#============================================================================== # # Abs: LCLS GTR Waveform records # # Name: gtrwaveformBSA.template # Author: Shantha Condamoor (scondam) # # Associated Display: gtrWaveform.edl # # Rem: This file added has more macros to the original gtrwaveform.db file that was # bundled in the EPICS package gtr2-3 # In the IOC application, use substitutions for expanding the macros. # # Macros: # Note: 'dev', 'area' and 'position' together identify a specific, accessbile device. # 'name' and 'card' together identify a specific, controllable gtr module. # dev Name of the gtr (ADC) device. (DeviceType) # Example: For SIS3300, which is a Fast ADC, use FADC. # area Location of your IOC that houses this gtr (ADC) device. (Area) # It describes one of the 21 areas currently in the LCLS Accelerator. # Example: For an IOC located in the beam dump on Line 1, use DMP1 # position Formed as (1 char optional) Position Prefix and (3 char) Position Code. # If Position Prefix is unspecified, it indicates Beam Line (B). # Position Code roughly indicates the position of the device in the area. # Example: 100 means that the device is roughly position i the first 10% of its area. # name The name of the associated transient driver. # The name is read from the driver during record initialization. # This should match with the name in the startup script st.cmd # card The card (link) number of the particular (digital adc) recorder starting with 1. # The card number must match the value specified in the driver xxxConfig. # Example: 'card' specified in sisfadcConfig() command in the application startup script st.cmd. # signal The input signal number # Example: 0-7 for SIS3300 # size The number of samples to acquire # Example: 8000 # type The waveform record data type. # Example: SHORT # desc Description. # Example Include SIS Type name in the description if applicable as sis3300 # tse Setting this field to a specific event code forces to set the timestamp in the gtrwaveform record by # setting TSE=event-code-that triggered the waveform and setting the VME IRQ # for that event code from the EVR triggers page (and in the proper substitutions file). # This is a work-around proposed by Stephanie Allison for BSA for waveform records. # This solution will work only for slow trigger rates and is not guaranteed for higher rates. # #============================================================================== record(waveform,"$(dev):$(area):$(position):$(name)waveform$(signal)") { field(DESC, "CH$(signal) $(desc) Waveform") field(DTYP,"GTR") field(INP,"#C$(card) S$(signal) @readData") field(SCAN,"I/O Intr") field(PRIO, "HIGH") field(NELM,"$(size)") field(FTVL,"$(type)") field(TSE, "$(tse)") # field(FLNK, "$(FLNK)") }