mpsConfiguration-R1-115:
added file database/2012-08-08-a/AdditionalCode.h, otherwise same as 114 
Database 2012-08-08-a
Logic    2012-08-08-a
---------------------
upgrade to epics-R3-14-12, mps-R1-0-1-branch-R1-2

mpsConfiguration-R1-114:
Database 2012-08-08-a
Logic    2012-08-08-a
---------------------
upgrade to epics-R3-14-12, mps-R1-0-1-branch-R1-2

mpsConfiguration-R1-113:
Logic   2012-06-29-a
------------
* Fixed bug in SL10 IS IN state, state # is 15 (ie 1111) not 4.
* Fixed a bug in HXRSS Mode Logic (is code=True) became false in Logic 2012-06-25-a, 
	Logic 2012-06-25-a should NO Longer be used!!!



mpsConfiguration-R1-112:
Logic   2012-06-25-a
------------
* De-activate some BSYA logic  per R. Iverson and C. hast
* Added PPS STOPPER Inputs
* changes existing PPS logic to use new inputs	
* De-Activated A-Line Profile Monitor Summary logic per R. Iverson 

Config 2012-06-25-a
------------
* Added BSYA PPS Inputs
* removed some BSYA inputs that are now being replaced by the PPS inputs
* removed A-Line Kicker auto recovery for trigger inputs

Logic   2012-06-05-a
------------
* De-activate some BSY PICS in Logic per R. Iverson
	PIC Unit numbers:
	LCLS  SLC 
	65	145	Trips often if PM1 is on-bypassed			
	67	155				
	69	165				
	71	175				
	73	185				
	75	195				
	76	205	

Config 2012-06-05-a
------------
* Clean up names of A-Line devices, desc was too long
	
DESC, "SLIT_BSYA_2010_SL10_CLS_LIMIT" to  blahÉLIM instead of LIMIT 
DESC, "STPR_BSYA_2275_ST22_OUT_LIMIT" to  blahÉLIM

* Remove recovery for A-Line Kicker Rate Inputs so that it doesn't fill up Logs when kicker is at rates less than 120Hz.


mpsConfiguration-R1-110:

Logic   2012-05-21-a
------------
* Changes for CXI and MEC
* Logic for A-Line, removed unused inputs

Config 2012-05-05-a
------------ 
* Set BSYA PICM's to NOT have auto recovery
   


mpsConfiguration-R1-109:

Logic   2012-05-05-a
------------
* de-Activate logic for
	 VVPG:LI21:1:POSITION Per Ted Martinez 
* Logic for A-Line
* Logic MEC
Config 2012-05-05-a
------------ 
* Add BSYA XCOR Power Supply input


mpsConfiguration-R1-108:
Config  2012-04-30-a baed on 2012-03-20-a but fixed PICM channel errors
------------
* Added Link Node 43 for A-Line KICKER (BYKICK TYPE)
* Added inputs for A-Line


mpsConfiguration-R1-107:
Config 2012-04-22-a
------------
* Added Link Node 42 for A-Line PICs along with A-LINE PICMs.

mpsConfiguration-R1-106:
Config 2012-03-20-a
	* Added new CXI Valve
	* Fix Input typos in LNW_BSO and STPR_BSY_88
Logic 2012-03-20-a
	* same logic as 2012-01-06-a but includes the config typo fix
Logic 2012-03-20-b
	* based on 2012-03-20-a and includes new CXI valve logic

mpsConfiguration-R1-105:
Config 2012-01-06-a
	* Added HXRSS HOZ and YAW Home Status
	* Updated for Puleo Status

mpsConfiguration-R1-104:
Added Config: 2012-01-03-a for VVFS:DMP1:107
Added Logic: 2012-01-03-a MEC logic and VVFS:DMP1:107

mpsConfiguration-R1-103:
Added Config: 2011-11-29-a which fixes A-Line Kicker ON/OFF read back strings
Added Logic: 2011-11-29-a and 2011-11-15-b for MEC logic

mpsConfiguration-R1-102:
Add Logic:  2011-11-15-a  and 2011-11-15-b for new CXI and MEC logic, "b" includes logic for HXRSS full installation.
Add Config: 2011-11-15-a for A-Link Kicker Pulser Status, inputs not added to logic input list

mpsConfiguration-R1-101:
Add Logic:  2011-11-07-a  and 2011-11-07-b for HXRSS
Add Config: 2011-11-07-a for MEC and CXI
Logic corrects "BXG is On" 0 bit input error which was set to BEND_IN20_751_OFF, corrected it to be BEND_IN20_231_OFF.

mpsConfiguration-R1-100:
Add Logic:  2011-10-31-a  and 2011-10-31-b for HXRSS
Add Config: 2011-10-31-a for HXRSS

mpsConfiguration-R1-99:
Add Logic:  2011-09-19-a for MEX and XPP

mpsConfiguration-R1-98:
Add Config:  2011-09-12-a per MEC

mpsConfiguration-R1-97:
-- Add Config: 2011-08-26-a to set Detector Pad Faults autorecovery to False 

mpsConfiguration-R1-96:
-- Add Logic: 2011-08-10-a Fixed error in M3H Ignore logic definitions. 

mpsConfiguration-R1-95:
-- Logic: 2011-08-09-a
---- Changes for Mark Arndt in MEC, XPP, and CXI

mpsConfiguration-R1-94:
-- Logic: 2011-08-01-a
---- Added updated BYKICK Readback Logic to ignore when D2 is IN
-- Config: 2011-08-01-a
----Changes for Mark Arndt in Config
	

mpsConfiguration-R1-93:
-- Logic: 2011-07-12-a
-- Config: 2011-07-12-a
-- Changes for CXI per Mark Arndt

mpsConfiguration-R1-92:
-- Logic: 2011-07-05-a
-- Config: 2011-07-05-a
-- Additional ignore devices for UM6; DG2; XCS devices; add new devices for upcoming runs

mpsConfiguration-R1-91:
-- Logic: 2011-06-28-a
-- Config: 2011-06-15-a
-- New XCS logic; remove some obsolete NEH and XCS logic

mpsConfiguration-R1-90:
-- Logic: 2011-06-17-a
-- Config: 2011-06-15-a
-- Fix bug introduced in mpsConfiguration-R1-88 

mpsConfiguration-R1-89: **Bug in this version; DO NOT USE**
-- Logic: 2011-06-16-a
-- Config: 2011-06-15-a
-- Fix bug introduced in mpsConfiguration-R1-88

mpsConfiguration-R1-88: **Bug in this version; DO NOT USE**
-- Logic: 2011-06-15-a
-- Config: 2011-06-15-a
-- Add XPP truth table and ignore condition.
   Add XCS inputs.
   Cleanup: remove obsolete XRT input and CXI logic
            remove obsolete FEE stopper inputs

mpsConfiguration-R1-87:

-Logic 2011-05-31-a
--Add 2 new XPP logic tables

-Logic 2011-05-26-a
-- Add new CXI Logic
-- Add new MEC Logic
-- Add D2 Logic and D2 Ignore Device Logic
-- Change Valve Logic to include D2 and TD11 Ignore Logic per Iverson

-Databse 2011-05-26-a
--Remove Extra B921 ST1_ST2 Inputs that never were used. Real status comes from B950.

-Logic 2011-05-25-a
   *IMPORTANT IMPORTANT IMPORTANT 
	NOTE: reverted back to logic 2010-09-28-a because 
	everything in logic sqlite filse from then till 
	now was malformed. Recreated all logic changes 
	so that logic 2011-02-26-a and 2011-05-25-a 
	are equivalent, but 2011-05-25-a has db issues 
	resolve and extra S5 Position Logic. Added 
	AutoIncroment to sqlite Mpslogic.mpl tables.


mpsConfiguration-R1-86:
-config: 2011-05-11-a
--Add support new inputs and  for CXI
--Add RTD summary past BSY D2 inputs 

mpsConfiguration-R1-85:
-config: 2011-05-04-a
--Add support new inputs and  for CXI
--Add D2 inputs 

mpsConfiguration-R1-84:
-Should not be used

mpsConfiguration-R1-83:
-Logic:  2011-02-26-a
-config: 2011-02-26-a
--Add support for soft input for CXI CS-PAD-Damage Fault and reverted logic back for CXI Configuration 4 Summary.

 
mpsConfiguration-R1-82:
-Logic: 2011-02-25-a
-- Per Mark Arndt and CXI request, temporarily changed CXI MPS CFG 4 CONFID logic from "CXI Configuration 4 Summary" to "CXI CS-PAD-Damage Fault". Changes should be backed out when CXI changes can support a proper protection design. Logic for "CXI Configuration 4 Summary" should revert back to logic 2011-2-2-a when needed.

mpsConfiguration-R1-81:
 -Deactivate logic for BSY Prof PR1_2, 50PR3, and PR2 per Iverson. Added BSY PIC HV per Sony. 

mpsConfiguration-R1-80:
 -Add logic and database "2011-01-08-a" to change PV name of input and sway states. 

mpsConfiguration-R1-79:
 -Add logic 2010-12-06-a (for CXI Config 1-7 and PLC_OK Status logic)

mpsConfiguration-R1-78:
 -Add database 2010-12-01-a for CXI 
 -Add logic 2010-12-01-a for CXI
 - Removed extra HXX:MXT:VGC_01:OPN_DI Position input and removed from logic 

mpsConfiguration-R1-77:
 -Add database 2010-11-29-a for CXI (built from database 2010-09-28-a)
 -Add logic 2010-11-29-a for CXI

mpsConfiguration-R1-76:
 -Add database 2010-11-22-b for CXI (built from database 2010-09-28-a)

mpsConfiguration-R1-75:
 -Add database 2010-11-22-a for CXI

mpsConfiguration-R1-74:
 - Add database 2010-09-28-a (Changed name of TRHZ:DMP1:310 to THZR:DMP1:350)
 - Add logic 2010-09-28-a (same as above)

mpsConfiguration-R1-73:
 - Add database 2010-09-24 (added VVMG-DMP1-743)
 - Add logic 2010-09-24 (added VVMG-DMP1-743, remove BSY Fast Gauges and BSYA B11)

mpsConfiguration-R1-72:
 - Update which CONFIG and LOGIC to build in top level Makefile (should have been 
   included in R1-71)

mpsConfiguration-R1-71:
 - New database and logic 2010-08-30-a. Add NEH AMO End Station Ready; Set NEH2 HXRAY StrongBack 1 Isolation Valve to inactive" 
 - Builds database 2010-08-17a and 2010-08-30-a
 - Builds logic 2010-08-17a and 2010-08-30a

mpsConfiguration-R1-70:
 - New databaseand logic  2010-08-17-a. (added BYKICK watchdog)

mpsConfiguration-R1-69:
 - New database 2010-08-11-a, logic 2010-08-11-a (Add PICM:BSYA:1701A,1701B) 

mpsConfiguration-R1-68:
 - New database 2010-08-10-a 

mpsConfiguration-R1-67:
 - New logic 2010-08-09-a (BSYA devices ignore BYKICK)

mpsConfiguration-R1-66:
- Fixed double BSYA devices
- Added logic for BSYA Prof and BSYA PIC ignore on B1/B2
	
mpsConfiguration-R1-65:
- Added BSYA devices

mpsConfiguration-R1-64:
- Made BSY PIC inputs latching
- Added mpslogic_create_pic_patch.py application

mpsConfiguration-R1-63:
- Corrects CE11 flowswitch input and logic

mpsConfiguration-R1-62:
- Added PIC inputs to LN 25
- Added PIC logic for LN 11, 16, and 22

mpsConfiguration-R1-61:
- Added NO_TRIG inputs to LN 11, 16, and 22

mpsConfiguration-R1-60:
- Removed PIC autorecover

mpsConfiguration-R1-59:
- Removed PICs from LN 23, 25, and 26

mpsConfiguration-R1-58:
 - Corrected Link Node types

mpsConfiguration-R1-57:
 - Added PIC inputs

mpsConfiguration-R1-56:
 - Updated photon section inputs

mpsConfiguration-R1-55:
 - New configurations, 2010-03-23-a, 2010-03-29-a
 - New logic 2010-03-30-a

mpsConfiguration-R1-54:
 - New configuration, 2010-03-16-a

mpsConfiguration-R1-53:
 - Alg common uses mps-R1-0-0

mpsConfiguration-R1-52:
 - New unlatch PVs
 - New algorithm wrapper to use latched values
 - New EDM displays
 - Better Makefiles reduce number of products built
 - Replaced deprecated Python code (os.popen)
 - Split up mpsconfig Python module.  Easier to modify, understand.

mpsConfiguration-R1-51:
 - Updated channel mapping
 - Updated BASII stopper logic to use new channel mapping

mpsConfiguration-R1-50:
 - TIMING_STABLE logic added
 - TIU inputs added to logic

mpsConfiguration-R1-49:
 - TIMING_STABLE input added
 - BPM BYKIK input (27/1/14) is now a latching fault

mpsConfiguration-R1-48:
 - Rate request logic for BYKIK and Pockels Cell
 - Rate requests include burst and single shot modes for BYKIK and Pockels cell

mpsConfiguration-R1-47:
 - Added 1553 logic
 - Added rate request logic and inputs

mpsConfiguration-R1-46:
 - Updated AMO logic
 - Updated MPS configuration

mpsConfiguration-R1-45:
 - Added AMO logic

mpsConfiguration-R1-44:
 - Added AMO inputs and stopper S1 in status

mpsConfiguration-R1-43:
 - Added AMO inputs and stopper S1 in status

mpsConfiguration-R1-42:
 - Added "Phase Two Alpha" FEE and NEH inputs and logic

mpsConfiguration-R1-41:
 - Added PIC/BLM watchdog faults

mpsConfiguration-R1-40:
 - Removed ignore cases from ST1/ST2 B4C protection logic

mpsConfiguration-R1-39:
 - Added B4C/ST1ST2 logic

mpsConfiguration-R1-38:
 - Added FEE logic, moved ST1 ST2 inputs to different card

mpsConfiguration-R1-37:
 - Moved LN 38/4 to 38/3 to match reality

mpsConfiguration-R1-36:
 - Added FEE phase 1 inputs

mpsConfiguration-R1-35:
 - Remapped LTU PIC inputs
 - Removed masking of LTU PICS on TDUND

mpsConfiguration-R1-34:
 - PICM 732 latches
 - Update to EPICS fault latching

mpsConfiguration-R1-33:
 - Better fault numbering

mpsConfiguration-R1-32:
 - Added LN28/29 PICs

mpsConfiguration-R1-31:
 - Bypass recover internal input and logic

mpsConfiguration-R1-30:
 - Moved BFW 1010 In from 33/1/13 to 32/1/12

mpsConfiguration-R1-29:
 - Renamed BFW inputs

mpsConfiguration-R1-28:
 - Removed EPICS BFW inputs

mpsConfiguration-R1-27:
 - Added PIC inputs

mpsConfiguration-R1-26:
 - Moved BFW 1810 and 2610 to non-card-1-chan-13 inputs

mpsConfiguration-R1-25:
 - Pockels Cell AND Gate TT no longer affects LHS
 - Uses hardwired BFW In status

mpsConfiguration-R1-24:
 - Added LN34 no trig input

mpsConfiguration-R1-23:
 - Added LN34 PICs

mpsConfiguration-R1-22:
 - Added BTM summary fault PV

mpsConfiguration-R1-21:
 - Removed many PV faults

mpsConfiguration-R1-20:
 - Added BFW In PV faults

mpsConfiguration-R1-19:
 - Corrected magnet PV names

mpsConfiguration-R1-18:
 - Added magnet PV faults

mpsConfiguration-R1-17:
 - Added OTR 621 logic

mpsConfiguration-R1-16:
 - Added OTR/TDUND logic

mpsConfiguration-R1-15:
 - Added BLM:LTU1:980 to algorithm 2009-04-03-a

mpsConfiguration-R1-14:
 - New algorithms with much more BLM logic

mpsConfiguration-R1-13:
 - Moved VVMG:LTU1:505 from LN29-01-13 to LN29-01-03

mpsConfiguration-R1-12:
 - New algorithm and configuration to handle laser AND gate

mpsConfiguration-R1-11:
 - Added many BLM and BLM HVPS inputs
 - Added new shutter inputs
 - Better documentation export
 - New algorithm wrapper
 - New MPS Logic

mpsConfiguration-R1-10:
 - Added BLM channels for link nodes 30, 32, 33, 35, and 37.
 - Changed LN36's BLM names to match the new channels.
 - Shifted LN10's card 2 channels up by one channel number.
 - Updated database/current to 2009-02-26-a

mpsConfiguration-R1-9:
 - New algorithm export format.  Initializes rates to 120 Hz.

mpsConfiguration-R1-8:
 - New algorithm export format

mpsConfiguration-R1-7:
 - New handwritten algorithm 2009-02-20-c

mpsConfiguration-R1-6:
 - Ignore logic inverted

mpsConfiguration-R1-5:
 - Algorithm fixes laser heater logic

mpsConfiguration-R1-4:
 - Added new DB with four new PV inputs (BP01-BP04)
 - New MPS logic created to use these inputs
 - New SNL output.

mpsConfiguration-R1-3:
 - Removed BFW 110 EPICS channel from config DB.

mpsConfiguration-R1-2:
 - Algorithm 2009-02-18-a modified to remove more EPICS dependencies.

mpsConfiguration-R1-1:
 - Algorithm 2009-02-18-a added.  Removes dependency on EPICSs status.

mpsConfiguration-R1-0:
 - Initial version

