
MpsConfiguration-R2-78

Logic 2018-03-21-a
-------------
* Set OTR30 truth tables inactive:
  OTR30 LTU1 449 Position
  OTR30 LTU1 449 Position When TDUND Not In

NOTE: Do not use MpsConfiguration-R2-77


MpsConfiguration-R2-77

MpsConfiguration-R2-76

Config 2018-03-02-a
-------------
* Remove MFX_LENS_1_SAFE

Logic 2018-03-02-a
-------------
* Remove MFX Beam Focusing Interlock (Beryllium Lens)

MpsConfiguration-R2-75

Config 2017-12-13-a
-------------
* Change all PIC/BLM loss and test inputs to be non-autorecoverable
  (latching). Most already had this setting, but a small
  number had been misconfigured. 
* Delete all rate-based PIC/BLM loss inputs. These were
  intended for rate-recovery, whose prospects are currently
  unknown and these input state changes flood the log.

Logic 2017-12-13-a
-------------
* XLEAP MIRXL - MIRR LTU1 829 Position:
  Make 3 mm position allowed (change rate from 0 -> 120 Hz)

MpsConfiguration-R2-74

Config 2017-10-17-a
-------------
* Add A-line secondary target IN/OUT status

Logic 2017-10-17-a
-------------
* Set 'Main Manifold Gauge: LI30 Station 9' Inactive
* Set 'XCS Gate Valve Summary - XRT Periscope Line' Inactive
* Rename FEE camera 852 and 913 logic to be more accurate


MpsConfiguration-R2-73

Config 2017-07-24-a
-------------
* New input XCS:PBT:VGC_OUT_SUM

Logic 2017-07-24-a
-------------
* New truth table
  XCS Gate Valve Summary - XRT Persicope Line

MpsConfiguration-R2-72

Config 2017-06-19-a
-------------
* Swap XLEAP mirror 3mm and 5mm position
  inputs (they are currently reversed).


Logic 2017-06-19-a
-------------
* Swap XLEAP mirror 3mm and 5mm position
  inputs (they are currently reversed).


MpsConfiguration-R2-71

Logic 2017-06-08-b
-------------
* Rename M3H to XRT-M2 in logic truth 
  table names and state names
* XRT-M2 (aka M3H) no longer has valid
  in position; deactivated related logic
* FEE camera 852 and 913 FEE PLC interlock
  logic now does photon transmission check;
  updated truth table names and state names
  accordingly
* Updated truth table names for A-line kickers
  now that kickers have been re-named as part
  of BSY Reconfiguration. (LN inputs still
  need rename eventually.)

Config 2017-06-08-a
-------------
* New inputs for XLEAP wiggler gap
  and insertable devices


Logic 2017-06-08-a
-------------
* New logic for XLEAP wiggler gap
  and insertable devices

Config 2017-05-24-a
-------------
* Remove obsolete inputs:
    THZR_DMP1_350_OUT_LIMIT
    THZR_DMP1_350_IN_LIMIT

Logic 2017-05-24-a
-------------
* Remove obsolete truth tables:
    THz Radiator Beryllium Foil
    FEE Camera 1561 Position

MpsConfiguration-R2-70

Config 2017-05-22-a
-------------
* Add inputs for XLEAP LTU Beam Loss Fiber

Logic 2017-05-22-a
-------------
* Add logic for XLEAP LTU Beam Loss Fiber

Logic 2017-05-18-h
-------------
* Add D2 as ignore device for 
  PIC Trigger Missed (LN31)

Logic 2017-05-18-g
-------------
* Add YAG01, YAG02, TD11 as ignore devices
  for Linac PIC truth tables

Logic 2017-05-18-f
-------------
* Add TD11 as ignore device for Linac 
  truth tables downstream of TD11

Logic 2017-05-18-e
-------------
* Reinstate TDUND as an ignore
  device for some end-of-LTU BLMs.
  (It was removed in 2017-05-18-a.)
  See changes.log for more details.

Logic 2017-05-18-d
-------------
* Add missing ignore devices for
  PIC Trigger Missed (LN25)
  BCS PIC RAW Charge Threshold DMP 997
  BCS PIC RAW Charge Threshold DMP 998

Logic 2017-05-18-c
-------------
* Add missing D2 ignore device
  to more LTU truth tables.

Logic 2017-05-18-b
-------------
* More ignore logic cleanup. Add D2
  as ignore device for injector OTRs
  when 'TDUND Not In'

Logic 2017-05-18-a
-------------
* Fix: Remove TDUND as ignore condition
  for many LTU truth tables. Unclear why
  it was in the list originally.

Logic 2017-05-17-a
-------------
* Add D2 Stopper Summary In as ignore condition
  for many LTU, UND, DMP truth tables.
* Add TD11 as ignore condition for 
  VVMG LTU1 505 Position  

MpsConfiguration-R2-69

Logic 2017-05-16-a
-------------
* Allow 120 Hz beam when D2 is IN

MpsConfiguration-R2-68

Config 2017-05-13-a
-------------
* Remove OTR22 inputs:
    OTRS_LI25_342_OUT_LMTSW
    OTRS_LI25_342_IN_LMTSW
* For 2017 FEE reconfiguration, many changes.
    See changes.log and supporting files for details.


Logic 2017-05-13-a
-------------
* Remove OTR22 truth tables:
    OTR22 Position
    OTR22 Position When TDUND Not In
* For 2017 FEE reconfiguration, many changes.
    See changes.log and supporting files for details.


MpsConfiguration-R2-67

Config 2017-05-10-b
-------------
* New A-line valve VVPG_BSYA_340_OPEN_LIMSW
* Remove long-obsolete devices:
   DEV_52SL1
   DEV_50B1
   DEV_50PR3OUT
   HVPS_BSY0_54_POWER  
* Remove inputs not needed for BSY Reconfiguration:
   TRGT_BSYA_960_OUT_LIMSW
   TRGT_BSYA_960_IN_LIMSW
   TRGT_BSYA_960_FLOW_SW
   TRGT_BSYA_960_KLIXON
   COLL_BSYH_479_FLOW_SW
   COLL_BSYH_487_FLOW_SW
   COLL_BSYH_495_FLOW_SW
   COLL_BSYH_520_FLOW_SW

Logic 2017-05-10-b
-------------
* Logic for new A-line valve:
  VVPG BSYA 340 Position
* Remove inactive obsolete logic
  DEV 50PR3 Position
* Per K. Jobe, remove logic associated
  with A-line copper target:
    A-Line Secondary Target Position
    A-Line Secondary Target Flow Switch
    A-Line Secondary Target Klixon
    A-Line Secondary Target Is Out

Logic 2017-05-10-a
-------------
* Remove references to obsolete FEE Spoiler SP0
  and Stoppers ST1/ST2:
  - Remove truth tables:
      Spoiler SP0 DMP1 765 Position
      Stopper: ST1/ST2 Position
  - Remove ignore logic:
      Spoiler SP0 Is In
      ST1/ST2 Are In


MpsConfiguration-R2-66

Config 2017-04-28-a
-------------
* Replace individual PCAPM flow switches
  with single switch for PCAPM1-4
* Changed PIC channel assignments for
  PCAPM1-4 PICs
* Remove unused constantly cycling PIC inputs
  for new BSYH PICs. Note will need
  to be re-added to implement rate recovery!

Logic 2017-04-28-a
-------------
* Remove:
  PIC Raw Charge Thresholds: BSYH 520 PCBSYH/A
  Flowswitch: COLL BSYH 520 (PCBSYH/A)
  Flowswitch: COLL BSYH 479 (PCAPM1)
  Flowswitch: COLL BSYH 495 (PCAPM3)
  Flowswitch: COLL BSYH 487 (PCAPM2)
* Add:
  Flowswitch: COLL BSYH 479, 487, 495, 503  (PCAPM1-4)

MpsConfiguration-R2-65

Config 2017-04-17-a
-------------
Many changes to support 2017 downtime BSY Reconfiguration of LCLS common-line,
including some A-line related changes. See changes.log and the other supporting
documents for details. 


Logic 2017-04-17-a
-------------
Many changes to support 2017 downtime BSY Reconfiguration of LCLS common-line,
including some A-line related changes. More details can be found in changes.log
and the other supporting documents. 

* Change 'A-Line B1/B2 Is Not On AND A-Line Kicker Is Not Enabled' 
    to 'A-Line Kicker Is Not Enabled'
* Change 'BSY GLAST Target' to 'A-Line Secondary Target'
    (target now in A-line; no longer in common-line)
* Add new truth tables:
    Flowswitch: COLL BSYH 479 (PCAPM1)
    Flowswitch: COLL BSYH 487 (PCAPM2)
    Flowswitch: COLL BSYH 495 (PCAPM3)
    Flowswitch: COLL BSYH 503 (PCAPM4)
    Flowswitch: COLL BSYH 520 (PCBSYH/A)
    PIC Raw Charge Thresholds: BSYH 479 (PCAPM1)
    PIC Raw Charge Thresholds: BSYH 487 (PCAPM2)
    PIC Raw Charge Thresholds: BSYH 495 (PCAPM3)
    PIC Raw Charge Thresholds: BSYH 503 (PCAPM4)
    PIC Raw Charge Thresholds: BSYH 520 PCBSYH/A
    PIC Raw Charge Thresholds: BSYH 762 PC90
    PIC Raw Charge Thresholds: BSYH 836 PC119
    Temperature RTD Summary: BSY Common Line
    VVFS CLTH 101 Position
    VVPG BSYH 470 Position
    VVPG BSYH 541 Position
    VVPG BSYH 837 Position
    VVPG CLTH 178 Position
    VVPG CLTH 375 Position
* Remove obsolete truth tables
    PIC Raw Charge Thresholds: BSY0 16
    PIC Raw Charge Thresholds: BSY0 33
    PIC Raw Charge Thresholds: BSY0 45
    PIC Raw Charge Thresholds: BSY0 59
    PIC Raw Charge Thresholds: BSY0 78A
    PIC Raw Charge Thresholds: BSY0 78B
    DPS Temperature LI30
    Fast Shutter FV2A LI30 Position
    Fast Shutter FV2 LI30 Position
    VVPG BSY0 IV2 Position
    VVPG BSY0 IV3 Position
    VVPG BSY0 IV4 Position
    Temperature RTD Summary: BSY Common Line Before D2
    Temperature RTD Summary: BSY Common Line Past D2
    Ion Chamber Gas Flowswitch BSY A
    Ion Chamber Gas Flowswitch BSY B
    Ion Chamber Gas Flowswitch BSY C
    Flowswitch: BSY PC320
    Flowswitch: BSY PC90
    Flowswitch: COLL BSY0 16 (50PC20)
    Flowswitch: COLL BSY0 33 (50PC30)
    Flowswitch: COLL BSY0 45 (50PC-45)
    Flowswitch: COLL BSY0 59 (PC0119)
    Flowswitch: COLL BSY0 65 (PC0145)
    Flowswitch: COLL BSY0 67 (PC0155)
    Flowswitch: COLL BSY0 69 (PC0165)
    Flowswitch: COLL BSY0 71 (PC0175)
    Flowswitch: COLL BSY0 73 (PC0185)
    Flowswitch: COLL BSY0 75 (PC0195)


MpsConfiguration-R2-64

Logic 2016-11-09-a
-------------
* Remove 'MFX Gate Valves Not All Open - PLC Summary Status' 
* Rename 'Toroid Comparator Dogleg (IM02 vs IM03)'
  to 'Toroid Comparator Dogleg 1 (IM02 vs IM03)'


MpsConfiguration-R2-63

Logic 2016-11-03-a
-------------
* Modify titles of toroid comparator truth table 
  names for clarity

Logic 2016-10-20-a
-------------
* Add ignore condition 'BSY GLAST Target Is Out'
* Modify 'BSY GLAST Target Klixon' and 'BSY GLAST Target Flow Switch'
  to use above ignore condition instead of using the target
  position in the actual truth table

Config 2016-10-19-a
-------------
* Delete obsolete device inputs:
  Dump B4C
  BSY PR45
  BSY PR55


Logic 2016-10-19-a
-------------
* Delete obsolete and inactive logic:
    Profile Monitor BSY0 55

MpsConfiguration-R2-62

Logic 2016-10-18-a
-------------
* Remove truth tables:
  Profile Monitor BSY0 45 Position When D2 or TDUND Not In
  Profile Monitor BSY0 45 Position

Logic 2016-10-17-a
-------------
* New MFX interlocks
* Add new analog link node inputs (not yet used in logic)

Config 2016-10-17-a
-------------
* Add new MFX inputs. 
  See changes.log and *diff*.html files for details

MpsConfiguration-R2-61

Logic 2016-08-25-a
-------------
* Build against database 2016-08-25-a in order to test analog
  link node inputs. No logic changes.


Config 2016-08-25-a
-------------
* Add new Analog Link Node 44 and first set of inputs
  See changes.log for details

MpsConfiguration-R2-60

Logic 2016-05-10-a
-------------
* Again, minor change to state names for these truth tables:
  FEE Spectrometer Crystal - Beam Energy Too Low When Crystal Not Out
  FEE Spectrometer Crystal - Pulse Energy Too High When Crystal Not Out 
  Gas Detector Problem When FEE Spectrometer Crystal Not Out

Config 2016-05-02-a
-------------
* Remove unused and obsolete device
   TIUKEYSW aka TIU:IN20:1:KEY_SWITCH_STATE


Logic 2016-05-02-a
-------------
* Remove unused and obsolete device
   TIUKEYSW aka TIU:IN20:1:KEY_SWITCH_STATE
* Rename Spoiler: SP0 DMP1 765 Position to Spoiler SP0 DMP1 765 Position



MpsConfiguration-R2-59

Logic 2016-04-29-a
-------------
* Minor change to state names for these truth tables:
  FEE Spectrometer Crystal - Beam Energy Too Low When Crystal Not Out
  FEE Spectrometer Crystal - Pulse Energy Too High When Crystal Not Out 
  Gas Detector Problem When FEE Spectrometer Crystal Not Out
MpsConfiguration-R2-58

Config 2016-04-26-a
-------------
* Delete obsolete dechirper devices
   DCHP_LTU1_545_WDOG_SUM
   DCHP_LTU1_545_BPM_INTOL

* New devices for FEE spectrometer crystal protection 
  XTAL_FEE1_441_PULSEENERGY, LN10, Card 4, Ch 3
  GDET_FEE1_1_CAL_OK, LN10 Card 4, Ch 4

Logic 2016-04-26-a
-------------
* New truth tables for FEE spectrometer crystal protection
  FEE Spectrometer Crystal - Pulse Energy Too High When Crystal Not Out
  Gas Detector Problem When FEE Spectrometer Crystal Not Out
Logic 2016-04-24-a
-------------
* No logic changes. Modify Makfile to use scripts/version1-0-6

Config 2016-04-24-a
-------------
* No config changes. Modify Makfile.conf to use scripts/version1-0-6

MpsConfiguration-R2-57
Logic 2016-03-01-a
-------------
* "FEE Solid Attenuators - Gas Pressure Interlock": allow SATTs 3 and 4 
  to be IN

Logic 2016-02-26-a
-------------
* Remove obsolete inputs and associated logic - should not affect algorithm

Logic 2016-02-25-a
-------------
* Remove obsolete inputs and associated logic - should not affect algorithm

Logic 2016-02-24-a
-------------
* Remove Dechirper BPM interlocks
* Remove dangling unused database objects - should not affect algorithm

MpsConfiguration-R2-56
Logic 2016-02-12-a
-------------
* Update LTU Horizontal Dechirper Gap truth table now that
  we have 2 independent gap switches

MpsConfiguration-R2-55
Logic 2016-01-22-b
-------------
Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out

Logic 2016-01-22-a - BASED ON 2015-12-17-a
-------------
Rename some inputs to match their PV names. See changes.log
for details.

Config 2016-01-22-a
-------------
* Rename some input names to match their PV names. 
  See changes.log for details.


MpsConfiguration-R2-54
Config 2015-12-07-b
-------------
* Removed unused PV attributes from database.
  For some External PV objects, fill in missing Device Details
  fields. See changes.log for details.

Config 2015-12-07-a
-------------
* Removed unused devicedetails and fault objects from database:

Devicedetails:
THZR LTU1 741 IN_LIMSW
MIRR FEE1 1560 OUT_LIMIT1 (two of these)
MIRR FEE1 1560 OUT_LIMIT2 (two of these)
XTAL FEE1 441 OUT_LIMSW

Faults:
'SPARE'
'02B'
'02A'
'Valve is open'
'A-line Kicker Pulser1': PULSER1_ON, PULSER1_OFF, PULSER1_TRIG_ENB, PULSER1_TRIG_LOCK
'A-line Kicker Pulser2': PULSER2_ON, PULSER2_OFF, PULSER2_TRIG_ENB, PULSER2_TRIG_LOCK
'SL10 CLOSED'
'ST22 OUT'
'THZ-2 Foil Out Switch'
'THZ-2 Foil In Switch'
'FEE spectrometer crystal OUT'

Config 2015-12-01-a
-------------
* Removed duplicate device instances:
  MIRR_FEE1_1560_OUT_LIMIT1 (2 duplicates)
  MIRR_FEE1_1560_OUT_LIMIT2 (2 duplicates)
  XTAL_FEE1_441_OUT_LIMSW (1 duplicate)

Config 2015-11-30-a
-------------
* Remove duplicate PvArea LTU1 from database. 
  Changed all devices that used the deleted instance
  to use the other instance. See changes.log for list
  of affected devices.
* Remove duplicate PvDeviceType BFW from database. 
  Changed all devices that used the deleted instance
  to use the other instance. See changes.log for list
  of affected devices.

Config 2015-11-23-a
-------------
* Remove unused devices:
  FLOOD_SW_OK
  TARGET_EPV_FLOSW_2_OK
  AMO_HFP_MPA_02ASPARE
  MTLM_LOGIC_OK
  STOPPER_2_IN_OUT
  STOPPER_1_IN_OUT
  AMO_HFP_MPA_02BSPARE
  RAD_SHLD_FLOSW_9_OK

* Remove unused LN channels
  LN 40 Card 1 Channel 10
  LN 40 Card 1 Channel 11
  LN 40 Card 2 Channel 9
  LN 40 Card 2 Channel 10
  LN 40 Card 2 Channel 11
  LN 40 Card 3 Channel 11
  LN 42 Card 2 Channel 4
  LN 42 Card 2 Channel 6
  LN 42 Card 3 Channel 8

Logic 2015-12-17-b
-------------
Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out

Logic 2015-12-17-a - BASED ON 2015-11-09-a
-------------
* Remove unused duplicate truth table
* Fix XRT S5 state names (Moving and Broken were swapped)
* Update LTU Vertical Dechirper Gap truth table now that
  we have 2 independent gap switches


MpsConfiguration-R2-53
Config 2015-11-09-a
-------------
* Add MEC_DV4_VGC_01_OPN_DI
* Misc LN 39-41 rename and delete
  for photon-side inputs. Details
  in directory.

Logic 2015-11-09-b
-------------
Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out

Logic 2015-11-09-a - BASED ON 2015-10-10-a
-------------
* Remove photon logic:
          HXX:HXM:VGC:01 Gate Valve Position
          HXX:HXM:VGC:02 Gate Valve Position
          HXX:HXM:VGC:03 Gate Valve Position
          XRT HXRAY MXT Isolation Valve HXX-MXT-VGC-01
          NEH AMO Focusing Optics Entrance Gate Valve KBO-VGC-01
          NEH AMO Focusing Optics Exit Gate Valve KBO-VGC-02
          NEH AMO LAMP Gate Valve VGC 30 Position
          NEH AMO LAMP Gate Valve VGC 30 Is In Beam
          NEH AMO LAMP Gate Valve VGC 30 Is Out of Beam
* Add photon logic:
          NEH AMO Valves Ok for Beam - Summary From PLC
          MEC BXL VGC 01 Gate Valve Position
          XRT HXRAY MXT Gate Valve HXX:MXT:VGC:01
          XRT HXRAY MXT Gate Valve HXX:MXT:VGC:02
          XRT HXRAY MXT Gate Valve HXX:MXT:VGC:03
          XRT HXRAY MXT Gate Valve HXX:MXT:VGC:05
* Add ignore devices to  TDUND Position
* Remove B4C Position
* Remove Temperature RTD Summary: North Arc

MpsConfiguration-R2-52
Logic 2015-10-10-b
-------------
Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out

Logic 2015-10-10-a
-------------
Remove LTU Dechirper - Undulators Must Be Out If Dechirper Not Out

Logic 2015-10-09-a - BASED ON 2015-09-08-a
-------------
Add MEC DV4 VCG 01 Gate Valve Position
Use database version 2015-10-09-a

Config 2015-10-09-a
-------------
* Add MEC_DV4_VGC_01_OPN_DI

MpsConfiguration-R2-51
Logic 2015-09-08-z: NON-LINEAR LOGIC
-------------
This is a version to be used ONLY for LTU Dechirper commissioning.
It is based on 2015-09-04-a with these changes:
* Add commissioning Dechirper logic:
  LTU Dechirper Commissioning - BPM 550 Watchdog
  LTU Dechirper Commissioning - BPM 550 X/Y Position
  LTU Dechirper Commissioning - TDUND Must Be In

Logic 2015-09-08-a
-------------
* Add production Dechirper logic:
  LTU Dechirper - Undulators Must Be Out If Dechirper In
  LTU Dechirper - 10 Hz Raw Limit if Jaws Not Out
  LTU Dechirper - BPM 550 Watchdog
  LTU Dechirper - BPM 550 X/Y Position
  LTU Dechirper - Horizontal Gap Too Small
  LTU Dechirper - Vertical Gap Too Small
  Ignore device: LTU Dechirper Is Out

Logic 2015-09-04-a
-------------
* Add truth table "MFX Gate Valves Not All Open - PLC Summary Status"

Logic 2015-09-03-a
-------------
* Add truth table "VVFV IN20 785 Position"
* Add Dechirper BLF truth tables:
    "BLM Heartbeat: Dechirper LTU1 BLF545"  
    "BLM Pedestal Thresholds: Dechirper LTU1 BLF545"
    "BLM Raw Charge Thresholds: Dechirper LTU1 BLF545"
* Set "XPP CS-PAD 1 Detector Damage Fault" inactive

Config 2015-09-03-a
-------------
* Add Dechirper inputs:
    BLM:LTU1:BLF545:LOSS_60_L
    BLM:LTU1:BLF545:LOSS_60_H
    BLM:LTU1:BLF545:TEST_L   
    BLM:LTU1:BLF545:TEST_H   
    BLM:LTU1:BLF545:TEST_1_L
    BLM:LTU1:BLF545:TEST_1_H
    BLM:LTU1:BLF545:PED_L    
    BLM:LTU1:BLF545:PED_H
* Add new IN20 fast valve:
    VVFV:LI20:785:OPEN_LMTSW
* Add new MFX hutch vacuum valve PLC summary:
    MFX_MPS_PLC_VAC_OK

MpsConfiguration-R2-50
Logic 2015-07-13-b
-------------
* Explicity add inputs for is-code logic (those that were missing)
  to support MPS GUI improvements
* Update logic for CXI:SC3:VGC:01. See changelog for details.

MpsConfiguration-R2-49
Logic 2015-07-13-a
-------------
* Add new truth table for CXI gate valve: 
    "CXI:SC3:VGC:01 Gate Valve Position"
* Modify BC1 toroid comparator state names to reflect new threshold

Config 2015-07-13-a
-------------
* Add Dechirper inputs:
    DCHP_LTU1_545_BPM_INTOL_THRESHOLD
    DCHP_LTU1_545_GAP_LIMSW_NEGZ_POSITION
    DCHP_LTU1_545_GAP_LIMSW_POSZ_POSITION
    DCHP_LTU1_545_OUT_LIMSW_NEGY_POSITION
    DCHP_LTU1_545_OUT_LIMSW_POSY_POSITION
    DCHP_LTU1_545_WDOG_SUM_STATE
    DCHP_LTU1_555_GAP_LIMSW_NEGZ_POSITION
    DCHP_LTU1_555_GAP_LIMSW_POSZ_POSITION
    DCHP_LTU1_555_OUT_LIMSW_NEGX_POSITION
    DCHP_LTU1_555_OUT_LIMSW_POSX_POSITION
    USEG_UND1_1_ALL_OUT_STATE
* Add new CXI gate valve open limit switch:
    CXI_SC3_VGC_01_OPN_DI_POSITION

MpsConfiguration-R2-48
Logic 2015-05-18-a
-------------
* Add new truth table FEE Solid Attenuators - Gas Pressure Interlock
* Modify ignore device lists for: 
    HXR - Beam Energy Too Low With M1S Out
    FEE Spectrometer Crystal - Beam Energy Too Low When Crystal Not Out
Config 2015-05-18-a
-------------
* Add FEE Gas attenuator pressure threshold interlock
  to LN38: VMPS:FEE1:E202:NOGAS

MpsConfiguration-R2-47
Logic 2015-05-04-a
-------------
* Add new devices: LN42 trigger; LTU dechirper BLF
* Add truth table PIC Trigger Missed (LN42)
* Remove duplicate truth table Mirror BL21 Position 
* Per CATER request, add MAD names to OTR/YAG truth tables.
  Then, to be consistent, add unit numbers to other OTR/YAG
  truth tables

Config 2015-05-01-a
-------------
* Add LTU Dechirper Beam Loss Fiber channel
  to LN30: BLM:LTU1:BLF545

Config 2015-04-22-a
-------------
* Add PIC LN 42 trigger input status, fault:
  PICM_BSYA_2061_NO_TRIG_MISSED

MpsConfiguration-R2-46 
Logic 2015-03-04-a
-------------
* Add TD11 Position truth table to fault moving/broken state

Logic 2015-03-02-c
-------------
* Remove BX01/BX02 and BXG from ignore device lists
  for truth tables also ignored by TD11
* Remove duplicate Flowswitch: COLL BSYA 1015 (PC10)
* Rename BSY GLAST Target to BSY GLAST Target Position
* Remove duplicate Linac slow and fast valves

Logic 2015-03-02-b
-------------
* Rename TIU, flow switch, IMPS Heartbeat, Pockels Cell
  truth tables for clarity and consistency

Logic 2015-03-02-a
-------------
* Remove duplicate truth tables:
  TIU: DPS Temperature
  TIU: Fast Shutter 2 Position: LI30
  TIU: Fast Shutter 2A Position: LI30
  YG BL241 Position
  YG BL351 Position
* Change TIU:MCC Emergency Radiation Stopper
  to be always evaluated (never ignored)
* Add D2 as ignore device for HXRSS logic

MpsConfiguration-R2-45
Logic 2015-01-07-b
-------------
* NOTE: this version is a pseudo-branch, containing 
  just 2 changes from 2015-01-07-a. 
  Last-minute release to support LCLS MD activities:
    - Ignore 30-9 slow valve if TD11 is IN     

MpsConfiguration-R2-44
Logic 2015-01-07-a
-------------
* Add TDUND flow switch logic
* Reorganize Profile Monitor BSY0 45 logic to 
  take advantage of ignore devices instead of 
  using stopper positions as inputs to logic.
  Set 'Profile Monitor BSY0 45' logic to Not Active
  Add 2 new truth tables: 'Profile Monitor BSY0 45 Position'
  and 'Profile Monitor BSY0 45 Position When D2 or TDUND Not In'
* Fix typo in truth table name. Change 'FEE Spectrometer Crystal - 
  Beam Energy Too Low With Crystal Out' to 'FEE Spectrometer 
  Crystal - Beam Energy Too Low When Crystal Not Out'

MpsConfiguration-R2-43
Logic 2014-12-05-a
-------------
* Add logic to protect
  FEE spectrometer crystal
  from low energy beam

Config 2014-12-05-a
-------------
* Add fault
  XTAL_FEE1_441_ENERGY
* Rename
  XTAL_FEE1_442_OUT_LIMSW
  to
  XTAL_FEE1_441_OUT_LIMSW

MpsConfiguration-R2-42
Config 2014-11-25-a
-------------
* Add faults
  KICK:LTU0:320:ABORTWIN
  KICK:LTU0:320:STANDBYWIN

MpsConfiguration-R2-41
Logic 2014-10-24-a
------------
* Add truth tables
  XPP SB2 VGC 02 Gate Valve Position
  XPP SB2 VGC 03 Gate Valve Position

Config 2014-10-24-a
------------
* Add inputs
  XPP_SB2_VGC_02_OPN_DI_POSITION
  XPP_SB2_VGC_03_OPN_DI_POSITION

MpsConfiguration-R2-40
Logic 2014-10-16-a
------------
* BCS PIC RAW Charge Threshold DMP 997/998: 
  add D2 to ignore list
* OTR21/OTR22 Position:
  add TD11 To ignore list
* OTR30/OTR33 Position:
  add TD11 and D2 to ignore list
Config 2014-10-16-a
------------
* Add FEE Spectrometer Crystal OUT limit switch

MpsConfiguration-R2-39
Logic 2014-10-10-a
------------
* Set 'Stopper: ST1/ST2 Position' to only
be ignored if D2 IN

MpsConfiguration-R2-38
Logic 2014-10-01-a
------------
* Add HXR Beam Energy with M1S Out truth table

MpsConfiguration-R2-37
Logic 2014-09-24-a
------------
* Cleanup of photon logic ignore device lists
  See changes.log for more information

MpsConfiguration-R2-36
Logic 2014-09-23-a
------------
* Add new ignore device SP0 spoiler, add it as
  ignore device to appropriate truth tables

MpsConfiguration-R2-35
Modify for cram and static build
Added to CVS modules as MpsConfiguration
**Note new tag names use capital M, i.e. 
MpsConfiguration, not mpsConfiguration**

mpsConfiguration-R2-34
Logic 2014-07-02-a
------------
* Modify D2 logic to rate-limit beam to 10 Hz 
  (from 120) when D2 is IN
* Update PIC HVPS input names to be consistent
* Add truth tables for missing PIC HVPS inputs: 
  LI20, LI24, BSY
* Fix ignore devices for LI24 BLM/PIC watchdog

Config 2014-07-02-a
------------
* Add missing BSY PIC HVPS inputs: 2-6
* Update input and state names for all PIC HVPS to
  be consistent

mpsConfiguration-R2-33
Logic 2014-06-09-a
------------
* Added logic for DMP SP0 Spoiler Position

Config 2014-06-09-a
------------
* Added IN and OUT limit switches for DMP SP0 spoiler

mpsConfiguration-R2-32
Logic 2014-05-30-a
------------
* Remove photon mirror M3H from lists of ignore devices

mpsConfiguration-R2-31
Logic 2014-05-13-a
------------
* Remove CXI Detector Damage truth tables
* Set B4C Protection of ST1/ST2 inactive
* Update B4C Position
* BSY RTD truth table name cleanup
* Fix incorrect LHS mitigation rate assignment for 
  some non-LHS-related truth tables

mpsConfiguration-R2-30
Logic 2014-03-31-a
------------
* Update CXI valve logic per A. Wallace

mpsConfiguration-R2-29
Logic 2014-03-12-a
------------
* Update CXI Configurations 2 and 7 per A. Wallace

mpsConfiguration-R2-28
Logic 2014-02-28-a
------------
* Changed names and removed channels for CXI.
* Updated CXI configuration summary logic
* Added D2 as Ignore Device for many CXI truth tables

Config 2014-02-28-a
------------
* Changed names and removed devices for CXI

mpsConfiguration-R2-27
Logic 2014-02-26-a
------------
* Update SXRSS Mode logic; remove temporary mode truth tables that
  were created for commissioniNG

mpsConfiguration-R2-26
Logic 2014-02-21-a
------------
* Cleaned up FEE1 M1S Mirror Beam Energy Upper Limit truth table

mpsConfiguration-R2-25
Logic 2014-02-06-a
------------
* No logic changes
* Use database 2014-01-06-a to pick up databaseCommon/version1-0-4,
  which adds channel access security to MPS bypasses

Config 2014-02-06-a
------------
* Use databaseCommon/version1-0-4 to add channel acces
  security to MPS bypasses


mpsConfiguration-R2-24
Logic 2014-01-06-a
------------
* 50PC30, 50PC45, PC0119 - no longer ignore when 
  A-Line B1/B2 Is Not On AND A-Line Kicker Is Not Enabled
  (never should have been the case)
* SXRSS: Add individual truth tables for each insertable device;
  Modify mode logic to take advantage of these new tables

mpsConfiguration-R2-23
Logic 2013-12-17-a
------------
* SXRSS Mode: Seeded Mode: Allow M3 to be either IN or OUT
  (previously required to be IN)

mpsConfiguration-R2-22
Logic 2013-12-02-a
------------
* Modifications to HXR Beam Energy Lower Limit for future use and
  set inactive for now
* Add FEE1 M1S Mirror State to check for inconsistencies
* Add S5B to ignore list for HF4 LAM VGC 01 Gate Valve Position
* Add D2  to ignore list for B4C Protection of ST1/ST2  

mpsConfiguration-R2-21
Logic 2013-11-11-a
------------
* Enable production SXRSS Mode State; 
  disable temporary SXRSS Mode State - Chicane, Slit, and M3 Active

mpsConfiguration-R2-20
Logic 2013-10-28-a
------------
* A-line IV40: Ignore when 'SL10 Closed' or 'B1/B2 Off and
  A-line Kicker not enabled'

mpsConfiguration-R2-19
Config 2013-10-15-a
------------
* Remove AMO_HFP_VGC_02A, AMO_HFP_VGC_02B
* Add AMO_LMP_VGC_30_OPN_DI, AMO_LMP_VGC_30_CLS_DI

Logic 2013-10-15-a
------------
* Changes for next AMO run:
  -Remove NEH AMO Diagnostics Chamber Gate Valve
  -Remove ANEH AMO HFP Beam Stop
  -Remove NEH AMO End Station Ready
  -Remove NEH AMO High Field Physics Chamber Gate Valve Summary
  -Add NEH AMO LAMP VGC 30 Position truth tables

mpsConfiguration-R2-18
Config 2013-10-10-a
------------
* Remove OTRS LTU1 743 OUT/IN LIMITs (PSI profile monitor)
* Add    YAGS LTU1 743 OUT/IN LIMITs (PSI profile monitor)

Logic 2013-10-10-a
------------
* Modify PSI Profile Monitor truth table to use YAGS:LTU1:743 inputs
  instead of OTRS:LTU1:743 inputs; changed truth table name to use 
  YAG instead of OTR

mpsConfiguration-R2-17
Config 2013-10-04-a
------------
* Add OTRS LTU1 743 OUT/IN LIMITs (PSI profile monitor)

Logic 2013-10-04-a
------------
* Add logic for SXRSS with Chicane, Slit, and M3 Active (for M3 test)
* Remove previous M3 standalone logic; not needed
* Add LTU PSI profile monitor logic

mpsConfiguration-R2-16
Logic 2013-09-24-a
------------
* Add logic for BSY GLAST Target Flow Switch
* Add logic for SXRSS M3 (temporary for test of mirror only)
* Modify logic for BSY collimator 65, 67, 69, 71, 73, 75) flow switches
  so that they are not masked by "A-Line B1/B2 Is Not On AND A-Line Kicker Is Not Enabled"
* Revive Inactive BSY GLAST Target Klixon with new logic

Config 2013-09-24-a
------------
* Add BSY GLAST Target Flow Switch

mpsConfiguration-R2-15
Logic 2013-08-28-a
------------
* Modify Ignore Device A-Line B1/B2 Is Not ON and A-Line Kicker Is Not Enabled:
  - Replace power supply ON status with 2 new OFF status inputs from PPS
* Per R. Iverson, modify BSY PR45 logic to require D2 or TDUND to be IN if PR45 IN
* Per R. Iverson, M. Stanek remove SXR lower energy limit

Config 2013-08-28-a
------------
* Add A-line B1/B2 OFF status Chains A and B from PPS

mpsConfiguration-R2-14
Logic 2013-08-02-a
------------
* Add SXRSS logic and devices; remove obsolete e+ devices
* Active SXRSS logic assumes only slit and chicane are installed
* Inactive SXRSS logic added for potential future use:
  - All SXRSS devices installed
  - slit, chicane, M2, M3 installed

Config 2013-08-02-a
------------
* Add SXRSS devices

mpsConfiguration-R2-13
Logic 2013-07-19-a
------------
* Per CATER 109696, add fault if A-line IV26 NOT_OUT
* Add missing state names for B4C protection

mpsConfiguration-R2-12
Logic 2013-07-08-a
------------
* Per Cater 109199, add logic that requires B4C in ST0 to be OUT

* Per J. Turner (see algorithm/2013-07-08-a/changes.log) require
  FEE M1S Mirror to be OUT OR Beam Energy is low enough

Database 2013-07-08-a
---------------
* To support M1S mirror protection (above), add 2 OUT limit switch inputs
  and 'energy OK' input (this repurposes an unused LN11 input 'BC1_CID')

mpsConfiguration-R2-11
Logic 2013-06-15-a
------------
* Per Cater#108919
	Regarding mitigating potential B4C damage while running low energy.  
	In attendance were Rad Physics, Paul Miller, John Arthur, Roger, 
	Jim Turner, and M. Stanek.

	The interim solution for allowing low energy running without a BAS 2 mJ 
	limit was an agreement that we would not allow photons on the ST0 B4C piece 
	at all.  Sayed Rokni accepted that as an interim measure, we would use MPS 
	to ensure this condition.  

 	What is need required:
	If ST1/ST2 = Not OUT,  Zero rate fault the Gun.
 	This fault should have an 'ignore condition' when TDUND is in, 
	D2 is in, TD11 is in, BX01/02 is NOT ON, YAG BL211 is IN, BXG is ON.
	
	Existing B4C ST1_ST2 shall stay in place.



mpsConfiguration-R2-10
Logic 2013-06-13-a
------------
* Change D2 Stopper State Strings. Bit 0 and 1 were reversed. Change does not affect logic only readback status string

mpsConfiguration-R2-09
Database 2013-06-03-a
------------
* Add GLAST Limit Switches 

Logic 2013-06-03-a
------------
* Add Logic for GLAST Target Moving
* Add Logic for VAC Valve BSYA 4005 (IV40)


mpsConfiguration-R2-08
Database 2013-05-27-a
* Add new STPR 60 System (D2, ST60,ST61, BTM60,BTM PPS SOLN CNTL). Signals coming from PPS

Logic 2013-05-27-a
------------
* Add New STPR 60 System C-code logic, all must be IN or OUT. 
	Change Ignore logic status to use new D2 IN bits and
	De-Activate D2 Logic from BCS
* Add TDUND IN to Prof BSY 45 logic per R.Iverson
* De-Activate A-Line LGPS/COR magnets from A-Line logic per R. Iverson and J. Nelson
	- lgps ab01 1010, 1090, 1950, 2050, 2750, 2850, and xcor 2890, 3212, 
	and ycor 2911, 3313.
* De-Activate A-Line GLAST Klixon per R. Iverson and J. Nelson


mpsConfiguration-R2-07
Logic    2012-12-10-a
---------------------
* Changed HXRSS Mode logic per Heinz-Dieter Nuhn:
	- HXRSS bend lints changed from 12.7<E < 14.2 to 10<E <15
	- Changed Seeded Mode definition to require Crystal to be IN
	- Changed Phase Shifter Mode to all HXRSS Bend to be at ANY state


mpsConfiguration-R2-06
Database 2012-11-12-a
Logic    2012-11-12-a
---------------------
* Add THZR:LTU1:741:IN_LMTSW, OUT_LMSW limit switches for new THZ-2 
* removed a spare vacuum valve on LN 31, card 1, ch 9 so that we could add
  these limit switches

mpsConfiguration-R2-05:
Database 2012-10-26-a
Logic    2012-10-26-a
---------------------
* Add new logic to set lower limit of Beam Energy for SXR and HXR per R. Iverson.
	Lower Beam E limit is 3.3GeV

mpsConfiguration-R2-04:
Database 2012-10-15-a
Logic    2012-10-15-a
---------------------
* Add new logic to set lower limit of Beam Energy for Undulator per R. Iverson.
	Lower Beam E limit is 2.3GeV


mpsConfiguration-R2-03:
Logic    2012-09-30-a
---------------------
* Modify logic for SXR:GMD:VGC_01, add S2 Stopper to ignore logic and renamed 
	logic table to include NEH at the beginning like the rest of NEH tables.
* Included upstream beam destinations to BCS PIC/LION inputs per HVS,
	and changed the logic name to BCS PIC/LION Raw Charge Threshold



mpsConfiguration-R2-2:
Database 2012-09-26-a
Logic    2012-09-26-a
---------------------
* Adds new SXR:GMD:VGC_01 support
* this skips database and logic 2012-09-25-a in order to remove the PICMs that
were not needed

mpsConfiguration-R2-1: DO NOT USE
Database 2012-09-25-a
Logic    2012-09-25-a
---------------------
* Adds new PICM:DMP1:380.381 and SXR:GMD:VGC_01 support

mpsConfiguration-R2-00:
Database 2012-09-18-a
Logic    2012-09-18-a
---------------------
* end of downtime 2012 release. Tag for production. Adds new VVPG:DMP1:355
	 and XPP:SH3 support

mpsConfiguration-R1-115:
added file database/2012-08-08-a/AdditionalCode.h, otherwise same as 114 
Database 2012-08-08-a
Logic    2012-08-08-a
---------------------
upgrade to epics-R3-14-12, mps-R1-0-1-branch-R1-2

mpsConfiguration-R1-114:
Database 2012-08-08-a
Logic    2012-08-08-a
---------------------
upgrade to epics-R3-14-12, mps-R1-0-1-branch-R1-2

mpsConfiguration-R1-113:
Logic   2012-06-29-a
------------
* Fixed bug in SL10 IS IN state, state # is 15 (ie 1111) not 4.
* Fixed a bug in HXRSS Mode Logic (is code=True) became false in Logic 2012-06-25-a, 
	Logic 2012-06-25-a should NO Longer be used!!!



mpsConfiguration-R1-112:
Logic   2012-06-25-a
------------
* De-activate some BSYA logic  per R. Iverson and C. hast
* Added PPS STOPPER Inputs
* changes existing PPS logic to use new inputs	
* De-Activated A-Line Profile Monitor Summary logic per R. Iverson 

Config 2012-06-25-a
------------
* Added BSYA PPS Inputs
* removed some BSYA inputs that are now being replaced by the PPS inputs
* removed A-Line Kicker auto recovery for trigger inputs

Logic   2012-06-05-a
------------
* De-activate some BSY PICS in Logic per R. Iverson
	PIC Unit numbers:
	LCLS  SLC 
	65	145	Trips often if PM1 is on-bypassed			
	67	155				
	69	165				
	71	175				
	73	185				
	75	195				
	76	205	

Config 2012-06-05-a
------------
* Clean up names of A-Line devices, desc was too long
	
DESC, "SLIT_BSYA_2010_SL10_CLS_LIMIT" to  blahÉLIM instead of LIMIT 
DESC, "STPR_BSYA_2275_ST22_OUT_LIMIT" to  blahÉLIM

* Remove recovery for A-Line Kicker Rate Inputs so that it doesn't fill up Logs when kicker is at rates less than 120Hz.


mpsConfiguration-R1-110:

Logic   2012-05-21-a
------------
* Changes for CXI and MEC
* Logic for A-Line, removed unused inputs

Config 2012-05-05-a
------------ 
* Set BSYA PICM's to NOT have auto recovery
   


mpsConfiguration-R1-109:

Logic   2012-05-05-a
------------
* de-Activate logic for
	 VVPG:LI21:1:POSITION Per Ted Martinez 
* Logic for A-Line
* Logic MEC
Config 2012-05-05-a
------------ 
* Add BSYA XCOR Power Supply input


mpsConfiguration-R1-108:
Config  2012-04-30-a baed on 2012-03-20-a but fixed PICM channel errors
------------
* Added Link Node 43 for A-Line KICKER (BYKICK TYPE)
* Added inputs for A-Line


mpsConfiguration-R1-107:
Config 2012-04-22-a
------------
* Added Link Node 42 for A-Line PICs along with A-LINE PICMs.

mpsConfiguration-R1-106:
Config 2012-03-20-a
	* Added new CXI Valve
	* Fix Input typos in LNW_BSO and STPR_BSY_88
Logic 2012-03-20-a
	* same logic as 2012-01-06-a but includes the config typo fix
Logic 2012-03-20-b
	* based on 2012-03-20-a and includes new CXI valve logic

mpsConfiguration-R1-105:
Config 2012-01-06-a
	* Added HXRSS HOZ and YAW Home Status
	* Updated for Puleo Status

mpsConfiguration-R1-104:
Added Config: 2012-01-03-a for VVFS:DMP1:107
Added Logic: 2012-01-03-a MEC logic and VVFS:DMP1:107

mpsConfiguration-R1-103:
Added Config: 2011-11-29-a which fixes A-Line Kicker ON/OFF read back strings
Added Logic: 2011-11-29-a and 2011-11-15-b for MEC logic

mpsConfiguration-R1-102:
Add Logic:  2011-11-15-a  and 2011-11-15-b for new CXI and MEC logic, "b" includes logic for HXRSS full installation.
Add Config: 2011-11-15-a for A-Link Kicker Pulser Status, inputs not added to logic input list

mpsConfiguration-R1-101:
Add Logic:  2011-11-07-a  and 2011-11-07-b for HXRSS
Add Config: 2011-11-07-a for MEC and CXI
Logic corrects "BXG is On" 0 bit input error which was set to BEND_IN20_751_OFF, corrected it to be BEND_IN20_231_OFF.

mpsConfiguration-R1-100:
Add Logic:  2011-10-31-a  and 2011-10-31-b for HXRSS
Add Config: 2011-10-31-a for HXRSS

mpsConfiguration-R1-99:
Add Logic:  2011-09-19-a for MEX and XPP

mpsConfiguration-R1-98:
Add Config:  2011-09-12-a per MEC

mpsConfiguration-R1-97:
-- Add Config: 2011-08-26-a to set Detector Pad Faults autorecovery to False 

mpsConfiguration-R1-96:
-- Add Logic: 2011-08-10-a Fixed error in M3H Ignore logic definitions. 

mpsConfiguration-R1-95:
-- Logic: 2011-08-09-a
---- Changes for Mark Arndt in MEC, XPP, and CXI

mpsConfiguration-R1-94:
-- Logic: 2011-08-01-a
---- Added updated BYKICK Readback Logic to ignore when D2 is IN
-- Config: 2011-08-01-a
----Changes for Mark Arndt in Config
	

mpsConfiguration-R1-93:
-- Logic: 2011-07-12-a
-- Config: 2011-07-12-a
-- Changes for CXI per Mark Arndt

mpsConfiguration-R1-92:
-- Logic: 2011-07-05-a
-- Config: 2011-07-05-a
-- Additional ignore devices for UM6; DG2; XCS devices; add new devices for upcoming runs

mpsConfiguration-R1-91:
-- Logic: 2011-06-28-a
-- Config: 2011-06-15-a
-- New XCS logic; remove some obsolete NEH and XCS logic

mpsConfiguration-R1-90:
-- Logic: 2011-06-17-a
-- Config: 2011-06-15-a
-- Fix bug introduced in mpsConfiguration-R1-88 

mpsConfiguration-R1-89: **Bug in this version; DO NOT USE**
-- Logic: 2011-06-16-a
-- Config: 2011-06-15-a
-- Fix bug introduced in mpsConfiguration-R1-88

mpsConfiguration-R1-88: **Bug in this version; DO NOT USE**
-- Logic: 2011-06-15-a
-- Config: 2011-06-15-a
-- Add XPP truth table and ignore condition.
   Add XCS inputs.
   Cleanup: remove obsolete XRT input and CXI logic
            remove obsolete FEE stopper inputs

mpsConfiguration-R1-87:

-Logic 2011-05-31-a
--Add 2 new XPP logic tables

-Logic 2011-05-26-a
-- Add new CXI Logic
-- Add new MEC Logic
-- Add D2 Logic and D2 Ignore Device Logic
-- Change Valve Logic to include D2 and TD11 Ignore Logic per Iverson

-Databse 2011-05-26-a
--Remove Extra B921 ST1_ST2 Inputs that never were used. Real status comes from B950.

-Logic 2011-05-25-a
   *IMPORTANT IMPORTANT IMPORTANT 
	NOTE: reverted back to logic 2010-09-28-a because 
	everything in logic sqlite fails from then till 
	now was malformed. Recreated all logic changes 
	so that logic 2011-02-26-a and 2011-05-25-a 
	are equivalent, but 2011-05-25-a has db issues 
	resolve and extra S5 Position Logic. Added 
	AutoIncroment to sqlite Mpslogic.mpl tables.


mpsConfiguration-R1-86:
-config: 2011-05-11-a
--Add support new inputs and  for CXI
--Add RTD summary past BSY D2 inputs 

mpsConfiguration-R1-85:
-config: 2011-05-04-a
--Add support new inputs and  for CXI
--Add D2 inputs 

mpsConfiguration-R1-84:
-Should not be used

mpsConfiguration-R1-83:
-Logic:  2011-02-26-a
-config: 2011-02-26-a
--Add support for soft input for CXI CS-PAD-Damage Fault and reverted logic back for CXI Configuration 4 Summary.

 
mpsConfiguration-R1-82:
-Logic: 2011-02-25-a
-- Per Mark Arndt and CXI request, temporarily changed CXI MPS CFG 4 CONFID logic from "CXI Configuration 4 Summary" to "CXI CS-PAD-Damage Fault". Changes should be backed out when CXI changes can support a proper protection design. Logic for "CXI Configuration 4 Summary" should revert back to logic 2011-2-2-a when needed.

mpsConfiguration-R1-81:
 -Deactivate logic for BSY Prof PR1_2, 50PR3, and PR2 per Iverson. Added BSY PIC HV per Sony. 

mpsConfiguration-R1-80:
 -Add logic and database "2011-01-08-a" to change PV name of input and sway states. 

mpsConfiguration-R1-79:
 -Add logic 2010-12-06-a (for CXI Config 1-7 and PLC_OK Status logic)

mpsConfiguration-R1-78:
 -Add database 2010-12-01-a for CXI 
 -Add logic 2010-12-01-a for CXI
 - Removed extra HXX:MXT:VGC_01:OPN_DI Position input and removed from logic 

mpsConfiguration-R1-77:
 -Add database 2010-11-29-a for CXI (built from database 2010-09-28-a)
 -Add logic 2010-11-29-a for CXI

mpsConfiguration-R1-76:
 -Add database 2010-11-22-b for CXI (built from database 2010-09-28-a)

mpsConfiguration-R1-75:
 -Add database 2010-11-22-a for CXI

mpsConfiguration-R1-74:
 - Add database 2010-09-28-a (Changed name of TRHZ:DMP1:310 to THZR:DMP1:350)
 - Add logic 2010-09-28-a (same as above)

mpsConfiguration-R1-73:
 - Add database 2010-09-24 (added VVMG-DMP1-743)
 - Add logic 2010-09-24 (added VVMG-DMP1-743, remove BSY Fast Gauges and BSYA B11)

mpsConfiguration-R1-72:
 - Update which CONFIG and LOGIC to build in top level Makefile (should have been 
   included in R1-71)

mpsConfiguration-R1-71:
 - New database and logic 2010-08-30-a. Add NEH AMO End Station Ready; Set NEH2 HXRAY StrongBack 1 Isolation Valve to inactive" 
 - Builds database 2010-08-17a and 2010-08-30-a
 - Builds logic 2010-08-17a and 2010-08-30a

mpsConfiguration-R1-70:
 - New databaseand logic  2010-08-17-a. (added BYKICK watchdog)

mpsConfiguration-R1-69:
 - New database 2010-08-11-a, logic 2010-08-11-a (Add PICM:BSYA:1701A,1701B) 

mpsConfiguration-R1-68:
 - New database 2010-08-10-a 

mpsConfiguration-R1-67:
 - New logic 2010-08-09-a (BSYA devices ignore BYKICK)

mpsConfiguration-R1-66:
- Fixed double BSYA devices
- Added logic for BSYA Prof and BSYA PIC ignore on B1/B2
	
mpsConfiguration-R1-65:
- Added BSYA devices

mpsConfiguration-R1-64:
- Made BSY PIC inputs latching
- Added mpslogic_create_pic_patch.py application

mpsConfiguration-R1-63:
- Corrects CE11 flowswitch input and logic

mpsConfiguration-R1-62:
- Added PIC inputs to LN 25
- Added PIC logic for LN 11, 16, and 22

mpsConfiguration-R1-61:
- Added NO_TRIG inputs to LN 11, 16, and 22

mpsConfiguration-R1-60:
- Removed PIC autorecover

mpsConfiguration-R1-59:
- Removed PICs from LN 23, 25, and 26

mpsConfiguration-R1-58:
 - Corrected Link Node types

mpsConfiguration-R1-57:
 - Added PIC inputs

mpsConfiguration-R1-56:
 - Updated photon section inputs

mpsConfiguration-R1-55:
 - New configurations, 2010-03-23-a, 2010-03-29-a
 - New logic 2010-03-30-a

mpsConfiguration-R1-54:
 - New configuration, 2010-03-16-a

mpsConfiguration-R1-53:
 - Alg common uses mps-R1-0-0

mpsConfiguration-R1-52:
 - New unlatch PVs
 - New algorithm wrapper to use latched values
 - New EDM displays
 - Better Makefiles reduce number of products built
 - Replaced deprecated Python code (os.popen)
 - Split up mpsconfig Python module.  Easier to modify, understand.

mpsConfiguration-R1-51:
 - Updated channel mapping
 - Updated BASII stopper logic to use new channel mapping

mpsConfiguration-R1-50:
 - TIMING_STABLE logic added
 - TIU inputs added to logic

mpsConfiguration-R1-49:
 - TIMING_STABLE input added
 - BPM BYKIK input (27/1/14) is now a latching fault

mpsConfiguration-R1-48:
 - Rate request logic for BYKIK and Pockels Cell
 - Rate requests include burst and single shot modes for BYKIK and Pockels cell

mpsConfiguration-R1-47:
 - Added 1553 logic
 - Added rate request logic and inputs

mpsConfiguration-R1-46:
 - Updated AMO logic
 - Updated MPS configuration

mpsConfiguration-R1-45:
 - Added AMO logic

mpsConfiguration-R1-44:
 - Added AMO inputs and stopper S1 in status

mpsConfiguration-R1-43:
 - Added AMO inputs and stopper S1 in status

mpsConfiguration-R1-42:
 - Added "Phase Two Alpha" FEE and NEH inputs and logic

mpsConfiguration-R1-41:
 - Added PIC/BLM watchdog faults

mpsConfiguration-R1-40:
 - Removed ignore cases from ST1/ST2 B4C protection logic

mpsConfiguration-R1-39:
 - Added B4C/ST1ST2 logic

mpsConfiguration-R1-38:
 - Added FEE logic, moved ST1 ST2 inputs to different card

mpsConfiguration-R1-37:
 - Moved LN 38/4 to 38/3 to match reality

mpsConfiguration-R1-36:
 - Added FEE phase 1 inputs

mpsConfiguration-R1-35:
 - Remapped LTU PIC inputs
 - Removed masking of LTU PICS on TDUND

mpsConfiguration-R1-34:
 - PICM 732 latches
 - Update to EPICS fault latching

mpsConfiguration-R1-33:
 - Better fault numbering

mpsConfiguration-R1-32:
 - Added LN28/29 PICs

mpsConfiguration-R1-31:
 - Bypass recover internal input and logic

mpsConfiguration-R1-30:
 - Moved BFW 1010 In from 33/1/13 to 32/1/12

mpsConfiguration-R1-29:
 - Renamed BFW inputs

mpsConfiguration-R1-28:
 - Removed EPICS BFW inputs

mpsConfiguration-R1-27:
 - Added PIC inputs

mpsConfiguration-R1-26:
 - Moved BFW 1810 and 2610 to non-card-1-chan-13 inputs

mpsConfiguration-R1-25:
 - Pockels Cell AND Gate TT no longer affects LHS
 - Uses hardwired BFW In status

mpsConfiguration-R1-24:
 - Added LN34 no trig input

mpsConfiguration-R1-23:
 - Added LN34 PICs

mpsConfiguration-R1-22:
 - Added BTM summary fault PV

mpsConfiguration-R1-21:
 - Removed many PV faults

mpsConfiguration-R1-20:
 - Added BFW In PV faults

mpsConfiguration-R1-19:
 - Corrected magnet PV names

mpsConfiguration-R1-18:
 - Added magnet PV faults

mpsConfiguration-R1-17:
 - Added OTR 621 logic

mpsConfiguration-R1-16:
 - Added OTR/TDUND logic

mpsConfiguration-R1-15:
 - Added BLM:LTU1:980 to algorithm 2009-04-03-a

mpsConfiguration-R1-14:
 - New algorithms with much more BLM logic

mpsConfiguration-R1-13:
 - Moved VVMG:LTU1:505 from LN29-01-13 to LN29-01-03

mpsConfiguration-R1-12:
 - New algorithm and configuration to handle laser AND gate

mpsConfiguration-R1-11:
 - Added many BLM and BLM HVPS inputs
 - Added new shutter inputs
 - Better documentation export
 - New algorithm wrapper
 - New MPS Logic

mpsConfiguration-R1-10:
 - Added BLM channels for link nodes 30, 32, 33, 35, and 37.
 - Changed LN36's BLM names to match the new channels.
 - Shifted LN10's card 2 channels up by one channel number.
 - Updated database/current to 2009-02-26-a

mpsConfiguration-R1-9:
 - New algorithm export format.  Initializes rates to 120 Hz.

mpsConfiguration-R1-8:
 - New algorithm export format

mpsConfiguration-R1-7:
 - New handwritten algorithm 2009-02-20-c

mpsConfiguration-R1-6:
 - Ignore logic inverted

mpsConfiguration-R1-5:
 - Algorithm fixes laser heater logic

mpsConfiguration-R1-4:
 - Added new DB with four new PV inputs (BP01-BP04)
 - New MPS logic created to use these inputs
 - New SNL output.

mpsConfiguration-R1-3:
 - Removed BFW 110 EPICS channel from config DB.

mpsConfiguration-R1-2:
 - Algorithm 2009-02-18-a modified to remove more EPICS dependencies.

mpsConfiguration-R1-1:
 - Algorithm 2009-02-18-a added.  Removes dependency on EPICSs status.

mpsConfiguration-R1-0:
 - Initial version

