#============================================================== # Name: RELEASE_NOTES # # Abs: Release notes for the LCLS masterSource IOC Application. #-------------------------------------------------------------- R2.1.7 June 2, 2022 M. Dunning Add alarm states for loop lock enable/disable PV Add MS/MSI flags to loop PVs R2.1.6 May 23, 2022 M. Dunning Add attenuator setpt-target mismatch alarm Merge src/*.dbd files into single support file R2.1.5 Mar 18, 2022 M. Dunning Add autosave to amp/attenuator PVs Adjust L0-L1 Ret amp and L2 Ret amp initial ramp values R2.1.4 Jan 10, 2022 M. Dunning Add soft matlab records for Charley's freq locker script Rename locker/pll db files to be more generic Upgrade yamlLoader due to CHECK_RELEASE conflict Adjust L2CID-04 water flow alarm limits R2.1.3 Aug 19, 2021 M. Dunning Add amp/attenuator alarm summaries Adjust atten target setpoints per A. Benwell R2.1.2 Jun 15, 2021 M. Dunning - Update L2 slave IP address R2.1.1 May 10, 2021 M. Dunning - Upgrade nearly all support modules - Add modbus module for new version of bkhAsyn - Changes to startup and db files for new version of bkhAsyn - Comment out unused function in procRingBuffer.c to get rid of compiler warnings R2.1.0 Mar 17, 2021 M. Dunning - Add amp/attenuator seq routine - Add FWD power trip monitor - Add power conversion constants - Add more archiving - Update ms02 (CID) digital input channels to match installation - Update bechoff low-level channel descriptions - Remove ms02 (CID) KL3222 RTD module which was not installed R2.0.0 Feb 3, 2021 M. Dunning - Reorganize IOCs and change names - General cleanup - Add more archiving - Add attenuator ramp and fault monitor R1.2.2 Dec 18, 2020 M. Dunning - Add auto-archiving R1.2.1 Nov 12, 2020 M. Dunning - Fix water temp and flow PVs for sioc-b084-ms02 dev IOC R1.2.0 Feb 18, 2020 K. Kim - name change sys2 to sys0 to meet naming convention - support to buildroot-2019.08 - support epics R7.0.3.1-1.0 - build with recent modules: cpsw/framework R4.4.1 yaml-cpp-0.5.3_boost-1.64.0 boost 1.64.0 iocAdmin R3.1.16-1.2.0 miscUtil R2.2.5 streamdevice R2.8.9-1.1.0 autosave R5.8-2.1.0 seq R2.2.4-1.2 caPutLog R3.5-1.0.0 ycpswasyn R3.3.1 yamlLoader R2.1.0 agilent53220A R1.0.4 bkhasyn R0.2.0 - SYS name change for config yaml file - Notde name change for Beckhoff bus coupler R1.1.5 Mar 12, 2019 M. Dunning - Update bkhAsyn version to R0.1.3 - Add dev IOCs sioc-b084-ms01 and sioc-b084-ms02 for B84 RF lab testing R1.1.4 Feb 20, 2019 Kukhee Kim - build with Agilent93220A R1.0.3 to add up new commands for frequency counter R1.1.3 Feb 19, 2019 Kukhee Kim - Activate autosave for frequency locker (sioc-sys2-ms01) R1.1.2 Feb 12, 2019 Kukhee Kim - ring buffer size 1024 R1.1.1 Feb 12, 2019 Kukhee Kim - multiple ring buffer instances: fault buffer (hardware trigger) + 2 ondemand buffers - update edm screens for the new debugging features R1.1.0 Feb 5, 2019, Kukhee - add ring buffer (fault buffer, hardware trigger) - high speed sampling for phase error and LED status - add ondemand logic for ring buffer - add unlock counter and reset logic R1.0.7 Dec 19, 2018, Kukhee Kim - add thress separated LED PVs: ERROR, Lock, ADC Amplitude - put alarm severity for the three LEDs - add Tx/Rx Frame counter and RxError Counter for debugging SIM communication R1.0.6 Oct 30, 2018, Kukhee Kim - merge with Mike Dunnings Beckhoff branch - new yaml files for RPL SIM module - reflect new registers on PRL related ioc and EDM screen ############################################################### ### The branch without_beckhoff has been merged into master ### ############################################################### R1.0.5 Aug-24-2018, M. Dunning (mdunning) - Add Beckhoff support; add Beckhoff config to sioc-sys2-ms02 ################################################################## ############## Activities in without_beckhoff branch ############# ################################################################## R1.0.4 Sep-25-2018, Kukhee Kim - update config yaml file to make TxRate is 5kHz as a default - inherit R1.0.4 preparation before the branch Branch out to without_beckhoff branch - master brach : Mike Dunning works for Beckhoff (RF power amplifier interface and attenuator interface) - without_beckhff : Kukkhee Kim works for data conversion and communication intialization for SIM modules. R1.0.4 release has been postponed to add up data conversion PVs also need to branch out to more test. R1.0.4 Aug-22-2018, Kukhee Kim (KHKIM) - prepare yaml configuration for PRL SIM module (initiate the communication) - change PV PREFIX for Frequency Counter - Update yaml files for PRL slave SIM module ###################################################################### ###################################################################### R1.0.3 Jul-31-2018, Kukhee Kim (KHKIM) - add new yaml files for PRL SIM modules - make online Frequency Locker SIM module R1.0.2 Jul-19-2018, Kukhee Kim (KHKIM) - prepare sioc-sys2-ms01 for frequency locker for LCLS2 production (EIC) - bump up to: asyn/R4.32-1.0.0 streamdevice/R2.7.7-1.4.2 agilent53220A/R1.0.2 yamlLoader/R1.1.0 ycpswasyn/R3.0.2 cpsw/framework/R3.6.4 - make application cramable - use yamlLoader to get the root path - change YCPSWASYNConfig() command to reflect new syntax - add iocAdmin database and iocRelease R1.0.1 Jul-18-2018, Kukhee Kim (KHKIM) for Vasquez S. Jesus - Initial Import from Jesus's SIM application