3`	`"Application of the configuration had errors"`
`LATC_FAILDISC`	`0x202890a3`	`"Discovery of the configuration had error"`
`LATC_XSRSTITM`	`0x202fa1bb`	`"Excess result items in the result list"`
`LATC_BADSPLIT`	`0x2032948d`	`"Layer %d in tower %d had bad GTFE mode registers %08x"`
`LATC_BADALLOC`	`0x2032ad13`	`"Failed to allocate %d bytes"`
`LATC_BADALIGN`	`0x2032b0d7`	`"Memory block \|%s\| is not correctly aligned"`
`LATC_BADAPPLY`	`0x2032cf65`	`"Error trying to apply a configuration to the LAT, register %d"`
`LATC_BADINDEX`	`0x2032d51f`	`"Index is larger than the number of instances %d > %d"`
`LATC_BADDISCO`	`0x2032e2e5`	`"Error trying to discover a LAT configutation, register %d"`
`LATC_BADCLOSE`	`0x2032f29b`	`"Failed to close file with fd %d"`
`LATC_BADFIELD`	`0x203308ab`	`"Index is larger than the number of fields %d > %d"`
`LATC_BADFOPEN`	`0x20331017`	`"Failed to open file %s"`
`LATC_BADPARAM`	`0x203310bb`	`"Function called with bad (NULL?) parameter \|%s\| "`
`LATC_BADVALUE`	`0x2033244b`	`"String contains invalid numeric characters"`
`LATC_BADWRITE`	`0x20332f6b`	`"Error writing file with fd %d"`
`LATC_BADBCAST`	`0x203337ef`	`"Bad address, mixture of bcast and unicast in address (%d, %d, %d, %d)"`
`LATC_BADWIDTH`	`0x2033471f`	`"Don't know how to handle a register of width %d"`
`LATC_WRITONLY`	`0x2033e9a7`	`"File with fd %d cannot be read from, since it was opened write-only"`
`LATC_XMLPARSE`	`0x2038ef9b`	`"Failure of the XLX parser"`