# RELEASE - Location of external support modules
#
# IF YOU MAKE ANY CHANGES to this file you must subsequently
# do a "gnumake rebuild" in this application's top level
# directory.
#
# The build process does not check dependencies against files
# that are outside this application, thus you should do a
# "gnumake rebuild" in the top level directory after EPICS_BASE
# or any other external module pointed to below is rebuilt.
#
# Host- or target-specific settings can be given in files named
#  RELEASE.$(EPICS_HOST_ARCH).Common
#  RELEASE.Common.$(T_A)
#  RELEASE.$(EPICS_HOST_ARCH).$(T_A)
#
# This file should ONLY define paths to other support modules,
# or include statements that pull in similar RELEASE files.
# Build settings that are NOT module paths should appear in a
# CONFIG_SITE file.
#
# If you don't want to install into $(TOP) then
# define INSTALL_LOCATION_APP here
#INSTALL_LOCATION_APP=<fullpathname>

# EPICS Templates
TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top

# =============================================================
# All needed variables come in via the following include:
# =============================================================
include $(TOP)/RELEASE_SITE

# =============================================================
# Define location of the modules tree
# =============================================================
EPICS_MODULES=$(MODULES_SITE_TOP)


# ==============================================================
# Define the cvs module version of EPICS BASE that you will use
# =============================================================
BASE_MODULE_VERSION=$(EPICS_BASE_VER)

# =============================================================
# Define the version of modules needed by
# IOC apps or other Support apps
# =============================================================
SEQ_MODULE_VERSION=seq-R2-1-3-lcls1
RESTORE_MODULE_VERSION=restore-R2-2-1
#AUTOSAVE_MODULE_VERSION=autosave-R4-7-lcls5
#CAPUTLOG_MODULE_VERSION=caPutLog-R3-3-0
MISCUTILS_MODULE_VERSION=miscUtils-R2-2-2
EVENT_MODULE_VERSION=event-R3-2-2-br_generaltime-1-3
IOCADMIN_MODULE_VERSION=iocAdmin-R3-1-6-RC1-lcls1
IPAC_MODULE_VERSION=ipac-R2-8-lcls8
IP330_MODULE_VERSION=ip330-R2-2-2
IP231_MODULE_VERSION=ip231-R2-2-2
XY2440_MODULE_VERSION=xy2440-R1-0-lcls5
XY2445_MODULE_VERSION=xy2445-R1-0-lcls5
EDT_CL_MODULE_VERSION=EDT_CL-R2-2-2

# ============================================================
#  Module Location
# ============================================================
#======================================================
SNCSEQ=$(EPICS_MODULES)/seq/$(SEQ_MODULE_VERSION)
RESTORE=$(EPICS_MODULES)/restore/$(RESTORE_MODULE_VERSION)
#AUTOSAVE=$(EPICS_MODULES)/autosave/$(AUTOSAVE_MODULE_VERSION)
#CAPUTLOG=$(EPICS_MODULES)/caPutLog/$(CAPUTLOG_MODULE_VERSION)
MISCUTILS=$(EPICS_MODULES)/miscUtils/$(MISCUTILS_MODULE_VERSION)
EVENT=$(EPICS_MODULES)/event/$(EVENT_MODULE_VERSION)
IOCADMIN=$(EPICS_MODULES)/iocAdmin/$(IOCADMIN_MODULE_VERSION)
IPAC=$(EPICS_MODULES)/ipac/$(IPAC_MODULE_VERSION)
IP330=$(EPICS_MODULES)/ip330/$(IP330_MODULE_VERSION)
IP231=$(EPICS_MODULES)/ip231/$(IP231_MODULE_VERSION)
XY2440=$(EPICS_MODULES)/xy2440/$(XY2440_MODULE_VERSION)
XY2445=$(EPICS_MODULES)/xy2445/$(XY2445_MODULE_VERSION)
EDT_CL=$(EPICS_MODULES)/EDT_CL/$(EDT_CL_MODULE_VERSION)

# =================================================================
# Define EPICS_BASE
# EPICS_BASE usually appears last so other apps can override stuff:
# =================================================================
EPICS_BASE=$(BASE_SITE_TOP)/$(BASE_MODULE_VERSION)

# Set RULES here if you want to take build rules from somewhere
# other than EPICS_BASE:
#RULES=/path/to/epics/support/module/rules/x-y

