GLAST / LAT > DAQ and FSW > FSW > Doxygen Index> LCBD / V1-5-1 > lcbd / rad750
31
, 0x1f
). More...
31
, 0x1f
).
#define
statements for the codes in message facility LCBD. The following table provides the equivalences between the #define
name, the #define
value and the associated formatting string. For the complete LCBD message facility data definition, see MSG_FacList_LCBD
and MSG_MsgList_LCBD
.
Name | Value | Associated formatting string |
LCBD_RUNDX | 0x0f802a9d | "Result item, LATp undefined error %0x%08x" |
LCBD_RUND3 | 0x0f802abd | "Result item, LATp undefined error 3" |
LCBD_RUND7 | 0x0f802acd | "Result item, LATp undefined error 7" |
LCBD_RTOERR | 0x0f803895 | "Result item, LATp timeout error" |
LCBD___OK | 0x0f804348 | "Success" |
LCBD_NOCLK | 0x0f805679 | "No 20MHz LATp side clock present" |
LCBD_RIUND4 | 0x0f8096c3 | "Result in-bound, Undefined status #4, descriptor 0x%08x" |
LCBD_RIUND5 | 0x0f8096c7 | "Result in-bound, Undefined status #5, descriptor 0x%08x" |
LCBD_RIUND6 | 0x0f8096cb | "Result in-bound, Undefined status #6, descriptor 0x%08x" |
LCBD_RIUND7 | 0x0f8096cf | "Result in-bound, Undefined status #7, descriptor 0x%0x08x" |
LCBD_RTRUNRN | 0x0f809885 | "Result item, LATp transmit underrun error" |
LCBD_ROUND4 | 0x0f809ac3 | "Result out-bound, Undefined status #4, descriptor %0x08x" |
LCBD_ROUND6 | 0x0f809acb | "Result out-bound, Undefined status #6, descriptor %0x08x" |
LCBD_RDPERR | 0x0f80a395 | "Result item, LATp cell parity error" |
LCBD_RHPERR | 0x0f80a795 | "Result item, LATp header parity error" |
LCBD_NOROOM | 0x0f813d59 | "No room to add the specified PCI/LATP allowable version numbers" |
LCBD_ENBDSB | 0x0f814857 | "Attempt to both enable and disable an interrupt source %x" |
LCBD_RESFORK | 0x0f81520b | "Response FORK creation failed %x" |
LCBD_EIUND1 | 0x0f8166b5 | "Event receive, Undefined error #1, descriptor 0x%08x" |
LCBD_EOUND4 | 0x0f816ac3 | "Event transfer, Undefined error #4, descriptor 0x%08x" |
LCBD_EOUND6 | 0x0f816acb | "Event transfer, Undefined error #6, descriptor 0x%08x" |
LCBD_AIBSEM | 0x0f817eeb | "Asynch semaphore creation failed" |
LCBD_AIBCAN | 0x0f818625 | "Asynch initialization operation cancelled" |
LCBD_AIBCOM | 0x0f818718 | "Asynch initialization operation completed" |
LCBD_REQFULL | 0x0f821031 | "Request queue is full" |
LCBD_RINVLST | 0x0f82232d | "Result item, LATp invalid or inconsistent list" |
LCBD_UNINIT | 0x0f8260cd | "Driver is uninitialized" |
LCBD_RIPCITA | 0x0f82866f | "Result in-bound, PCI target abort, descriptor 0x%08x" |
LCBD_RIPCIMA | 0x0f82885f | "Result in-bound, PCI master abort, descriptor 0x%08x" |
LCBD_RIPCIPE | 0x0f8288bb | "Result in-bound, PCI parity error, descriptor 0x%08x" |
LCBD_ROPCITA | 0x0f82966f | "Result out-bound, PCI target abort, descriptor 0x%08x" |
LCBD_ROPCIMA | 0x0f82985f | "Result out-bound, PCI master abort, descriptor 0x%08x" |
LCBD_ROPCIPE | 0x0f8298bb | "Result out-bound, PCI parity error, descriptor 0x%08x" |
LCBD_UCBRWI | 0x0f82c0c3 | "UCB PBS/RW_init failed with code %d" |
LCBD_UCBRWD | 0x0f82c0cb | "UCB PBS/RW_destroy failed with code %d" |
LCBD_PIDIRQ | 0x0f8300d7 | "Unable to connect PID interrupt handler" |
LCBD_PCIREV | 0x0f8319d3 | "PCI FPGA revision number 0x%2x is not supported by this driver" |
LCBD_PCIIRQ | 0x0f831ed7 | "Unable to connect PCI interrupt handler" |
LCBD_STATSIFL | 0x0f83c663 | "Unable to initialize statistics block" |
LCBD_NTFYTSK | 0x0f84269b | "Unable to create notification service task" |
LCBD_NTFYSEM | 0x0f8426eb | "Unable to create semaphore for notification control block" |
LCBD_EITRUNC | 0x0f851691 | "Event receive, LATp truncate error, descriptor 0x%08x" |
LCBD_EIDPERR | 0x0f859395 | "Event receive, LATp cell parity error, descriptor 0x%08x" |
LCBD_EOPCITA | 0x0f85d66f | "Event transfer, PCI target abort, descriptor 0x%08x" |
LCBD_EOPCIMA | 0x0f85d85f | "Event transfer, PCI master abort, descriptor 0x%08x" |
LCBD_EOPCIPE | 0x0f85d8bb | "Event transfer, PCI parity error, descriptor 0x%08x" |
LCBD_AIBTASK | 0x0f85fb9b | "Asynch initialization task creation failed %x" |
LCBD_ISRRSTQ | 0x0f862677 | "The ISR RESULT FORK queue was not set before enabling" |
LCBD_ISREVTQ | 0x0f863df7 | "The ISR EVENT FORK queue was not set before enabling" |
LCBD_EVTFORK | 0x0f86760b | "Event FORK creation failed %x" |
LCBD_DRNRSTF | 0x0f86c63f | "Found %d outstanding operations in the result FIFO" |
LCBD_DRNNPCI | 0x0f86dd63 | "Could not drain ques, PCI side not initialized" |
LCBD_DRNEVTF | 0x0f86ddbf | "Found %d outstanding operations in the event FIFO" |
LCBD_INSEBUF | 0x0f86f3df | "Insufficient memory to allocate event buffer" |
LCBD_INVEBUF | 0x0f879bdf | "Invalid event buffer %8.8x" |
LCBD_OFFLINE | 0x0f890f09 | "Driver is offline" |
LCBD_ROQEMPTY | 0x0f8ab4d7 | "Result out-bound, Result queue empty 0x%08x" |
LCBD_ROBUFEMP | 0x0f8abd43 | "Result out-bound, Intermediate LCB FIFO buffer empty, descriptor 0x%08x" |
LCBD_FCBMTXI | 0x0f8b9a13 | "PBS/MTX_init failed for event fcb code = %8.8x" |
LCBD_FCBMTXD | 0x0f8b9a1b | "PBS/MTX_destroy failed for event fcb code = %8.8x" |
LCBD_FPGAREV | 0x0f8bf8d3 | "FPGA revision numbers combination PCI=0x%2x LATp=0x%2x is not support by this driver" |
LCBD_PIDIRQD | 0x0f8c03bb | "Unable to disconnect PID interrupt handler" |
LCBD_PCIIRQD | 0x0f8c7bbb | "Unable to disconnect PCI interrupt handler" |
LCBD_PCIFAIL | 0x0f8c8873 | "Unable to detect PCI board with vendorID 0x%04x, deviceID 0x%04x" |
LCBD_NTFYNFND | 0x0f90aafb | "Unable to locate the nut on the que head" |
LCBD_NTFYMTXI | 0x0f90ba13 | "Unable to create mutex for NUT que" |
LCBD_NTFYMTXD | 0x0f90ba1b | "Unable to destroy mutex for NUT que, code = %8.8x" |
LCBD_NULEVTCB | 0x0f966777 | "Event callback handler specified as NULL" |
LCBD_EOQEMPTY | 0x0f97b4d7 | "Event transfer, Event queue empty 0x%08x" |
LCBD_EOBUFEMP | 0x0f97bd43 | "Event transfer, Intermediate LCB FIFO buffer empty, descriptor 0x%08x" |
LCBD_INVPROTO | 0x0f9ea7d7 | "Invalid Protocol number, protocol = %d > 3" |
LCBD_CLTOOBIG | 0x0fa3ba6b | "Command List length is too big, length = 0x%08x" |
LCBD_CLMISALN | 0x0fa586b7 | "Command List is misaligned, list = 0x%08x" |
LCBD_PCIMAPLP | 0x0fb22263 | "Unable to map local address to PCI memory" |
LCBD_PCIMAPPL | 0x0fb223b3 | "Unable to map PCI memory to local address" |