
MpsConfiguration-R2-207

Config 2022-11-10-a
-------------
Add:
* YAGPSI OUT, P1, P2 to LN 134 (rename OUT and IN to OUT_LMTSW and P1_LMTSW)
* OTRDL18 OUT, P1, P2 to LN 205
* VVMG UNDH 1338 to LN 139 (CBXFEL)
* VVMG UNDH 1343 to LN 139 (CBXFEL)
* VVMG UNDH 2138 to LN 139 (CBXFEL)
* VVMG UNDH 2143 to LN 139 (CBXFEL)

Logic 2022-11-10-a
-------------
Add:
* YAGPSI and OTRDL18 PAL Logic (3 position actuator and 5 "broken" states)
* Vac OPEN/NOT_OPEN logig for 4 CBXFEL valves listed above

MpsConfiguration-R2-206

Config 2022-07-25-a
-------------
* Move BSY PPS stopper inputs from mode switching HPS link nodes to Link Node 25 in B005

Logic 2022-07-25-a
-------------
* Logic remains the same

MpsConfiguration-R2-205

Config 2022-07-18-a
-------------
Add 3 signals to Link Node 25 for HX2:
S1 CH1 = HXRC:B969:1:ROOM_LEL
S1 CH2 = HXRC:B969:1:RCBR_LEL
S1 CH3 = HXRC:B969:1:TIMER

Logic 2022-07-18-a
-------------
Add logic for HX2 inputs.  Must be true or beam trips off.

MpsConfiguration-R2-204

Logic 2022-06-27-a
-------------
* Rename logic for YAGS:LI21:995 to YAGS:IN20:995

MpsConfiguration-R2-203

Logic 2022-06-24-a
-------------
* "Remove" (set all mitigation to 120 Hz) log per D. Zhu area physicist for:
1.  XPP SB2 VGC 02 Gate Valve Position
2.  XPP SB2 VGC 03 Gate Valve Position
3.  XPP SB2 VGC 04 Gate Valve Position

MpsConfiguration-R2-202

Config 2022-04-21-a
-------------
* Move SH2 OUT switch to LN40 card 5 channel 7

Logic 2022-04-21-a
-------------
* No logic changes

MpsConfiguration-R2-201

Logic 2022-04-07-b
-------------
* Change TDUNDB In to 10 Hz limit

MpsConfiguration-R2-200

Config 2022-04-07-a
-------------
* Add PEPPEX Zone plate (MOVR:UNDS:5013) IN_LMTSW to LN 213 card 3 ch 2 (Ch 25)
* Add PEPPEX Zone plate (MOVR:UNDS:5013) OUT_LMTSW to LN 213 card 3 ch 3 (Ch 26)


Logic 2022-04-07-a
-------------
* Add PEPPEX Zone Plate mover logic 
* Make TDUNDB IN = 30 Hz rate limit

MpsConfiguration-R2-199

Config 2022-03-16-a
-------------
* Add VVMG UNDS 4998 to LN 213 card 3 channel 1

Logic 2022-03-16-a
-------------
* Add logic for VVMG UNDS 4998

MpsConfiguration-R2-198

Logic 2022-01-13-b
-------------
BLMH47 logic pointed to wrong database entry.  It pointed to BLMH27.  Fixed it

MpsConfiguration-R2-197

Config 2022-01-13-a
-------------
* Add LN 147 (CBXFEL)
  * CBLM:UNDH:4775 I0 and I1
  * BPMS:UNDH:4790 X and Y
  * SIOC:UNDH:MP11:HEARTBEAT

Logic 2022-01-13-a
-------------
* Add Logic for CBXFEL:
  * CBLM:UNDH:4775 Single Shot and 500 ms
  * BPMS:UNDH:4790 Position
  * SIOC:UNDH:MP11:HEARTBEAT Watchdog

MpsConfiguration-R2-196

Logic 2021-11-16-a
-------------
* Fix SXRSS Mode Logic Code -> if{} if{} changed to if{} else if{}

MpsConfiguration-R2-195

Logic 2021-09-23-a
-------------
* TDUNDB mitigated to 10 Hz

MpsConfiguration-R2-194

Logic 2021-09-21-b
-------------
* Update SXRSS Mode to include SLIT mode
* Chance SXRSS Watchdog logic to affect BYKIKS instead of Hard Line mitigation devices

MpsConfiguration-R2-193

Config 2021-09-21-a
-------------
* Fxi channel mapping of inputs from SXRSS MpsSupport

Logic 2021-09-21-a
-------------
* No logic changes

MpsConfiguration-R2-192

Config 2021-09-20-c
-------------
No Config Change

Logic 2021-09-20-c
-------------
Add in SXRSS Mode

MpsConfiguration-R2-191

Config 2021-09-20-b
-------------
* Fix SXR Guardian and CBLM channels from HXR Link Nodes to SXR Link Nodes

Logic 2021-09-20-b
-------------
* Logic for SXR Guardian and CBLM watchdog faults

MpsConfiguration-R2-190

Config 2021-09-20-a
-------------
* Remove PICM_ESA0_1_HV signal - it is flakey physically and no logic behind it

Logic 2021-09-20-a
-------------
* New logic for the configuration

MpsConfiguration-R2-189

Config 2021-09-19-a
-------------
* Remove all CBLM Alive faults and replace with 2 summary faults - actual watchdog is handled in MpsSupport now
* Remove all CBLM RMON faults and replace with 2 summary faults - actual math is handled in MpsSupport now
* Revive SXRSS inputs and logic and update for new beamline
* Add 8 additional inputs to LN 216 for PCDS


Logic 2021-09-19-a
-------------
* Replace CBLM ALIVE and RMON faults with summary faults
* Add back SXRSS logic
* Add logic for 2 CRIX fast faults from LN 216

MpsConfiguration-R2-188

Logic 2021-06-29-b
-------------
* Same as previous but 30 Hz TDUNDB

MpsConfiguration-R2-187

Config 2021-06-29-a
-------------
* No config changes

Logic 2021-06-29-a
-------------
* Fix misconfiguration so that RIX vacuum fast fault points to RIX Vacuum input instead of RIX motion input

MpsConfiguration-R2-186

Logic 2021-04-30-b
-------------
* Change TDUNDB In to 10 Hz rate limit

MpsConfiguration-R2-185

Config 2021-04-30-a
-------------
* Move BPMS_1990_Y input to different link node
* Add input to LN195 for IN20 laser heater power PV reading

Logic 2021-04-30-a
-------------
* No new logic yet.  IN20 Power Meter will come later

MpsConfiguration-R2-184

Logic 2021-04-27-b
-------------
* Remove logic for BLM/PIC Watchdoe Downstream of TDUND.  No PIC / BLM link nodes exist downstream of TDUND anymore.

MpsConfiguration-R2-183

Logic 2021-04-27-a
-------------
* RFBHX35 and RFBHX36
  * Add all UNDH HXR ignore devices which were missing for these 2 pieces of logic
* VVMG UNDH 1498, 1798,2838, and 2844
  * Remove GUNH mitigation from these 4 truth tables to make these valves consistent with all other VVMG in UNDH area
* SLSXS1 Position
  * Change state 0 to Broken and state 3 to Moving.  This is opposite of other "profile monitor"-like devices, but the in-vacuum switches of these slits works slightly differently.  Also, the interface box between the in-vacuum switches and the MPS requires AC power.  If AC power is lost, both switches go to "0", so the state should read Broken.  It is also verified that in the "Moving" state, both switches read high.

MpsConfiguration-R2-182

Logic 2021-04-26-a
-------------
* Fix bug from previous version where HXRSS Modes were 1, 2, 3 instead of 0, 1, 2.  Do not use previous version.

MpsConfiguration-R2-181

Config 2021-04-24-a
-------------
Readd inputs for HXRSS with correct UNDH and position (girder 28) names:
* VVMG UNDH 2838
* VVMG UNDH 2844
* Crystal In encoder position
* crystal out limit switch
* crystal valid state
* BEND DMPH 400 BRANGE
* BEND UNDH 2810 ON/OFF and INTOL

Logic 2021-04-24-a
-------------
Add 6 pieces of logic for HXRSS:
1.  VVMG UNDH 2838 Position
2.  VVMG UNDH 2844 Position
3.  HXRSS Mode (code)
4.  HXRSS Crystal Position
5.  HXRSS Cryatal Encoder Valid State
6.  HXRSS Magnet ON/OFF

MpsConfiguration-R2-180

MpsConfiguration-R2-179

Logic 2021-03-25-b
-------------
* ALternate logic with TDUNDB Position limited to 30 Hz.

MpsConfiguration-R2-178

Config 2021-03-25-a
-------------
Remove inputs from LN125 and LN196 - these are SC only and do not need to be part of LCLS1



Logic 2021-03-25-a
-------------
Remove logic for inputs from LN125 and LN196

MpsConfiguration-R2-177

Config 2021-03-23-a
-------------
Move soft inputs around to better handle LCLS2

Logic 2021-03-23-a
-------------
No new logic - just same logic with new input channels

MpsConfiguration-R2-176

Config 2021-03-18-a
-------------
* Add HXR HOMS Fast Fault to link node 145 card 3 channel 4 per PCDS

Logic 2021-03-18-a
-------------
* Add logic for XRT HOMS Fast Fault 1, fault at BYKIK

MpsConfiguration-R2-175

Logic 2021-03-02-b
-------------
TDUNDB IN Position limit SXR to 10 Hz

MpsConfiguration-R2-174

Config 2021-03-02-a
-------------
Add VVMG LTUS 505 to link node 205

Logic 2021-03-02-a
-------------
Activate logic for VVMG LTUS 505 and VVMG LTUS 656

MpsConfiguration-R2-173

Logic 2021-02-24-b
-------------
Change TDUNDB IN logic to reduce rate to 30 Hz instead of 10.

MpsConfiguration-R2-172

Config 2021-02-24-a
-------------
* Add MR1K1 Is Out signal in photon area


Logic 2021-02-24-a
-------------
* Change RIX logic to use new MR1K1 OUT ignore logic
    * Applies to RIX Vacuum, MC, and Optics Faults

MpsConfiguration-R2-171

Logic 2021-01-27-b
-------------
TDUNDB IN mitigates BYKIKS to 10 Hz

MpsConfiguration-R2-170

Logic 2021-01-27-a
-------------
Change TDUNDB to mitigate at BYKIKS to 30 Hz.

MpsConfiguration-R2-169

Config 2021-01-11-a
-------------
* Add link processor inputs for SXR and HXR wire scanner mode

Logic 2021-01-11-a
-------------
* Add logic to monitor power on TDUNDB when it is IN
* Add 2 logic tables to handle 10 Hz vs 30 Hz at TDUNDB IN depending on Wire Scanner mode setting 

MpsConfiguration-R2-168

Config 2020-12-11-a
-------------
* Add inputs OUT / IN for:
SXRSS M1
SXRSS M2
SXRSS M3
SXRSS SLIT
SXRSS BOD10
SXRSS BOD12
into SXR ATCA link nodes

* Move TDUND Flow Switch input from LN34 to LN141

* General cleanup and deletion of devices that are no longer in system

Logic 2020-12-11-a
-------------
* Add temporary logic for all SXRSS insertable devices so that beam is inhibited if device is not OUT.  Keep this until system is commissioned


MpsConfiguration-R2-167

Config 2020-12-10-a
-------------
* Add SW inputs for BPMS UNDH 1305, 1390, 1490, 1690, 1790, and 1890
* Change name of VVMG UNDH 1698 to VVMG UNDH 1798

Logic 2020-12-10-a
-------------
* Add standard RFBHX logic for RFBHX12, 13, 14, 16, 17, and 18
* Re-enable logic for VVMG UNDH 1498 and VVMG UNDH 1798

MpsConfiguration-R2-166

Logic 2020-12-01-b
-------------
TDUNDB Position limits to 10 Hz

MpsConfiguration-R2-165

Config 2020-12-01-a
-------------
* Change name of MPLN_FEES_1_RIXOPTFASTFLT to
  MPLN_FEES_1_RIXVACFASTFLT
* Change name of MPLN_FEES_2_RIXOPTFASTFLT to
  MPLN_FEES_1_RIXOPTFASTFLT

Logic 2020-12-01-a
-------------
* Add logic for MPLN_FEES_1_RIXVACFASTFLT
                MPLN_FEES_1_RIXOPTFASTFLT
                MPLN_FEES_1_RIXMCFASTFLT

MpsConfiguration-R2-164

MpsConfiguration-R2-163

Logic 2020-11-30-b
-------------
TDUNDB Position IN = 30 Hz rate limit at BYKIKS

MpsConfiguration-R2-162

Logic 2020-11-30-a
-------------
Change name of ignore logic ST1K4 to ST3K4 per PCDS.

MpsConfiguration-R2-161

MpsConfiguration-R2-160

Logic 2020-11-12-b
-------------
TDUNDB in at 10 Hz

MpsConfiguration-R2-159

Config 2020-11-12-a
-------------
* New device names for FEES stopper IN positions which will be used for Ignore Devices ST1K4, MR1K1, and ST1K2

Logic 2020-11-12-a
-------------
* Add ignore devices ST1K4 Is In,
                     MR1K1 Is In,
                     ST1K2 Is In
* ST1K4 IN	    MR1K1 IN	    ST1K2 IN
TMO Fast Shutter Fault 2 (Vacuum FFO 4)	RIX Motion Fast Fault 1 (no-fault)	RIX Motion Fast Fault 2 (no-fault)
TMO Vacuum Fast Fault 2	TMO Vacuum Fast Fault 1	RIX Vacuum Fast Fault 1 (no-fault)
TMO Motion Fast Fault 1	TMO Vacuum Fast Fault 2	
TMO Motion Fast Fault 2	TMO Motion Fast Fault 1	
	TMO Motion Fast Fault 2	
	TMO Fast Shutter Fault 1 (Vacuum FFO 3)	
	TMO Fast Shutter Fault 2 (Vacuum FFO 4)	

MpsConfiguration-R2-158

Logic 2020-11-09-b
-------------
* TDUNDB Position In limit SXR to 30 Hz

MpsConfiguration-R2-157

Config 2020-11-09-a
-------------
* Remove IOC_UNDH)BP02_MPSSTAT
* Remove GDET_FEE1_CAL_OK
* Remove HYDRECM1, 2, HTEXCH2 per T. Smith.

Logic 2020-11-09-a
-------------
Logic associated with removed inputs is also deletec.

MpsConfiguration-R2-156

Logic 2020-10-26-b
-------------
* Change TDUNDB Position IN logic to rate limit SXR to 10 Hz

MpsConfiguration-R2-155

Config 2020-10-26-a
-------------
* Add faults for RFBHX19 and RFBHX20
* Rename VVPG_UNDH_1998 to VVPG_UNDH_2098

Logic 2020-10-26-a
-------------
* Add logic for RFBHX19 and RFBHX20
* Change name of VVPG UNDH 1998 to VVPG UNDH 2098 and set to active

MpsConfiguration-R2-154

Logic 2020-10-23-a
-------------
* Change logic to allow 30 Hz to TDUNDB

MpsConfiguration-R2-153

Config 2020-10-16-a
-------------
* Change name of VVPG:UNDH:2198 to VVPG:UNDH:2298
* Add RFBHX15, 22, and 23 X and Y inputs for HXR BPM orbit faults

Logic 2020-10-16-a
-------------
* Add logic for VVPM:UNDH:2298
* Add logic for RFBHX15, 22, and 23
* Change verbiage of HXR and SXR Arbiter faults to PMPS Rate Limit

MpsConfiguration-R2-152

Logic 2020-10-08-a
-------------
* Add logic for TMO Fast Shutter Fault 1 and 2

MpsConfiguration-R2-151

Logic 2020-10-06-b
-------------
* TDUNGB In to 10 Hz

MpsConfiguration-R2-150

Config 2020-10-06-a
-------------
* Change BX31 and BX31B to BYD and BYDB (BEND DMPH/S 400)

Logic 2020-10-06-a
-------------
* Logic for changes to magnet names
* TDUNDB at 30 Hz

MpsConfiguration-R2-149

Logic 2020-10-03-b
-------------
* TDUNDB Position 10 Hz when TDUNDB Is In

MpsConfiguration-R2-148

Config 2020-10-03-a
-------------
* Add VVPG DMPS 355 Vacuum Valve for XLEAP-S
* Add RFBHX18 X and Y PV inputs for girder 18

Logic 2020-10-03-a
-------------
* Add logic for new devices
* Change TDUNDB Position to 30 Hz when TDUNDB Is In
* Change PIC Raw CHarge Thresholds: LTUH 420, 452, 480, 722 to mitigate only at BYKIK

MpsConfiguration-R2-147

Config 2020-09-23-a
-------------
No config changes

Logic 2020-09-23-a
-------------
* Add ignore logic to BKRCUS Current and BRCUSDC Current such that they are ignored when the other is on

MpsConfiguration-R2-146

Logic 2020-09-08-d
-------------
* No logic for MPS / Timing agreement
* TDUNDB 10 Hz

MpsConfiguration-R2-145

Logic 2020-09-08-c
-------------
* TDUNDB Position 30 Hz
* No logic that matters for Timing / Mps Ageement

MpsConfiguration-R2-144

Logic 2020-09-08-b
-------------
* Include EVG / MPS agree logic, TDUNDB Position 30 Hz limit

MpsConfiguration-R2-143

Config 2020-09-08-a
-------------
No changes - new LP version

Logic 2020-09-08-a
-------------
No Changes - new LP version

MpsConfiguration-R2-142

Config 2020-09-06-a
-------------
* Add Latching LP fault to check that no BC1 beam comes out when BRCUSDC is ON LP_BC_MODE_BC1
* Add Latching LP fault to check timing and MPS destinations agree LP_DESTINATION_MATCH

Logic 2020-09-06-a
-------------
* Add logic to fault beam if either condition in config is met.

MpsConfiguration-R2-141

Config 2020-09-03-a
-------------
* remove RFBSX51 and RFBHX51 orbit inputs
* Add xleap in / out inputs
* Add 2vacuum valves for SXRSS
* Add SXRSS and HXRSS chincane on / off inputs

Logic 2020-09-03-a
-------------
* Add logic for vac valves
* add logic for xleap positions

MpsConfiguration-R2-140

Logic 2020-08-28-b
-------------
* TDUNDB Position to 10 Hz

MpsConfiguration-R2-139

Logic 2020-08-28-a
-------------
* Move RFBHX35 and RFBHX36 from SXR logic to HXR logic - copy mistake problem.
* Remove gun mitigation for TDUND and TDUNDB positions
* TDUNDB Position 30 Hz limit

MpsConfiguration-R2-138

Logic 2020-08-24-b
-------------
* Remove GMD and XGMD until PMPS is ready
* TDUNDB to 10 Hz

MpsConfiguration-R2-137

Logic 2020-08-24-a
-------------
* Remove GMD and XGMD logic until PMPS is ready
* TDUND Position 30 Hz

MpsConfiguration-R2-136

Logic 2020-08-22-b
-------------
*TDUNDB Position regulates to 10 Hz

MpsConfiguration-R2-135

Logic 2020-08-22-a
-------------
* Remove "Destination SXR / Destination HXR" Ignore logig from all undulator BLM faults
* TDUNDB Position rate limits to 30 Hz

MpsConfiguration-R2-134

Logic 2020-08-19-b
-------------
* New mitigation strategy where everything downstream of fast abort kickers aborts only at kickers
* TDUNDB Position regulates to 10 Hz at BYKIKS

MpsConfiguration-R2-133

Config 2020-08-19-a
-------------
* Rearrange some RF BPM input channels per add_devices.json
* Add TREF and TDES inputs for each kicker (BYKIK, BYKIKS, BKRCUS)

Logic 2020-08-19-a
-------------
* Change Mitigation Strategy so that everything downstream of fast abort kicker aborts only at fast abort kicker
* TDUNDB Position regulates to 30 Hz at BYKIKS
* Add necessary logic based on BPM inputs that were removed and re-added at new channels
* Add TDES and TREF faults for all three kickers to monitor timing

MpsConfiguration-R2-132

Logic 2020-08-07-c
-------------
* Move TDUNDB head to 10 Hz limit.

MpsConfiguration-R2-131

Config 2020-08-07-b
-------------
Set all Magnet current faults to latching

Logic 2020-08-07-b
-------------
Set TDUNDB to 30 Hz at BYKIKS

MpsConfiguration-R2-130

Logic 2020-08-07-a
-------------
* Fix RFBPM SXR faults 16, 19, 51 for real.
* move the head for TDUNDB Position to 10 Hz from 30 Hz

MpsConfiguration-R2-129

Logic 2020-08-06-b
-------------
* Change TDUNDB to 30 Hz rate limit.

MpsConfiguration-R2-128

Config 2020-08-06-a
-------------
NoNo config changes. 

Logic 2020-08-06-a
-------------
Add logic for CLTS magnets BKRCUS, BLRCUS, BRCUSDC, BRCUS1 currents.
Change BYKIK logic to look like BYKIKS logic - no more in link processor

MpsConfiguration-R2-127

Config 2020-08-05-a
-------------
Add VVPG:CLTS:685:POSITION to LN27 Card 1 Channel 8

Logic 2020-08-05-a
-------------
Add logic for VVPG CLTS 685 POSITION STATE

MpsConfiguration-R2-126

Config 2020-07-31-c
-------------
Ran out of disk space the first time.  trying again

Logic 2020-07-31-c
-------------
ran out of disk space the first time.  trying again.

MpsConfiguration-R2-125

Config 2020-07-31-b
-------------
Remove CXI:DG4:VGC:01 Gast Valve open and closed

Logic 2020-07-31-b
-------------
Remove CXI DG4 VGC Gate Valve Position

MpsConfiguration-R2-124

Config 2020-07-31-a
-------------
* remove BPM SXR watchdogs
* Add BPM SXR orbit SW inputs
* Rename some badly named FEES inputs.

Logic 2020-07-31-a
-------------
* Add logic for SXR BPM orbit
* Rename some badly named FEE logic

MpsConfiguration-R2-123

Logic 2020-07-25-b
-------------
Remove BLMS48 Threshold I0 HXR fault missed in previous version

MpsConfiguration-R2-122

Config 2020-07-25-a
-------------
No config changes

Logic 2020-07-25-a
-------------
* Fix SH2 PPS Stopper Logic so no rate limit when In
* Remove BLMS HXR faults - not needed

MpsConfiguration-R2-121

Config 2020-07-24-a
-------------
* Remove BPM heartbeat watchdogs
* Add PVs for X and Y UND orbits in LN 127, 129, 130


Logic 2020-07-24-a
-------------
* Add logic for Soft BPM orbit faults
* Change name of ignore logic for ST1 to ST1L0
* Add logic fo SH2 Position
* Change name of FEE summary faults to make it more clear
* Remove BLMH SXR faults

MpsConfiguration-R2-120

Logic 2020-07-09-d
-------------
Try one more time to figure out how to do CVS.  This is hopefully for real sending 30 hx past BYKIK when TDUND is in

MpsConfiguration-R2-121

Logic 2020-07-09-c
-------------
Ignore 2020-07-09-b.  This one changes TDUND to 30 Hz allowed past BYKIK

Logic 2020-07-09-b
-------------
Allow 30 Hz past BYKIK

MpsConfiguration-R2-119

Config 2020-07-09-a
-------------
Change BLRCUS PIC (PICM:CLTS:280) LOSSL and LOSSH faults to be latching

Logic 2020-07-09-a
-------------
Change ignore conditions for BCS PIC in DMP (DMP997 and DMP998) to not be ignored when split beam stoppers are in.  These devices are common to HXR and SXR.

MpsConfiguration-R2-118

Config 2020-07-02-a
-------------
Change BPMS_UNDH_2190_ORBIT to a latching fault

Logic 2020-07-02-a
-------------
No logic changes

MpsConfiguration-R2-117

Config 2020-06-30-a
-------------
Move BPM 2190 to card 5 channel 5
Remove VVPG DMPH/S 424 - this is handled by PCDS

Logic 2020-06-30-a
-------------
Move BPM 2190 to card 5 channel 5
Remove VVPG DMPH/S 424 - this is handled by PCDS

MpsConfiguration-R2-116

Config 2020-06-29-a
-------------
Release a version for TDUND proper mitigation after releasing the 30 Hz version

Logic 2020-06-29-a
-------------
Release a version for TDUND proper mitigation after releasing the 30 Hz version

MpsConfiguration-R2-115

Config 2020-06-27-b
-------------
This is a temporary version that allows beam to TDUND past BYKIK of 30 Hz for low charge commissioning only.

Logic 2020-06-27-b
-------------
This is a temporary version that allows beam to TDUND past BYKIK of 30 Hz for low charge commissioning only.

MpsConfiguration-R2-114

Config 2020-06-27-a
-------------
No config changes

Logic 2020-06-27-a
-------------
Change TDUND Position to mitigate 10 Hz from BYKIK only, not the gun because of the gun / mps dropouts.

MpsConfiguration-R2-113

Config 2020-06-26-b
-------------
Change TDUND Position to be 10 Hz rate limit at gun HXR and BYKIK

Logic 2020-06-26-b
-------------
Change TDUND Position to be 10 Hz rate limit at gun HXR and BYKIK

MpsConfiguration-R2-112

Config 2020-06-26-a
-------------
No config changes.  This is a version that temporarily allows operations to send 30 Hz to TDUND.  It is only to be used for commissioning, and only with strict administrative controls on the charge.

Logic 2020-06-26-a
-------------
No config changes.  This is a version that temporarily allows operations to send 30 Hz to TDUND with logic "TDUND Position".  It is only to be used for commissioning, and only with strict administrative controls on the charge.

MpsConfiguration-R2-111

Config 2020-06-20-a
-------------
Fix up config and logic for beam to TDUND:
* Remove SIOC:LTUH:MP01, MP02, and MP04 heartbeats.  Not needed for LCLS1 MPS
* Move dechirper THz mirror from LN134 to LN132.


Logic 2020-06-20-a
-------------
Fix up config and logic for beam to TDUND:
* Change the name of VVPG LTUH 102 to VVPG LTUH 100

MpsConfiguration-R2-110

Config 2020-06-14-a
-------------
Move SIOC BSYS MP01, MP02, and MP03 from LN203 (doesn't exist) to correct LN 199.

Logic 2020-06-14-a
-------------
* Fix logic for all SBST Ready - input was off by one for all logic tables i.e Sub Booster 21 logic looked at input from SBST22
* Add logic for sioc bsys mp01, mp02, mp03 watchdogs now that they are in correct link nodes
* remove logic for slit 10/30 and hydrogen recombiner as they no longer exist


MpsConfiguration-R2-109

Config 2020-06-09-a
-------------
No Changes to Config

Logic 2020-06-09-a
-------------
Fix mechanical shutter bootstrapping problem.  When the shutter was removed, the shutter position logic tried to put it back in again.  The shutter needs to be not affected by its position logic.  only linac permits and bykik permits are affected.

MpsConfiguration-R2-108

Config 2020-06-08-a
-------------
No Changed to Config

Logic 2020-06-08-a
-------------
Fix truth table for Gun RF Peak Power Fault which is reversed - 0 is good and 1 is bad.

MpsConfiguration-R2-107

Config 2020-06-01-a
-------------
Correct Channel assignments for HXR Fast Fault (x2) and HXR Spare in LN 145
Add SXR FEE inputs per PCDS input sheet to LN 216

Logic 2020-06-01-a
-------------
Add logic associated with SXR FEE inputs in LN216
Add logic back for HXR FEE fast faults (x2) in LN145

MpsConfiguration-R2-106

Config 2020-05-22-b
-------------
* Remove BYKIK_WD LP EPICS Input
* Change BEND:DMP1 to BEND:DMPH for 4 EPICS PV LP Faults

Logic 2020-05-22-b
-------------
* Remove BYKIK_WD LP EPICS Input
* Change BEND:DMP1 to BEND:DMPH for 4 EPICS PV LP Faults

MpsConfiguration-R2-105

Config 2020-05-22-a
-------------
SIOC:LTUH:MP03:HEARTBEAT, MP04m MP05, and MP06 were mistakenly added to the wrong link nodes.  MP03 and MP04 are now in LN132 card 2 ch 9 and 10, and MP05 MP06 are added to LN134 card 2 ch 9 and 10.

Logic 2020-05-22-a
-------------
Modify logic to support LTUH MP03, MP04, MP05, and MP06 now being at the correct input channels in configuration.

MpsConfiguration-R2-104

Config 2020-05-21-a
-------------
Change EPICS PV Inputs of type QUAD:LTU1 to QUAD:LTUH.  Change associated device name as well

Logic 2020-05-21-a
-------------
Change EPICS PV Inputs of type QUAD:LTU1 to QUAD:LTUH.  Change associated device name as well

MpsConfiguration-R2-103

Config 2020-05-04-a
-------------
Add LP faults LP_BYKIK_OK and LP_BYKIKS_OK
Make both faults latching

Logic 2020-05-04-a
-------------
Add Logic entries for LP_BYKIK_OK and LP_BYKIKS_OK
Add truth table for BYKIK Current that is associated with LP_BYKIK_OK, but no truth table added yet for BYKIKS Current.

MpsConfiguration-R2-102

Config 2020-04-30-a
-------------
* Add Inputs for UND BPM Orbits
* Add Inputs for MPS and BPM Heartbeat watchdogs
* Add Inputs for CBLM alive watchdog
* Add Inputs for CBLM HV status
* All added inputs are set to latch when faulted 

Logic 2020-04-30-a
-------------
* Add Logic to support new inputs.  All inputs are single input.  All either are 120 Hz or 0 Hz permits.

MpsConfiguration-R2-101

Config 2020-03-24-a
-------------
Remove:
SXR_GMD_VGC_01_OPN_DI_POSITION
SXR_GMD_VGC_01_CLS_DI_POSITION

Logic 2020-03-24-a
-------------
Logic associated with these inputs is gone:
SXR_GMD_VGC_01_OPN_DI_POSITION
SXR_GMD_VGC_01_CLS_DI_POSITION

MpsConfiguration-R2-100

Config 2020-03-23-b
-------------
The mps_config_gui, for whatever reason, set the autorecoverable flag to true for each new device that was added to the database.  For most inputs, this is fine.  For the undulator beam loss monitors, these faults need to latch.  A script in version1-0-12 interacts with the database and sets these CBLM faults to not autorecover.

Logic 2020-03-23-b
-------------
No new logic.

MpsConfiguration-R2-99

Config 2020-03-23-a
-------------
No new configuration.  Logic changes for ATCA link node inputs in PCDS.

Logic 2020-03-23-a
-------------
Add locig for HXR Arbiter and HXR PCDS Fast Faults.

MpsConfiguration-R2-98

Config 2020-03-20-b
-------------
For LN145, FEEH.  Remove placeholder signals and put in correct signals from Alex Wallace / PCDS.  Logic to come in next MpsConfiguration version

Logic 2020-03-20-b
-------------
No new logic in this version.  New logic to support FEEH configuration in next version

MpsConfiguration-R2-97

Config 2020-03-20-a
-------------
No new config.  Just keeping in sync with logic.

This release should complete the pcds changes for legacy link nodes.

Logic 2020-03-20-a
-------------
Add Logic for XPP_SB2_VGC_04_OPN_DI and new PPS stoppers ST1L0 and ST1L1

MpsConfiguration-R2-96

Config 2020-03-19-b
-------------
Incremental change for PCDS.  Remove Stoppers from LN38.  LN38 is now completely gone.

Logic 2020-03-19-b
-------------
Incremental Change for LCDS.  Move Stopper SH1 Is In input 0 to STPR_FEE1_ST1_IN_POSITION using logic editor.

MpsConfiguration-R2-95

Config 2020-03-19-a
-------------
Incremental Change - Remove PCDS Devices from LN38 and LN39 per Alex Wallace.  Remove Ignore Logic no longer used.

Logic 2020-03-19-a
-------------
Incremental Change - Remove PCDS Devices from LN38 and LN39 per Alex Wallace.  Remove Ignore Logic no longer used.

MpsConfiguration-R2-94

Config 2020-03-18-a
-------------
There was a bug beginning with version 2020-01-27-a that corrupted the database.  This release captures everything that was done in 2020-01-27-a, 2020-03-12-a, and 2020-02-26-a.  The database is not corrputed.


Logic 2020-03-18-a
-------------
There was a bug beginning with version 2020-01-27-a that corrupted the database.  This release captures everything that was done in 2020-01-27-a, 2020-03-12-a, and 2020-02-26-a.  The database is not corrputed.

MpsConfiguration-R2-93

Config 2020-03-12-a
-------------
Add XTCAV Manual (Pneumatic) Valve VVPG:DMPH:355 to Link Node 141
Add Dechirper THz Mirror In/Out switches to LN 134

Logic 2020-03-12-a
-------------
Add HXR Vac logic for XTCAV Manual (Pneumatic) Valve VVPG:DMPH:355 to Link Node 141
Add HXR Stopper logic for Dechirper THz Mirror In/Out switches to LN 134

MpsConfiguration-R2-92

Config 2020-02-26-a
-------------
Remove 
VVPG_LTUH_999_POSITION:
STPR_BSYS_891_TEMP:
STPR_BSYS_897_TEMP:
VVMG_LTUS_505_POSITION:


Logic 2020-02-26-a
-------------
Make inactive:
"VVFS SLTH 130 POSITION" 0
"VVPG SLTH 115 POSITION" 0
"VVPG SLTH 291 POSITION" 0
"VVPG UNDH 1998 POSITION" 0
"VVPG UNDH 2198 POSITION" 0
VVMG UNDH 1498 POSITION" 0
VVMG UNDH 1698 POSITION" 0
VVMG UNDH 2838 POSITION" 0
"VVMG UNDH 2843 POSITION" 0
"VVFS SLTS 130 POSITION" 0
VVPG SLTS 115 POSITION" 0
VVPG SLTS 581 POSITION" 0
VVMG LTUS 656 POSITION" 0
Devices to be installed during upcomming PAMMs

Change STCLTS In limit from 10 Hz to 120 Hz

Change MCC E-stop button to fault ALL mitigation devices

MpsConfiguration-R2-91

Config 2020-01-27-a
-------------
No changes to configuration.  Tag this to keep consistency

Logic 2020-01-27-a
-------------
*Change linac logic to make BYKIKS mirror behavior for BYKIK.
*Change some HXR device logic, especially downstream PICs, to mirror new HXR behavior - kill at Gun HXR and not trip the shutter so delivery can still happen to SXR
*Set PCAP1-4 collimator thresholds and flowswitch to inactive

*See attached text files for complete list of what was done.

MpsConfiguration-R2-90

Config 2020-01-03-b
-------------
Add PICM:CLTS:280 at BLRCUS to LN42

Logic 2020-01-03-b
-------------
Add logic for PICM:CLTS:280 at BLRCUS

MpsConfiguration-R2-89

Config 2020-01-03-a
-------------
Remove DUMP_LTU1_970_TDUND_IN and DUMP_LTU1_970_TDUND_OUT as these inputs, associated with TDUND, are now into a new LCLS2 link node and are no londer needed.

Logic 2020-01-03-a
-------------
Add much new logic associated with the new link nodes and the new LCLS2 SXR and HXR beamlines.  Please see the json patch files for a list of all the pieces of logic that were added.  This will serve as the foundation of the system checkout that will be conducted prior to operation.

MpsConfiguration-R2-88

Config 2020-01-02-h
-------------
No config changes, but skip ahead a few letters to get congif back in sync with algorithm

Logic 2020-01-02-h
-------------
Add ignore devices needed for new SXR beamline
Change input for existing ignore devices TDUND and D2

Logic 2020-01-02-g
-------------
Still trying to fix issue where database gets corrupted after using logic editor to set pieces of logic to inactive.  What has been done here is a new script in version1-0-11 called mpslogicsetactive.py is used to set the active state of logic to 0 writing to the db directly.  Hopefully this fixes the problem.

Logic 2020-01-02-f
-------------
Still having trouble deactivating 2 pieces of logic.  Base of this version is 2020-01-02-c

Config 2020-01-02-e
-------------
There was an error in the logic sql database for version 2020-01-02-d.  This version uses 2020-01-02-c as input in an attempt to fix the problem

Logic 2020-01-02-e
-------------
There was an error in the logic sql database for version 2020-01-02-d.  This version uses 2020-01-02-c as input in an attempt to fix the problem

MpsConfiguration-R2-87

Config 2020-01-02-d
-------------
No Config Changes

Logic 2020-01-02-d
-------------
Deactivate logic that is temporarily not needed per LCLS2 upgrade.  These logic will come back once devices are re-established.

MpsConfiguration-R2-86

Config 2020-01-02-c
-------------
Rename devices that are to stay after the addition of new LCLS2 beamlines

Logic 2020-01-02-c
-------------
Logic changes associated with renaming certain devices that remain after LCLS2 upgrade

MpsConfiguration-R2-85

Config 2020-01-02-b
-------------
Delete devices from legacy link nodes that have either been moved to new ATCA link nodes to share with LCLS2 or are no longer needed due to changes in the beamline.

Logic 2020-01-02-b
-------------
Logic changes after deleting devices from legacy link nodes.

MpsConfiguration-R2-84

Config 2020-01-02-a
-------------
Add devices to config for new link nodes with correct PV names and correct inputs.  Please ignore and do not use the previous version of MPS configuration, R2-83

Logic 2020-01-02-a
-------------
No new logic.  Support new configuration for new link nodes.

MpsConfiguration-R2-83

Config 2019-12-02-a
-------------
In this version, I add all the inputs to support the SXR beamlines, but I have not yet removed the un-needed inputs from the old link nodes.  This is initially for testing and commissioning purposes.  No logic has been added yet.

Logic 2019-12-02-a
-------------
In this version, I add all the inputs to support the SXR beamlines, but I have not yet removed the un-needed inputs from the old link nodes.  This is initially for testing and commissioning purposes.  No logic has been added yet.
MpsConfiguration-R2-82

Logic 2019-11-12-a
-------------
* New device LP_BKRCUS_FIRE

Config 2019-11-12-a
-------------
*New LP fault LP_BKRCUS_FIRE

Logic 2019-04-17-a
-------------
* New scripts version1-0-10:
  Add 1 Hz rate option to mpslogicpatch.py
* New truth tables:
      MPS Beam Permit: Gun RF HXR
      MPS Beam Permit: Gun RF SXR
      MPS Beam Permit: BYKIKS
      Rate Request: Gun RF HXR 1 Hz
      Rate Request: Gun RF HXR 10 Hz
      Rate Request: Gun RF HXR 30 Hz
      Rate Request: Gun RF HXR 60 Hz
      Rate Request: Gun RF HXR Burst
      Rate Request: Gun RF HXR Single Shot
      Rate Request: Gun RF SXR 1 Hz
      Rate Request: Gun RF SXR 10 Hz
      Rate Request: Gun RF SXR 30 Hz
      Rate Request: Gun RF SXR 60 Hz
      Rate Request: Gun RF SXR Burst
      Rate Request: Gun RF SXR Single Shot
      Rate Request: BYKIKS 1 Hz
      Rate Request: BYKIKS 10 Hz
      Rate Request: BYKIKS 30 Hz
      Rate Request: BYKIKS 60 Hz
      Rate Request: BYKIKS Burst
      Rate Request: BYKIKS Single Shot
      Beam Destination: HXR
      Beam Destination: SXR  

Logic 2019-04-16-a
-------------
* New LP internal faults
(did not successfully add to logic
in last version)
      ALLOWS_BEAM_BYKIKS
      ALLOWS_BEAM_GUN_HXR
      ALLOWS_BEAM_GUN_SXR
      MAX_RATE_BYKIKS_10_HZ
      MAX_RATE_BYKIKS_1_HZ
      MAX_RATE_BYKIKS_30_HZ
      MAX_RATE_BYKIKS_60_HZ
      MAX_RATE_BYKIKS_BURST
      MAX_RATE_BYKIKS_SINGLE_SHOT
      MAX_RATE_GUN_HXR_10_HZ
      MAX_RATE_GUN_HXR_1_HZ
      MAX_RATE_GUN_HXR_30_HZ
      MAX_RATE_GUN_HXR_60_HZ
      MAX_RATE_GUN_HXR_BURST
      MAX_RATE_GUN_HXR_SINGLE_SHOT
      MAX_RATE_GUN_SXR_10_HZ
      MAX_RATE_GUN_SXR_1_HZ
      MAX_RATE_GUN_SXR_30_HZ
      MAX_RATE_GUN_SXR_60_HZ
      MAX_RATE_GUN_SXR_BURST
      MAX_RATE_GUN_SXR_SINGLE_SHOT
      DESTINATION_HXR
      DESTINATION_SXR



Config 2019-03-19-a
-------------
* Use new version:
    scripts/version1-0-9
* New LP internal faults
      ALLOWS_BEAM_BYKIKS
      ALLOWS_BEAM_GUN_HXR
      ALLOWS_BEAM_GUN_SXR
      MAX_RATE_BYKIKS_10_HZ
      MAX_RATE_BYKIKS_1_HZ
      MAX_RATE_BYKIKS_30_HZ
      MAX_RATE_BYKIKS_60_HZ
      MAX_RATE_BYKIKS_BURST
      MAX_RATE_BYKIKS_SINGLE_SHOT
      MAX_RATE_GUN_HXR_10_HZ
      MAX_RATE_GUN_HXR_1_HZ
      MAX_RATE_GUN_HXR_30_HZ
      MAX_RATE_GUN_HXR_60_HZ
      MAX_RATE_GUN_HXR_BURST
      MAX_RATE_GUN_HXR_SINGLE_SHOT
      MAX_RATE_GUN_SXR_10_HZ
      MAX_RATE_GUN_SXR_1_HZ
      MAX_RATE_GUN_SXR_30_HZ
      MAX_RATE_GUN_SXR_60_HZ
      MAX_RATE_GUN_SXR_BURST
      MAX_RATE_GUN_SXR_SINGLE_SHOT
      DESTINATION_HXR
      DESTINATION_SXR


Logic 2019-03-19-a
-------------
* Use new version:
    scripts/version1-0-9
* New LP internal faults
      ALLOWS_BEAM_BYKIKS
      ALLOWS_BEAM_GUN_HXR
      ALLOWS_BEAM_GUN_SXR
      MAX_RATE_BYKIKS_10_HZ
      MAX_RATE_BYKIKS_1_HZ
      MAX_RATE_BYKIKS_30_HZ
      MAX_RATE_BYKIKS_60_HZ
      MAX_RATE_BYKIKS_BURST
      MAX_RATE_BYKIKS_SINGLE_SHOT
      MAX_RATE_GUN_HXR_10_HZ
      MAX_RATE_GUN_HXR_1_HZ
      MAX_RATE_GUN_HXR_30_HZ
      MAX_RATE_GUN_HXR_60_HZ
      MAX_RATE_GUN_HXR_BURST
      MAX_RATE_GUN_HXR_SINGLE_SHOT
      MAX_RATE_GUN_SXR_10_HZ
      MAX_RATE_GUN_SXR_1_HZ
      MAX_RATE_GUN_SXR_30_HZ
      MAX_RATE_GUN_SXR_60_HZ
      MAX_RATE_GUN_SXR_BURST
      MAX_RATE_GUN_SXR_SINGLE_SHOT
      DESTINATION_HXR
      DESTINATION_SXR


Logic 2019-03-18-b
-------------
* Use new version:
    scripts/version1-0-8
* Update mitigation device name:
    Pockels Cell to Gun Linac (PC to GUNL)
    *except* in places that affect LP code

Config 2019-03-18-a
-------------
* Use new version:
    scripts/version1-0-7

Logic 2019-03-18-a
-------------
* Use new versions:
    mps-R1-1-1-branch-clts-R0-0
    scripts/version1-0-7
    algorithmCommon/version1-0-3
* Add new mitigation devices
    Gun HXR
    Gun SXR
    BYKIKS
  and add these for each macro state with
  rate of 'Ignore'

MpsConfigurationMR-R2-81

MpsConfiguration-R2-80

Config 2018-09-25-a
-------------
* New inputs for LTU Vertical Dechirper 
  downstream mirror 
    MIRR_LTU1_548_OUT_LIMSW
    MIRR_LTU1_548_IN_LIMSW

Logic 2018-09-25-a
-------------
* New truth table
  LTU Dechirper - MIRR LTU1 548 Position (MIRDVDHCP)

MpsConfiguration-R2-79

Logic 2018-08-28-a
-------------
* Remove XLEAP Wiggler - Downstream End Vertical Gap Too Small
         XLEAP Wiggler - Upstream End Vertical Gap Too Small
* Remove ignore logic XCS Is Not In Main Line
  Affected truth tables: 
	 XCS SB1 VGC 01 Gate Valve Position
	 XCS SB1 VGC 02 Gate Valve Position
	 XCS SB2 VGC 01 Gate Valve Position
	 XCS SB1 Diagnostic Stopper Position

MpsConfiguration-R2-78

Logic 2018-03-21-a
-------------
* Set OTR30 truth tables inactive:
  OTR30 LTU1 449 Position
  OTR30 LTU1 449 Position When TDUND Not In

NOTE: Do not use MpsConfiguration-R2-77


MpsConfiguration-R2-77

MpsConfiguration-R2-76

Config 2018-03-02-a
-------------
* Remove MFX_LENS_1_SAFE

Logic 2018-03-02-a
-------------
* Remove MFX Beam Focusing Interlock (Beryllium Lens)

MpsConfiguration-R2-75

Config 2017-12-13-a
-------------
* Change all PIC/BLM loss and test inputs to be non-autorecoverable
  (latching). Most already had this setting, but a small
  number had been misconfigured. 
* Delete all rate-based PIC/BLM loss inputs. These were
  intended for rate-recovery, whose prospects are currently
  unknown and these input state changes flood the log.

Logic 2017-12-13-a
-------------
* XLEAP MIRXL - MIRR LTU1 829 Position:
  Make 3 mm position allowed (change rate from 0 -> 120 Hz)

MpsConfiguration-R2-74

Config 2017-10-17-a
-------------
* Add A-line secondary target IN/OUT status

Logic 2017-10-17-a
-------------
* Set 'Main Manifold Gauge: LI30 Station 9' Inactive
* Set 'XCS Gate Valve Summary - XRT Periscope Line' Inactive
* Rename FEE camera 852 and 913 logic to be more accurate


MpsConfiguration-R2-73

Config 2017-07-24-a
-------------
* New input XCS:PBT:VGC_OUT_SUM

Logic 2017-07-24-a
-------------
* New truth table
  XCS Gate Valve Summary - XRT Persicope Line

MpsConfiguration-R2-72

Config 2017-06-19-a
-------------
* Swap XLEAP mirror 3mm and 5mm position
  inputs (they are currently reversed).


Logic 2017-06-19-a
-------------
* Swap XLEAP mirror 3mm and 5mm position
  inputs (they are currently reversed).


MpsConfiguration-R2-71

Logic 2017-06-08-b
-------------
* Rename M3H to XRT-M2 in logic truth 
  table names and state names
* XRT-M2 (aka M3H) no longer has valid
  in position; deactivated related logic
* FEE camera 852 and 913 FEE PLC interlock
  logic now does photon transmission check;
  updated truth table names and state names
  accordingly
* Updated truth table names for A-line kickers
  now that kickers have been re-named as part
  of BSY Reconfiguration. (LN inputs still
  need rename eventually.)

Config 2017-06-08-a
-------------
* New inputs for XLEAP wiggler gap
  and insertable devices


Logic 2017-06-08-a
-------------
* New logic for XLEAP wiggler gap
  and insertable devices

Config 2017-05-24-a
-------------
* Remove obsolete inputs:
    THZR_DMP1_350_OUT_LIMIT
    THZR_DMP1_350_IN_LIMIT

Logic 2017-05-24-a
-------------
* Remove obsolete truth tables:
    THz Radiator Beryllium Foil
    FEE Camera 1561 Position

MpsConfiguration-R2-70

Config 2017-05-22-a
-------------
* Add inputs for XLEAP LTU Beam Loss Fiber

Logic 2017-05-22-a
-------------
* Add logic for XLEAP LTU Beam Loss Fiber

Logic 2017-05-18-h
-------------
* Add D2 as ignore device for 
  PIC Trigger Missed (LN31)

Logic 2017-05-18-g
-------------
* Add YAG01, YAG02, TD11 as ignore devices
  for Linac PIC truth tables

Logic 2017-05-18-f
-------------
* Add TD11 as ignore device for Linac 
  truth tables downstream of TD11

Logic 2017-05-18-e
-------------
* Reinstate TDUND as an ignore
  device for some end-of-LTU BLMs.
  (It was removed in 2017-05-18-a.)
  See changes.log for more details.

Logic 2017-05-18-d
-------------
* Add missing ignore devices for
  PIC Trigger Missed (LN25)
  BCS PIC RAW Charge Threshold DMP 997
  BCS PIC RAW Charge Threshold DMP 998

Logic 2017-05-18-c
-------------
* Add missing D2 ignore device
  to more LTU truth tables.

Logic 2017-05-18-b
-------------
* More ignore logic cleanup. Add D2
  as ignore device for injector OTRs
  when 'TDUND Not In'

Logic 2017-05-18-a
-------------
* Fix: Remove TDUND as ignore condition
  for many LTU truth tables. Unclear why
  it was in the list originally.

Logic 2017-05-17-a
-------------
* Add D2 Stopper Summary In as ignore condition
  for many LTU, UND, DMP truth tables.
* Add TD11 as ignore condition for 
  VVMG LTU1 505 Position  

MpsConfiguration-R2-69

Logic 2017-05-16-a
-------------
* Allow 120 Hz beam when D2 is IN

MpsConfiguration-R2-68

Config 2017-05-13-a
-------------
* Remove OTR22 inputs:
    OTRS_LI25_342_OUT_LMTSW
    OTRS_LI25_342_IN_LMTSW
* For 2017 FEE reconfiguration, many changes.
    See changes.log and supporting files for details.


Logic 2017-05-13-a
-------------
* Remove OTR22 truth tables:
    OTR22 Position
    OTR22 Position When TDUND Not In
* For 2017 FEE reconfiguration, many changes.
    See changes.log and supporting files for details.


MpsConfiguration-R2-67

Config 2017-05-10-b
-------------
* New A-line valve VVPG_BSYA_340_OPEN_LIMSW
* Remove long-obsolete devices:
   DEV_52SL1
   DEV_50B1
   DEV_50PR3OUT
   HVPS_BSY0_54_POWER  
* Remove inputs not needed for BSY Reconfiguration:
   TRGT_BSYA_960_OUT_LIMSW
   TRGT_BSYA_960_IN_LIMSW
   TRGT_BSYA_960_FLOW_SW
   TRGT_BSYA_960_KLIXON
   COLL_BSYH_479_FLOW_SW
   COLL_BSYH_487_FLOW_SW
   COLL_BSYH_495_FLOW_SW
   COLL_BSYH_520_FLOW_SW

Logic 2017-05-10-b
-------------
* Logic for new A-line valve:
  VVPG BSYA 340 Position
* Remove inactive obsolete logic
  DEV 50PR3 Position
* Per K. Jobe, remove logic associated
  with A-line copper target:
    A-Line Secondary Target Position
    A-Line Secondary Target Flow Switch
    A-Line Secondary Target Klixon
    A-Line Secondary Target Is Out

Logic 2017-05-10-a
-------------
* Remove references to obsolete FEE Spoiler SP0
  and Stoppers ST1/ST2:
  - Remove truth tables:
      Spoiler SP0 DMP1 765 Position
      Stopper: ST1/ST2 Position
  - Remove ignore logic:
      Spoiler SP0 Is In
      ST1/ST2 Are In


MpsConfiguration-R2-66

Config 2017-04-28-a
-------------
* Replace individual PCAPM flow switches
  with single switch for PCAPM1-4
* Changed PIC channel assignments for
  PCAPM1-4 PICs
* Remove unused constantly cycling PIC inputs
  for new BSYH PICs. Note will need
  to be re-added to implement rate recovery!

Logic 2017-04-28-a
-------------
* Remove:
  PIC Raw Charge Thresholds: BSYH 520 PCBSYH/A
  Flowswitch: COLL BSYH 520 (PCBSYH/A)
  Flowswitch: COLL BSYH 479 (PCAPM1)
  Flowswitch: COLL BSYH 495 (PCAPM3)
  Flowswitch: COLL BSYH 487 (PCAPM2)
* Add:
  Flowswitch: COLL BSYH 479, 487, 495, 503  (PCAPM1-4)

MpsConfiguration-R2-65

Config 2017-04-17-a
-------------
Many changes to support 2017 downtime BSY Reconfiguration of LCLS common-line,
including some A-line related changes. See changes.log and the other supporting
documents for details. 


Logic 2017-04-17-a
-------------
Many changes to support 2017 downtime BSY Reconfiguration of LCLS common-line,
including some A-line related changes. More details can be found in changes.log
and the other supporting documents. 

* Change 'A-Line B1/B2 Is Not On AND A-Line Kicker Is Not Enabled' 
    to 'A-Line Kicker Is Not Enabled'
* Change 'BSY GLAST Target' to 'A-Line Secondary Target'
    (target now in A-line; no longer in common-line)
* Add new truth tables:
    Flowswitch: COLL BSYH 479 (PCAPM1)
    Flowswitch: COLL BSYH 487 (PCAPM2)
    Flowswitch: COLL BSYH 495 (PCAPM3)
    Flowswitch: COLL BSYH 503 (PCAPM4)
    Flowswitch: COLL BSYH 520 (PCBSYH/A)
    PIC Raw Charge Thresholds: BSYH 479 (PCAPM1)
    PIC Raw Charge Thresholds: BSYH 487 (PCAPM2)
    PIC Raw Charge Thresholds: BSYH 495 (PCAPM3)
    PIC Raw Charge Thresholds: BSYH 503 (PCAPM4)
    PIC Raw Charge Thresholds: BSYH 520 PCBSYH/A
    PIC Raw Charge Thresholds: BSYH 762 PC90
    PIC Raw Charge Thresholds: BSYH 836 PC119
    Temperature RTD Summary: BSY Common Line
    VVFS CLTH 101 Position
    VVPG BSYH 470 Position
    VVPG BSYH 541 Position
    VVPG BSYH 837 Position
    VVPG CLTH 178 Position
    VVPG CLTH 375 Position
* Remove obsolete truth tables
    PIC Raw Charge Thresholds: BSY0 16
    PIC Raw Charge Thresholds: BSY0 33
    PIC Raw Charge Thresholds: BSY0 45
    PIC Raw Charge Thresholds: BSY0 59
    PIC Raw Charge Thresholds: BSY0 78A
    PIC Raw Charge Thresholds: BSY0 78B
    DPS Temperature LI30
    Fast Shutter FV2A LI30 Position
    Fast Shutter FV2 LI30 Position
    VVPG BSY0 IV2 Position
    VVPG BSY0 IV3 Position
    VVPG BSY0 IV4 Position
    Temperature RTD Summary: BSY Common Line Before D2
    Temperature RTD Summary: BSY Common Line Past D2
    Ion Chamber Gas Flowswitch BSY A
    Ion Chamber Gas Flowswitch BSY B
    Ion Chamber Gas Flowswitch BSY C
    Flowswitch: BSY PC320
    Flowswitch: BSY PC90
    Flowswitch: COLL BSY0 16 (50PC20)
    Flowswitch: COLL BSY0 33 (50PC30)
    Flowswitch: COLL BSY0 45 (50PC-45)
    Flowswitch: COLL BSY0 59 (PC0119)
    Flowswitch: COLL BSY0 65 (PC0145)
    Flowswitch: COLL BSY0 67 (PC0155)
    Flowswitch: COLL BSY0 69 (PC0165)
    Flowswitch: COLL BSY0 71 (PC0175)
    Flowswitch: COLL BSY0 73 (PC0185)
    Flowswitch: COLL BSY0 75 (PC0195)


MpsConfiguration-R2-64

Logic 2016-11-09-a
-------------
* Remove 'MFX Gate Valves Not All Open - PLC Summary Status' 
* Rename 'Toroid Comparator Dogleg (IM02 vs IM03)'
  to 'Toroid Comparator Dogleg 1 (IM02 vs IM03)'


MpsConfiguration-R2-63

Logic 2016-11-03-a
-------------
* Modify titles of toroid comparator truth table 
  names for clarity

Logic 2016-10-20-a
-------------
* Add ignore condition 'BSY GLAST Target Is Out'
* Modify 'BSY GLAST Target Klixon' and 'BSY GLAST Target Flow Switch'
  to use above ignore condition instead of using the target
  position in the actual truth table

Config 2016-10-19-a
-------------
* Delete obsolete device inputs:
  Dump B4C
  BSY PR45
  BSY PR55


Logic 2016-10-19-a
-------------
* Delete obsolete and inactive logic:
    Profile Monitor BSY0 55

MpsConfiguration-R2-62

Logic 2016-10-18-a
-------------
* Remove truth tables:
  Profile Monitor BSY0 45 Position When D2 or TDUND Not In
  Profile Monitor BSY0 45 Position

Logic 2016-10-17-a
-------------
* New MFX interlocks
* Add new analog link node inputs (not yet used in logic)

Config 2016-10-17-a
-------------
* Add new MFX inputs. 
  See changes.log and *diff*.html files for details

MpsConfiguration-R2-61

Logic 2016-08-25-a
-------------
* Build against database 2016-08-25-a in order to test analog
  link node inputs. No logic changes.


Config 2016-08-25-a
-------------
* Add new Analog Link Node 44 and first set of inputs
  See changes.log for details

MpsConfiguration-R2-60

Logic 2016-05-10-a
-------------
* Again, minor change to state names for these truth tables:
  FEE Spectrometer Crystal - Beam Energy Too Low When Crystal Not Out
  FEE Spectrometer Crystal - Pulse Energy Too High When Crystal Not Out 
  Gas Detector Problem When FEE Spectrometer Crystal Not Out

Config 2016-05-02-a
-------------
* Remove unused and obsolete device
   TIUKEYSW aka TIU:IN20:1:KEY_SWITCH_STATE


Logic 2016-05-02-a
-------------
* Remove unused and obsolete device
   TIUKEYSW aka TIU:IN20:1:KEY_SWITCH_STATE
* Rename Spoiler: SP0 DMP1 765 Position to Spoiler SP0 DMP1 765 Position



MpsConfiguration-R2-59

Logic 2016-04-29-a
-------------
* Minor change to state names for these truth tables:
  FEE Spectrometer Crystal - Beam Energy Too Low When Crystal Not Out
  FEE Spectrometer Crystal - Pulse Energy Too High When Crystal Not Out 
  Gas Detector Problem When FEE Spectrometer Crystal Not Out
MpsConfiguration-R2-58

Config 2016-04-26-a
-------------
* Delete obsolete dechirper devices
   DCHP_LTU1_545_WDOG_SUM
   DCHP_LTU1_545_BPM_INTOL

* New devices for FEE spectrometer crystal protection 
  XTAL_FEE1_441_PULSEENERGY, LN10, Card 4, Ch 3
  GDET_FEE1_1_CAL_OK, LN10 Card 4, Ch 4

Logic 2016-04-26-a
-------------
* New truth tables for FEE spectrometer crystal protection
  FEE Spectrometer Crystal - Pulse Energy Too High When Crystal Not Out
  Gas Detector Problem When FEE Spectrometer Crystal Not Out
Logic 2016-04-24-a
-------------
* No logic changes. Modify Makfile to use scripts/version1-0-6

Config 2016-04-24-a
-------------
* No config changes. Modify Makfile.conf to use scripts/version1-0-6

MpsConfiguration-R2-57
Logic 2016-03-01-a
-------------
* "FEE Solid Attenuators - Gas Pressure Interlock": allow SATTs 3 and 4 
  to be IN

Logic 2016-02-26-a
-------------
* Remove obsolete inputs and associated logic - should not affect algorithm

Logic 2016-02-25-a
-------------
* Remove obsolete inputs and associated logic - should not affect algorithm

Logic 2016-02-24-a
-------------
* Remove Dechirper BPM interlocks
* Remove dangling unused database objects - should not affect algorithm

MpsConfiguration-R2-56
Logic 2016-02-12-a
-------------
* Update LTU Horizontal Dechirper Gap truth table now that
  we have 2 independent gap switches

MpsConfiguration-R2-55
Logic 2016-01-22-b
-------------
Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out

Logic 2016-01-22-a - BASED ON 2015-12-17-a
-------------
Rename some inputs to match their PV names. See changes.log
for details.

Config 2016-01-22-a
-------------
* Rename some input names to match their PV names. 
  See changes.log for details.


MpsConfiguration-R2-54
Config 2015-12-07-b
-------------
* Removed unused PV attributes from database.
  For some External PV objects, fill in missing Device Details
  fields. See changes.log for details.

Config 2015-12-07-a
-------------
* Removed unused devicedetails and fault objects from database:

Devicedetails:
THZR LTU1 741 IN_LIMSW
MIRR FEE1 1560 OUT_LIMIT1 (two of these)
MIRR FEE1 1560 OUT_LIMIT2 (two of these)
XTAL FEE1 441 OUT_LIMSW

Faults:
'SPARE'
'02B'
'02A'
'Valve is open'
'A-line Kicker Pulser1': PULSER1_ON, PULSER1_OFF, PULSER1_TRIG_ENB, PULSER1_TRIG_LOCK
'A-line Kicker Pulser2': PULSER2_ON, PULSER2_OFF, PULSER2_TRIG_ENB, PULSER2_TRIG_LOCK
'SL10 CLOSED'
'ST22 OUT'
'THZ-2 Foil Out Switch'
'THZ-2 Foil In Switch'
'FEE spectrometer crystal OUT'

Config 2015-12-01-a
-------------
* Removed duplicate device instances:
  MIRR_FEE1_1560_OUT_LIMIT1 (2 duplicates)
  MIRR_FEE1_1560_OUT_LIMIT2 (2 duplicates)
  XTAL_FEE1_441_OUT_LIMSW (1 duplicate)

Config 2015-11-30-a
-------------
* Remove duplicate PvArea LTU1 from database. 
  Changed all devices that used the deleted instance
  to use the other instance. See changes.log for list
  of affected devices.
* Remove duplicate PvDeviceType BFW from database. 
  Changed all devices that used the deleted instance
  to use the other instance. See changes.log for list
  of affected devices.

Config 2015-11-23-a
-------------
* Remove unused devices:
  FLOOD_SW_OK
  TARGET_EPV_FLOSW_2_OK
  AMO_HFP_MPA_02ASPARE
  MTLM_LOGIC_OK
  STOPPER_2_IN_OUT
  STOPPER_1_IN_OUT
  AMO_HFP_MPA_02BSPARE
  RAD_SHLD_FLOSW_9_OK

* Remove unused LN channels
  LN 40 Card 1 Channel 10
  LN 40 Card 1 Channel 11
  LN 40 Card 2 Channel 9
  LN 40 Card 2 Channel 10
  LN 40 Card 2 Channel 11
  LN 40 Card 3 Channel 11
  LN 42 Card 2 Channel 4
  LN 42 Card 2 Channel 6
  LN 42 Card 3 Channel 8

Logic 2015-12-17-b
-------------
Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out

Logic 2015-12-17-a - BASED ON 2015-11-09-a
-------------
* Remove unused duplicate truth table
* Fix XRT S5 state names (Moving and Broken were swapped)
* Update LTU Vertical Dechirper Gap truth table now that
  we have 2 independent gap switches


MpsConfiguration-R2-53
Config 2015-11-09-a
-------------
* Add MEC_DV4_VGC_01_OPN_DI
* Misc LN 39-41 rename and delete
  for photon-side inputs. Details
  in directory.

Logic 2015-11-09-b
-------------
Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out

Logic 2015-11-09-a - BASED ON 2015-10-10-a
-------------
* Remove photon logic:
          HXX:HXM:VGC:01 Gate Valve Position
          HXX:HXM:VGC:02 Gate Valve Position
          HXX:HXM:VGC:03 Gate Valve Position
          XRT HXRAY MXT Isolation Valve HXX-MXT-VGC-01
          NEH AMO Focusing Optics Entrance Gate Valve KBO-VGC-01
          NEH AMO Focusing Optics Exit Gate Valve KBO-VGC-02
          NEH AMO LAMP Gate Valve VGC 30 Position
          NEH AMO LAMP Gate Valve VGC 30 Is In Beam
          NEH AMO LAMP Gate Valve VGC 30 Is Out of Beam
* Add photon logic:
          NEH AMO Valves Ok for Beam - Summary From PLC
          MEC BXL VGC 01 Gate Valve Position
          XRT HXRAY MXT Gate Valve HXX:MXT:VGC:01
          XRT HXRAY MXT Gate Valve HXX:MXT:VGC:02
          XRT HXRAY MXT Gate Valve HXX:MXT:VGC:03
          XRT HXRAY MXT Gate Valve HXX:MXT:VGC:05
* Add ignore devices to  TDUND Position
* Remove B4C Position
* Remove Temperature RTD Summary: North Arc

MpsConfiguration-R2-52
Logic 2015-10-10-b
-------------
Remove LTU Dechirper - 10 Hz Rate Limit if Dechirper Not Out

Logic 2015-10-10-a
-------------
Remove LTU Dechirper - Undulators Must Be Out If Dechirper Not Out

Logic 2015-10-09-a - BASED ON 2015-09-08-a
-------------
Add MEC DV4 VCG 01 Gate Valve Position
Use database version 2015-10-09-a

Config 2015-10-09-a
-------------
* Add MEC_DV4_VGC_01_OPN_DI

MpsConfiguration-R2-51
Logic 2015-09-08-z: NON-LINEAR LOGIC
-------------
This is a version to be used ONLY for LTU Dechirper commissioning.
It is based on 2015-09-04-a with these changes:
* Add commissioning Dechirper logic:
  LTU Dechirper Commissioning - BPM 550 Watchdog
  LTU Dechirper Commissioning - BPM 550 X/Y Position
  LTU Dechirper Commissioning - TDUND Must Be In

Logic 2015-09-08-a
-------------
* Add production Dechirper logic:
  LTU Dechirper - Undulators Must Be Out If Dechirper In
  LTU Dechirper - 10 Hz Raw Limit if Jaws Not Out
  LTU Dechirper - BPM 550 Watchdog
  LTU Dechirper - BPM 550 X/Y Position
  LTU Dechirper - Horizontal Gap Too Small
  LTU Dechirper - Vertical Gap Too Small
  Ignore device: LTU Dechirper Is Out

Logic 2015-09-04-a
-------------
* Add truth table "MFX Gate Valves Not All Open - PLC Summary Status"

Logic 2015-09-03-a
-------------
* Add truth table "VVFV IN20 785 Position"
* Add Dechirper BLF truth tables:
    "BLM Heartbeat: Dechirper LTU1 BLF545"  
    "BLM Pedestal Thresholds: Dechirper LTU1 BLF545"
    "BLM Raw Charge Thresholds: Dechirper LTU1 BLF545"
* Set "XPP CS-PAD 1 Detector Damage Fault" inactive

Config 2015-09-03-a
-------------
* Add Dechirper inputs:
    BLM:LTU1:BLF545:LOSS_60_L
    BLM:LTU1:BLF545:LOSS_60_H
    BLM:LTU1:BLF545:TEST_L   
    BLM:LTU1:BLF545:TEST_H   
    BLM:LTU1:BLF545:TEST_1_L
    BLM:LTU1:BLF545:TEST_1_H
    BLM:LTU1:BLF545:PED_L    
    BLM:LTU1:BLF545:PED_H
* Add new IN20 fast valve:
    VVFV:LI20:785:OPEN_LMTSW
* Add new MFX hutch vacuum valve PLC summary:
    MFX_MPS_PLC_VAC_OK

MpsConfiguration-R2-50
Logic 2015-07-13-b
-------------
* Explicity add inputs for is-code logic (those that were missing)
  to support MPS GUI improvements
* Update logic for CXI:SC3:VGC:01. See changelog for details.

MpsConfiguration-R2-49
Logic 2015-07-13-a
-------------
* Add new truth table for CXI gate valve: 
    "CXI:SC3:VGC:01 Gate Valve Position"
* Modify BC1 toroid comparator state names to reflect new threshold

Config 2015-07-13-a
-------------
* Add Dechirper inputs:
    DCHP_LTU1_545_BPM_INTOL_THRESHOLD
    DCHP_LTU1_545_GAP_LIMSW_NEGZ_POSITION
    DCHP_LTU1_545_GAP_LIMSW_POSZ_POSITION
    DCHP_LTU1_545_OUT_LIMSW_NEGY_POSITION
    DCHP_LTU1_545_OUT_LIMSW_POSY_POSITION
    DCHP_LTU1_545_WDOG_SUM_STATE
    DCHP_LTU1_555_GAP_LIMSW_NEGZ_POSITION
    DCHP_LTU1_555_GAP_LIMSW_POSZ_POSITION
    DCHP_LTU1_555_OUT_LIMSW_NEGX_POSITION
    DCHP_LTU1_555_OUT_LIMSW_POSX_POSITION
    USEG_UND1_1_ALL_OUT_STATE
* Add new CXI gate valve open limit switch:
    CXI_SC3_VGC_01_OPN_DI_POSITION

MpsConfiguration-R2-48
Logic 2015-05-18-a
-------------
* Add new truth table FEE Solid Attenuators - Gas Pressure Interlock
* Modify ignore device lists for: 
    HXR - Beam Energy Too Low With M1S Out
    FEE Spectrometer Crystal - Beam Energy Too Low When Crystal Not Out
Config 2015-05-18-a
-------------
* Add FEE Gas attenuator pressure threshold interlock
  to LN38: VMPS:FEE1:E202:NOGAS

MpsConfiguration-R2-47
Logic 2015-05-04-a
-------------
* Add new devices: LN42 trigger; LTU dechirper BLF
* Add truth table PIC Trigger Missed (LN42)
* Remove duplicate truth table Mirror BL21 Position 
* Per CATER request, add MAD names to OTR/YAG truth tables.
  Then, to be consistent, add unit numbers to other OTR/YAG
  truth tables

Config 2015-05-01-a
-------------
* Add LTU Dechirper Beam Loss Fiber channel
  to LN30: BLM:LTU1:BLF545

Config 2015-04-22-a
-------------
* Add PIC LN 42 trigger input status, fault:
  PICM_BSYA_2061_NO_TRIG_MISSED

MpsConfiguration-R2-46 
Logic 2015-03-04-a
-------------
* Add TD11 Position truth table to fault moving/broken state

Logic 2015-03-02-c
-------------
* Remove BX01/BX02 and BXG from ignore device lists
  for truth tables also ignored by TD11
* Remove duplicate Flowswitch: COLL BSYA 1015 (PC10)
* Rename BSY GLAST Target to BSY GLAST Target Position
* Remove duplicate Linac slow and fast valves

Logic 2015-03-02-b
-------------
* Rename TIU, flow switch, IMPS Heartbeat, Pockels Cell
  truth tables for clarity and consistency

Logic 2015-03-02-a
-------------
* Remove duplicate truth tables:
  TIU: DPS Temperature
  TIU: Fast Shutter 2 Position: LI30
  TIU: Fast Shutter 2A Position: LI30
  YG BL241 Position
  YG BL351 Position
* Change TIU:MCC Emergency Radiation Stopper
  to be always evaluated (never ignored)
* Add D2 as ignore device for HXRSS logic

MpsConfiguration-R2-45
Logic 2015-01-07-b
-------------
* NOTE: this version is a pseudo-branch, containing 
  just 2 changes from 2015-01-07-a. 
  Last-minute release to support LCLS MD activities:
    - Ignore 30-9 slow valve if TD11 is IN     

MpsConfiguration-R2-44
Logic 2015-01-07-a
-------------
* Add TDUND flow switch logic
* Reorganize Profile Monitor BSY0 45 logic to 
  take advantage of ignore devices instead of 
  using stopper positions as inputs to logic.
  Set 'Profile Monitor BSY0 45' logic to Not Active
  Add 2 new truth tables: 'Profile Monitor BSY0 45 Position'
  and 'Profile Monitor BSY0 45 Position When D2 or TDUND Not In'
* Fix typo in truth table name. Change 'FEE Spectrometer Crystal - 
  Beam Energy Too Low With Crystal Out' to 'FEE Spectrometer 
  Crystal - Beam Energy Too Low When Crystal Not Out'

MpsConfiguration-R2-43
Logic 2014-12-05-a
-------------
* Add logic to protect
  FEE spectrometer crystal
  from low energy beam

Config 2014-12-05-a
-------------
* Add fault
  XTAL_FEE1_441_ENERGY
* Rename
  XTAL_FEE1_442_OUT_LIMSW
  to
  XTAL_FEE1_441_OUT_LIMSW

MpsConfiguration-R2-42
Config 2014-11-25-a
-------------
* Add faults
  KICK:LTU0:320:ABORTWIN
  KICK:LTU0:320:STANDBYWIN

MpsConfiguration-R2-41
Logic 2014-10-24-a
------------
* Add truth tables
  XPP SB2 VGC 02 Gate Valve Position
  XPP SB2 VGC 03 Gate Valve Position

Config 2014-10-24-a
------------
* Add inputs
  XPP_SB2_VGC_02_OPN_DI_POSITION
  XPP_SB2_VGC_03_OPN_DI_POSITION

MpsConfiguration-R2-40
Logic 2014-10-16-a
------------
* BCS PIC RAW Charge Threshold DMP 997/998: 
  add D2 to ignore list
* OTR21/OTR22 Position:
  add TD11 To ignore list
* OTR30/OTR33 Position:
  add TD11 and D2 to ignore list
Config 2014-10-16-a
------------
* Add FEE Spectrometer Crystal OUT limit switch

MpsConfiguration-R2-39
Logic 2014-10-10-a
------------
* Set 'Stopper: ST1/ST2 Position' to only
be ignored if D2 IN

MpsConfiguration-R2-38
Logic 2014-10-01-a
------------
* Add HXR Beam Energy with M1S Out truth table

MpsConfiguration-R2-37
Logic 2014-09-24-a
------------
* Cleanup of photon logic ignore device lists
  See changes.log for more information

MpsConfiguration-R2-36
Logic 2014-09-23-a
------------
* Add new ignore device SP0 spoiler, add it as
  ignore device to appropriate truth tables

MpsConfiguration-R2-35
Modify for cram and static build
Added to CVS modules as MpsConfiguration
**Note new tag names use capital M, i.e. 
MpsConfiguration, not mpsConfiguration**

mpsConfiguration-R2-34
Logic 2014-07-02-a
------------
* Modify D2 logic to rate-limit beam to 10 Hz 
  (from 120) when D2 is IN
* Update PIC HVPS input names to be consistent
* Add truth tables for missing PIC HVPS inputs: 
  LI20, LI24, BSY
* Fix ignore devices for LI24 BLM/PIC watchdog

Config 2014-07-02-a
------------
* Add missing BSY PIC HVPS inputs: 2-6
* Update input and state names for all PIC HVPS to
  be consistent

mpsConfiguration-R2-33
Logic 2014-06-09-a
------------
* Added logic for DMP SP0 Spoiler Position

Config 2014-06-09-a
------------
* Added IN and OUT limit switches for DMP SP0 spoiler

mpsConfiguration-R2-32
Logic 2014-05-30-a
------------
* Remove photon mirror M3H from lists of ignore devices

mpsConfiguration-R2-31
Logic 2014-05-13-a
------------
* Remove CXI Detector Damage truth tables
* Set B4C Protection of ST1/ST2 inactive
* Update B4C Position
* BSY RTD truth table name cleanup
* Fix incorrect LHS mitigation rate assignment for 
  some non-LHS-related truth tables

mpsConfiguration-R2-30
Logic 2014-03-31-a
------------
* Update CXI valve logic per A. Wallace

mpsConfiguration-R2-29
Logic 2014-03-12-a
------------
* Update CXI Configurations 2 and 7 per A. Wallace

mpsConfiguration-R2-28
Logic 2014-02-28-a
------------
* Changed names and removed channels for CXI.
* Updated CXI configuration summary logic
* Added D2 as Ignore Device for many CXI truth tables

Config 2014-02-28-a
------------
* Changed names and removed devices for CXI

mpsConfiguration-R2-27
Logic 2014-02-26-a
------------
* Update SXRSS Mode logic; remove temporary mode truth tables that
  were created for commissioniNG

mpsConfiguration-R2-26
Logic 2014-02-21-a
------------
* Cleaned up FEE1 M1S Mirror Beam Energy Upper Limit truth table

mpsConfiguration-R2-25
Logic 2014-02-06-a
------------
* No logic changes
* Use database 2014-01-06-a to pick up databaseCommon/version1-0-4,
  which adds channel access security to MPS bypasses

Config 2014-02-06-a
------------
* Use databaseCommon/version1-0-4 to add channel acces
  security to MPS bypasses


mpsConfiguration-R2-24
Logic 2014-01-06-a
------------
* 50PC30, 50PC45, PC0119 - no longer ignore when 
  A-Line B1/B2 Is Not On AND A-Line Kicker Is Not Enabled
  (never should have been the case)
* SXRSS: Add individual truth tables for each insertable device;
  Modify mode logic to take advantage of these new tables

mpsConfiguration-R2-23
Logic 2013-12-17-a
------------
* SXRSS Mode: Seeded Mode: Allow M3 to be either IN or OUT
  (previously required to be IN)

mpsConfiguration-R2-22
Logic 2013-12-02-a
------------
* Modifications to HXR Beam Energy Lower Limit for future use and
  set inactive for now
* Add FEE1 M1S Mirror State to check for inconsistencies
* Add S5B to ignore list for HF4 LAM VGC 01 Gate Valve Position
* Add D2  to ignore list for B4C Protection of ST1/ST2  

mpsConfiguration-R2-21
Logic 2013-11-11-a
------------
* Enable production SXRSS Mode State; 
  disable temporary SXRSS Mode State - Chicane, Slit, and M3 Active

mpsConfiguration-R2-20
Logic 2013-10-28-a
------------
* A-line IV40: Ignore when 'SL10 Closed' or 'B1/B2 Off and
  A-line Kicker not enabled'

mpsConfiguration-R2-19
Config 2013-10-15-a
------------
* Remove AMO_HFP_VGC_02A, AMO_HFP_VGC_02B
* Add AMO_LMP_VGC_30_OPN_DI, AMO_LMP_VGC_30_CLS_DI

Logic 2013-10-15-a
------------
* Changes for next AMO run:
  -Remove NEH AMO Diagnostics Chamber Gate Valve
  -Remove ANEH AMO HFP Beam Stop
  -Remove NEH AMO End Station Ready
  -Remove NEH AMO High Field Physics Chamber Gate Valve Summary
  -Add NEH AMO LAMP VGC 30 Position truth tables

mpsConfiguration-R2-18
Config 2013-10-10-a
------------
* Remove OTRS LTU1 743 OUT/IN LIMITs (PSI profile monitor)
* Add    YAGS LTU1 743 OUT/IN LIMITs (PSI profile monitor)

Logic 2013-10-10-a
------------
* Modify PSI Profile Monitor truth table to use YAGS:LTU1:743 inputs
  instead of OTRS:LTU1:743 inputs; changed truth table name to use 
  YAG instead of OTR

mpsConfiguration-R2-17
Config 2013-10-04-a
------------
* Add OTRS LTU1 743 OUT/IN LIMITs (PSI profile monitor)

Logic 2013-10-04-a
------------
* Add logic for SXRSS with Chicane, Slit, and M3 Active (for M3 test)
* Remove previous M3 standalone logic; not needed
* Add LTU PSI profile monitor logic

mpsConfiguration-R2-16
Logic 2013-09-24-a
------------
* Add logic for BSY GLAST Target Flow Switch
* Add logic for SXRSS M3 (temporary for test of mirror only)
* Modify logic for BSY collimator 65, 67, 69, 71, 73, 75) flow switches
  so that they are not masked by "A-Line B1/B2 Is Not On AND A-Line Kicker Is Not Enabled"
* Revive Inactive BSY GLAST Target Klixon with new logic

Config 2013-09-24-a
------------
* Add BSY GLAST Target Flow Switch

mpsConfiguration-R2-15
Logic 2013-08-28-a
------------
* Modify Ignore Device A-Line B1/B2 Is Not ON and A-Line Kicker Is Not Enabled:
  - Replace power supply ON status with 2 new OFF status inputs from PPS
* Per R. Iverson, modify BSY PR45 logic to require D2 or TDUND to be IN if PR45 IN
* Per R. Iverson, M. Stanek remove SXR lower energy limit

Config 2013-08-28-a
------------
* Add A-line B1/B2 OFF status Chains A and B from PPS

mpsConfiguration-R2-14
Logic 2013-08-02-a
------------
* Add SXRSS logic and devices; remove obsolete e+ devices
* Active SXRSS logic assumes only slit and chicane are installed
* Inactive SXRSS logic added for potential future use:
  - All SXRSS devices installed
  - slit, chicane, M2, M3 installed

Config 2013-08-02-a
------------
* Add SXRSS devices

mpsConfiguration-R2-13
Logic 2013-07-19-a
------------
* Per CATER 109696, add fault if A-line IV26 NOT_OUT
* Add missing state names for B4C protection

mpsConfiguration-R2-12
Logic 2013-07-08-a
------------
* Per Cater 109199, add logic that requires B4C in ST0 to be OUT

* Per J. Turner (see algorithm/2013-07-08-a/changes.log) require
  FEE M1S Mirror to be OUT OR Beam Energy is low enough

Database 2013-07-08-a
---------------
* To support M1S mirror protection (above), add 2 OUT limit switch inputs
  and 'energy OK' input (this repurposes an unused LN11 input 'BC1_CID')

mpsConfiguration-R2-11
Logic 2013-06-15-a
------------
* Per Cater#108919
	Regarding mitigating potential B4C damage while running low energy.  
	In attendance were Rad Physics, Paul Miller, John Arthur, Roger, 
	Jim Turner, and M. Stanek.

	The interim solution for allowing low energy running without a BAS 2 mJ 
	limit was an agreement that we would not allow photons on the ST0 B4C piece 
	at all.  Sayed Rokni accepted that as an interim measure, we would use MPS 
	to ensure this condition.  

 	What is need required:
	If ST1/ST2 = Not OUT,  Zero rate fault the Gun.
 	This fault should have an 'ignore condition' when TDUND is in, 
	D2 is in, TD11 is in, BX01/02 is NOT ON, YAG BL211 is IN, BXG is ON.
	
	Existing B4C ST1_ST2 shall stay in place.



mpsConfiguration-R2-10
Logic 2013-06-13-a
------------
* Change D2 Stopper State Strings. Bit 0 and 1 were reversed. Change does not affect logic only readback status string

mpsConfiguration-R2-09
Database 2013-06-03-a
------------
* Add GLAST Limit Switches 

Logic 2013-06-03-a
------------
* Add Logic for GLAST Target Moving
* Add Logic for VAC Valve BSYA 4005 (IV40)


mpsConfiguration-R2-08
Database 2013-05-27-a
* Add new STPR 60 System (D2, ST60,ST61, BTM60,BTM PPS SOLN CNTL). Signals coming from PPS

Logic 2013-05-27-a
------------
* Add New STPR 60 System C-code logic, all must be IN or OUT. 
	Change Ignore logic status to use new D2 IN bits and
	De-Activate D2 Logic from BCS
* Add TDUND IN to Prof BSY 45 logic per R.Iverson
* De-Activate A-Line LGPS/COR magnets from A-Line logic per R. Iverson and J. Nelson
	- lgps ab01 1010, 1090, 1950, 2050, 2750, 2850, and xcor 2890, 3212, 
	and ycor 2911, 3313.
* De-Activate A-Line GLAST Klixon per R. Iverson and J. Nelson


mpsConfiguration-R2-07
Logic    2012-12-10-a
---------------------
* Changed HXRSS Mode logic per Heinz-Dieter Nuhn:
	- HXRSS bend lints changed from 12.7<E < 14.2 to 10<E <15
	- Changed Seeded Mode definition to require Crystal to be IN
	- Changed Phase Shifter Mode to all HXRSS Bend to be at ANY state


mpsConfiguration-R2-06
Database 2012-11-12-a
Logic    2012-11-12-a
---------------------
* Add THZR:LTU1:741:IN_LMTSW, OUT_LMSW limit switches for new THZ-2 
* removed a spare vacuum valve on LN 31, card 1, ch 9 so that we could add
  these limit switches

mpsConfiguration-R2-05:
Database 2012-10-26-a
Logic    2012-10-26-a
---------------------
* Add new logic to set lower limit of Beam Energy for SXR and HXR per R. Iverson.
	Lower Beam E limit is 3.3GeV

mpsConfiguration-R2-04:
Database 2012-10-15-a
Logic    2012-10-15-a
---------------------
* Add new logic to set lower limit of Beam Energy for Undulator per R. Iverson.
	Lower Beam E limit is 2.3GeV


mpsConfiguration-R2-03:
Logic    2012-09-30-a
---------------------
* Modify logic for SXR:GMD:VGC_01, add S2 Stopper to ignore logic and renamed 
	logic table to include NEH at the beginning like the rest of NEH tables.
* Included upstream beam destinations to BCS PIC/LION inputs per HVS,
	and changed the logic name to BCS PIC/LION Raw Charge Threshold



mpsConfiguration-R2-2:
Database 2012-09-26-a
Logic    2012-09-26-a
---------------------
* Adds new SXR:GMD:VGC_01 support
* this skips database and logic 2012-09-25-a in order to remove the PICMs that
were not needed

mpsConfiguration-R2-1: DO NOT USE
Database 2012-09-25-a
Logic    2012-09-25-a
---------------------
* Adds new PICM:DMP1:380.381 and SXR:GMD:VGC_01 support

mpsConfiguration-R2-00:
Database 2012-09-18-a
Logic    2012-09-18-a
---------------------
* end of downtime 2012 release. Tag for production. Adds new VVPG:DMP1:355
	 and XPP:SH3 support

mpsConfiguration-R1-115:
added file database/2012-08-08-a/AdditionalCode.h, otherwise same as 114 
Database 2012-08-08-a
Logic    2012-08-08-a
---------------------
upgrade to epics-R3-14-12, mps-R1-0-1-branch-R1-2

mpsConfiguration-R1-114:
Database 2012-08-08-a
Logic    2012-08-08-a
---------------------
upgrade to epics-R3-14-12, mps-R1-0-1-branch-R1-2

mpsConfiguration-R1-113:
Logic   2012-06-29-a
------------
* Fixed bug in SL10 IS IN state, state # is 15 (ie 1111) not 4.
* Fixed a bug in HXRSS Mode Logic (is code=True) became false in Logic 2012-06-25-a, 
	Logic 2012-06-25-a should NO Longer be used!!!



mpsConfiguration-R1-112:
Logic   2012-06-25-a
------------
* De-activate some BSYA logic  per R. Iverson and C. hast
* Added PPS STOPPER Inputs
* changes existing PPS logic to use new inputs	
* De-Activated A-Line Profile Monitor Summary logic per R. Iverson 

Config 2012-06-25-a
------------
* Added BSYA PPS Inputs
* removed some BSYA inputs that are now being replaced by the PPS inputs
* removed A-Line Kicker auto recovery for trigger inputs

Logic   2012-06-05-a
------------
* De-activate some BSY PICS in Logic per R. Iverson
	PIC Unit numbers:
	LCLS  SLC 
	65	145	Trips often if PM1 is on-bypassed			
	67	155				
	69	165				
	71	175				
	73	185				
	75	195				
	76	205	

Config 2012-06-05-a
------------
* Clean up names of A-Line devices, desc was too long
	
DESC, "SLIT_BSYA_2010_SL10_CLS_LIMIT" to  blahÉLIM instead of LIMIT 
DESC, "STPR_BSYA_2275_ST22_OUT_LIMIT" to  blahÉLIM

* Remove recovery for A-Line Kicker Rate Inputs so that it doesn't fill up Logs when kicker is at rates less than 120Hz.


mpsConfiguration-R1-110:

Logic   2012-05-21-a
------------
* Changes for CXI and MEC
* Logic for A-Line, removed unused inputs

Config 2012-05-05-a
------------ 
* Set BSYA PICM's to NOT have auto recovery
   


mpsConfiguration-R1-109:

Logic   2012-05-05-a
------------
* de-Activate logic for
	 VVPG:LI21:1:POSITION Per Ted Martinez 
* Logic for A-Line
* Logic MEC
Config 2012-05-05-a
------------ 
* Add BSYA XCOR Power Supply input


mpsConfiguration-R1-108:
Config  2012-04-30-a baed on 2012-03-20-a but fixed PICM channel errors
------------
* Added Link Node 43 for A-Line KICKER (BYKICK TYPE)
* Added inputs for A-Line


mpsConfiguration-R1-107:
Config 2012-04-22-a
------------
* Added Link Node 42 for A-Line PICs along with A-LINE PICMs.

mpsConfiguration-R1-106:
Config 2012-03-20-a
	* Added new CXI Valve
	* Fix Input typos in LNW_BSO and STPR_BSY_88
Logic 2012-03-20-a
	* same logic as 2012-01-06-a but includes the config typo fix
Logic 2012-03-20-b
	* based on 2012-03-20-a and includes new CXI valve logic

mpsConfiguration-R1-105:
Config 2012-01-06-a
	* Added HXRSS HOZ and YAW Home Status
	* Updated for Puleo Status

mpsConfiguration-R1-104:
Added Config: 2012-01-03-a for VVFS:DMP1:107
Added Logic: 2012-01-03-a MEC logic and VVFS:DMP1:107

mpsConfiguration-R1-103:
Added Config: 2011-11-29-a which fixes A-Line Kicker ON/OFF read back strings
Added Logic: 2011-11-29-a and 2011-11-15-b for MEC logic

mpsConfiguration-R1-102:
Add Logic:  2011-11-15-a  and 2011-11-15-b for new CXI and MEC logic, "b" includes logic for HXRSS full installation.
Add Config: 2011-11-15-a for A-Link Kicker Pulser Status, inputs not added to logic input list

mpsConfiguration-R1-101:
Add Logic:  2011-11-07-a  and 2011-11-07-b for HXRSS
Add Config: 2011-11-07-a for MEC and CXI
Logic corrects "BXG is On" 0 bit input error which was set to BEND_IN20_751_OFF, corrected it to be BEND_IN20_231_OFF.

mpsConfiguration-R1-100:
Add Logic:  2011-10-31-a  and 2011-10-31-b for HXRSS
Add Config: 2011-10-31-a for HXRSS

mpsConfiguration-R1-99:
Add Logic:  2011-09-19-a for MEX and XPP

mpsConfiguration-R1-98:
Add Config:  2011-09-12-a per MEC

mpsConfiguration-R1-97:
-- Add Config: 2011-08-26-a to set Detector Pad Faults autorecovery to False 

mpsConfiguration-R1-96:
-- Add Logic: 2011-08-10-a Fixed error in M3H Ignore logic definitions. 

mpsConfiguration-R1-95:
-- Logic: 2011-08-09-a
---- Changes for Mark Arndt in MEC, XPP, and CXI

mpsConfiguration-R1-94:
-- Logic: 2011-08-01-a
---- Added updated BYKICK Readback Logic to ignore when D2 is IN
-- Config: 2011-08-01-a
----Changes for Mark Arndt in Config
	

mpsConfiguration-R1-93:
-- Logic: 2011-07-12-a
-- Config: 2011-07-12-a
-- Changes for CXI per Mark Arndt

mpsConfiguration-R1-92:
-- Logic: 2011-07-05-a
-- Config: 2011-07-05-a
-- Additional ignore devices for UM6; DG2; XCS devices; add new devices for upcoming runs

mpsConfiguration-R1-91:
-- Logic: 2011-06-28-a
-- Config: 2011-06-15-a
-- New XCS logic; remove some obsolete NEH and XCS logic

mpsConfiguration-R1-90:
-- Logic: 2011-06-17-a
-- Config: 2011-06-15-a
-- Fix bug introduced in mpsConfiguration-R1-88 

mpsConfiguration-R1-89: **Bug in this version; DO NOT USE**
-- Logic: 2011-06-16-a
-- Config: 2011-06-15-a
-- Fix bug introduced in mpsConfiguration-R1-88

mpsConfiguration-R1-88: **Bug in this version; DO NOT USE**
-- Logic: 2011-06-15-a
-- Config: 2011-06-15-a
-- Add XPP truth table and ignore condition.
   Add XCS inputs.
   Cleanup: remove obsolete XRT input and CXI logic
            remove obsolete FEE stopper inputs

mpsConfiguration-R1-87:

-Logic 2011-05-31-a
--Add 2 new XPP logic tables

-Logic 2011-05-26-a
-- Add new CXI Logic
-- Add new MEC Logic
-- Add D2 Logic and D2 Ignore Device Logic
-- Change Valve Logic to include D2 and TD11 Ignore Logic per Iverson

-Databse 2011-05-26-a
--Remove Extra B921 ST1_ST2 Inputs that never were used. Real status comes from B950.

-Logic 2011-05-25-a
   *IMPORTANT IMPORTANT IMPORTANT 
	NOTE: reverted back to logic 2010-09-28-a because 
	everything in logic sqlite fails from then till 
	now was malformed. Recreated all logic changes 
	so that logic 2011-02-26-a and 2011-05-25-a 
	are equivalent, but 2011-05-25-a has db issues 
	resolve and extra S5 Position Logic. Added 
	AutoIncroment to sqlite Mpslogic.mpl tables.


mpsConfiguration-R1-86:
-config: 2011-05-11-a
--Add support new inputs and  for CXI
--Add RTD summary past BSY D2 inputs 

mpsConfiguration-R1-85:
-config: 2011-05-04-a
--Add support new inputs and  for CXI
--Add D2 inputs 

mpsConfiguration-R1-84:
-Should not be used

mpsConfiguration-R1-83:
-Logic:  2011-02-26-a
-config: 2011-02-26-a
--Add support for soft input for CXI CS-PAD-Damage Fault and reverted logic back for CXI Configuration 4 Summary.

 
mpsConfiguration-R1-82:
-Logic: 2011-02-25-a
-- Per Mark Arndt and CXI request, temporarily changed CXI MPS CFG 4 CONFID logic from "CXI Configuration 4 Summary" to "CXI CS-PAD-Damage Fault". Changes should be backed out when CXI changes can support a proper protection design. Logic for "CXI Configuration 4 Summary" should revert back to logic 2011-2-2-a when needed.

mpsConfiguration-R1-81:
 -Deactivate logic for BSY Prof PR1_2, 50PR3, and PR2 per Iverson. Added BSY PIC HV per Sony. 

mpsConfiguration-R1-80:
 -Add logic and database "2011-01-08-a" to change PV name of input and sway states. 

mpsConfiguration-R1-79:
 -Add logic 2010-12-06-a (for CXI Config 1-7 and PLC_OK Status logic)

mpsConfiguration-R1-78:
 -Add database 2010-12-01-a for CXI 
 -Add logic 2010-12-01-a for CXI
 - Removed extra HXX:MXT:VGC_01:OPN_DI Position input and removed from logic 

mpsConfiguration-R1-77:
 -Add database 2010-11-29-a for CXI (built from database 2010-09-28-a)
 -Add logic 2010-11-29-a for CXI

mpsConfiguration-R1-76:
 -Add database 2010-11-22-b for CXI (built from database 2010-09-28-a)

mpsConfiguration-R1-75:
 -Add database 2010-11-22-a for CXI

mpsConfiguration-R1-74:
 - Add database 2010-09-28-a (Changed name of TRHZ:DMP1:310 to THZR:DMP1:350)
 - Add logic 2010-09-28-a (same as above)

mpsConfiguration-R1-73:
 - Add database 2010-09-24 (added VVMG-DMP1-743)
 - Add logic 2010-09-24 (added VVMG-DMP1-743, remove BSY Fast Gauges and BSYA B11)

mpsConfiguration-R1-72:
 - Update which CONFIG and LOGIC to build in top level Makefile (should have been 
   included in R1-71)

mpsConfiguration-R1-71:
 - New database and logic 2010-08-30-a. Add NEH AMO End Station Ready; Set NEH2 HXRAY StrongBack 1 Isolation Valve to inactive" 
 - Builds database 2010-08-17a and 2010-08-30-a
 - Builds logic 2010-08-17a and 2010-08-30a

mpsConfiguration-R1-70:
 - New databaseand logic  2010-08-17-a. (added BYKICK watchdog)

mpsConfiguration-R1-69:
 - New database 2010-08-11-a, logic 2010-08-11-a (Add PICM:BSYA:1701A,1701B) 

mpsConfiguration-R1-68:
 - New database 2010-08-10-a 

mpsConfiguration-R1-67:
 - New logic 2010-08-09-a (BSYA devices ignore BYKICK)

mpsConfiguration-R1-66:
- Fixed double BSYA devices
- Added logic for BSYA Prof and BSYA PIC ignore on B1/B2
	
mpsConfiguration-R1-65:
- Added BSYA devices

mpsConfiguration-R1-64:
- Made BSY PIC inputs latching
- Added mpslogic_create_pic_patch.py application

mpsConfiguration-R1-63:
- Corrects CE11 flowswitch input and logic

mpsConfiguration-R1-62:
- Added PIC inputs to LN 25
- Added PIC logic for LN 11, 16, and 22

mpsConfiguration-R1-61:
- Added NO_TRIG inputs to LN 11, 16, and 22

mpsConfiguration-R1-60:
- Removed PIC autorecover

mpsConfiguration-R1-59:
- Removed PICs from LN 23, 25, and 26

mpsConfiguration-R1-58:
 - Corrected Link Node types

mpsConfiguration-R1-57:
 - Added PIC inputs

mpsConfiguration-R1-56:
 - Updated photon section inputs

mpsConfiguration-R1-55:
 - New configurations, 2010-03-23-a, 2010-03-29-a
 - New logic 2010-03-30-a

mpsConfiguration-R1-54:
 - New configuration, 2010-03-16-a

mpsConfiguration-R1-53:
 - Alg common uses mps-R1-0-0

mpsConfiguration-R1-52:
 - New unlatch PVs
 - New algorithm wrapper to use latched values
 - New EDM displays
 - Better Makefiles reduce number of products built
 - Replaced deprecated Python code (os.popen)
 - Split up mpsconfig Python module.  Easier to modify, understand.

mpsConfiguration-R1-51:
 - Updated channel mapping
 - Updated BASII stopper logic to use new channel mapping

mpsConfiguration-R1-50:
 - TIMING_STABLE logic added
 - TIU inputs added to logic

mpsConfiguration-R1-49:
 - TIMING_STABLE input added
 - BPM BYKIK input (27/1/14) is now a latching fault

mpsConfiguration-R1-48:
 - Rate request logic for BYKIK and Pockels Cell
 - Rate requests include burst and single shot modes for BYKIK and Pockels cell

mpsConfiguration-R1-47:
 - Added 1553 logic
 - Added rate request logic and inputs

mpsConfiguration-R1-46:
 - Updated AMO logic
 - Updated MPS configuration

mpsConfiguration-R1-45:
 - Added AMO logic

mpsConfiguration-R1-44:
 - Added AMO inputs and stopper S1 in status

mpsConfiguration-R1-43:
 - Added AMO inputs and stopper S1 in status

mpsConfiguration-R1-42:
 - Added "Phase Two Alpha" FEE and NEH inputs and logic

mpsConfiguration-R1-41:
 - Added PIC/BLM watchdog faults

mpsConfiguration-R1-40:
 - Removed ignore cases from ST1/ST2 B4C protection logic

mpsConfiguration-R1-39:
 - Added B4C/ST1ST2 logic

mpsConfiguration-R1-38:
 - Added FEE logic, moved ST1 ST2 inputs to different card

mpsConfiguration-R1-37:
 - Moved LN 38/4 to 38/3 to match reality

mpsConfiguration-R1-36:
 - Added FEE phase 1 inputs

mpsConfiguration-R1-35:
 - Remapped LTU PIC inputs
 - Removed masking of LTU PICS on TDUND

mpsConfiguration-R1-34:
 - PICM 732 latches
 - Update to EPICS fault latching

mpsConfiguration-R1-33:
 - Better fault numbering

mpsConfiguration-R1-32:
 - Added LN28/29 PICs

mpsConfiguration-R1-31:
 - Bypass recover internal input and logic

mpsConfiguration-R1-30:
 - Moved BFW 1010 In from 33/1/13 to 32/1/12

mpsConfiguration-R1-29:
 - Renamed BFW inputs

mpsConfiguration-R1-28:
 - Removed EPICS BFW inputs

mpsConfiguration-R1-27:
 - Added PIC inputs

mpsConfiguration-R1-26:
 - Moved BFW 1810 and 2610 to non-card-1-chan-13 inputs

mpsConfiguration-R1-25:
 - Pockels Cell AND Gate TT no longer affects LHS
 - Uses hardwired BFW In status

mpsConfiguration-R1-24:
 - Added LN34 no trig input

mpsConfiguration-R1-23:
 - Added LN34 PICs

mpsConfiguration-R1-22:
 - Added BTM summary fault PV

mpsConfiguration-R1-21:
 - Removed many PV faults

mpsConfiguration-R1-20:
 - Added BFW In PV faults

mpsConfiguration-R1-19:
 - Corrected magnet PV names

mpsConfiguration-R1-18:
 - Added magnet PV faults

mpsConfiguration-R1-17:
 - Added OTR 621 logic

mpsConfiguration-R1-16:
 - Added OTR/TDUND logic

mpsConfiguration-R1-15:
 - Added BLM:LTU1:980 to algorithm 2009-04-03-a

mpsConfiguration-R1-14:
 - New algorithms with much more BLM logic

mpsConfiguration-R1-13:
 - Moved VVMG:LTU1:505 from LN29-01-13 to LN29-01-03

mpsConfiguration-R1-12:
 - New algorithm and configuration to handle laser AND gate

mpsConfiguration-R1-11:
 - Added many BLM and BLM HVPS inputs
 - Added new shutter inputs
 - Better documentation export
 - New algorithm wrapper
 - New MPS Logic

mpsConfiguration-R1-10:
 - Added BLM channels for link nodes 30, 32, 33, 35, and 37.
 - Changed LN36's BLM names to match the new channels.
 - Shifted LN10's card 2 channels up by one channel number.
 - Updated database/current to 2009-02-26-a

mpsConfiguration-R1-9:
 - New algorithm export format.  Initializes rates to 120 Hz.

mpsConfiguration-R1-8:
 - New algorithm export format

mpsConfiguration-R1-7:
 - New handwritten algorithm 2009-02-20-c

mpsConfiguration-R1-6:
 - Ignore logic inverted

mpsConfiguration-R1-5:
 - Algorithm fixes laser heater logic

mpsConfiguration-R1-4:
 - Added new DB with four new PV inputs (BP01-BP04)
 - New MPS logic created to use these inputs
 - New SNL output.

mpsConfiguration-R1-3:
 - Removed BFW 110 EPICS channel from config DB.

mpsConfiguration-R1-2:
 - Algorithm 2009-02-18-a modified to remove more EPICS dependencies.

mpsConfiguration-R1-1:
 - Algorithm 2009-02-18-a added.  Removes dependency on EPICSs status.

mpsConfiguration-R1-0:
 - Initial version

