******************************************* **************** Logic Add **************** ******************************************* Device 'SONYA_UND1_1_FAULT_THRESHOLD' added to the logic database. Device 'SONYA_BSY0_1_TEMPSUM_THRESHOLD' added to the logic database. ====================================== Adding SONYA UND FAULT TEST Added truth table "SONYA UND FAULT TEST" (807) Ignored when YAG01 Is In Input 0: SONYA_UND1_1_FAULT_THRESHOLD Input 1: SONYA_BSY0_1_TEMPSUM_THRESHOLD Adding state "FAULT" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "UND OK" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "BSY OK" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "BOTH OK" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None ====================================== ******************************************** **************** Device Add **************** ******************************************** The following devices will be added: 10 4 5 SONYA UND1 1 FAULT THRESHOLD IS_EXCEEDED IS_OK 0 Immediate low threshold SONYA:BSY0:1:TEMPSUM SONYA BSY0 1 TEMPSUM THRESHOLD IS_FAULTED IS_OK 1 Adding new Link Node Channel 10.4.5 to database Adding new PV Device Type "SONYA" to database Check if already in ZFAULT: ZDEVICE=SONYA_UND1_1_FAULT and ZNAME=THRESHOLD Not found, so adding PV Fault"SONYA_UND1_1_FAULT" THRESHOLD Added Channel 10 4 5 -- SONYA_UND1_1_FAULT THRESHOLD Adding new External PV "SONYA:BSY0:1:TEMPSUM" to database Check if already in ZFAULT: ZDEVICE=SONYA_BSY0_1_TEMPSUM and ZNAME=THRESHOLD Not found, so adding PV Fault"SONYA_BSY0_1_TEMPSUM" THRESHOLD Added External PV SONYA:BSY0:1:TEMPSUM -- SONYA_BSY0_1_TEMPSUM THRESHOLD ====================================== *********************************************** **************** Device Rename **************** *********************************************** [INFO] DeviceArea 'B913' and PvArea 'UND1' did not match for device with original name 'BFW_UND1_1210_OUT'. Now both are set to 'UND1' for new device 'BFW_UND1_1211_OUT'. Changes report ------------------ Renamed devices and their affected logic: BFW_UND1_1210_OUT:BFW_UND1_1211_OUT BFW Inserted Count BFW 1210 Position BFW_UND1_1210_IN:BFW_UND1_1211_IN BFW 1210 Position ====================================== ***************************************************** **************** Device/Logic Delete **************** ***************************************************** [INFO] Macro with id:'784' associated with logic device 'PROF_BSY0_45_OUT_LIMIT_POSITION' does not exist. [INFO] Macro with id:'785' associated with logic device 'PROF_BSY0_45_OUT_LIMIT_POSITION' does not exist. Changes report ------------------ Deleted devices and their deleted associated logic: PROF_BSY0_45_OUT_LIMIT PROF_BSY0_45_IN_LIMIT Profile Monitor BSY0 45 Position Profile Monitor BSY0 45 Position When D2 or TDUND Not In ====================================== Changes report ------------------ Deleted logic and logic that lost an ignore condition: BCS LION LTU1 404 Threshold ======================================