/***************************************************************************\ * $Id: IDIMTest.c,v 1.3 2011/02/23 07:31:40 rcs Exp $ * File: IDIMTest.c * Author: Sheng Peng * Email: pengsh2003@yahoo.com * Phone: 408-660-7762 * Company: RTESYS, Inc. * Date: 03/2007 * Version: 1.0 * * EPICS driver for IDIM * \***************************************************************************/ #include "drvPSCDLib.h" #include "devIDIM.h" #include "slc_macros.h" #include "cam_proto.h" #include #if 0 The format of the CAMAC control word, CTLW is as follows: (ref: SLC Basic Users Guide (BUG) for additional information) http://www.slac.stanford.edu/grp/cd/soft/wwwman/bug.www/chapter9.html Bits 0-3 = AAAA = Module subaddress. 4 = RE_PACK = Re_pack data into smaller blocks. 5 = P8 = 8-bit pack mode. (See Pack Modes below). 6 = x = Not used (yet). 7-11 = NNNNN= Station address (slot) 12-15 = CCCC = Crate address 16-20 = FFFFF= CAMAC function code. 21-23 = SSS = Enables scan mode counters. (See Scan Modes below.) 21 = SA = Enable subaddress counter. 22 = SN = Enable station address counter. 23 = SC = Enable crate counter. 24-25 = II = Scan Increment mode (see Scan Modes below). 24 = ILQ = Increment enabled counters only if Q=0. 25 = IN = Reset least significant enabled counter and increment next most significant enabled counter if X=0. 26 = P24 = 24-bit pack mode. (See Pack Modes below). 27-30 = XXQQ = Transfer/terminate mode (See Scan modes below.) 27 = QM2 = Terminate packet if Q=0. 28 = QM1 = Transfer data if Q=1. 29 = XM2 = Terminate packet if X=0. 30 = XM1 = Transfer data if X=1. 31 = MPC = 0 if last packet of package; otherwise More Packets Coming. #endif extern struct PSCD_CARD pscd_card; typedef struct STAS_DAT { UINT32 stat; UINT32 data; } STAS_DAT; UINT32 IDIM_Test() { UINT32 rtn = 0; /* check if module exists */ if(isModuleExsit(0, 5, 16)) { void *pkg_p; /* A camac package */ vmsstat_t iss; UINT16 bcnt = 4; UINT16 emask= 0xE0E0; UINT32 ctlwF0A0 = 0x00005200; UINT32 ctlwF0A1 = 0x00005201; STAS_DAT read_idim[2]; UINT16 nops = 0; nops = 2; /** Allocate package for IDIM reset */ if (!SUCCESS(iss = camalol (&nops, &pkg_p))) { errlogPrintf("camalol error %s\n",cammsg(iss)); rtn = (IDIM_CAM_ALLOC_FAIL|iss); goto egress; } read_idim[0].data = 0; read_idim[1].data = 0; bcnt = 4; if (!SUCCESS(iss = camadd (&ctlwF0A0, &read_idim[0], &bcnt, &emask, &pkg_p))) { errlogPrintf("camadd error %s\n",cammsg(iss)); rtn = (IDIM_CAM_ADD_FAIL|iss); goto release_campkg; } if (!SUCCESS(iss = camadd (&ctlwF0A1, &read_idim[1], &bcnt, &emask, &pkg_p))) { errlogPrintf("camadd error %s\n",cammsg(iss)); rtn = (IDIM_CAM_ADD_FAIL|iss); goto release_campkg; } if (!SUCCESS(iss = camgo (&pkg_p))) { errlogPrintf("camgo error %s\n",cammsg(iss)); rtn = (IDIM_CAM_GO_FAIL|iss); goto release_campkg; } printf("Raw: L:0x%08X H:0x%08X\n", read_idim[0].data, read_idim[1].data); release_campkg: if (!SUCCESS(iss = camdel (&pkg_p))) errlogPrintf("camdel error %s\n",cammsg(iss)); } else rtn = IDIM_MODULE_NOT_EXIST; egress: return rtn; } epicsRegisterFunction(IDIM_Test);