******************************************* **************** Logic Add **************** ******************************************* Device 'WIGG_LTU1_849_GAP_LIMSW_POSZ_TOP_POSITION' added to the logic database. Device 'WIGG_LTU1_849_GAP_LIMSW_POSZ_BOT_POSITION' added to the logic database. Device 'WIGG_LTU1_849_GAP_LIMSW_NEGZ_TOP_POSITION' added to the logic database. Device 'WIGG_LTU1_849_GAP_LIMSW_NEGZ_BOT_POSITION' added to the logic database. Device 'MIRR_LTU1_829_APERTURE_5MM_POSITION' added to the logic database. Device 'MIRR_LTU1_829_OUT_LIMSW_POSITION' added to the logic database. Device 'MIRR_LTU1_829_APERTURE_3MM_POSITION' added to the logic database. Device 'YAGS_LTU1_844_OUT_LIMSW_POSITION' added to the logic database. Device 'YAGS_LTU1_844_IN_LIMSW_POSITION' added to the logic database. Device 'YAGS_LTU1_853_OUT_LIMSW_POSITION' added to the logic database. Device 'YAGS_LTU1_853_IN_LIMSW_POSITION' added to the logic database. Device 'OTRS_LTU1_858_OUT_LIMSW_POSITION' added to the logic database. Device 'OTRS_LTU1_858_IN_LIMSW_POSITION' added to the logic database. ====================================== Adding XLEAP Wiggler - Downstream End Vertical Gap Too Small Added truth table "XLEAP Wiggler - Downstream End Vertical Gap Too Small" (828) Ignored when TD11 Is In Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when Stopper: BSY D2 Summary Is In Input 0: WIGG_LTU1_849_GAP_LIMSW_POSZ_TOP_POSITION Input 1: WIGG_LTU1_849_GAP_LIMSW_POSZ_BOT_POSITION Adding state "Gap too small" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Gap too small (top switch)" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Gap too small (bottom switch)" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Gap ok" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding XLEAP Wiggler - Upstream End Vertical Gap Too Small Added truth table "XLEAP Wiggler - Upstream End Vertical Gap Too Small" (829) Ignored when TD11 Is In Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when Stopper: BSY D2 Summary Is In Input 0: WIGG_LTU1_849_GAP_LIMSW_NEGZ_TOP_POSITION Input 1: WIGG_LTU1_849_GAP_LIMSW_NEGZ_BOT_POSITION Adding state "Gap too small" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Gap too small (top switch)" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Gap too small (bottom switch)" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Gap ok" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding XLEAP PRXL1 - YAGS LTU1 844 Position Added truth table "XLEAP PRXL1 - YAGS LTU1 844 Position" (830) Ignored when TD11 Is In Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when Stopper: BSY D2 Summary Is In Input 0: YAGS_LTU1_844_OUT_LIMSW_POSITION Input 1: YAGS_LTU1_844_IN_LIMSW_POSITION Adding state "Moving" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Out" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "In" Pockels Cell: 10 Mechanical Shutter: 10 BYKIK: 10 Laser Heater Shutter: None Adding state "Broken" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding XLEAP PRXL2 - YAGS LTU1 853 Position Added truth table "XLEAP PRXL2 - YAGS LTU1 853 Position" (831) Ignored when TD11 Is In Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when Stopper: BSY D2 Summary Is In Input 0: YAGS_LTU1_853_OUT_LIMSW_POSITION Input 1: YAGS_LTU1_853_IN_LIMSW_POSITION Adding state "Moving" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Out" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "In" Pockels Cell: 10 Mechanical Shutter: 10 BYKIK: 10 Laser Heater Shutter: None Adding state "Broken" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding XLEAP PRXL3 - OTRS LTU1 858 Position Added truth table "XLEAP PRXL3 - OTRS LTU1 858 Position" (832) Ignored when TD11 Is In Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when Stopper: BSY D2 Summary Is In Input 0: OTRS_LTU1_858_OUT_LIMSW_POSITION Input 1: OTRS_LTU1_858_IN_LIMSW_POSITION Adding state "Moving" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Out" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "In" Pockels Cell: 10 Mechanical Shutter: 10 BYKIK: 10 Laser Heater Shutter: None Adding state "Broken" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding XLEAP PRXL1 - YAGS LTU1 844 Position and TDUND Not In Added truth table "XLEAP PRXL1 - YAGS LTU1 844 Position and TDUND Not In" (833) Ignored when TD11 Is In Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when Stopper: BSY D2 Summary Is In Ignored when TDUND Is In Input 0: YAGS_LTU1_844_OUT_LIMSW_POSITION Input 1: YAGS_LTU1_844_IN_LIMSW_POSITION Adding state "Moving" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Out" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "In" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Broken" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding XLEAP PRXL2 - YAGS LTU1 853 Position and TDUND Not In Added truth table "XLEAP PRXL2 - YAGS LTU1 853 Position and TDUND Not In" (834) Ignored when TD11 Is In Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when Stopper: BSY D2 Summary Is In Ignored when TDUND Is In Input 0: YAGS_LTU1_853_OUT_LIMSW_POSITION Input 1: YAGS_LTU1_853_IN_LIMSW_POSITION Adding state "Moving" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Out" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "In" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Broken" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding XLEAP PRXL3 - OTRS LTU1 858 Position and TDUND Not In Added truth table "XLEAP PRXL3 - OTRS LTU1 858 Position and TDUND Not In" (835) Ignored when TD11 Is In Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when Stopper: BSY D2 Summary Is In Ignored when TDUND Is In Input 0: OTRS_LTU1_858_OUT_LIMSW_POSITION Input 1: OTRS_LTU1_858_IN_LIMSW_POSITION Adding state "Moving" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Out" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "In" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Broken" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding XLEAP MIRR LTU1 829 Position Added truth table "XLEAP MIRR LTU1 829 Position" (836) Ignored when TD11 Is In Ignored when YAG01 Is In Ignored when YAG02 Is In Ignored when Stopper: BSY D2 Summary Is In Input 0: MIRR_LTU1_829_OUT_LIMSW_POSITION Input 1: MIRR_LTU1_829_APERTURE_3MM_POSITION Input 2: MIRR_LTU1_829_APERTURE_5MM_POSITION Adding state "Moving" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Out" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "3 mm Aperture" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "Broken" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "5 mm Aperture" Pockels Cell: 120 Mechanical Shutter: 120 BYKIK: 120 Laser Heater Shutter: None Adding state "Broken" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Broken" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None Adding state "Broken" Pockels Cell: 0 Mechanical Shutter: 0 BYKIK: 0 Laser Heater Shutter: None ====================================== ******************************************** **************** Device Add **************** ******************************************** The following devices will be added: 31 4 1 WIGG LTU1 849GAP_LIMSW_POSZ_TOP POSITION IS_NOT_OK IS_OK 1 XLEAP dwnstrm Y gap too small 31 4 2 WIGG LTU1 849GAP_LIMSW_POSZ_BOT POSITION IS_NOT_OK IS_OK 1 XLEAP dwnstrm Y gap too small 31 4 3 WIGG LTU1 849GAP_LIMSW_NEGZ_TOP POSITION IS_NOT_OK IS_OK 1 XLEAP upstrm Y gap too small 31 4 4 WIGG LTU1 849GAP_LIMSW_NEGZ_BOT POSITION IS_NOT_OK IS_OK 1 XLEAP upstrm Y gap too small 31 2 5 MIRR LTU1 829 APERTURE_5MM POSITION IS_NOT_IN IS_IN 1 XLEAP mirror not at 5mm position 31 2 13 MIRR LTU1 829 OUT_LIMSW POSITION IS_NOT_OUT IS_OUT 1 XLEAP mirror not OUT 31 2 14 MIRR LTU1 829 APERTURE_3MM POSITION IS_NOT_IN IS_IN 1 XLEAP mirror not at 3mm position 31 2 15 YAGS LTU1 844 OUT_LIMSW POSITION IS_NOT_OUT IS_OUT 1 XLEAP YAG not OUT 31 2 16 YAGS LTU1 844 IN_LIMSW POSITION IS_NOT_IN IS_IN 1 XLEAP YAG not IN 32 1 13 YAGS LTU1 853 OUT_LIMSW POSITION IS_NOT_OUT IS_OUT 1 XLEAP YAG not OUT 32 1 14 YAGS LTU1 853 IN_LIMSW POSITION IS_NOT_IN IS_IN 1 XLEAP YAG not IN 32 1 15 OTRS LTU1 858 OUT_LIMSW POSITION IS_NOT_OUT IS_OUT 1 XLEAP OTR not OUT 32 1 16 OTRS LTU1 858 IN_LIMSW POSITION IS_NOT_IN IS_IN 1 XLEAP OTR not IN Adding new Link Node Card 31.4 to database Adding new Link Node Channel 31.4.1 to database Adding new PV Device Type "WIGG" to database Check if already in ZFAULT: ZDEVICE=WIGG_LTU1_849_GAP_LIMSW_POSZ_TOP and ZNAME=POSITION Not found, so adding PV Fault"WIGG_LTU1_849_GAP_LIMSW_POSZ_TOP" POSITION Added Channel 31 4 1 -- WIGG_LTU1_849_GAP_LIMSW_POSZ_TOP POSITION Adding new Link Node Channel 31.4.2 to database Check if already in ZFAULT: ZDEVICE=WIGG_LTU1_849_GAP_LIMSW_POSZ_BOT and ZNAME=POSITION Not found, so adding PV Fault"WIGG_LTU1_849_GAP_LIMSW_POSZ_BOT" POSITION Added Channel 31 4 2 -- WIGG_LTU1_849_GAP_LIMSW_POSZ_BOT POSITION Adding new Link Node Channel 31.4.3 to database Check if already in ZFAULT: ZDEVICE=WIGG_LTU1_849_GAP_LIMSW_NEGZ_TOP and ZNAME=POSITION Not found, so adding PV Fault"WIGG_LTU1_849_GAP_LIMSW_NEGZ_TOP" POSITION Added Channel 31 4 3 -- WIGG_LTU1_849_GAP_LIMSW_NEGZ_TOP POSITION Adding new Link Node Channel 31.4.4 to database Check if already in ZFAULT: ZDEVICE=WIGG_LTU1_849_GAP_LIMSW_NEGZ_BOT and ZNAME=POSITION Not found, so adding PV Fault"WIGG_LTU1_849_GAP_LIMSW_NEGZ_BOT" POSITION Added Channel 31 4 4 -- WIGG_LTU1_849_GAP_LIMSW_NEGZ_BOT POSITION Adding new Link Node Channel 31.2.5 to database Check if already in ZFAULT: ZDEVICE=MIRR_LTU1_829_APERTURE_5MM and ZNAME=POSITION Not found, so adding PV Fault"MIRR_LTU1_829_APERTURE_5MM" POSITION Added Channel 31 2 5 -- MIRR_LTU1_829_APERTURE_5MM POSITION Adding new Link Node Channel 31.2.13 to database Check if already in ZFAULT: ZDEVICE=MIRR_LTU1_829_OUT_LIMSW and ZNAME=POSITION Not found, so adding PV Fault"MIRR_LTU1_829_OUT_LIMSW" POSITION Added Channel 31 2 13 -- MIRR_LTU1_829_OUT_LIMSW POSITION Adding new Link Node Channel 31.2.14 to database Check if already in ZFAULT: ZDEVICE=MIRR_LTU1_829_APERTURE_3MM and ZNAME=POSITION Not found, so adding PV Fault"MIRR_LTU1_829_APERTURE_3MM" POSITION Added Channel 31 2 14 -- MIRR_LTU1_829_APERTURE_3MM POSITION Adding new Link Node Channel 31.2.15 to database Check if already in ZFAULT: ZDEVICE=YAGS_LTU1_844_OUT_LIMSW and ZNAME=POSITION Not found, so adding PV Fault"YAGS_LTU1_844_OUT_LIMSW" POSITION Added Channel 31 2 15 -- YAGS_LTU1_844_OUT_LIMSW POSITION Adding new Link Node Channel 31.2.16 to database Check if already in ZFAULT: ZDEVICE=YAGS_LTU1_844_IN_LIMSW and ZNAME=POSITION Not found, so adding PV Fault"YAGS_LTU1_844_IN_LIMSW" POSITION Added Channel 31 2 16 -- YAGS_LTU1_844_IN_LIMSW POSITION Adding new Link Node Channel 32.1.13 to database Check if already in ZFAULT: ZDEVICE=YAGS_LTU1_853_OUT_LIMSW and ZNAME=POSITION Not found, so adding PV Fault"YAGS_LTU1_853_OUT_LIMSW" POSITION Added Channel 32 1 13 -- YAGS_LTU1_853_OUT_LIMSW POSITION Adding new Link Node Channel 32.1.14 to database Check if already in ZFAULT: ZDEVICE=YAGS_LTU1_853_IN_LIMSW and ZNAME=POSITION Not found, so adding PV Fault"YAGS_LTU1_853_IN_LIMSW" POSITION Added Channel 32 1 14 -- YAGS_LTU1_853_IN_LIMSW POSITION Adding new Link Node Channel 32.1.15 to database Check if already in ZFAULT: ZDEVICE=OTRS_LTU1_858_OUT_LIMSW and ZNAME=POSITION Not found, so adding PV Fault"OTRS_LTU1_858_OUT_LIMSW" POSITION Added Channel 32 1 15 -- OTRS_LTU1_858_OUT_LIMSW POSITION Adding new Link Node Channel 32.1.16 to database Check if already in ZFAULT: ZDEVICE=OTRS_LTU1_858_IN_LIMSW and ZNAME=POSITION Not found, so adding PV Fault"OTRS_LTU1_858_IN_LIMSW" POSITION Added Channel 32 1 16 -- OTRS_LTU1_858_IN_LIMSW POSITION ======================================