
Config 2024-08-13-a
-------------
No Changes

Config 2024-01-30-a
-------------
* Remove WIGG:LTUS:726:US_IN
* Remove WIGG:LTUS:726:US_OUT
* Remove WIGG:LTUS:726:DS_IN
* Remove WIGG:LTUS:726:DS_OUT

Config 2023-12-17-a
-------------
* Remap YAGS:IN20:921, OTRS:IN20:571, OTRS:IN20:711, OTRS:IN20:465, and OTRS:IN20:471 for injector profile monitor upgrade

Config 2023-08-23-a
-------------
* Did not make any config changes

Config 2023-07-31-a
-------------
* No new configuration changes

Config 2023-07-30-a
-------------
* Add HXR and SXR FACMODE PV inputs to LN195 (CLTS ATCA Link Node)

Config 2023-07-28-b
-------------
* Move BPMS_UNDS_2590 from LN 195 to LN 203

Config 2023-07-28-a
-------------
* Remove STCLTS Temperature input - the RTD is not installed

Config 2022-11-10-a
-------------
Add:
* YAGPSI OUT, P1, P2 to LN 134 (rename OUT and IN to OUT_LMTSW and P1_LMTSW)
* OTRDL18 OUT, P1, P2 to LN 205
* VVMG UNDH 1338 to LN 139 (CBXFEL)
* VVMG UNDH 1343 to LN 139 (CBXFEL)
* VVMG UNDH 2138 to LN 139 (CBXFEL)
* VVMG UNDH 2143 to LN 139 (CBXFEL)

Config 2022-07-25-a
-------------
* Move BSY PPS stopper inputs from mode switching HPS link nodes to Link Node 25 in B005

Config 2022-07-18-a
-------------
Add 3 signals to Link Node 25 for HX2:
S1 CH1 = HXRC:B969:1:ROOM_LEL
S1 CH2 = HXRC:B969:1:RCBR_LEL
S1 CH3 = HXRC:B969:1:TIMER

Config 2022-04-21-a
-------------
* Move SH2 OUT switch to LN40 card 5 channel 7

Config 2022-04-07-a
-------------
* Add PEPPEX Zone plate (MOVR:UNDS:5013) IN_LMTSW to LN 213 card 3 ch 2 (Ch 25)
* Add PEPPEX Zone plate (MOVR:UNDS:5013) OUT_LMTSW to LN 213 card 3 ch 3 (Ch 26)


Config 2022-03-16-a
-------------
* Add VVMG UNDS 4998 to LN 213 card 3 channel 1

Config 2022-01-13-a
-------------
* Add LN 147 (CBXFEL)
  * CBLM:UNDH:4775 I0 and I1
  * BPMS:UNDH:4790 X and Y
  * SIOC:UNDH:MP11:HEARTBEAT

Config 2021-09-21-a
-------------
* Fxi channel mapping of inputs from SXRSS MpsSupport

Config 2021-09-20-c
-------------
No Config Change

Config 2021-09-20-b
-------------
* Fix SXR Guardian and CBLM channels from HXR Link Nodes to SXR Link Nodes

Config 2021-09-20-a
-------------
* Remove PICM_ESA0_1_HV signal - it is flakey physically and no logic behind it

Config 2021-09-19-a
-------------
* Remove all CBLM Alive faults and replace with 2 summary faults - actual watchdog is handled in MpsSupport now
* Remove all CBLM RMON faults and replace with 2 summary faults - actual math is handled in MpsSupport now
* Revive SXRSS inputs and logic and update for new beamline
* Add 8 additional inputs to LN 216 for PCDS


Config 2021-06-29-a
-------------
* No config changes

Config 2021-04-30-a
-------------
* Move BPMS_1990_Y input to different link node
* Add input to LN195 for IN20 laser heater power PV reading

Config 2021-04-24-a
-------------
Readd inputs for HXRSS with correct UNDH and position (girder 28) names:
* VVMG UNDH 2838
* VVMG UNDH 2844
* Crystal In encoder position
* crystal out limit switch
* crystal valid state
* BEND DMPH 400 BRANGE
* BEND UNDH 2810 ON/OFF and INTOL

Config 2021-03-25-a
-------------
Remove inputs from LN125 and LN196 - these are SC only and do not need to be part of LCLS1



Config 2021-03-23-a
-------------
Move soft inputs around to better handle LCLS2

Config 2021-03-18-a
-------------
* Add HXR HOMS Fast Fault to link node 145 card 3 channel 4 per PCDS

Config 2021-03-02-a
-------------
Add VVMG LTUS 505 to link node 205

Config 2021-02-24-a
-------------
* Add MR1K1 Is Out signal in photon area


Config 2021-01-11-a
-------------
* Add link processor inputs for SXR and HXR wire scanner mode

Config 2020-12-11-a
-------------
* Add inputs OUT / IN for:
SXRSS M1
SXRSS M2
SXRSS M3
SXRSS SLIT
SXRSS BOD10
SXRSS BOD12
into SXR ATCA link nodes

* Move TDUND Flow Switch input from LN34 to LN141

* General cleanup and deletion of devices that are no longer in system

Config 2020-12-10-a
-------------
* Add SW inputs for BPMS UNDH 1305, 1390, 1490, 1690, 1790, and 1890
* Change name of VVMG UNDH 1698 to VVMG UNDH 1798

Config 2020-12-01-a
-------------
* Change name of MPLN_FEES_1_RIXOPTFASTFLT to
  MPLN_FEES_1_RIXVACFASTFLT
* Change name of MPLN_FEES_2_RIXOPTFASTFLT to
  MPLN_FEES_1_RIXOPTFASTFLT

Config 2020-11-12-a
-------------
* New device names for FEES stopper IN positions which will be used for Ignore Devices ST1K4, MR1K1, and ST1K2

Config 2020-11-09-a
-------------
* Remove IOC_UNDH)BP02_MPSSTAT
* Remove GDET_FEE1_CAL_OK
* Remove HYDRECM1, 2, HTEXCH2 per T. Smith.

Config 2020-10-26-a
-------------
* Add faults for RFBHX19 and RFBHX20
* Rename VVPG_UNDH_1998 to VVPG_UNDH_2098

Config 2020-10-16-a
-------------
* Change name of VVPG:UNDH:2198 to VVPG:UNDH:2298
* Add RFBHX15, 22, and 23 X and Y inputs for HXR BPM orbit faults

Config 2020-10-06-a
-------------
* Change BX31 and BX31B to BYD and BYDB (BEND DMPH/S 400)

Config 2020-10-03-a
-------------
* Add VVPG DMPS 355 Vacuum Valve for XLEAP-S
* Add RFBHX18 X and Y PV inputs for girder 18

Config 2020-09-23-a
-------------
No config changes

Config 2020-09-08-a
-------------
No changes - new LP version

Config 2020-09-06-a
-------------
* Add Latching LP fault to check that no BC1 beam comes out when BRCUSDC is ON LP_BC_MODE_BC1
* Add Latching LP fault to check timing and MPS destinations agree LP_DESTINATION_MATCH

Config 2020-09-03-a
-------------
* remove RFBSX51 and RFBHX51 orbit inputs
* Add xleap in / out inputs
* Add 2vacuum valves for SXRSS
* Add SXRSS and HXRSS chincane on / off inputs

Config 2020-08-19-a
-------------
* Rearrange some RF BPM input channels per add_devices.json
* Add TREF and TDES inputs for each kicker (BYKIK, BYKIKS, BKRCUS)

Config 2020-08-07-b
-------------
Set all Magnet current faults to latching

Config 2020-08-06-a
-------------
NoNo config changes. 

Config 2020-08-05-a
-------------
Add VVPG:CLTS:685:POSITION to LN27 Card 1 Channel 8

Config 2020-07-31-c
-------------
Ran out of disk space the first time.  trying again

Config 2020-07-31-b
-------------
Remove CXI:DG4:VGC:01 Gast Valve open and closed

Config 2020-07-31-a
-------------
* remove BPM SXR watchdogs
* Add BPM SXR orbit SW inputs
* Rename some badly named FEES inputs.

Config 2020-07-25-a
-------------
No config changes

Config 2020-07-24-a
-------------
* Remove BPM heartbeat watchdogs
* Add PVs for X and Y UND orbits in LN 127, 129, 130


Config 2020-07-09-a
-------------
Change BLRCUS PIC (PICM:CLTS:280) LOSSL and LOSSH faults to be latching

Config 2020-07-02-a
-------------
Change BPMS_UNDH_2190_ORBIT to a latching fault

Config 2020-06-30-a
-------------
Move BPM 2190 to card 5 channel 5
Remove VVPG DMPH/S 424 - this is handled by PCDS

Config 2020-06-29-a
-------------
Release a version for TDUND proper mitigation after releasing the 30 Hz version

Config 2020-06-27-b
-------------
This is a temporary version that allows beam to TDUND past BYKIK of 30 Hz for low charge commissioning only.

Config 2020-06-27-a
-------------
No config changes

Config 2020-06-26-b
-------------
Change TDUND Position to be 10 Hz rate limit at gun HXR and BYKIK

Config 2020-06-26-a
-------------
No config changes.  This is a version that temporarily allows operations to send 30 Hz to TDUND.  It is only to be used for commissioning, and only with strict administrative controls on the charge.

Config 2020-06-20-a
-------------
Fix up config and logic for beam to TDUND:
* Remove SIOC:LTUH:MP01, MP02, and MP04 heartbeats.  Not needed for LCLS1 MPS
* Move dechirper THz mirror from LN134 to LN132.


Config 2020-06-14-a
-------------
Move SIOC BSYS MP01, MP02, and MP03 from LN203 (doesn't exist) to correct LN 199.

Config 2020-06-09-a
-------------
No Changes to Config

Config 2020-06-08-a
-------------
No Changed to Config

Config 2020-06-01-a
-------------
Correct Channel assignments for HXR Fast Fault (x2) and HXR Spare in LN 145
Add SXR FEE inputs per PCDS input sheet to LN 216

Config 2020-05-22-b
-------------
* Remove BYKIK_WD LP EPICS Input
* Change BEND:DMP1 to BEND:DMPH for 4 EPICS PV LP Faults

Config 2020-05-22-a
-------------
SIOC:LTUH:MP03:HEARTBEAT, MP04m MP05, and MP06 were mistakenly added to the wrong link nodes.  MP03 and MP04 are now in LN132 card 2 ch 9 and 10, and MP05 MP06 are added to LN134 card 2 ch 9 and 10.

Config 2020-05-21-a
-------------
Change EPICS PV Inputs of type QUAD:LTU1 to QUAD:LTUH.  Change associated device name as well

Config 2020-05-04-a
-------------
Add LP faults LP_BYKIK_OK and LP_BYKIKS_OK
Make both faults latching

Config 2020-04-30-a
-------------
* Add Inputs for UND BPM Orbits
* Add Inputs for MPS and BPM Heartbeat watchdogs
* Add Inputs for CBLM alive watchdog
* Add Inputs for CBLM HV status
* All added inputs are set to latch when faulted 

Config 2020-03-24-a
-------------
Remove:
SXR_GMD_VGC_01_OPN_DI_POSITION
SXR_GMD_VGC_01_CLS_DI_POSITION

Config 2020-03-23-b
-------------
The mps_config_gui, for whatever reason, set the autorecoverable flag to true for each new device that was added to the database.  For most inputs, this is fine.  For the undulator beam loss monitors, these faults need to latch.  A script in version1-0-12 interacts with the database and sets these CBLM faults to not autorecover.

Config 2020-03-23-a
-------------
No new configuration.  Logic changes for ATCA link node inputs in PCDS.

Config 2020-03-20-b
-------------
For LN145, FEEH.  Remove placeholder signals and put in correct signals from Alex Wallace / PCDS.  Logic to come in next MpsConfiguration version

Config 2020-03-20-a
-------------
No new config.  Just keeping in sync with logic.

This release should complete the pcds changes for legacy link nodes.

Config 2020-03-19-b
-------------
Incremental change for PCDS.  Remove Stoppers from LN38.  LN38 is now completely gone.

Config 2020-03-19-a
-------------
Incremental Change - Remove PCDS Devices from LN38 and LN39 per Alex Wallace.  Remove Ignore Logic no longer used.

Config 2020-03-18-a
-------------
There was a bug beginning with version 2020-01-27-a that corrupted the database.  This release captures everything that was done in 2020-01-27-a, 2020-03-12-a, and 2020-02-26-a.  The database is not corrputed.


Config 2020-03-12-a
-------------
Add XTCAV Manual (Pneumatic) Valve VVPG:DMPH:355 to Link Node 141
Add Dechirper THz Mirror In/Out switches to LN 134

Config 2020-02-26-a
-------------
Remove 
VVPG_LTUH_999_POSITION:
STPR_BSYS_891_TEMP:
STPR_BSYS_897_TEMP:
VVMG_LTUS_505_POSITION:


Config 2020-01-27-a
-------------
No changes to configuration.  Tag this to keep consistency

Config 2020-01-03-b
-------------
Add PICM:CLTS:280 at BLRCUS to LN42

Config 2020-01-03-a
-------------
Remove DUMP_LTU1_970_TDUND_IN and DUMP_LTU1_970_TDUND_OUT as these inputs, associated with TDUND, are now into a new LCLS2 link node and are no londer needed.

Config 2020-01-02-h
-------------
No config changes, but skip ahead a few letters to get congif back in sync with algorithm

Config 2020-01-02-e
-------------
There was an error in the logic sql database for version 2020-01-02-d.  This version uses 2020-01-02-c as input in an attempt to fix the problem

Config 2020-01-02-d
-------------
No Config Changes

Config 2020-01-02-c
-------------
Rename devices that are to stay after the addition of new LCLS2 beamlines

Config 2020-01-02-b
-------------
Delete devices from legacy link nodes that have either been moved to new ATCA link nodes to share with LCLS2 or are no longer needed due to changes in the beamline.

Config 2020-01-02-a
-------------
Add devices to config for new link nodes with correct PV names and correct inputs.  Please ignore and do not use the previous version of MPS configuration, R2-83

Config 2019-12-02-a
-------------
In this version, I add all the inputs to support the SXR beamlines, but I have not yet removed the un-needed inputs from the old link nodes.  This is initially for testing and commissioning purposes.  No logic has been added yet.

Config 2019-11-12-a
-------------
*New LP fault LP_BKRCUS_FIRE

Config 2019-03-19-a
-------------
* Use new version:
    scripts/version1-0-9
* New LP internal faults
      ALLOWS_BEAM_BYKIKS
      ALLOWS_BEAM_GUN_HXR
      ALLOWS_BEAM_GUN_SXR
      MAX_RATE_BYKIKS_10_HZ
      MAX_RATE_BYKIKS_1_HZ
      MAX_RATE_BYKIKS_30_HZ
      MAX_RATE_BYKIKS_60_HZ
      MAX_RATE_BYKIKS_BURST
      MAX_RATE_BYKIKS_SINGLE_SHOT
      MAX_RATE_GUN_HXR_10_HZ
      MAX_RATE_GUN_HXR_1_HZ
      MAX_RATE_GUN_HXR_30_HZ
      MAX_RATE_GUN_HXR_60_HZ
      MAX_RATE_GUN_HXR_BURST
      MAX_RATE_GUN_HXR_SINGLE_SHOT
      MAX_RATE_GUN_SXR_10_HZ
      MAX_RATE_GUN_SXR_1_HZ
      MAX_RATE_GUN_SXR_30_HZ
      MAX_RATE_GUN_SXR_60_HZ
      MAX_RATE_GUN_SXR_BURST
      MAX_RATE_GUN_SXR_SINGLE_SHOT
      DESTINATION_HXR
      DESTINATION_SXR


Config 2019-03-18-a
-------------
* Use new version:
    scripts/version1-0-7

Config 2018-09-25-a
-------------
* New inputs for LTU Vertical Dechirper 
  downstream mirror 
    MIRR_LTU1_548_OUT_LIMSW
    MIRR_LTU1_548_IN_LIMSW

Config 2018-03-02-a
-------------
* Remove MFX_LENS_1_SAFE

Config 2017-12-13-a
-------------
* Change all PIC/BLM loss and test inputs to be non-autorecoverable
  (latching). Most already had this setting, but a small
  number had been misconfigured. 
* Delete all rate-based PIC/BLM loss inputs. These were
  intended for rate-recovery, whose prospects are currently
  unknown and these input state changes flood the log.

Config 2017-10-17-a
-------------
* Add A-line secondary target IN/OUT status

Config 2017-07-24-a
-------------
* New input XCS:PBT:VGC_OUT_SUM

Config 2017-06-19-a
-------------
* Swap XLEAP mirror 3mm and 5mm position
  inputs (they are currently reversed).


Config 2017-06-08-a
-------------
* New inputs for XLEAP wiggler gap
  and insertable devices


Config 2017-05-24-a
-------------
* Remove obsolete inputs:
    THZR_DMP1_350_OUT_LIMIT
    THZR_DMP1_350_IN_LIMIT

Config 2017-05-22-a
-------------
* Add inputs for XLEAP LTU Beam Loss Fiber

Config 2017-05-13-a
-------------
* Remove OTR22 inputs:
    OTRS_LI25_342_OUT_LMTSW
    OTRS_LI25_342_IN_LMTSW
* For 2017 FEE reconfiguration, many changes.
    See changes.log and supporting files for details.


Config 2017-05-10-b
-------------
* New A-line valve VVPG_BSYA_340_OPEN_LIMSW
* Remove long-obsolete devices:
   DEV_52SL1
   DEV_50B1
   DEV_50PR3OUT
   HVPS_BSY0_54_POWER  
* Remove inputs not needed for BSY Reconfiguration:
   TRGT_BSYA_960_OUT_LIMSW
   TRGT_BSYA_960_IN_LIMSW
   TRGT_BSYA_960_FLOW_SW
   TRGT_BSYA_960_KLIXON
   COLL_BSYH_479_FLOW_SW
   COLL_BSYH_487_FLOW_SW
   COLL_BSYH_495_FLOW_SW
   COLL_BSYH_520_FLOW_SW

Config 2017-04-28-a
-------------
* Replace individual PCAPM flow switches
  with single switch for PCAPM1-4
* Changed PIC channel assignments for
  PCAPM1-4 PICs
* Remove unused constantly cycling PIC inputs
  for new BSYH PICs. Note will need
  to be re-added to implement rate recovery!

Config 2017-04-17-a
-------------
Many changes to support 2017 downtime BSY Reconfiguration of LCLS common-line,
including some A-line related changes. See changes.log and the other supporting
documents for details. 


Config 2016-10-19-a
-------------
* Delete obsolete device inputs:
  Dump B4C
  BSY PR45
  BSY PR55

Config 2016-10-17-a
-------------
* Add new MFX inputs. 
  See changes.log and *diff*.html files for details

Config 2016-08-25-a
-------------
* Add new Analog Link Node 44 and first set of inputs
  See changes.log for details

Config 2016-05-02-a
-------------
* Remove unused and obsolete device
   TIUKEYSW aka TIU:IN20:1:KEY_SWITCH_STATE


Config 2016-04-26-a
-------------
* Delete obsolete dechirper devices
   DCHP_LTU1_545_WDOG_SUM
   DCHP_LTU1_545_BPM_INTOL

* New devices for FEE spectrometer crystal protection 
  XTAL_FEE1_441_PULSEENERGY, LN10, Card 4, Ch 3
  GDET_FEE1_1_CAL_OK, LN10 Card 4, Ch 4
Config 2016-04-24-a
-------------
* No config changes. Modify Makfile.conf to use scripts/version1-0-6

Config 2016-01-22-a
-------------
* Rename some input names to match their PV names. 
  See changes.log for details.

Config 2015-12-07-b
-------------
* Removed unused PV attributes from database.
  For some External PV objects, fill in missing Device Details
  fields. See changes.log for details.

Config 2015-12-07-a
-------------
* Removed unused devicedetails and fault objects from database:

Devicedetails:
THZR LTU1 741 IN_LIMSW
MIRR FEE1 1560 OUT_LIMIT1 (two of these)
MIRR FEE1 1560 OUT_LIMIT2 (two of these)
XTAL FEE1 441 OUT_LIMSW

Faults:
'SPARE'
'02B'
'02A'
'Valve is open'
'A-line Kicker Pulser1': PULSER1_ON, PULSER1_OFF, PULSER1_TRIG_ENB, PULSER1_TRIG_LOCK
'A-line Kicker Pulser2': PULSER2_ON, PULSER2_OFF, PULSER2_TRIG_ENB, PULSER2_TRIG_LOCK
'SL10 CLOSED'
'ST22 OUT'
'THZ-2 Foil Out Switch'
'THZ-2 Foil In Switch'
'FEE spectrometer crystal OUT'

Config 2015-12-01-a
-------------
* Removed duplicate device instances:
  MIRR_FEE1_1560_OUT_LIMIT1 (2 duplicates)
  MIRR_FEE1_1560_OUT_LIMIT2 (2 duplicates)
  XTAL_FEE1_441_OUT_LIMSW (1 duplicate)

Config 2015-11-30-a
-------------
* Remove duplicate PvArea LTU1 from database. 
  Changed all devices that used the deleted instance
  to use the other instance. See changes.log for list
  of affected devices.
* Remove duplicate PvDeviceType BFW from database. 
  Changed all devices that used the deleted instance
  to use the other instance. See changes.log for list
  of affected devices.

Config 2015-11-23-a
-------------
* Remove unused devices:
  FLOOD_SW_OK
  TARGET_EPV_FLOSW_2_OK
  AMO_HFP_MPA_02ASPARE
  MTLM_LOGIC_OK
  STOPPER_2_IN_OUT
  STOPPER_1_IN_OUT
  AMO_HFP_MPA_02BSPARE
  RAD_SHLD_FLOSW_9_OK

* Remove unused LN channels
  LN 40 Card 1 Channel 10
  LN 40 Card 1 Channel 11
  LN 40 Card 2 Channel 9
  LN 40 Card 2 Channel 10
  LN 40 Card 2 Channel 11
  LN 40 Card 3 Channel 11
  LN 42 Card 2 Channel 4
  LN 42 Card 2 Channel 6
  LN 42 Card 3 Channel 8

Config 2015-11-09-a
-------------
* Add MEC_DV4_VGC_01_OPN_DI
* Misc LN 39-41 rename and delete
  for photon-side inputs. Details
  in directory.

Config 2015-10-09-a
-------------
* Add MEC_DV4_VGC_01_OPN_DI

Config 2015-09-03-a
-------------
* Add Dechirper inputs:
    BLM:LTU1:BLF545:LOSS_60_L
    BLM:LTU1:BLF545:LOSS_60_H
    BLM:LTU1:BLF545:TEST_L   
    BLM:LTU1:BLF545:TEST_H   
    BLM:LTU1:BLF545:TEST_1_L
    BLM:LTU1:BLF545:TEST_1_H
    BLM:LTU1:BLF545:PED_L    
    BLM:LTU1:BLF545:PED_H
* Add new IN20 fast valve:
    VVFV:LI20:785:OPEN_LMTSW
* Add new MFX hutch vacuum valve PLC summary:
    MFX_MPS_PLC_VAC_OK

Config 2015-07-13-a
-------------
* Add Dechirper inputs:
    DCHP_LTU1_545_BPM_INTOL_THRESHOLD
    DCHP_LTU1_545_GAP_LIMSW_NEGZ_POSITION
    DCHP_LTU1_545_GAP_LIMSW_POSZ_POSITION
    DCHP_LTU1_545_OUT_LIMSW_NEGY_POSITION
    DCHP_LTU1_545_OUT_LIMSW_POSY_POSITION
    DCHP_LTU1_545_WDOG_SUM_STATE
    DCHP_LTU1_555_GAP_LIMSW_NEGZ_POSITION
    DCHP_LTU1_555_GAP_LIMSW_POSZ_POSITION
    DCHP_LTU1_555_OUT_LIMSW_NEGX_POSITION
    DCHP_LTU1_555_OUT_LIMSW_POSX_POSITION
    USEG_UND1_1_ALL_OUT_STATE
* Add new CXI gate valve open limit switch:
    CXI_SC3_VGC_01_OPN_DI_POSITION

Config 2015-05-18-a
-------------
* Add FEE Gas attenuator pressure threshold interlock
  to LN38: VMPS:FEE1:E202:NOGAS

Config 2015-05-01-a
-------------
* Add LTU Dechirper Beam Loss Fiber channel
  to LN30: BLM:LTU1:BLF545

Config 2015-04-22-a
-------------
* Add PIC LN 42 trigger input status, fault:
  PICM_BSYA_2061_NO_TRIG_MISSED

Config 2014-12-05-a
-------------
* Add fault
  XTAL_FEE1_441_ENERGY
* Rename
  XTAL_FEE1_442_OUT_LIMSW
  to
  XTAL_FEE1_441_OUT_LIMSW

Config 2014-11-25-a
-------------
* Add faults
  KICK:LTU0:320:ABORTWIN
  KICK:LTU0:320:STANDBYWIN
  
Config 2014-10-24-a
------------
* Add inputs
  XPP_SB2_VGC_02_OPN_DI_POSITION
  XPP_SB2_VGC_03_OPN_DI_POSITION

Config 2014-10-16-a
------------
* Add FEE Spectrometer Crystal OUT limit switch

Config 2014-07-02-a
------------
* Add missing BSY PIC HVPS inputs: 2-6
* Update input and state names for all PIC HVPS to
  be consistent

Config 2014-06-09-a
------------
* Added IN and OUT limit switches for DMP SP0 spoiler

Config 2014-02-28-a
------------
* Changed names and removed devices for CXI

Config 2014-02-06-a
------------
* Use databaseCommon/version1-0-4 to add channel acces
  security to MPS bypasses

Config 2013-10-15-a
------------
* Remove AMO_HFP_VGC_02A, AMO_HFP_VGC_02B
* Add AMO_LMP_VGC_30_OPN_DI, AMO_LMP_VGC_30_CLS_DI

Config 2013-10-10-a
------------
* Remove OTRS LTU1 743 OUT/IN LIMITs (PSI profile monitor)
* Add    YAGS LTU1 743 OUT/IN LIMITs (PSI profile monitor)

Config 2013-10-04-a
------------
* Add OTRS LTU1 743 OUT/IN LIMITs (PSI profile monitor)

Config 2013-09-24-a
------------
* Add BSY GLAST Target Flow Switch

Config 2013-08-28-a
------------
* Add A-line B1/B2 OFF status Chains A and B from PPS

Config 2013-08-02-a
------------
* Add SXRSS devices; remove obsolete e+ devices

Config 2013-07-08-a
------------
* Add 2 M1S Mirror Out Limit Switches
* Add M1S Mirror 'Energy OK' input 
  (repurpose unused LN11 'BC1_CID' input for this)

Config 2013-06-03-a
------------
* Add GLAST Target Limit Switches

Config 2012-11-12-a
------------
* Add THZR:LTU1:741:IN_LMTSW, OUT_LMSW limit switches for new THZ-2 
* removed a spare vacuum valve on LN 31, card 1, ch 9 so that we could add
  these limit switches

Config 2012-10-26-a
------------
* Add BEND:DMP1:400:INTOL_BMIN2 which is beam lower E limit of 
  3.3GeV if stoppers SH1 or S2 are not IN

Config 2012-10-15-a
------------
* Add BEND:DMP1:400:INTOL_BMIN which is beam lower E limit of 
  2.3GeV for the Undulator region

Config 2012-09-26-a 
------------
* copied from 2012-09-18-a (skipping 2012-09-15-a)
* add new SXR valve per Photon controls

Config 2012-09-25-a DO NOT USE THIS VERSION
------------
* add new SXR valve per Photon controls
* add new PICMs 380, 381 for XTCAV in DMP1

Config 2012-09-18-a
------------
* add new NEH XPP SH3 stopper status per Photon controls
* add new vacuum valve in DMP at 355 (XTCAV)

Config 2012-08-08-a
------------
* build for epics-3-14-12


Config 2012-06-25-a
------------
* Added BSYA PPS Inputs



Config 2012-06-05-a
------------
* Clean up names of A-Line devices, desc was too long
	
DESC, "SLIT_BSYA_2010_SL10_CLS_LIMIT" to  blahÉLIM instead of LIMIT 
DESC, "STPR_BSYA_2275_ST22_OUT_LIMIT" to  blahÉLIM

* Remove recovery for A-Line Kicker Rate Inputs so that it doesn't fill up Logs when kicker is at rates less than 120Hz.


2012-05-18-a
------------
Update PICM:BSYA to be nonrecoverable.

2012-05-05-a
------------
Add XCOR BSYA Input


2012-04-30-a
------------
* reverted to 2012-03-20-a, 2012-04-22-a had PICM:BSYA channel errors
* Added Link Node 43 for A-Line KICKER (BYKICK TYPE)
* Added inputs in LN42 and 43 for A-Line

2012-04-22-a
------------
* Added Link Node 42 for A-Line PICs along with A-LINE PICMs.

2012-03-20-a
------------
* Added new CXI Valve
* Fix Input typos in LNW_BSO and STPR_BSY_88

2012-01-06-a
------------
* New HXRSS HOZ and YAW Home Status
* Puleo Chassis Updates

2012-01-03-a
------------
* New Fast Shutter in UND Name= VVFS:DMP1:107


2011-11-29-a
------------
* Changed A-Link Kicker Pulser status 1 & 2 per Tony Beukers


2011-11-15-a
------------
* Added new MPS inputs for A-Link Kicker Pulser status 1 & 2

2011-11-07-a
------------
* Adds new inputs for CXI and MEC.

2011-10-31-a
------------
* Add inputs for HXRSS system, re-assigned some iMPS inputs that are not used in logic for HXRSS
* Add RTD soft input for past SL10 A-Line

2011-09-12-a
------------
* Per Mark Arndt The change will be redefining Link Node 40 input on card 4 channel 14.
The new definition is:
[40,  4,   14,  "MEC:HXM:MMS_04:B", "POSITION", "IS_NOT_OUT", "IS_OUT", true, "MEC HXM reference laser mirror out of beam"]


2011-08-26-a
------------
* Per Mark Arndt and CXI: make inputs for the following Logic tables not autorecover 
	CXI CS-PAD 1 Detector Damage Fault
 	CXI CS-PAD 2 Detector Damage Fault
 	XPP CS-PAD 1 Detector Damage Fault

2011-08-01-a
------------
* Per Mark Arndt, add new devices per patch files

2011-07-12-a
------------
* Per Mark Arndt, 
Config and Logic changes are:

Link Node 40 card 1, channel 16  is now CXI_DSU_MMM_07_B_POSITION 
	becomes   CXI_DSD_MMS_07_B_POSITION
Link Node 40 card 6, channel 2   is now XCS_DG3_VGC_01_OPN_DI_POSITION
	becomes   CXI_DSU_MMS_07_B_POSITION

*XCS_DG3_VGC_01_OPN_DI_POSITION is removed from configuration 
	DB and logic DB device list. It was not used on any
	logic tables.

* Add new device (rename a junk name to new device
	CXI_DSD_MMS_07_B_POSITION)
* Change name of CXI_DSU_MMM_07_B_POSITION to CXI_DSU_MMS_07_B_POSITION
* Add revised CXI_Config4 logic C code
* Update CXI_Config5 with name modification (CXI_DSU_MMM_07_B_POSITION 
	to CXI_DSU_MMS_07_B_POSITION)


2011-07-05-a
------------
* Per Mark Arndt, add devices:

    HXX_HXM_MMS_01_B_POSITION
    HXX_MPS_PLC_01_OK_STATUS
    STPR_XRT1_1_S4IN_POSITION
    STPR_XRT1_1_S4OUT_POSITION
    STPR_XRT1_1_S6IN_POSITION
    STPR_XRT1_1_S6OUT_POSITION
    XCS_MPS_PLC_01_OK_STATUS
    XPP_MPS_PLC_01_OK_STATUS


2011-06-15-a
------------
* Per Mark Arndt
* Add XCS inputs, per database patch FEH_XCS_MPS_Patch_File_June2011_r1.json
* Remove obsolete XRT input:
  "XRT:DIA_DET:01:MPSFAULT"

* Clean-up: Remove obsolete FEE stopper inputs:
  "PPS_FEE1_1_STPR01_IN_POSITION"
  "PPS_FEE1_1_STPR01_OUT_POSITION"

2011-05-11-a
------------
*Per Mark Arndt add additional CXI inputs
   change PV Fault/Ok string names for 
  Card 4, channel 4, "CXI:DET_01:MPSFAULT"
  Card 4, channel 5, "CXI:DET_02:MPSFAULT"
  Card 4, channel 6,  "CXI:USR_01:MPSFAULT"
  Card 4, channel 7,  "CXI:USR_02:MPSFAULT"

  In each case, the label for the low/deasserted state should 
     change from "IS_NOT_FAULTED" to "IS_FAULTED".
  Also, the label for the high/asserted state 
        should change from "IS_FAULTED" to "IS_OK".

* Add new RTD soft input for BSY Past D2 per Sonya

Also, the label for the high/asserted state should change from "IS_FAULTED" to "IS_OK".

2011-05-05-a
------------
* Per Mark Arndt and CXI request, added CXI inputs
* Added D2 status

2011-02-26-a
------------
* Per Mark Arndt and CXI request, added EPICS input XRT:DIA_DET:01:MPSFAULT
for "CXI CS-PAD-Damge Fault" logic

2011-02-2-a
------------
* Added BSY PICM HV readback

2011-01-08-a
------------
* Renamed PV attribute of "MPS_STATE" to "PEAKPOWER" for MPS device FLT_20_6_TRP. Also changed OK and Fault name, signal is OK in low state and faulted in high.


2010-12-01-a
------------
* Removed extra HXX:MXT:VGC_01:OPN_DI Position input and removed from logic 

2010-11-29-a
------------
* Added additional CXI MPS inputs per Mark Arndt in LN 40. Re-patched based on 2010-09-28a 

2010-11-22-b
------------
* Added additional CXI MPS inputs per Mark Arndt in LN 40. 

2010-11-22-a
------------
* Added CXI MPS inputs per Mark Arndt in LN 40

2010-09-28a
------------
* Change name and unit # for "TRHZ:DMP1:310" to "THZR:DMP1:350"

2010-09-24a
------------
* Added "VVMG:DMP1:743"

2010-08-300a
------------
* Added "NEH AMO End Station Ready AMO-EXP-MPS-01"

2010-08-17-a
------------
* Added BYKICK watchdog 

2010-08-11-a
------------
* Added A-Line PICM BSYA:1701A and BSYA:1701B  (not auto recoverable)

2010-08-10-a
------------
* Corrected Faulted State Name for:
   "PROF:BSYA:1:OUT_SUM"
   "BEND:BSYA:140:B1_2_PS_ON"
   "COLL:BSYA:1015:FLOW_SW"
   "VVFS:BSYA:1030:POSITION"
   "VVPG:BSYA:1018:POSITION"
* Changed PICM:BSYA to not auto recoverable

2010-08-04-a
------------
!NOTE: based on 2010-07-06-a 
* Added more A-line devices (PICS, EPICS, Digital) 

2010-08-03-a
------------
* Added more A-line devices

2010-07-29-a
------------
* Added A-line devices (including PICs)

2010-07-06-a
------------
* Made BSY PIC inputs latching

2010-06-30-a
------------
* 11/3/12: DUMP_LI21_FLSW_OPEN -> COLL_LI21_235_OPEN
* 11/3/12: DUMP:LI21:305:FLOW_SW_MPSC -> COLL:LI21:235:FLOW_SW_MPSC

2010-06-21-a
------------
* Added LN 25 PIC inputs

2010-06-16-b
------------
* Added NO_TRIG inputs to LN 11, 16, and 22

2010-06-16-a
------------
* Removed PIC autorecover

2010-06-15-c
------------
* Removed PICs from LN 23, 25, and 26

2010-06-15-b
------------
* Corrected Link Node types

2010-06-15-a
------------
* Added PIC Inputs for
    * 11/1/1
    * 11/1/2
    * 11/1/3
    * 11/1/4
    * 11/1/5
    * 11/1/6
    * 16/1/1
    * 16/1/2
    * 22/1/1
    * 22/1/2
    * 22/1/3
    * 22/1/4
    * 22/1/5
    * 22/2/1
    * 22/2/2
    * 22/2/3
    * 22/2/4
    * 22/2/5
    * 23/1/1
    * 25/1/1
    * 25/1/2
    * 25/1/3
    * 25/1/4
    * 25/1/5
    * 25/1/6
    * 25/1/7
    * 25/1/8
    * 26/2/1
    * 26/2/2
    * 26/2/3
    * 26/2/4
    * 26/2/5

2010-05-20-b
------------
* Made TORO:IN20:971 inputs latching.

2010-05-20-a
------------
* Renamed BLM:UND1:4:TIMING(_L, _H, _1_L, _1_H) to
  BLM:UND1:4:HRTBT(_L, _H, _1_L, _1_H).

2010-05-04-a
------------
* Made BYKIK thresholds latching.

