1. Add logic for new valve, VVFV:IN20:785 2. Implement part of Dechirper logic. This is the part that is common between both versions of logic: There will be 2 versions of logic during initial deployment: Commissioning logic and Production logic. Commissioning logic will be running during commissioning shifts only. The rest of the time, Production logic will be used. This common part of the logic includes Beam Loss Fiber (BLF) interlocks only. More details here: https://slacspace.slac.stanford.edu/sites/controls/specialprojects/dechirper/Documents/Dechirper%20MPS/Dechirper_MPS.docx 3. Set "XPP CS-PAD 1 Detector Damage Fault" logic inactive per Alex Wallace On Fri, 4 Sep 2015, Wallace, Alex wrote: Hi Sonya, Yes that's the one. We'll also need a channel on LN 41 for the new MFX line. I'll have to get back to you on that one. Will I have another opportunity or is today really the best for you? Thanks, -Alex Date: Thu, 3 Sep 2015 10:17:06 -0700 (PDT) From: Sonya Hoobler To: "Wallace, Alex" Subject: Re: MPS updates? >Hi Alex, > >Thanks! > >If you did, I'm afraid I lost it. > >Should I remove this logic: > >"XPP CS-PAD 1 Detector Damage Fault" > >? > >Thanks, > Sonya On Thu, 3 Sep 2015, Wallace, Alex wrote: >> Hi Sonya, >> >> Welcome back! >> >> Did I send you an email about removing the MPS CSPAD fault for XPP? >> >> Best regards, >> -Alex [sonya@lcls-dev2 algorithm]$ sdiff -bs 2015-09-03-a/doc/MPSLogicDocumentation.txt 2015-07-13-b/doc/MPSLogicDocumentation.txt .. title:: MPS Logic 2015-09-03-a | .. title:: MPS Logic 2015-07-13-b > XPP CS-PAD 1 Detector Damage Fault > ---------------------------------- > ======== = ==================== ==================== ======== > Name A Pockels Cell Mechanical Shutter B > ======== = ==================== ==================== ======== > Fault F 0 Hz 0 Hz > No Fault T 120 Hz 120 Hz > ======== = ==================== ==================== ======== > > Where:: > > A = XPP_DET_01_MPSFAULT_STATUS > > BLM Heartbeat: Dechirper LTU1 BLF545 < ------------------------------------ < =================== = = ==================== ================ < Name B A Pockels Cell Mechanical Shut < =================== = = ==================== ================ < Broken F F 0 Hz < Over High Threshold F T 0 Hz < Under Low Threshold T F 0 Hz < OK T T 120 Hz 12 < =================== = = ==================== ================ < < Where:: < < A = BLM_LTU1_BLF545_TEST_L_THRESHOLD < B = BLM_LTU1_BLF545_TEST_H_THRESHOLD < < < BLM Pedestal Thresholds: Dechirper LTU1 BLF545 < ---------------------------------------------- < =================== = = ==================== ================ < Name B A Pockels Cell Mechanical Shut < =================== = = ==================== ================ < Broken F F 0 Hz < Over High Threshold F T 0 Hz < Under Low Threshold T F 0 Hz < OK T T 120 Hz 12 < =================== = = ==================== ================ < < Where:: < < A = BLM_LTU1_BLF545_PED_L_THRESHOLD < B = BLM_LTU1_BLF545_PED_H_THRESHOLD < < < BLM Raw Charge Thresholds: Dechirper LTU1 BLF545 < ------------------------------------------------ < =================== = = ==================== ================ < Name B A Pockels Cell Mechanical Shut < =================== = = ==================== ================ < Broken F F 0 Hz < Over High Threshold F T 0 Hz < Under Low Threshold T F 0 Hz < OK T T 120 Hz 12 < =================== = = ==================== ================ < < Where:: < < A = BLM_LTU1_BLF545_LOSS_L_THRESHOLD < B = BLM_LTU1_BLF545_LOSS_H_THRESHOLD < < < VVFV IN20 785 Position < ---------------------- < ======= = ==================== ==================== ========= < Name A Pockels Cell Mechanical Shutter BY < ======= = ==================== ==================== ========= < Not Out F 0 Hz 0 Hz < Out T 120 Hz 120 Hz < ======= = ==================== ==================== ========= < < Where:: < < A = VVFV_IN20_785_OPEN_LMTSW_POSITION < < <