GLAST / LAT > DAQ and FSW > FSW > Doxygen Index> LCI / V6-1-0 > LCI_test / sun-gcc
Message definitions for message facility LCI (ID: 144
, 0x90
)
More...
Message definitions for message facility LCI (ID: 144
, 0x90
)
LCI_msgs.h provides all the #define
statements for the codes in message facility LCI. The following table provides the equivalences between the #define
name, the #define
value and the associated formatting string. For the complete LCI message facility data definition, see MSG_FacList_LCI
and MSG_MsgList_LCI
.
Name | Value | Associated formatting string |
LCI_STATS | 0x48000efa | "Statistics - cycles: %d, acquires: %d (%d/%d), events: %d" |
LCI_STATE | 0x48000f2b | "Incorrect state (%d); should be %d" |
LCI_NODB | 0x48001597 | "Failed to locate the required configuration database" |
LCI_RANGE | 0x4800191b | "Specified or derived value (%d) is out of range at line %d" |
LCI_TEMCR | 0x48002487 | "The command (%04x) and response (%04x) masks for the TEMs differ" |
LCI_MODE | 0x48002a1b | "Unknown calibration mode (%s)" |
LCI_NOLCB | 0x480052b7 | "No LCB control block returned by LCBD_get()" |
LCI_REPORT | 0x4800765e | "%s" |
LCI_FREAD | 0x480091db | "File '%s' read failed" |
LCI_FINAL | 0x4800a863 | "Calibration failed with status 0x%08x" |
LCI_FOPEN | 0x4800b017 | "File '%s' failed to open for %s" |
LCI_QITEM | 0x4800de2b | "Failed to allocate an ITC queue item" |
LCI_PERIOD | 0x4802c0f9 | "Specified period (%d) is too short; set to minimum (%d)" |
LCI_FCLOSE | 0x4802c29b | "Failed to close file" |
LCI_FWRITE | 0x4802ff6b | "File write failed" |
LCI_SUCCESS | 0x480333a8 | "Success" |
LCI_ATTRIBS | 0x480405db | "Missing task attributes" |
LCI_LOSTEVT | 0x4804a14f | "Expected events (%d) failed to arrive" |
LCI_NULLCFG | 0x480596db | "No events specified in configuration %d" |
LCI_ABORTED | 0x4806f70b | "Calibration aborted by command" |
LCI_SEMCFAIL | 0x48084873 | "Failed to create semaphore" |
LCI_MSSGTAG | 0x4808d45b | "Tag '%s' is missing from configuration %d" |
LCI_DFLTTAG | 0x4808e559 | "Value for missing tag '%s' defaulted to 'LATC' in configuration %d" |
LCI_CLLUEXP | 0x48091813 | "Unexpected event arrived on the LCB" |
LCI_CLLFULL | 0x48091c33 | "Collection storage full, %d required, %d free" |
LCI_VERSION | 0x480bedc7 | "Bad file type (%d) or version (%d:%d); current is %d:%d" |
LCI_BADSIZE | 0x480ca35b | "Calculated contribution length (%d) does not match actual (%d)" |
LCI_BADCFGS | 0x480cc36b | "File contains invalid configuration(s)" |
LCI_BADVALS | 0x480cc88b | "Tag(s) with invalid value(s) found in configuration %d" |
LCI_ENDOFILE | 0x48136dfb | "End of file" |
LCI_NODOCTYP | 0x481567f3 | "Required DOCTYPE declaration not found" |
LCI_INCPLTAG | 0x481dee5b | "Iterator tag '%s' is not completely specified at line %d" |
LCI_INVDOCTP | 0x481e89d3 | "DOCTYPE declaration has invalid type (%s)" |
LCI_OVERSIZE | 0x4824ef5b | "Compressed event was too large to add to any datagram" |
LCI_DUPLSPEC | 0x4824fd63 | "Iterator tag '%s' contains duplicate specification at line %d" |
LCI_DGMFLUSH | 0x482740cf | "Attempt to flush a datagram caused an error" |
LCI_MEMERROR | 0x4827dad7 | "Failed to allocate %d bytes of memory" |
LCI_XMLPARSE | 0x4838ef9b | "Failure of the XLX parser" |
LCI_WUTSTART | 0x483a7edf | "Failed to start the wake-up timer; WUT was in state %d" |
LCI_WUTDFAIL | 0x483b0073 | "Failed to destroy wake-up timer; WUT was in state %d" |
LCI_WUTCFAIL | 0x483b1873 | "Failed to create wake-up timer" |