The following devices will be added: 28 2 1 DCHP LTU1 555 OUT_LIMSW_NEGX POSITION IS_NOT_OUT IS_OUT 1 Dechirper -X jaw not out 28 2 2 DCHP LTU1 555 OUT_LIMSW_POSX POSITION IS_NOT_OUT IS_OUT 1 Dechirper +X jaw not out 28 2 3 DCHP LTU1 545 OUT_LIMSW_NEGY POSITION IS_NOT_OUT IS_OUT 1 Dechirper -Y jaw not out 28 2 4 DCHP LTU1 545 OUT_LIMSW_POSY POSITION IS_NOT_OUT IS_OUT 1 Dechirper +Y jaw not out 28 2 5 DCHP LTU1 555 GAP_LIMSW_NEGZ POSITION IS_NOT_OK IS_OK 1 Dechirper X gap too small 28 2 6 DCHP LTU1 555 GAP_LIMSW_POSZ POSITION IS_NOT_OK IS_OK 1 Dechirper X gap too small 28 2 7 DCHP LTU1 545 GAP_LIMSW_NEGZ POSITION IS_NOT_OK IS_OK 1 Dechirper Y gap too small 28 2 8 DCHP LTU1 545 GAP_LIMSW_POSZ POSITION IS_NOT_OK IS_OK 1 Dechirper Y gap too small 10 4 2 USEG UND1 1 ALL_OUT STATE NOT_ALL_OUT ALL_OUT 1 Undulators not all out 10 4 3 DCHP LTU1 545 WDOG_SUM STATE IS_NOT_OK IS_OK 1 Dechirper watchdog fault 10 4 4 DCHP LTU1 545 BPM_INTOL THRESHOLD IS_NOT_OK IS_OK 0 Dechirper BPM out of tol Adding new Link Node Card 28.2 to database Adding new Link Node Channel 28.2.1 to database Adding new PV Device Type "DCHP" to database Check if already in ZFAULT: ZDEVICE=DCHP_LTU1_555_OUT_LIMSW_NEGX and ZNAME=POSITION Not found, so adding PV Fault"DCHP_LTU1_555_OUT_LIMSW_NEGX" POSITION Added Channel 28 2 1 -- DCHP_LTU1_555_OUT_LIMSW_NEGX POSITION Adding new Link Node Channel 28.2.2 to database Check if already in ZFAULT: ZDEVICE=DCHP_LTU1_555_OUT_LIMSW_POSX and ZNAME=POSITION Not found, so adding PV Fault"DCHP_LTU1_555_OUT_LIMSW_POSX" POSITION Added Channel 28 2 2 -- DCHP_LTU1_555_OUT_LIMSW_POSX POSITION Adding new Link Node Channel 28.2.3 to database Check if already in ZFAULT: ZDEVICE=DCHP_LTU1_545_OUT_LIMSW_NEGY and ZNAME=POSITION Not found, so adding PV Fault"DCHP_LTU1_545_OUT_LIMSW_NEGY" POSITION Added Channel 28 2 3 -- DCHP_LTU1_545_OUT_LIMSW_NEGY POSITION Adding new Link Node Channel 28.2.4 to database Check if already in ZFAULT: ZDEVICE=DCHP_LTU1_545_OUT_LIMSW_POSY and ZNAME=POSITION Not found, so adding PV Fault"DCHP_LTU1_545_OUT_LIMSW_POSY" POSITION Added Channel 28 2 4 -- DCHP_LTU1_545_OUT_LIMSW_POSY POSITION Adding new Link Node Channel 28.2.5 to database Check if already in ZFAULT: ZDEVICE=DCHP_LTU1_555_GAP_LIMSW_NEGZ and ZNAME=POSITION Not found, so adding PV Fault"DCHP_LTU1_555_GAP_LIMSW_NEGZ" POSITION Added Channel 28 2 5 -- DCHP_LTU1_555_GAP_LIMSW_NEGZ POSITION Adding new Link Node Channel 28.2.6 to database Check if already in ZFAULT: ZDEVICE=DCHP_LTU1_555_GAP_LIMSW_POSZ and ZNAME=POSITION Not found, so adding PV Fault"DCHP_LTU1_555_GAP_LIMSW_POSZ" POSITION Added Channel 28 2 6 -- DCHP_LTU1_555_GAP_LIMSW_POSZ POSITION Adding new Link Node Channel 28.2.7 to database Check if already in ZFAULT: ZDEVICE=DCHP_LTU1_545_GAP_LIMSW_NEGZ and ZNAME=POSITION Not found, so adding PV Fault"DCHP_LTU1_545_GAP_LIMSW_NEGZ" POSITION Added Channel 28 2 7 -- DCHP_LTU1_545_GAP_LIMSW_NEGZ POSITION Adding new Link Node Channel 28.2.8 to database Check if already in ZFAULT: ZDEVICE=DCHP_LTU1_545_GAP_LIMSW_POSZ and ZNAME=POSITION Not found, so adding PV Fault"DCHP_LTU1_545_GAP_LIMSW_POSZ" POSITION Added Channel 28 2 8 -- DCHP_LTU1_545_GAP_LIMSW_POSZ POSITION Adding new Link Node Channel 10.4.2 to database Adding new PV Device Type "USEG" to database Check if already in ZFAULT: ZDEVICE=USEG_UND1_1_ALL_OUT and ZNAME=STATE Not found, so adding PV Fault"USEG_UND1_1_ALL_OUT" STATE Added Channel 10 4 2 -- USEG_UND1_1_ALL_OUT STATE Adding new Link Node Channel 10.4.3 to database Check if already in ZFAULT: ZDEVICE=DCHP_LTU1_545_WDOG_SUM and ZNAME=STATE Not found, so adding PV Fault"DCHP_LTU1_545_WDOG_SUM" STATE Added Channel 10 4 3 -- DCHP_LTU1_545_WDOG_SUM STATE Adding new Link Node Channel 10.4.4 to database Check if already in ZFAULT: ZDEVICE=DCHP_LTU1_545_BPM_INTOL and ZNAME=THRESHOLD Not found, so adding PV Fault"DCHP_LTU1_545_BPM_INTOL" THRESHOLD Added Channel 10 4 4 -- DCHP_LTU1_545_BPM_INTOL THRESHOLD The following devices will be added: 40 1 16 CXI SC3 VGC_01 OPN_DI POSITION IS_NOT_OPEN IS_OPEN 1 Valve is not open Adding new PV area "SC3" to database Adding new device area "SC3" to database Check if already in ZFAULT: ZDEVICE=CXI_SC3_VGC_01_OPN_DI and ZNAME=POSITION Not found, so adding PV Fault"CXI_SC3_VGC_01_OPN_DI" POSITION Added Channel 40 1 16 -- CXI_SC3_VGC_01_OPN_DI POSITION