Release RF-R0-2-78 S.Hoobler 27-May-2025 Still FEED tag R0.3.03 Still lcls2_llrf tools 851a1a81 and prc firmware 851a1a81 BUT res_ctl firmware reverted to 8e92dd25 Add PRL tracking for Sector diagnostic PRC Changes to sioc-sys0-rf18 DO NOT use tags RF-R0-2-75, RF-R0-2-76 Release RF-R0-2-77 S.Hoobler 01-May-2025 Still FEED tag R0.3.03 Still lcls2_llrf tools 851a1a81 and prc firmware 851a1a81 BUT res_ctl firmware reverted to 8e92dd25 Problem during autosetup centering piezo Fix register name typos in prlTracking databases Was previously reading forward registers into both forward and reverse records (and writing, but we never used the write records in practice) Release RF-R0-2-76 S.Hoobler 29-Apr-2025 Still FEED tag R0.3.02 Still lcls2_llrf tools 851a1a81 and prc/res_ctl firmware 851a1a81 Move HWMODE logging from sioc-sys0-rf13 to individual CM IOCs. CA link pushing log message to remote IOC was causing INVALID LINK status for HWMODESUB_ Release RF-R0-2-75 S.Hoobler 14-Apr-2025 Still FEED tag R0.3.02 Set all CMs to use lcls2_llrf tools and prc/res_ctl firmware 851a1a81: RFApp/conf/lcls/launcher_l*b-rf*.conf.substitutions Picks up harmonize_app_top lcls2_llrf branch changes Includes restructuring of rack checkout for Marble and other faciliites (also fewer python calls) And changes to res_ctl<->rfs chitchat communication Note that this is first time we have updated prod resonance firmware in multiple years because of changed behavior in chitchat status bits Release RF-R0-2-74 S.Hoobler 03-Mar-2025 FEED tag R0.3.02 New EPICS records to host piezo gain--full gain if both channels active, and gain based on actual active channels Fix for chitchat error latch Modify watchdog for updating waveforms that affects status of RFSTATE, RFMODE, and others Archiving of new piezo gain PVs. Changes to: RFApp/srcArchive/common/rf/cav_pzt.tpl-arch Release RF-R0-2-73 S.Hoobler 05-Nov-2024 FEED tag R0.3.01 PRL tracking diagnostics (same as in branched release below) Release RF-R0-2-72-prl S.Hoobler 18-Nov-2024 RF branch prl_phase_diag FEED branch prl_phase_diag Test new PRL diagnostics: non-integer readback of PRL offset diff of offset and zero phases (LO drift?) visual diagnostic showing phases Release RF-R0-2-72 S.Hoobler 05-Nov-2024 FEED tag R0.3.00 Fixes related to clip limit status (temporarily fixed in release below). Remove corresponding dbpfs from iocBoot/common/common_end_all_st.cmd Pick up PIP2 changes Pick up leep changes by LD to match bedrock Pick up src/rf changes by LD, minor, style Use dbpfs to force ADES.DRVL to slightly negative to prevent condition in which DRVH=DRVL=0 and there is no effective limit. Changes to: iocBoot/common/common_end_all_st.cmd Update LLRF_TOP and PRCFW to use version 72853320 Changes to RFApp/conf/lcls/* Fix typo in state definitions of PRLSUM_RFS Change to RFApp/Db/srf/statCavPrl.template Add Binh Nguyen to LLRF CAS group Release RF-R0-2-71 S.Hoobler 04-Nov-2024 Still FEED tag R0.2.28 IMPORTANT - to revert firmware that had problem with interlock status readback: Revert PRCFW and LLRF_TOP to f9902241 Changes to RFApp/conf/lcls/* Local temporary dbpfs for clip limit statuses. Proper fix will be in next release. Add dbpfs to set alarm limits and severities for - Add archiving of 1 Hz BSA PVs To consider cavity under feedback control, add CHIRP_ONLY case, which is used for bunch length feedback. This widens the phase alarm limits for additional cavities. Changes to: RFApp/Db/srf/phaseAlarmCav.template Add PVs to support SEL phase offset optimizer program New files: RFApp/Db/srf/selPoffOptimizerCav.template selPoffOptimizerCm.substitutions Changes to: RFApp/Db/srf/Makefile srcArchive/common/rf/cav_base.tpl-arch iocBoot/common/common_db.cmd Release RF-R0-2-70 S.Hoobler 25-Sep-2024 Still FEED tag R0.2.28 RFApp/conf/lcls/rf_control_launcher_sys0-rf11.conf: For L1B and L2B systems, add missing argument to recently updated rfRackTestLcls2Prc.sh. This prevents it trying to lock to the PRL and accessing PVs that are not implemented Release RF-R0-2-69 S.Hoobler 17-Jul-2024 Still FEED tag R0.2.28: Add Phillip Nguyen to LLRF Maintenance Channel Access Security group. Changes to: RFApp/ctlsec/access_security_rf_lcls.acf access_security_rf_dev.acf Some archiving cleanup. Changes to common/intlk/intlk_cav.sub-arch rf/cav_base.tpl-arch cav_at_base.tpl-arch cav_pzt.tpl-arch wf/wf_cav.sub-arch lcls/sioc-sys0-rf19.sub-arch Release RF-R0-2-68 S.Hoobler 04-Jun-2024 Still FEED tag R0.2.28: Set all CMs to use lcls2_llrf tools and prc firmware 8ebe32b0: RFApp/conf/lcls/launcher_l*b-rf*.conf.substitutions Release RF-R0-2-67 S.Hoobler 04-Jun-2024 Still FEED tag R0.2.28: Add phase offset for BSA cavity phase readback; wrap to -180,180. Changes to: RFApp/Db/srf/bsaCavCommon.template src/rfSub.c Release RF-R0-2-66 S.Hoobler 22-Apr-2024 FEED tag R0.2.28: Disable DRV (loopback) waveform acquisition at IOC boot Set remaining CMs to use lcls2_llrf tools and prc firmware f9902241: RFApp/conf/lcls/launcher_l*b-rf*.conf.substitutions Release RF-R0-2-65 S.Hoobler 22-Apr-2024 FEED tag R0.2.27: New registers to listen to LCLS2 beam destinations and to read the active destination rate. Not yet tested with a timing system. Changes to: RFApp/srcArchive/common/chas/rf_chas_timing.tpl-arch Set CM32 to use lcls2_llrf tools and prc firmware f9902241: RFApp/conf/lcls/launcher_l3b-rf32.conf.substitutions Release RF-R0-2-64 S.Hoobler 22-Apr-2024 FEED tag R0.2.26: Ability to write waveform scale factor out to more records Remove obsolete BCCOEFM/P (TEMP) PVs New databases to calculate and push LCLS2 BSA slope for cavity AACT signal. It contains an optional scaling to compensate for the empirically observed discrepancy between the cavity amplitudes from LLRF BSA and RFS waveforms. To support this, new macro to define in FEED's rfCryomoduleShort*.db New: RFApp/Db/srf/bsaCavCommon.template bsaCm.substitutions Modified: RFApp/Db/srf/Makefile rfCryomoduleShortSLAC.substitutions srcArchive/common/rf/cav_base.tpl-arch iocBoot/common/common_db.cmd dev/sioc-dev-rf01/st.cmd Add simple IOC logging of HWMODE changes New EPICS database monitors HWMODE message record, then appends that string to per-cavity log file. Log file is defined in new HWMODELOG record This support runs on sioc-sys0-rf13 New: RFApp/Db/srf/hwmodeCavLog.template hwmodeLogCm.substitutions lcls/hwmodeLogSc.substitutions Modified: RFApp/Db/srf/hwmodeCavCommon.template src/rfSub.c iocBoot/lcls/sioc-sys0-rf13/st.cmd dev/sioc-dev-rf10/st.cmd Remove ACCL:SYS0:SC:RFCRYO_HEARTBEAT_DISABLE records in LCLS and Dev. This administrative control is longer used. Internal logic handles this. Delete: RFApp/Db/dev/rfcryo_disable_dev.template Modify: RFApp/Db/lcls/miscSc.template Release RF-R0-2-63 S.Hoobler 09-Apr-2024 Still FEED tag R0.2.25: Use PRC/RFS firmware and lcls_llrf tools e6a67a5a Structural/cleanup -- no intended functionality changes Changes to: RFApp/conf/lcls/*.substitutions To build on rhel7: TEMPORARY while using EPICS R3.15: Because convertRelease.pl is different in base for rhel6 and rhel7, install local copy and use that. Once RF is upgraded to EPICS R7, this can be undone: New cpuBoot/convertRelease.pl and cpuBoot/EPICS Modified configure/RULES.cpu (perhaps can be completely removed later?) Modified cpuBoot/Makefile Permanent changes: Remove configure/CONFIG_SITE.Common.rhel6-x86_64 Modify configure/CONFIG_SITE iocBoot/*/*/st.cmd: change binary architecture--in many, change to linuxRT (should have already been linuxRT, but was rhel6) Release RF-R0-2-62 S.Hoobler 02-Apr-2024 FEED tag R0.2.25: Load config_rawadc_trig register access PVs, needed for SSA characterization Don't use RF-R0-2-61 -- it is missing PVs needed for SSA characterization Release RF-R0-2-61 S.Hoobler 26-Mar-2024 FEED tag R0.2.24: RFS/PRC git commit 80b18ae8 Many changes related to cleanup, etc. No functional changes expected except addition of banyan capture arm register RFApp/srcArchive/lcls/sioc-sys0-rf18.sub-arch: Add PVs for L3B PRL diagnostic Remove global administrative input to disable RF->Cryo data. Now only disabled by internal logic, based on hardware/communication status. If hardware/communication okay but interlock permit faulted, then dissipated power reading is forced to zero and heartbeat continues to update. Also change RFCRYO_PWRDISS_OVERRIDE state name from Override to Forced to zero for clarity. Changes to RFApp/Db/srf/cryoCav.template cryoCm.template src/rfSub.c Release RF-R0-2-60 S.Hoobler 18-Mar-2024 Still FEED tag R0.2.23 RFApp/ctlsec/access_security_rf_lcls.acf: Remove OPI32 from ACR CAS host list; it is the Facilities and Operations workstation Release RF-R0-2-59 S.Hoobler 31-Jan-2024 Still FEED tag R0.2.23: PRL alarm updates: Add per-cavity PRL alarm summary for cavity CUD and LLRF displays Add per-RFS for RFS PRL phase does not match PRC and feed into rack and cavity PRLSUM Temporarily use dbpfs to set RFS tracking disabled to MINOR alarm until FEED updated New statCavPrl.template Changes to statCmPrl.substitutions statRackPrl.template iocBoot/dev/sioc-dev-rf01/st.cmd common/common_end_all_st.cmd srcArchive/common/chas/rfs_base.tpl-arch rf/cav_base.tpl-arch Add LCLS scheduled rack self-checks to LLRF ASG Changes to: iocBoot/lcls/sioc-sys0-rf11/st.cmd RFApp/Db/srf/rackCheckCron.template selCm.substitutions Change detune drift ASG to DEFAULT (inadvertently LLRF) Merged RF-R0-2-58-br onto master. Change is to use PRC/RFS firmware e5598ad2 to fix PRL zero phase transmitted from PRC to RFS. Changes to: RFApp/conf/lcls/launcher_l*b-rf*.conf.substitutions Release RF-R0-2-58-br-R0-2 S.Hoobler 31-Jan-2024 Merge in latest changes from master branch: Still FEED tag R0.2.23: PRL alarm updates: Add per-cavity PRL alarm summary for cavity CUD and LLRF displays Add per-RFS for RFS PRL phase does not match PRC and feed into rack and cavity PRLSUM Temporarily use dbpfs to set RFS tracking disabled to MINOR alarm until FEED updated New statCavPrl.template Changes to statCmPrl.substitutions statRackPrl.template iocBoot/dev/sioc-dev-rf01/st.cmd common/common_end_all_st.cmd srcArchive/common/chas/rfs_base.tpl-arch rf/cav_base.tpl-arch Add LCLS scheduled rack self-checks to LLRF ASG Changes to: iocBoot/lcls/sioc-sys0-rf11/st.cmd RFApp/Db/srf/rackCheckCron.template selCm.substitutions Change detune drift ASG to DEFAULT (inadvertently LLRF) Release RF-R0-2-58-br-R0-1 S.Hoobler 29-Jan-2024 Still FEED tag R0.2.23 Second possible fix for RFS reporting incorrect PRL zero phase: Set all CMs to use lcls2_llrf tools and prc firmware e5598ad2: RFApp/conf/lcls/launcher_l*b-rf*.conf.substitutions Release RF-R0-2-58-br-R0-0 S.Hoobler 26-Jan-2024 Still FEED tag R0.2.23 For possible fix for RFS reporting incorrect PRL zero phase: Set all CMs to use lcls2_llrf tools and prc firmware 7a0a7ee4: RFApp/conf/lcls/launcher_l*b-rf*.conf.substitutions Branch RF-R0-2-58-br Release RF-R0-2-58 S.Hoobler 09-Jan-2024 FEED tag R0.2.23: Remove xvfb wrapper for bulk rack checkout launcher commands; caused errors (no such process) in LCLS Release RF-R0-2-57 S.Hoobler 07-Nov-2023 FEED tag R0.2.23: Bug fix for rack frequency scan (could try to access non existent array elements) No longer alarm ACON at upper limit because that is standard operating mode. (Missed this when did ADES.) RFApp/ctlsec/access_security_rf_lcls.acf: Add lcls-daemon10 (to replace lcls-daemon2 in future) Release RF-R0-2-56 S.Hoobler 17-Oct-2023 Add CM-level and Linac-Section-level PRL offset resets Changes to: RFApp/Db/lcls/miscSc.template srf/miscCmCommon.template Release RF-R0-2-55 S.Hoobler 16-Oct-2023 New PRL diagnostics, similar to Sector 2 sioc-sys0-rf15: Sector 0, cpu-l0b-rf01, sioc-sys0-rf17 Sector 4, cpu-l2b-rf15, sioc-sys0-rf18 Tentative/future: Sector 7, cpu-l3b-rf35, sioc-sys0-rf19 For now, continue to use: /usr/local/lcls/package/lcls2_llrf/lcls2_llrf-prconly /usr/local/lcls/tools/FEED/firmware/prc/prc_qf2_v07.73fad841.bit.bit Release RF-R0-2-54 S.Hoobler 16-Oct-2023 Modify cryo logic changes from previous tag: If cavity RFPERMIT faulted, do not disable heartbeat, but set dissipated power sent to cryo to zero Changes to: RFApp/Db/srf/cryoCav.template cryoCm.template cryoSupportCm.substitutions src/rfSub.c srcArchive/common/cryo/cryoplc_cav.tpl-arch srcArchive/common/cryo/cryoplc_cm_common.tpl-arch Set all CMs to use lcls2_llrf tools and prc firmware f9247cac: RFApp/conf/lcls/launcher_l*b-rf*.conf.substitutions Release RF-R0-2-53 S.Hoobler 04-Oct-2023 Add auto disable of cryo heartbeats if: Cavity RFPERMIT is faulted RFS CRCERR_STAT is faulted (awaiting ICC included in that) Changes to: RFApp/Db/srf/cryoCav.template cryoCm.template cryoSupportCm.substitutions src/rfSub.c srcArchive/common/cryo/cryoplc_cav.tpl-arch Set CM32 to use lcls2_llrf tools and prc firmware 5fd1fec4: RFApp/conf/lcls/launcher_l3b-rf32.conf.substitutions Release RF-R0-2-52 S.Hoobler 04-Oct-2023 FEED tag R0.2.22: Support for 'abbreviated' rack checkout: Additional state for rack STAT Entry for launcher database RFApp/conf/common/rack/launcher_rack.conf.template: Add rack TESTABBREV entry Add new argument to rack test Add new archiving Release RF-R0-2-51 S.Hoobler 02-Oct-2023 FEED tag R0.2.21: Remove HWMODE hook into IOCWDOG interlock and move to new ADMIN interlock No longer alarm ADES at upper limit because that is standard operating mode Set all CMs to use lcls2_llrf tools and prc firmware 1170c0f0: RFApp/conf/lcls/launcher_l*b-rf**.conf.substitutions Add PRLFLT PV to PRL status summary Release RF-R0-2-50 S.Hoobler 20-Sep-2023 FEED tag R0.2.20: No EPICS changes. References new RFS firmware 1170c0f0 Set CM32 to use lcls2_llrf tools and prc firmware 1170c0f0: RFApp/conf/lcls/launcher_l3b-rf32.conf.substitutions Release RF-R0-2-49 S.Hoobler 18-Sep-2023 FEED tag R0.2.19: Add CRC error status for RFS2 on PRC (previously only RFS1) plus auto reset of link and reset counter Add per-cavity HWINITSUM PV whose status is specific to the RFS of the cavity, plus RES/PRC. This is to better support work on a single RFS Set CM32 to use lcls2_llrf tools and prc firmware d8cb8644: RFApp/conf/lcls/launcher_l3b-rf32.conf.substitutions Release RF-R0-2-48 S.Hoobler 18-Sep-2023 Set all CMs to use lcls2_llrf tools and prc firmware 9ae359dc: RFApp/conf/lcls/launcher_l*b-rf*.conf.substitutions Add missing interlock bypasses to LLRF ASG Release RF-R0-2-47 S.Hoobler 12-Sep-2023 FEED tag R0.2.18: Add PRC portion of LO interlock Set CM32 to use lcls2_llrf tools and prc firmware 9ae359dc: RFApp/conf/lcls/launcher_l3b-rf32.conf.substitutions Release RF-R0-2-46 S.Hoobler 28-Aug-2023 FEED tag R0.2.17: Add RFS-only LO interlock (PRC coming soon) Add new watchdog-type interlock to be used to intentionally prevent RF, 'ADMIN' BCOEFM/P values now calculated from CONST_PZT and not independently settable No longer periodically scan diagnostic register readback in auto-generated register databases. Was causing excess network traffic at 10 second period, which was interfering with other register reads. Set CM32 to use lcls2_llrf tools and prc firmware 80989449: RFApp/conf/lcls/launcher_l3b-rf32.conf.substitutions Release RF-R0-2-45 S.Hoobler 23-Aug-2023 FEED tag R0.2.16: Change DF_COLD from ai to longin record Fixes for initialization of SEL_ENABLE, SEL_THRESH, FB_SOURCE, DF_ENABLE Set all CMs to use lcls2_llrf tools and prc firmware 5cc386f236: RFApp/conf/lcls/launcher_l*b-r*.conf.substitutions New ASG for PDES and DMN_HEARTBEAT to prevent feedback writes to them from flooding message log Add more signals to LLRF ASG, and use macro ASG_LLRF Release RF-R0-2-44 S.Hoobler 02-Aug-2023 FEED tag R0.2.15: Latest PRC/RFS firmware 5cc386f236 New LCLS2 timing diagnostic registers Set CM32 to use lcls2_llrf tools and prc firmware 5cc386f236: RFApp/conf/lcls/launcher_l3b-rf32.conf.substitutions Release RF-R0-2-43 S.Hoobler 01-Aug-2023 FEED tag R0.2.14: Add offset for LO monitoring, to estimate level at chassis entrance. Set some standard waveform settings on boot Release RF-R0-2-42 S.Hoobler 17-Jul-2023 FEED tag R0.2.12: Fix for watchdog to set RFSTATE, RFMODE, RFREADYFORBEAM, Update ctlsec: Add alsberg, nneveu; remove jnelson Changes to: RFApp/ctlsec/access_security_rf_lcls.acf access_security_rf_dev.acf Add support for initial test implementation of scheduled detune drift compensation. Basically copy the scheduled rack checks implementation. New: RFApp/Db/srf/detuneDriftCron.template launcherDriftCm.db selDetuneDriftCav.template Modified: RFApp/Db/lcls/selLclsScCommon.template RFApp/Db/srf/selCm.substitutions selCmCommon.template RFApp/conf/lcls/rf_control_launcher_sys0-rf11.conf iocBoot/lcls/sioc-sys0-rf11/st.cmd RFApp/Db/srf/casCav.template: Add HWMODE changes WHO/WHY Remove PACTMEAN thresholds (now live in IOCs) Release RF-R0-2-41 S.Hoobler 06-Jul-2023 FEED tag R0.2.11: Add watchdog to set RFSTATE, RFMODE, RFREADYFORBEAM, and others to INVALID when waveform processing halts. Alarm for overall WF acq settings correct; include DECIMSUM in this. Move phaseAlarm databases from sioc-sys0-rf13 to individual CM IOCs Release RF-R0-2-40 S.Hoobler 05-Jul-2023 Small changes to PRL phase STD alarms: Change from MAJOR to MINOR alarm Set 3.9 MHz CM alarm threshold to .06 deg (3 x 1.3 MHz units) Add PRL PSTD alarms for Sector 2 PRL diagnostic in sioc-sys0-rf15 Release RF-R0-2-39 S.Hoobler 27-Jun-2023 FEED tag R0.2.10: Changes to chirp controls: Use dedicated drive level setting, CHIRP:ASET; no longer share with pulse and SEL raw Change cavity and forward signal level checks to be in fraction of full scale Add RMS threshold check that can be disabled by setting to 0 RFMODE readback logic: if TGEN is not off and RFMODECTRL is not Pulse, set RFMODE to Unknown FLNK from GACTMEAN to GCALC (gradient from forward in SEL) record set. Using CP on FWD:PWRMEAN resulted in extra updates Release RF-R0-2-38 S.Hoobler 23-Jun-2023 FEED tag R0.2.09: Fix chirp setup setting in-use decimation directly instead of mode-specific setting Push some standard waveform settings on IOC boot RFApp/Db/src/*: Add CA to links to reduce locksets Release RF-R0-2-37 S.Hoobler 23-Jun-2023 FEED tag R0.2.08: Add 'none' state for PRL inputs (PRL_MODE) CUD alarm updates: Add DECIMSUM for CW/pulsed decimations not 255 Add PRLJITSUM for PRL PSTD out of tolerance Add FBSTATSUM for piezo feedback detune > +/- 50 Hz and either cavity amplitude or phase out of tol (or both) Add records to automatically set PRL PSTD alarms based on PRL_MODE Release RF-R0-2-36 S.Hoobler 23-Jun-2023 FEED tag R0.2.07: Cavity phase alarms: break up locksets add dedicated records for thresholds Add Q0 record operating limits Add database to automatically adjust cavity phase alarm thresholds based on beam based feedback state (RFAL). Loaded into sioc-sys0-rf13 Release RF-R0-2-35 S.Hoobler 23-Jun-2023 FEED tag R0.2.06: Remove (unused EPICS quench interlock) LCLS2 FNAL CMTS test stand updates PRL RFS support merged onto master Some restructuring of configuration files, namely defining specific versions of firmware and tools per IOC Release on branch prl_rfs_support RF-R0-2-34-br-0-1 S.Hoobler 19-Jun-2023 Update all CMs (previously just CM32) to use new PRC/RFS firmware a33e5740 for RFS PRL tracking Release on branch prl_rfs_support RF-R0-2-34-br-0-0 S.Hoobler 31-May-2023 FEED tag R0.2.05-br-0-0: Add RFS tracking of PRL RFApp/conf/lcls: Define explicit versions of lcls2_llrf and prc/res_ctl firmware. No longer use symbolic links. CM32 using new lcls2_llrf and prc firmware: /usr/local/lcls/package/lcls2_llrf/lcls2_llrf-a33e5740 /usr/local/lcls/tools/FEED/firmware/prc/prc_fiber_qf2_v07.a33e5740.bit PRL diagnostic rack 'C', sioc-sys0-rf11: /usr/local/lcls/package/lcls2_llrf/lcls2_llrf-prconly /usr/local/lcls/tools/FEED/firmware/prc/prc_qf2_v07.73fad841.bit All others: /usr/local/lcls/package/lcls2_llrf/lcls2_llrf-6e8011d5 /usr/local/lcls/tools/FEED/firmware/prc/prc_fiber_qf2_v07.6e8011d5.bit /usr/local/lcls/tools/FEED/firmware/res_ctl/resonance_control_qf2_v07.8e92dd25.bit Release: RF-R0-2-34 S.Hoobler 31-May-2023 FEED tag R0.2.05: Autosave of SSA:SLOPE and :SCALE Fix for PZT:FBSTATSUM--minor alarm for PZT:DF_RFS not within -10 Hz to 10 Hz was not being propagated Some restructuring of launcher configuration files in RFApp/conf This is first step towards goal of using RF to define the versions of firmware and lcls2_llrf and prc/res_ctl firmware, and no longer use hard-coded symbolic link names Now the files in db/launcher* will be used instead of those in $TOOLS/FEED/config--in LCLS; LERF/B15 will come later As mentioned, more work is needed to bring LERF and B15 to date, including better handling of nonstandard chassis network names, separate files for the B15 racks, and populating the version names Move records to set phase alarm limits based on feedback to new sioc-sys0-nw13, and new databases phaseAlarm* Release: RF-R0-2-33 S.Hoobler 22-May-2023 FEED tag R0.2.04: Bug fix for rack frequency shift that left PRL and detune disabled at end of scan More QF2pre K2 QSFP sensor descriptions Comment out logic to update PACTMEAN alarms based on AL:SELECT Release: RF-R0-2-32 S.Hoobler 10-May-2023 FEED tag R0.2.02 Now turn off PRL-tracking during rack frequency shift/scan Requires additional macro passed to chirpscan seq program Update QF2pre support for fiber link power sensors: Reduce low alarm/warning thresholds Populate sensor record DESC fields describing link purpose Use 'Full' databases, which add alarms for timing/EPICS links Release: RF-R0-2-31 S.Hoobler 08-May-2023 FEED tag R0.2.01 Update versions of asyn, busy, qf2premonitor Allow non-LCLS2 network names for chassis. Replace hard-coded chassis names with macros that default to standard names Add default operating limits to cavity fudge factor for SRF systems Change ADES ASG name Change some SRF calc records autosave to no longer save input value, just input In LCLS2 timing database, push settings to registers upon reconnection with hardware RFApp/Db/srf/statCav.template: Set cavity phase alarm limits. If cavity under feedback control, set wider limits. RFApp/ctlsec: Rename READONLY_L1 To LLRF_ADES. New READONLY_L1, which does not include host for HaLO. New B15 rack H sioc-dev-rf11 Release: RF-R0-2-30 S.Hoobler 20-Jan-2023 FEED master branch, git commit 6bf63ff3, tag R0.2.00 First 2023 LERF tag Minor changes for LERF: Remove some operations-specific features for LERF: PRL tracking alarm summary Replace HWMODE with all its functionality with dummy HWMODE PV to satisfy database links New: RFApp/Db/lerf/hwmodeCavCommonDummy.template srf/statCmPrl.substitutions statRackPrl.template Changes to: RFApp/Db/lerf/Makefile srf/Makefile srf/statRack.template iocBoot/common/common_db.cmd lcls2/sioc-l1b-rf02/st.cmd Release: RF-R0-2-27 S.Hoobler 08-Dec-2022 FEED master branch, git commit 07c8ad39 Remove per-cavity PARK PV; replaced by TUNE_CONFIG Interlock count updates: Use latched instead of real-time (too fast) Fix typo in IOCWDOG rollover FB_SUM now increments even when not on change CAS updates: For PDES, remove daemon0 and srv03 Add global switch to fault LLRF->Cryo heartbeats To be used during periods when SSAs cannot be run if concerned that unplanned hardware problems might cause false cavity amplitude readings Add individual PVs for per-cavity heartbeat status Remove obsolete PARK PV Release: RF-R0-2-26 S.Hoobler 25-Nov-2022 Same FEED master branch, git commit be300520 CAS updates: For PDES, add server needed for multiknobs For ADES, add rule for heat load optimizer Release: RF-R0-2-25 S.Hoobler 17-Nov-2022 Same FEED master branch, git commit be300520 Add ASGs for specific PVs used by non-SRF-IOC applications: RF soft ioc, RFAL, Quench auto-resetter Release: RF-R0-2-24 S.Hoobler 16-Nov-2022 Same FEED master branch, git commit be300520 Add archiving of individual timed users Fix HL/EXCL AACTMEAN SUMs (should be L1B only) Restrict laci cas to specific daemon servers and IOC CPU Release: RF-R0-2-23 S.Hoobler 16-Nov-2022 Same FEED master branch, git commit be300520 Add to HWMODE MAINTENANCE DONE state READY moves from value 3 to 4 Release: RF-R0-2-22 S.Hoobler 16-Nov-2022 FEED master branch, git commit be300520 New PRL lock fault status bit Compatible with prc_fiber_qf2_v07.6e8011d5.bit Also using resonance_control_qf2_v07.8e92dd25.bit Archiving for PRL fault bits Release: RF-R0-2-21 S.Hoobler 14-Nov-2022 FEED master branch, git commit e844e67e Optional inputs to: Force RFREADYFORBEAM Fault IOCWDOG interlock Fix (set) timestamps for DF, BW, FC :WF records Remove unused rfCryomodule.db/sub Many changes related to cavity HWMODE and status for cavity summary display. Highlights: -New HWMODE Ready state -From CUDSEVR remove PARKED and add MAINTENANCE, OFFLINE, READY -Per HWMODE changes, update HWMODETUNE_STATSUM, IOCWDOG_CHK, CKPSUM -New rfCryomoduleShortSLAC.sub to populate the new optional inputs (see FEED comment above) Add to LLRF ASG: -CKP -HWMODE -Batch rack initialization New timed Channel Access Security for individual users AACTMEANSUM for all HLs and all non-HLs Archiving fixes/cleanup Release: RF-R0-2-20 S.Hoobler 02-Nov-2022 FEED master branch, git commit 677251bb2 Remove PRC shell waveforms Revive EPICS quench interlock (inactive by default) Fix rack scan 7pi/9 timestamp not set Add cavity online/maintenance/offline PV Add Parked state to TUNE_CONFIG PV Add cryo ades max Force ades to 0 when cavity offline Release: RF-R0-2-19 S.Hoobler 19-Oct-2022 FEED master branch, git commit 45a8c345 Add missing drive-side cavity amplitude fudge factor implementation (first version) For feedback gain autotune, add loop 0dB crossing record Release: RF-R0-2-18 S.Hoobler 28-Sep-2022 FEED master branch, git commit 98e08504 Set MINOR PDES/ADES alarm severities Add BCS LLRF drive fault records for cavity CUD Add ACON, PCON, ACONTODES, PCONTODES Add per-CM and per-linac-section CKPSUM records Set CKPSUM to no alarm if cavity is parked Release: RF-R0-2-17 S.Hoobler 28-Sep-2022 FEED master branch, git commit 238ab30a Fix for freq shift chirp range not getting set Add 7pi/9 to rack frequency search program iocBoot/lcls/sioc-sys0-rf15/st.cmd: For Sector 2 PRL-monitoring system, use dbpfs to clear unused QSFP signals from alarm summary and to clear alarm severities so signals are not 'red' on displays RFApp/ctlsec/access_security_rf_lcls.acf: Add Zack Taylor (ztaylor) to LLRF ASG iocBoot/common/3_9_end_st.cmd: 3.9-specific commands Add sum of ACQ_DECIM to support SRF displays Release: RF-R0-2-16 S.Hoobler 15-Sep-2022 FEED master branch, git commit e759a938 Fix processing chain of last WF update when no new data Release: RF-R0-2-15 S.Hoobler 12-Sep-2022 FEED master branch, git commit b1c8095d Rename SPARETEMP2 to AIRTEMP1 Option to convert RTD readings to DegC (instead of default K) Change gradient calculated from forward power IMPED input to link (previously hardcoded for LCLS2 SRF) Archiving for sioc-sys0-rf15 Augment functions in field maintenance LLRF ASG Release: RF-R0-2-14 S.Hoobler 30-Aug-2022 FEED master branch, git commit 45513abc New PRC I/Q waveform support for PRL and cavity diagnostic signals Rename existing PRL waveforms to PRLFWD2, PRLREV2 Add real-time calculation of PRL phase offset RF app PRL support: Add PRL_OFFSET_STAT (can't calculate offset) to statRack Archiving updates Fix typo in archiving causing cavity ADC_DIAG* not to be archived Per J Nelson request, add AACTMEANSUM for: -full SC Linac -L0B + L1B -L0B + L1B + L2B Release: RF-R0-2-13 S.Hoobler 08-Aug-2022 FEED master branch, git commit 5fc5581a Include CAV:ZRANGLE as phase offset in I/Q controller waveform calculation Add minor severity for detune > +/- 10 Hz Add minor alarm for integrator near limit New resonance firmware inverts default status for stepper limit switches. Add readback of that status. More PRL-locking EPICS integration Update status summaries per piezo alarm changes and PRL status. Update enumerated values for PRL input signal mode and add envvar for PRL system alarm status; affects startup files. Release: RF-R0-2-12 S.Hoobler 16-Jul-2022 FEED master branch, git commit 895f4962 Read RFS Digaree FIR filter gain from firmware meta data and use in quench coefficient calculation and detune quantum limit Change CONST_QUENCH_*_RBV to longin (from subArray) for archiving When exiting pulsed mode, wait for TGEN off or timeout Save/restore slew rate enable Add ADES_MAX for CM and for LCLS Linac sections Release: RF-R0-2-11 S.Hoobler 12-Jul-2022 FEED master branch, git commit c7bff154 Add 7pi/9 PVs (not yet in automated process) Add PV to gold PDES (so user does not need to manually set PREF) Add 'requested' LOWPASS_BW Add slew rate enable Add initial inputs to feedback gain calculator Save/restore DRVH of ADES_MAX_ADMIN Release: RF-R0-2-10 S.Hoobler 24-Jun-2022 FEED master branch, git commit e5aa57d7 Piezo feedback controller settings and gain calculations CW and Pulsed mode specific decimation settings Add slew rate enable Augment stepper/piezo alarm summary Add missing archived PVs Expected cavity tuning informational PV Release: RF-R0-2-09 S.Hoobler 09-Jun-2022 Back to FEED master branch, git commit 0c18a0e5 Add per-cryomodule and per-linac-section cavities' amplitude sums Release: RF-R0-2-08 S.Hoobler 31-May-2022 Still use FEED cas branch, git commit 75d32cdd Add launcher support for per-cavity PRC ADC data read Changes to: RFApp/conf/common/cav/launcher_cav.conf.substitutions cm/launcher_cm.conf.substitutions iocBoot/common/common_db.cmd dev/sioc-dev-rf01/st.cmd New: RFApp/conf/common/cav/launcher_adcread.conf.template Remove xvfb wrapper for python piezo and SSA characterization launcher commands; caused errors (no such process) in LCLS Release: RF-R0-2-07 S.Hoobler 18-May-2022 Use FEED cas branch, git commit 75d32cdd Refactored (and untangled branches) from cas_attempt Fix for glitches in average-power reading: force FEED to wait for request-read register transaction to complete before reading results Release: RF-R0-2-06 S.Hoobler 18-May-2022 Use FEED cas_attempt branch, git commit 55549549 Small fixes/improvements for amplitude-squared calculation and status (AACT_SQR, used to calculate dissipated power for cryo). Do not expect noticeable functional differences. Remove all active resonance control support; all of that now on branches FEED and RF branches: srf_arc_testing_2022 Release: RF-R0-2-05 S.Hoobler 12-May-2022 Use FEED cas_attempt branch, git commit 180a4eb1 Initial integration with Phase Reference Line tracking firmware Add QUENCHVALID status Rename feedback gain register PVs (prepend REG_) in anticipation of future high-level settings Initial Active Resonance Control integration Add 2 more gradient limit options for acceptance test: HOM heating, Coupler vacuum Release: RF-R0-2-04 S.Hoobler 12-Apr-2022 Use FEED cas_attempt branch, git commit 76b97c5c Separate decimation settings for chirp and non-chirp modes Separate waveform length calculation for non-chirp mode Stepper Hz-step scaling and calculation of steps to on resonance RFCTRL off command turns off tone mode Cavity CUD alarm for left in frequency scan mode Release: RF-R0-2-03 S.Hoobler 07-Apr-2022 Use FEED cas_attempt branch, git commit 99e574fc For scheduled automated rack checks, add parallel set of selection PVs that are used only for the scheduled checks. When it comes time to execute the checks, their values are copied to the active selection PVs. New: RFApp/Db/common/selRackSched.template Modified: RFApp/Db/common/selRack.template lcls/selLclsScCommon.template selLclsScGlobal.substitutions srf/rackCheckCron.template selCm.substitutions selCmCommon.template srcArchive/lcls/sioc-sys0-rf11_base.tpl-arch Release: RF-R0-2-02 S.Hoobler 29-Mar-2022 Use FEED cas_attempt branch, git commit 99e574fc New dedicated PV for cavity reference decay Revise piezo tuner capacitance warning limits Break out stepper status/control word bits Improvements to scheduled rack checkout: More configuration: start, iteration count, iteration period, enable/disable More status for summary display Cavity CUD DESC character array record Fix CUD rack alarm summary Add support for timed LLRF maintenance CAS; not yet active, just in place for possible future use Use IOCADMIN_MODULE_VERSION=R3.1.16-1.3.0, to pick u bug fix for race condition Release: RF-R0-2-01 S.Hoobler 18-Feb-2022 First version for LCLS2 Linac SRF operation Use FEED cas_attempt branch, git commit 0cc3d81ef Rename A/GACT TO A/GACTMEAN Calculate predicted ADES limits due to SSA Extract feedforward and external trigger databases Add Channel Access Security Add 4th administrative ADES limit, EOICDESK only Reorganize sioc-sys0-rf11, 12 to keep non-critical databases in separate IOC Move Sector 2 PRL diagnostic support out of H2 IOC, into sioc-sys0-rf15 More status alarm PVs for user displays Release: RF-R0-2-00 S.Hoobler 24-Feb-2022 Use FEED R0.1.00 (cryo interlock in RFS, PRL, LCLS timing, detune FFT, HiRes merge, etc.) This version to be used for first LCLS2 Linac verification of Cryo-LLRF interface. Note that it includes loading test software (force faults, access to other cryo PLC tags) which will be removed before SRF operation Many changes, including: Reorganize RFApp/Db: move most of 'common' to srf, add gun, add test for cryo testing temporary software Updates to Cryo interface Misc LCLS updates: CUD support, LCLS alarm summaries, ADES limits, phase offsets, SRF team placeholder PVs, etc. Fiber Kintex interface Release: RF-R0-1-29-pulsed_mode-R0-1 S.Hoobler 31-Aug-2020 Use FEED FEED R0.0.38-br-pulsed_mode-0-0 (pulsed mode feedfoward, external trigger, independent piezo DAC channels, IOC watchdog moved to RFS amplitude-squared chain, etc.) on FEED pulsed_mode branch. Final version at LERF August 2020. For LCLS production linuxRT CPU support, install CA binaries in app More support for LCLS SC Linac production systems Release: RF-R0-1-29 S.Hoobler 09-Jul-2020 Use FEED FEED R0.0.38 (resonance waveforms, FFT, gradient squared and dissipated power) Update RFS/PRC DDS PV names used in rack chirp scan RFApp/srcArchive/common/: Update archive lists per RF-R0-1-28 Move chirp rack scan support to FEED Start instantiating LCLS-II Linac IOCs: RFApp/srcArchive/lcls conf/lcls iocBoot/lcls First versions of LCLS production launcher files: RFApp/conf/lcls/launcher_l2b-rf14*, launcher_l2b-rf15* Add launcher heartbeat for CM15, these will be removed when Alarms are upated to contain these Soft support IOC, currently just hosts launcher heartbeats: iocBoot/lcls/sioc-sys0-rf11 First couple CM LLRF IOCs: iocBoot/lcls/sioc-l2b-rf14, sioc-l2b-rf15 RFApp/Db/common, cryo and interlock templates: Change bypass severity from MAJOR to MINOR RFApp/srcArchive/common/cav_base.tpl-arch: Rename DFMETHOD to DFBEST Updates for cryo-LLRF integration, tested at LERF Release: RF-R0-1-28 S.Hoobler 27-Feb-2020 Use FEED FEED R0.0.37 (firmware gradient squared, res/intlk fixes, split ioc watchdog, chirp rms) First version of rack-wide chirp scan Load cryo databases without PLC connection Update Cryo PLC tag names. Release: RF-R0-1-27 S.Hoobler 24-Feb-2020 Update Cryo PLC tag names. Update LERF IOC startup files to test Cryo. Changes to: RFApp/Db/common/cryoCav.template cryoCm.template cryoSupportCm.substitutions cryoTest.template iocBoot/lcls/sioc-l1b-rf0*/st.cmd* Release: RF-R0-1-26 S.Hoobler 21-Feb-2020 Use FEED R0.0.36 (FNAL support, 3.9 GHz, lots of other small changes) Add cryo test database and IOCs: iocBoot/lcls2/sioc-l1b-rf01, rf02 RFApp/Db/common/cryoTest.template Add dbpf to reset SW-FW comm at boot Add resonance waveform databases: RFApp/Db/common/Makefile iocBoot/dev/sioc-dev-rf01/st.cmd /lcls2/sioc-l1b-rf0*/st.cmd Fixes/additions for cryo interface while testing with Kevin, including check timestamp of gradient to verify is updating New RFApp/srcArchive/common/cryoplc_cm_common.tpl-arch, cryoplc_cav.tpl-arch Calculate/send to cryo dissipated power instead of gradient For initial LERF cryo testing, use LERF network (not llrf internal) IPs: iocBoot/lcls2/sioc-l1b-rf01,2/st.cmd Add new cryo interlock to LERF summary RFApp/srcArchive: add new chirp PVs RFApp/srcArchive/common/cav_base.tpl-arch: Update PV names for drive limit settings RFApp/srcArchive/common/feed_wf_acq_cav_sig_comp.tpl-arch: Add RANGE wf stat PV New directory to support FNAL: RFApp/srcArchive/fnal/ Release: RF-R0-1-25 S.Hoobler 29-Aug-2019 Use FEED R0.0.33 (chirp, decommission EPICS interlock, running at LERF 8/29/2019) Release: RF-R0-1-24 S.Hoobler 22-Aug-2019 Use FEED R0.0.31 (quench parameters, fault waveform trigger delay) Release: RF-R0-1-23 S.Hoobler 20-Aug-2019 RFApp/srcArchive: update archive requests with latest additions: link status, dacmode, chirp, pzt readback, qf2 utility, 8pi/9, lowpass, etc iocBoot/*/*/st.cmd: Update intlkAutoreset macros for new RFS quench interlock; remove test interlock database Use FEED R0.0.29 (RFS interlocks, fault waveforms) Release: RF-R0-1-22 S.Hoobler 26-Jul-2019 Use FEED R0.0.28, end of week at LERF Release: RF-R0-1-21 S.Hoobler 17-Jul-2019 Use FEED R0.0.26 Add QF2preUtility to st.cmd Use QF2PREMONITOR_MODULE_VERSION=R0.1.0 Updated version of RF<->Cryo interlocks based on latest specifications. Changes to: RFApp/Db/common/cryoCav.template, cryoCm.template, cryoSupportCm.sub RFApp/src/rfSub.c, rfSupport.dbd New RFApp/conf: FEED 'launcher' config generation RFApp/srcArchive: more tuning of archive configs add interlock fault counters New dummy interlock database for testing: RFApp/Db/common/intlkTest.template Release: RF-R0-1-20 Add archiving templates: RFApp/srcArchive/common and lcls2 Release: RF-R0-1-19 Comment out decay waveform analysis support until tested more: RFApp/src/Makefile RFApp/Db/common/Makefile iocBoot/lcls2/sioc-l1b-rf0*/st.cmd Use FEED R0.0.23 Release: RF-R0-1-18 Chassis-specific QF2pre alarm summaries: Use QF2PREMONITOR_MODULE_VERSION=R0.0.2 New files: RFApp/Db/common/QF2preLCLS2Cm.substitutions QF2preLCLS2Rack.substitutions Changes to: RFApp/Db/common/Makefile iocBoot/dev/sioc-dev-rf01/st.cmd lcls2/sioc-l1b-rf0*/st.cmd Release: RF-R0-1-17 Remove stepper/temperature sequence/subroutine; moved to FEED. Delete: rfResStep.st, INTres2tmp.c Use FEED R0.0.21 Release: RF-R0-1-16 Add decay waveform analysis New directory, files: newmat10 RFApp/src/wfAnalysis.dbd/cpp RFApp/Db/common/wfAnalysis* Release: RF-R0-1-15 Use FEED R0.0.20 Release: RF-R0-1-14 Use FEED R0.0.18 Release: RF-R0-1-13 Use FEED R0.0.17 Release: RF-R0-1-12 Use FEED R0.0.16 Release: RF-R0-1-11 Use FEED R0.0.15 Release: RF-R0-1-10 Use FEED R0.0.14 Release: RF-R0-1-9 Use FEED R0.0.13 RFApp/Db/common: Move most res/intlk databases to FEED iocBoot/*/*/st.cmd: Update database loads now that res/intlk databases integrated in with others Update LERF He interlock: change from just CHL to summary of CHL and He Level. New: intlkHeLerfChas.template intlkHeLerfCmCommon.template intlkLerfCm.substitutions cryoCmDummy.template: Comment out dummy He level PVs Release: RF-R0-1-8 Use FEED R0.0.12 Release: RF-R0-1-7 Use FEED R0.0.11 Res/Intlk register name updates. Changes to: RFApp/Db/common/intlkChas.sub, intlkChasCommon.template, intlkChasLerfCommon.sub, res_registers.sub, temp.template intlkCommon.template: Add MS input link specifier resCav.template: New database for detune freq valid Release: RF-R0-1-6 Use FEED R0.0.10 RFApp/Db/common: res_registers.substitutions: Update for latest res FW (CHL interlock) stepCav.template: Change nsteps drvh from 5e4 to 1e6 based on practical experience intlkCommon.template: Do not save/restore intlk byp readback Makefile, intlkChasLerfCommon.sub, intlkSoft.template: Add CHL soft interlock for LERF. (Not the cleanest implementation because regs not consistent to other interlocks. Expect future revision.) intlkCavCommon.template, intlkSoft.template, resChasInit.template, tempLims.template: Initialize settings on reconnect iocBoot/dev/sioc-dev-rf01 and lcls2/sioc-l1b-rf0*: Add intlkChasLerfCommon.db Add temporary dummy cryo interlock PVs per C Hovater request: RFApp/Db/common/cryoCmDummy.template, Makefile iocBoot/*/sioc*/st.cmd iocBoot/dev/sioc-ad10-rf01: Change max stepper per-move number of steps from 1e6 to 1e7 Release: RF-R0-1-5 iocBoot/dev/sioc-ad10-rf01: Set nsteps DRVH to 1e6 Release: RF-R0-1-4 Use R0.0.8 Add CAS and caputlog to iocBoot/lcls2/sioc-l1b-rf0* Release: RF-R0-1-3 RFApp/Db/common/intlkCavCommon.template: Fix duplicate LNK on INTLK_RESET_ALL_FO Do not process VAC_RESET until both bits set RFApp/Db/common/temp.template: Set temp sub calc inputs to MSI iocBoot/lcls2/sioc-l1b-rf0*/st.cmd: Change res IPs from 104/204 to 100/200 RFApp/src/rfResStep.st: Assign debug verbosity to PV Swap limit A/B assignments (found them to be reversed while testing at LERF) RFApp/Db/stepCav.template: Set debug verbosity PV 'on' severity to MINOR RFApp/Db/intlkCmCommon.template, intlkChas.sub: Add cryomodule-level interlock reset Release: RF-R0-1-2 Use FEED R0.0.7-br-lerf-0-2 Remove individual interlock resets and make cavity-level reset more direct to FW. Changs to: intlkCavCommon.template intlkChas.substitutions intlkCommon.template Release: RF-R0-1-1 Use FEED R0.0.7-br-lerf-0-1 Add interlocks docs: RFApp/Db/common/... Interlocks_PV_Description_R_Bachimanchi_2018-12-07.pdf/docx Add caPutLog: configure/RELEASE.local src/Makefile lcls2/sioc*/st.cmd but commented for now Move resonance support from sioc-dev-rf02 into rf01 RFApp/Db/common/ intlkCavCommon.template: Reset all: add summary reset and reorder to match screen piezoCav.template: Add readback of DAC1 setpoint many res/intlk databases: Update comments and macro descriptions Release: RF-R0-1-0 Use FEED R0.0.7-br-lerf-0-0 Add sequence program stats. Changes to: RFApp/Db/common/Makefile RFApp/src/Makefile iocBoot/common/common_start.cmd Initial interlocks support: slacRFApp/Db/common: Makefile res_registers.substitutions intlkCav.template intlkCavCommon.template intlkChas.substitutions intlkChasByp.template intlkChasCommon.template intlkChasFlt.template intlkCommon.template intlkTemp.substitutions resChasInit.template temp.template tempLims.template Rename RFApp/src/INTtmp2res.c to INTres2tmp.c Resonance cryomodule-level database (eventually migrate into FEED: slacRFApp/Db/common/resCm.sub Release: RF-R0-0-8 Update FEED to R0.0.7 for RFS tone test updates Initial piezo support: RFApp/Db/common/piezoCav.template piezoCav50.substitutions piezoCav100.substitutions iocBoot/dev/sioc-dev-rf01/st.cmd Update RFS 'tone' test db iocBoot/dev/sioc-dev-rf02/st.cmd Update resonance databases iocBoot/dev/sioc-ad10-rf01/st.cmd Add piezo database Release: RF-R0-0-7 Update FEED to R0.0.6-br-slac-resctl-0.1 Initial resonance support, including LERF iocs and new CM test sioc-ad10-rf01 Release: RF-R0-0-6 Update FEED to R0.0.6 Release: RF-R0-0-5 Update FEED to R0.0.5 iocBoot/lcls2/sioc*/st.cmd: Add AMC7823 seq programs Fix CM macro Release: RF-R0-0-4 Update FEED to R0.0.3 Release: RF-R0-0-3 Update FEED to R0.0.1 Release: RF-R0-0-2 Update QF2preMonitor to R0.0.1 Release: R0-0-2 iocBoot/lcls2/sioc-l1b-rf01,02: add QF2preMonitor Release: R0-0-1 Add/modify high-level pieces of resonance/interlock. Integrate QF2preMonitor. Release: R0-0-0 Version in use at LERF as of 9/20/2018. Supports RFS chassis only.