Logic 2016-08-25-a ------------- * Build against database 2016-08-25-a in order to test analog link node inputs. No logic changes. Logic 2016-05-10-a ------------- * Again, minor change to state names for these truth tables: FEE Spectrometer Crystal - Beam Energy Too Low When Crystal Not Out FEE Spectrometer Crystal - Pulse Energy Too High When Crystal Not Out Gas Detector Problem When FEE Spectrometer Crystal Not Out Logic 2016-05-02-a ------------- * Remove unused and obsolete device TIUKEYSW aka TIU:IN20:1:KEY_SWITCH_STATE * Rename Spoiler: SP0 DMP1 765 Position to Spoiler SP0 DMP1 765 Position Logic 2016-04-29-a ------------- * Minor change to state names for these truth tables: FEE Spectrometer Crystal - Beam Energy Too Low When Crystal Not Out FEE Spectrometer Crystal - Pulse Energy Too High When Crystal Not Out Gas Detector Problem When FEE Spectrometer Crystal Not Out Logic 2016-04-26-a ------------- * New truth tables for FEE spectrometer crystal protection FEE Spectrometer Crystal - Pulse Energy Too High When Crystal Not Out Gas Detector Problem When FEE Spectrometer Crystal Not Out **Linear parent logic unless otherwise noted** Logic 2016-04-24-a ------------- * No logic changes. Modify Makfile to use scripts/version1-0-6 Logic 2016-03-01-a ------------- * "FEE Solid Attenuators - Gas Pressure Interlock": allow SATTs 3 and 4 to be IN Logic 2016-02-26-a ------------- * Remove obsolete inputs and associated logic - should not affect algorithm Logic 2016-02-25-a ------------- * Remove obsolete inputs and associated logic - should not affect algorithm Logic 2016-02-24-a ------------- * Remove Dechirper BPM interlocks * Remove dangling unused database objects - should not affect algorithm Logic 2016-02-12-a ------------- * Update LTU Horizontal Dechirper Gap truth table now that we have 2 independent gap switches Logic 2016-01-22-b ------------- Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out Logic 2016-01-22-a - BASED ON 2015-12-17-a ------------- Rename some inputs to match their PV names. See changes.log for details. Logic 2015-12-17-b ------------- Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out Logic 2015-12-17-a - BASED ON 2015-11-09-a ------------- * Remove unused duplicate truth table * Fix XRT S5 state names (Moving and Broken were swapped) * Update LTU Vertical Dechirper Gap truth table now that we have 2 independent gap switches Logic 2015-11-09-b ------------- Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out Logic 2015-11-09-a - BASED ON 2015-10-10-a ------------- * Remove photon logic: HXX:HXM:VGC:01 Gate Valve Position HXX:HXM:VGC:02 Gate Valve Position HXX:HXM:VGC:03 Gate Valve Position XRT HXRAY MXT Isolation Valve HXX-MXT-VGC-01 NEH AMO Focusing Optics Entrance Gate Valve KBO-VGC-01 NEH AMO Focusing Optics Exit Gate Valve KBO-VGC-02 NEH AMO LAMP Gate Valve VGC 30 Position NEH AMO LAMP Gate Valve VGC 30 Is In Beam NEH AMO LAMP Gate Valve VGC 30 Is Out of Beam * Add photon logic: NEH AMO Valves Ok for Beam - Summary From PLC MEC BXL VGC 01 Gate Valve Position XRT HXRAY MXT Gate Valve HXX:MXT:VGC:01 XRT HXRAY MXT Gate Valve HXX:MXT:VGC:02 XRT HXRAY MXT Gate Valve HXX:MXT:VGC:03 XRT HXRAY MXT Gate Valve HXX:MXT:VGC:05 * Add ignore devices to TDUND Position * Remove B4C Position * Remove Temperature RTD Summary: North Arc Logic 2015-10-10-b ------------- Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out Logic 2015-10-10-a ------------- Remove LTU Dechirper - Undulators Must Be Out If Dechirper Not Out Logic 2015-10-09-a - BASED ON 2015-09-08-a ------------- Add MEC DV4 VCG 01 Gate Valve Position Use database version 2015-10-09-a Logic 2015-09-08-z: NON-LINEAR LOGIC ------------- This is a version to be used ONLY for LTU Dechirper commissioning. It is based on 2015-09-04-a with these changes: * Add commissioning Dechirper logic: LTU Dechirper Commissioning - BPM 550 Watchdog LTU Dechirper Commissioning - BPM 550 X/Y Position LTU Dechirper Commissioning - TDUND Must Be In Logic 2015-09-08-a ------------- * Add production Dechirper logic: LTU Dechirper - Undulators Must Be Out If Dechirper In LTU Dechirper - 10 Hz Raw Limit if Jaws Not Out LTU Dechirper - BPM 550 Watchdog LTU Dechirper - BPM 550 X/Y Position LTU Dechirper - Horizontal Gap Too Small LTU Dechirper - Vertical Gap Too Small Ignore device: LTU Dechirper Is Out Logic 2015-09-04-a ------------- * Add truth table "MFX Gate Valves Not All Open - PLC Summary Status" Logic 2015-09-03-a ------------- * Add truth table "VVFV IN20 785 Position" * Add Dechirper BLF truth tables: "BLM Heartbeat: Dechirper LTU1 BLF545" "BLM Pedestal Thresholds: Dechirper LTU1 BLF545" "BLM Raw Charge Thresholds: Dechirper LTU1 BLF545" * Set "XPP CS-PAD 1 Detector Damage Fault" inactive Logic 2015-07-13-b ------------- * Explicity add inputs for is-code logic (those that were missing) to support MPS GUI improvements * Update logic for CXI:SC3:VGC:01. See changelog for details. Logic 2015-07-13-a ------------- * Add new truth table for CXI gate valve: "CXI:SC3:VGC:01 Gate Valve Position" * Modify BC1 toroid comparator state names to reflect new threshold Logic 2015-05-18-a ------------- * Add new truth table FEE Solid Attenuators - Gas Pressure Interlock * Modify ignore device lists for: HXR - Beam Energy Too Low With M1S Out FEE Spectrometer Crystal - Beam Energy Too Low When Crystal Not Out Logic 2015-05-04-a ------------- * Add new devices: LN42 trigger; LTU dechirper BLF * Add truth table PIC Trigger Missed (LN42) * Remove duplicate truth table Mirror BL21 Position * Per CATER request, add MAD names to OTR/YAG truth tables. Then, to be consistent, add unit numbers to other OTR/YAG truth tables Logic 2015-03-04-a ------------- * Add TD11 Position truth table to fault moving/broken state Logic 2015-03-02-c ------------- * Remove BX01/BX02 and BXG from ignore device lists for truth tables also ignored by TD11 * Remove duplicate Flowswitch: COLL BSYA 1015 (PC10) * Rename BSY GLAST Target to BSY GLAST Target Position * Remove duplicate Linac slow and fast valves Logic 2015-03-02-b ------------- * Rename TIU, flow switch, IMPS Heartbeat, Pockels Cell truth tables for clarity and consistency Logic 2015-03-02-a ------------- * Remove duplicate truth tables: TIU: DPS Temperature TIU: Fast Shutter 2 Position: LI30 TIU: Fast Shutter 2A Position: LI30 YG BL241 Position YG BL351 Position * Change TIU:MCC Emergency Radiation Stopper to be always evaluated (never ignored) * Add D2 as ignore device for HXRSS logic Logic 2015-02-27-a ------------- * New truth table 'YAG02 Is In' * New ignore device 'YAG02 Is In' * Add 'YAG02 Is In' ignore device to all devices ignored by YAG01 *except* Wakefield Shield Gun Spectrometer Wakefield Shield Straight Ahead BXG Status Toroid Peak Current Monitor IM01 YG BL241 Position YAG IN20 241 Position * Change 'BLM/PIC Watchdog: IN20' and 'TIU: VVS: Circuit Breaker: LI20" to be always evaluated (previously ignored by YAG01) * Remove obsolete truth table Profile Monitor BSY0 45 - Deprecated Logic 2015-02-26-a ------------- * Rename ignore device 'YG BL211 Is In' to 'YAG01 Is In' *************Out-of-band release****************** Logic 2015-01-07-b ------------- * NOTE: this version is a pseudo-branch, containing just 2 changes from 2015-01-07-a. Last-minute release to support LCLS MD activities: - Ignore 30-9 slow valve if TD11 is IN This algorithm was unloaded at the end of the MD and the logic changes in this release are NOT included in any subsequent releases ************************************************** Logic 2015-01-07-a ------------- * Add TDUND flow switch logic * Reorganize Profile Monitor BSY0 45 logic to take advantage of ignore devices instead of using stopper positions as inputs to logic. Set 'Profile Monitor BSY0 45' logic to Not Active Add 2 new truth tables: 'Profile Monitor BSY0 45 Position' and 'Profile Monitor BSY0 45 Position When D2 or TDUND Not In' * Fix typo in truth table name. Change 'FEE Spectrometer Crystal - Beam Energy Too Low With Crystal Out' to 'FEE Spectrometer Crystal - Beam Energy Too Low When Crystal Not Out' Logic 2014-12-05-a ------------- * Add logic to protect FEE spectrometer crystal from low energy beam Logic 2014-10-24-a ------------ * Add truth tables XPP SB2 VGC 02 Gate Valve Position XPP SB2 VGC 03 Gate Valve Position Logic 2014-10-16-a ------------ * BCS PIC RAW Charge Threshold DMP 997/998: add D2 to ignore list * OTR21/OTR22 Position: add TD11 To ignore list * OTR30/OTR33 Position: add TD11 and D2 to ignore list Logic 2014-10-10-a ------------ * Set 'Stopper: ST1/ST2 Position' to only be ignored if D2 IN Logic 2014-10-01-a ------------ * Add HXR Beam Energy with M1S Out truth table Logic 2014-09-24-a ------------ * Cleanup of photon logic ignore device lists See changes.log for more information Logic 2014-09-23-a ------------ * Add new ignore device SP0 spoiler, add it as ignore device to appropriate truth tables Logic 2014-07-02-a ------------ * Modify D2 logic to rate-limit beam to 10 Hz (from 120) when D2 is IN * Update PIC HVPS input names to be consistent * Add truth tables for missing PIC HVPS inputs: LI20, LI24, BSY * Fix ignore devices for LI24 BLM/PIC watchdog Logic 2014-06-09-a ------------ * Added logic for DMP SP0 Spoiler Position Logic 2014-05-30-a ------------ * Remove photon M3H from lists of ignore devices Logic 2014-05-13-a ------------ * Remove CXI Detector Damage truth tables * Set B4C Protection of ST1/ST2 inactive * Update B4C Position * BSY RTD truth table name cleanup * Fix incorrect LHS mitigation rate assignment for some non-LHS-related truth tables Logic 2014-03-31-a ------------ * Update CXI valve logic per A. Wallace Logic 2014-03-12-a ------------ * Update CXI Configurations 2 and 7 per A. Wallace Logic 2014-02-28-a ------------ * Changed names and removed channels for CXI. * Updated CXI configuration summary logic * Added D2 as Ignore Device for many CXI truth tables Logic 2014-02-26-a ------------ * Update SXRSS Mode logic; remove temporary mode truth tables that were created for commissioning Logic 2014-02-21-a ------------ * Cleaned up FEE1 M1S Mirror Beam Energy Upper Limit truth table Logic 2014-02-06-a ------------ * No logic changes * Use database 2014-01-06-a to pick up databaseCommon/version1-0-4, which adds channel access security to MPS bypasses Logic 2014-01-06-a ------------ * 50PC30, 50PC45, PC0119 - no longer ignore when A-Line B1/B2 Is Not On AND A-Line Kicker Is Not Enabled (never should have been the case) * SXRSS: Add individual truth tables for each insertable device; Modify mode logic to take advantage of these new tables Logic 2013-12-17-a ------------ * SXRSS Mode: Seeded Mode: Allow M3 to be either IN or OUT (previously required to be IN) Logic 2013-12-02-a ------------ * Modifications to HXR Beam Energy Lower Limit for future use and set inactive for now * Add FEE1 M1S Mirror State to check for inconsistencies * Add S5B to ignore list for HF4 LAM VGC 01 Gate Valve Position * Add D2 to ignore list for B4C Protection of ST1/ST2 Logic 2013-11-11-a ------------ * Enable production SXRSS Mode State; disable temporary SXRSS Mode State - Chicane, Slit, and M3 Active Logic 2013-10-28-a ------------ * A-line IV40: Ignore when 'SL10 Closed' or 'B1/B2 Off and A-line Kicker not enabled' Logic 2013-10-15-a ------------ * Changes for next AMO run: -Remove NEH AMO Diagnostics Chamber Gate Valve -Remove ANEH AMO HFP Beam Stop -Remove NEH AMO End Station Ready -Remove NEH AMO High Field Physics Chamber Gate Valve Summary -Add NEH AMO LAMP VGC 30 Position truth tables Logic 2013-10-10-a ------------ * Modify PSI Profile Monitor truth table to use YAGS:LTU1:743 inputs instead of OTRS:LTU1:743 inputs; changed truth table name to use YAG instead of OTR Logic 2013-10-04-a ------------ * Add logic for SXRSS with Chicane, Slit, and M3 Active (for M3 test) * Remove previous M3 standalone logic; not needed * Add LTU PSI profile monitor logic Logic 2013-09-24-a ------------ * Add logic for BSY GLAST Target Flow Switch * Add logic for SXRSS M3 (temporary for test of mirror only) * Modify logic for BSY collimator 65, 67, 69, 71, 73, 75) flow switches so that they are not masked by "A-Line B1/B2 Is Not On AND A-Line Kicker Is Not Enabled" * Revive Inactive BSY GLAST Target Klixon with new logic Logic 2013-08-28-a ------------ * Modify Ignore Device A-Line B1/B2 Is Not ON and A-Line Kicker Is Not Enabled: - Replace power supply ON status with 2 new OFF status inputs from PPS * Per R. Iverson, modify BSY PR45 logic to require D2 or TDUND to be IN if PR45 IN * Per R. Iverson, M. Stanek remove SXR lower energy limit Logic 2013-08-02-a ------------ * Add SXRSS logic and devices * Active SXRSS logic assumes only slit and chicane are installed * Inactive SXRSS logic added for potential future use: - All SXRSS devices installed - slit, chicane, M2, M3 installed Logic 2013-07-19-a ------------ * Per CATER 109696, add fault if A-line IV26 NOT_OUT * Add missing state names for B4C protection Logic 2013-07-08-a ------------ * Per CATER request 109199, add fault if B4C IN Existing B4C and ST1_ST2 interlocks remain in place * Add protection of M1S mirror; cause fault if energy high and mirror not out Logic 2013-06-15-a ------------ * Per Cater#108919 Regarding mitigating potential B4C damage while running low energy. In attendance were Rad Physics, Paul Miller, John Arthur, Roger, Jim Turner, and M. Stanek. The interim solution for allowing low energy running without a BAS 2 mJ limit was an agreement that we would not allow photons on the ST0 B4C piece at all. Sayed Rokni accepted that as an interim measure, we would use MPS to ensure this condition. What is need required: If ST1/ST2 = Not OUT, Zero rate fault the Gun. This fault should have an 'ignore condition' when TDUND is in, D2 is in, TD11 is in, BX01/02 is NOT ON, YAG BL211 is IN, BXG is ON. Existing B4C ST1_ST2 shall stay in place. Logic 2013-06-13-a ------------ * Change D2 Stopper State Strings. Bit 0 and 1 were reversed. Change does not affect logic only readback status string Logic 2013-06-03-a ------------ * Add logic for GLAST Target in BSY * Add logic for Vac Valve BSY 4005 (IV40) Logic 2013-05-27-a ------------ * Add New STPR 60 System C-code logic, all must be IN or OUT. Change Ignore logic status to use new D2 IN bits and De-Activate D2 Logic from BCS * Add TDUND IN to Prof BSY 45 logic per R.Iverson * De-Activate A-Line LGPS/COR magnets from A-Line logic per R. Iverson and J. Nelson - lgps ab01 1010, 1090, 1950, 2050, 2750, 2850, and xcor 2890, 3212, and ycor 2911, 3313. * De-Activate A-Line GLAST Klixon per R. Iverson and J. Nelson Logic 2012-12-10-a ------------ * Change logic for HXRSS Mode logic per Heinz-Dieter Nuhn: - HXRSS bend lints changed from 12.7