Date: Fri, 18 Oct 2013 11:14:57 -0700 (PDT) From: Sonya Hoobler To: Alex Wallace Subject: Re: AMO MPS Update Hi Alex, Since these may be used again, I think I will only remove the link node channels that are being replaced: High End Field Physics Chamber Gate Valve Summary LN 39 Card 1 Ch 9-10 AMO_HFP_VGC_02A AMO_HFP_VGC_02B Thanks again, Sonya On Fri, 18 Oct 2013, Alex Wallace wrote: > Hi Sonya, > > Good question. It is likely AMO will use these inputs again at some point, but to keep things simple can we add them back when > needed? So far as I understand it, they will not need them for a while. > > Best, > -Alex > > > On 10/18/13 10:07, Sonya Hoobler wrote: > > Hi Alex, > > > > Just want to confirm: > > > > For NEH AMO Diagnostics Chamber Gate Valve and NEH AMO End Station Ready, > > do you want to remove the link node inputs for these as well as the MPS > > logic for them (i.e. they will never be used again)? > > > > Thanks, > > Sonya Date: Tue, 15 Oct 2013 08:39:43 -0700 From: Alex Wallace To: Sonya Hoobler Subject: Re: AMO MPS Update Parts/Attachments: 1.1 Shown 72 lines Text 1.2 OK 123 lines Text 2 1.2 KB Application 3 456 bytes Application ---------------------------------------- Hi Sonya, Here's the scoop: Please remove the following from MPS: NEH AMO Diagnostics Chamber Gate Valve: Open NEH AMO Diagnostics Chamber Gate Valve: Closed NEH AMO HFP Beam Stop: Fully In NEH AMO HFP Beam Stop: Fully Out Please remove the HFP:MPA:STP:02 as a veto device (and a device all together). Please remove all faults vetoed by this device. So basically all of section 22 from revision 2012-09-26-a (here ) Attached are some json files for the new faults and devices. Hopefully they were done correctly. I do this so infrequently I am sorry to say I often forget how to write them. I need a better example for my notes :). Thanks and best regards, -Alex