
Config 2012-06-25-a
------------
* Added BSYA PPS Inputs



Config 2012-06-05-a
------------
* Clean up names of A-Line devices, desc was too long
	
DESC, "SLIT_BSYA_2010_SL10_CLS_LIMIT" to  blahÉLIM instead of LIMIT 
DESC, "STPR_BSYA_2275_ST22_OUT_LIMIT" to  blahÉLIM

* Remove recovery for A-Line Kicker Rate Inputs so that it doesn't fill up Logs when kicker is at rates less than 120Hz.


2012-05-18-a
------------
Update PICM:BSYA to be nonrecoverable.

2012-05-05-a
------------
Add XCOR BSYA Input


2012-04-30-a
------------
* reverted to 2012-03-20-a, 2012-04-22-a had PICM:BSYA channel errors
* Added Link Node 43 for A-Line KICKER (BYKICK TYPE)
* Added inputs in LN42 and 43 for A-Line

2012-04-22-a
------------
* Added Link Node 42 for A-Line PICs along with A-LINE PICMs.

2012-03-20-a
------------
* Added new CXI Valve
* Fix Input typos in LNW_BSO and STPR_BSY_88

2012-01-06-a
------------
* New HXRSS HOZ and YAW Home Status
* Puleo Chassis Updates

2012-01-03-a
------------
* New Fast Shutter in UND Name= VVFS:DMP1:107


2011-11-29-a
------------
* Changed A-Link Kicker Pulser status 1 & 2 per Tony Beukers


2011-11-15-a
------------
* Added new MPS inputs for A-Link Kicker Pulser status 1 & 2

2011-11-07-a
------------
* Adds new inputs for CXI and MEC.

2011-10-31-a
------------
* Add inputs for HXRSS system, re-assigned some iMPS inputs that are not used in logic for HXRSS
* Add RTD soft input for past SL10 A-Line

2011-09-12-a
------------
* Per Mark Arndt The change will be redefining Link Node 40 input on card 4 channel 14.
The new definition is:
[40,  4,   14,  "MEC:HXM:MMS_04:B", "POSITION", "IS_NOT_OUT", "IS_OUT", true, "MEC HXM reference laser mirror out of beam"]


2011-08-26-a
------------
* Per Mark Arndt and CXI: make inputs for the following Logic tables not autorecover 
	CXI CS-PAD 1 Detector Damage Fault
 	CXI CS-PAD 2 Detector Damage Fault
 	XPP CS-PAD 1 Detector Damage Fault

2011-08-01-a
------------
* Per Mark Arndt, add new devices per patch files

2011-07-12-a
------------
* Per Mark Arndt, 
Config and Logic changes are:

Link Node 40 card 1, channel 16  is now CXI_DSU_MMM_07_B_POSITION 
	becomes   CXI_DSD_MMS_07_B_POSITION
Link Node 40 card 6, channel 2   is now XCS_DG3_VGC_01_OPN_DI_POSITION
	becomes   CXI_DSU_MMS_07_B_POSITION

*XCS_DG3_VGC_01_OPN_DI_POSITION is removed from configuration 
	DB and logic DB device list. It was not used on any
	logic tables.

* Add new device (rename a junk name to new device
	CXI_DSD_MMS_07_B_POSITION)
* Change name of CXI_DSU_MMM_07_B_POSITION to CXI_DSU_MMS_07_B_POSITION
* Add revised CXI_Config4 logic C code
* Update CXI_Config5 with name modification (CXI_DSU_MMM_07_B_POSITION 
	to CXI_DSU_MMS_07_B_POSITION)


2011-07-05-a
------------
* Per Mark Arndt, add devices:

    HXX_HXM_MMS_01_B_POSITION
    HXX_MPS_PLC_01_OK_STATUS
    STPR_XRT1_1_S4IN_POSITION
    STPR_XRT1_1_S4OUT_POSITION
    STPR_XRT1_1_S6IN_POSITION
    STPR_XRT1_1_S6OUT_POSITION
    XCS_MPS_PLC_01_OK_STATUS
    XPP_MPS_PLC_01_OK_STATUS


2011-06-15-a
------------
* Per Mark Arndt
* Add XCS inputs, per database patch FEH_XCS_MPS_Patch_File_June2011_r1.json
* Remove obsolete XRT input:
  "XRT:DIA_DET:01:MPSFAULT"

* Clean-up: Remove obsolete FEE stopper inputs:
  "PPS_FEE1_1_STPR01_IN_POSITION"
  "PPS_FEE1_1_STPR01_OUT_POSITION"

2011-05-11-a
------------
*Per Mark Arndt add additional CXI inputs
   change PV Fault/Ok string names for 
  Card 4, channel 4, "CXI:DET_01:MPSFAULT"
  Card 4, channel 5, "CXI:DET_02:MPSFAULT"
  Card 4, channel 6,  "CXI:USR_01:MPSFAULT"
  Card 4, channel 7,  "CXI:USR_02:MPSFAULT"

  In each case, the label for the low/deasserted state should 
     change from "IS_NOT_FAULTED" to "IS_FAULTED".
  Also, the label for the high/asserted state 
        should change from "IS_FAULTED" to "IS_OK".

* Add new RTD soft input for BSY Past D2 per Sonya

Also, the label for the high/asserted state should change from "IS_FAULTED" to "IS_OK".

2011-05-05-a
------------
* Per Mark Arndt and CXI request, added CXI inputs
* Added D2 status

2011-02-26-a
------------
* Per Mark Arndt and CXI request, added EPICS input XRT:DIA_DET:01:MPSFAULT
for "CXI CS-PAD-Damge Fault" logic

2011-02-2-a
------------
* Added BSY PICM HV readback

2011-01-08-a
------------
* Renamed PV attribute of "MPS_STATE" to "PEAKPOWER" for MPS device FLT_20_6_TRP. Also changed OK and Fault name, signal is OK in low state and faulted in high.


2010-12-01-a
------------
* Removed extra HXX:MXT:VGC_01:OPN_DI Position input and removed from logic 

2010-11-29-a
------------
* Added additional CXI MPS inputs per Mark Arndt in LN 40. Re-patched based on 2010-09-28a 

2010-11-22-b
------------
* Added additional CXI MPS inputs per Mark Arndt in LN 40. 

2010-11-22-a
------------
* Added CXI MPS inputs per Mark Arndt in LN 40

2010-09-28a
------------
* Change name and unit # for "TRHZ:DMP1:310" to "THZR:DMP1:350"

2010-09-24a
------------
* Added "VVMG:DMP1:743"

2010-08-300a
------------
* Added "NEH AMO End Station Ready AMO-EXP-MPS-01"

2010-08-17-a
------------
* Added BYKICK watchdog 

2010-08-11-a
------------
* Added A-Line PICM BSYA:1701A and BSYA:1701B  (not auto recoverable)

2010-08-10-a
------------
* Corrected Faulted State Name for:
   "PROF:BSYA:1:OUT_SUM"
   "BEND:BSYA:140:B1_2_PS_ON"
   "COLL:BSYA:1015:FLOW_SW"
   "VVFS:BSYA:1030:POSITION"
   "VVPG:BSYA:1018:POSITION"
* Changed PICM:BSYA to not auto recoverable

2010-08-04-a
------------
!NOTE: based on 2010-07-06-a 
* Added more A-line devices (PICS, EPICS, Digital) 

2010-08-03-a
------------
* Added more A-line devices

2010-07-29-a
------------
* Added A-line devices (including PICs)

2010-07-06-a
------------
* Made BSY PIC inputs latching

2010-06-30-a
------------
* 11/3/12: DUMP_LI21_FLSW_OPEN -> COLL_LI21_235_OPEN
* 11/3/12: DUMP:LI21:305:FLOW_SW_MPSC -> COLL:LI21:235:FLOW_SW_MPSC

2010-06-21-a
------------
* Added LN 25 PIC inputs

2010-06-16-b
------------
* Added NO_TRIG inputs to LN 11, 16, and 22

2010-06-16-a
------------
* Removed PIC autorecover

2010-06-15-c
------------
* Removed PICs from LN 23, 25, and 26

2010-06-15-b
------------
* Corrected Link Node types

2010-06-15-a
------------
* Added PIC Inputs for
    * 11/1/1
    * 11/1/2
    * 11/1/3
    * 11/1/4
    * 11/1/5
    * 11/1/6
    * 16/1/1
    * 16/1/2
    * 22/1/1
    * 22/1/2
    * 22/1/3
    * 22/1/4
    * 22/1/5
    * 22/2/1
    * 22/2/2
    * 22/2/3
    * 22/2/4
    * 22/2/5
    * 23/1/1
    * 25/1/1
    * 25/1/2
    * 25/1/3
    * 25/1/4
    * 25/1/5
    * 25/1/6
    * 25/1/7
    * 25/1/8
    * 26/2/1
    * 26/2/2
    * 26/2/3
    * 26/2/4
    * 26/2/5

2010-05-20-b
------------
* Made TORO:IN20:971 inputs latching.

2010-05-20-a
------------
* Renamed BLM:UND1:4:TIMING(_L, _H, _1_L, _1_H) to
  BLM:UND1:4:HRTBT(_L, _H, _1_L, _1_H).

2010-05-04-a
------------
* Made BYKIK thresholds latching.

