******************************************* **************** Logic Add **************** ******************************************* Device 'MOVR_UNDS_5013_IN_LMTSW_POSITION' added to the logic database. Device 'MOVR_UNDS_5013_OUT_LMTSW_POSITION' added to the logic database. ====================================== Adding PEPPEX Zone Plate Position Added truth table "PEPPEX Zone Plate Position" (2075) Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when TD11 Is In Ignored when STCLTS Is In Ignored when TDUNDB Is In Input 0: MOVR_UNDS_5013_OUT_LMTSW_POSITION Input 1: MOVR_UNDS_5013_IN_LMTSW_POSITION Adding state "Moving" Gun Linac: None Mechanical Shutter: None BYKIK: None Laser Heater Shutter: None Gun HXR: None Gun SXR: None BYKIKS: 0 Adding state "Out" Gun Linac: None Mechanical Shutter: None BYKIK: None Laser Heater Shutter: None Gun HXR: None Gun SXR: None BYKIKS: 120 Adding state "In" Gun Linac: None Mechanical Shutter: None BYKIK: None Laser Heater Shutter: None Gun HXR: None Gun SXR: None BYKIKS: 120 Adding state "Broken" Gun Linac: None Mechanical Shutter: None BYKIK: None Laser Heater Shutter: None Gun HXR: None Gun SXR: None BYKIKS: 0 ====================================== Adding TDUNDB Position (30 Hz) Added truth table "TDUNDB Position (30 Hz)" (2076) Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when TD11 Is In Ignored when STCLTS Is In Input 0: DUMP_LTUS_972_OUT_LIMIT_POSITION Input 1: DUMP_LTUS_972_IN_LIMIT_POSITION Adding state "Moving" Gun Linac: None Mechanical Shutter: None BYKIK: None Laser Heater Shutter: None Gun HXR: None Gun SXR: None BYKIKS: 0 Adding state "Out" Gun Linac: None Mechanical Shutter: None BYKIK: None Laser Heater Shutter: None Gun HXR: None Gun SXR: None BYKIKS: 120 Adding state "In" Gun Linac: None Mechanical Shutter: None BYKIK: None Laser Heater Shutter: None Gun HXR: None Gun SXR: None BYKIKS: 30 Adding state "Broken" Gun Linac: None Mechanical Shutter: None BYKIK: None Laser Heater Shutter: None Gun HXR: None Gun SXR: None BYKIKS: 0 ====================================== ******************************************** **************** Device Add **************** ******************************************** The following devices will be added: 213 3 2 MOVR UNDS 5013 IN_LMTSW POSITION IS_NOT_IN IS_IN 1 PEPPEX Zone Plate In Switch 213 3 3 MOVR UNDS 5013 OUT_LMTSW POSITION IS_NOT_OUT IS_OUT 1 PEPPEX Zone Plate Out Switch not lp is lp fault is false Adding new Link Node Channel 213.3.2 to database Check if already in ZFAULT: ZDEVICE=MOVR_UNDS_5013_IN_LMTSW and ZNAME=POSITION Not found, so adding PV Fault"MOVR_UNDS_5013_IN_LMTSW" POSITION Added Channel 213 3 2 -- MOVR_UNDS_5013_IN_LMTSW POSITION not lp is lp fault is false Adding new Link Node Channel 213.3.3 to database Check if already in ZFAULT: ZDEVICE=MOVR_UNDS_5013_OUT_LMTSW and ZNAME=POSITION Not found, so adding PV Fault"MOVR_UNDS_5013_OUT_LMTSW" POSITION Added Channel 213 3 3 -- MOVR_UNDS_5013_OUT_LMTSW POSITION ====================================== ***************************************************** **************** Device/Logic Delete **************** ***************************************************** Changes report ------------------ Deleted logic and logic that lost an ignore condition: TDUNDB Position (10 Hz) ======================================