mpsConfiguration-R1-113: Logic 2012-06-29-a ------------ * Fixed bug in SL10 IS IN state, state # is 15 (ie 1111) not 4. * Fixed a bug in HXRSS Mode Logic (is code=True) became false in Logic 2012-06-25-a, Logic 2012-06-25-a should NO Longer be used!!! mpsConfiguration-R1-112: Logic 2012-06-25-a ------------ * De-activate some BSYA logic per R. Iverson and C. hast * Added PPS STOPPER Inputs * changes existing PPS logic to use new inputs * De-Activated A-Line Profile Monitor Summary logic per R. Iverson Config 2012-06-25-a ------------ * Added BSYA PPS Inputs * removed some BSYA inputs that are now being replaced by the PPS inputs * removed A-Line Kicker auto recovery for trigger inputs Logic 2012-06-05-a ------------ * De-activate some BSY PICS in Logic per R. Iverson PIC Unit numbers: LCLS SLC 65 145 Trips often if PM1 is on-bypassed 67 155 69 165 71 175 73 185 75 195 76 205 Config 2012-06-05-a ------------ * Clean up names of A-Line devices, desc was too long DESC, "SLIT_BSYA_2010_SL10_CLS_LIMIT" to blahÉLIM instead of LIMIT DESC, "STPR_BSYA_2275_ST22_OUT_LIMIT" to blahÉLIM * Remove recovery for A-Line Kicker Rate Inputs so that it doesn't fill up Logs when kicker is at rates less than 120Hz. mpsConfiguration-R1-110: Logic 2012-05-21-a ------------ * Changes for CXI and MEC * Logic for A-Line, removed unused inputs Config 2012-05-05-a ------------ * Set BSYA PICM's to NOT have auto recovery mpsConfiguration-R1-109: Logic 2012-05-05-a ------------ * de-Activate logic for VVPG:LI21:1:POSITION Per Ted Martinez * Logic for A-Line * Logic MEC Config 2012-05-05-a ------------ * Add BSYA XCOR Power Supply input mpsConfiguration-R1-108: Config 2012-04-30-a baed on 2012-03-20-a but fixed PICM channel errors ------------ * Added Link Node 43 for A-Line KICKER (BYKICK TYPE) * Added inputs for A-Line mpsConfiguration-R1-107: Config 2012-04-22-a ------------ * Added Link Node 42 for A-Line PICs along with A-LINE PICMs. mpsConfiguration-R1-106: Config 2012-03-20-a * Added new CXI Valve * Fix Input typos in LNW_BSO and STPR_BSY_88 Logic 2012-03-20-a * same logic as 2012-01-06-a but includes the config typo fix Logic 2012-03-20-b * based on 2012-03-20-a and includes new CXI valve logic mpsConfiguration-R1-105: Config 2012-01-06-a * Added HXRSS HOZ and YAW Home Status * Updated for Puleo Status mpsConfiguration-R1-104: Added Config: 2012-01-03-a for VVFS:DMP1:107 Added Logic: 2012-01-03-a MEC logic and VVFS:DMP1:107 mpsConfiguration-R1-103: Added Config: 2011-11-29-a which fixes A-Line Kicker ON/OFF read back strings Added Logic: 2011-11-29-a and 2011-11-15-b for MEC logic mpsConfiguration-R1-102: Add Logic: 2011-11-15-a and 2011-11-15-b for new CXI and MEC logic, "b" includes logic for HXRSS full installation. Add Config: 2011-11-15-a for A-Link Kicker Pulser Status, inputs not added to logic input list mpsConfiguration-R1-101: Add Logic: 2011-11-07-a and 2011-11-07-b for HXRSS Add Config: 2011-11-07-a for MEC and CXI Logic corrects "BXG is On" 0 bit input error which was set to BEND_IN20_751_OFF, corrected it to be BEND_IN20_231_OFF. mpsConfiguration-R1-100: Add Logic: 2011-10-31-a and 2011-10-31-b for HXRSS Add Config: 2011-10-31-a for HXRSS mpsConfiguration-R1-99: Add Logic: 2011-09-19-a for MEX and XPP mpsConfiguration-R1-98: Add Config: 2011-09-12-a per MEC mpsConfiguration-R1-97: -- Add Config: 2011-08-26-a to set Detector Pad Faults autorecovery to False mpsConfiguration-R1-96: -- Add Logic: 2011-08-10-a Fixed error in M3H Ignore logic definitions. mpsConfiguration-R1-95: -- Logic: 2011-08-09-a ---- Changes for Mark Arndt in MEC, XPP, and CXI mpsConfiguration-R1-94: -- Logic: 2011-08-01-a ---- Added updated BYKICK Readback Logic to ignore when D2 is IN -- Config: 2011-08-01-a ----Changes for Mark Arndt in Config mpsConfiguration-R1-93: -- Logic: 2011-07-12-a -- Config: 2011-07-12-a -- Changes for CXI per Mark Arndt mpsConfiguration-R1-92: -- Logic: 2011-07-05-a -- Config: 2011-07-05-a -- Additional ignore devices for UM6; DG2; XCS devices; add new devices for upcoming runs mpsConfiguration-R1-91: -- Logic: 2011-06-28-a -- Config: 2011-06-15-a -- New XCS logic; remove some obsolete NEH and XCS logic mpsConfiguration-R1-90: -- Logic: 2011-06-17-a -- Config: 2011-06-15-a -- Fix bug introduced in mpsConfiguration-R1-88 mpsConfiguration-R1-89: **Bug in this version; DO NOT USE** -- Logic: 2011-06-16-a -- Config: 2011-06-15-a -- Fix bug introduced in mpsConfiguration-R1-88 mpsConfiguration-R1-88: **Bug in this version; DO NOT USE** -- Logic: 2011-06-15-a -- Config: 2011-06-15-a -- Add XPP truth table and ignore condition. Add XCS inputs. Cleanup: remove obsolete XRT input and CXI logic remove obsolete FEE stopper inputs mpsConfiguration-R1-87: -Logic 2011-05-31-a --Add 2 new XPP logic tables -Logic 2011-05-26-a -- Add new CXI Logic -- Add new MEC Logic -- Add D2 Logic and D2 Ignore Device Logic -- Change Valve Logic to include D2 and TD11 Ignore Logic per Iverson -Databse 2011-05-26-a --Remove Extra B921 ST1_ST2 Inputs that never were used. Real status comes from B950. -Logic 2011-05-25-a *IMPORTANT IMPORTANT IMPORTANT NOTE: reverted back to logic 2010-09-28-a because everything in logic sqlite filse from then till now was malformed. Recreated all logic changes so that logic 2011-02-26-a and 2011-05-25-a are equivalent, but 2011-05-25-a has db issues resolve and extra S5 Position Logic. Added AutoIncroment to sqlite Mpslogic.mpl tables. mpsConfiguration-R1-86: -config: 2011-05-11-a --Add support new inputs and for CXI --Add RTD summary past BSY D2 inputs mpsConfiguration-R1-85: -config: 2011-05-04-a --Add support new inputs and for CXI --Add D2 inputs mpsConfiguration-R1-84: -Should not be used mpsConfiguration-R1-83: -Logic: 2011-02-26-a -config: 2011-02-26-a --Add support for soft input for CXI CS-PAD-Damage Fault and reverted logic back for CXI Configuration 4 Summary. mpsConfiguration-R1-82: -Logic: 2011-02-25-a -- Per Mark Arndt and CXI request, temporarily changed CXI MPS CFG 4 CONFID logic from "CXI Configuration 4 Summary" to "CXI CS-PAD-Damage Fault". Changes should be backed out when CXI changes can support a proper protection design. Logic for "CXI Configuration 4 Summary" should revert back to logic 2011-2-2-a when needed. mpsConfiguration-R1-81: -Deactivate logic for BSY Prof PR1_2, 50PR3, and PR2 per Iverson. Added BSY PIC HV per Sony. mpsConfiguration-R1-80: -Add logic and database "2011-01-08-a" to change PV name of input and sway states. mpsConfiguration-R1-79: -Add logic 2010-12-06-a (for CXI Config 1-7 and PLC_OK Status logic) mpsConfiguration-R1-78: -Add database 2010-12-01-a for CXI -Add logic 2010-12-01-a for CXI - Removed extra HXX:MXT:VGC_01:OPN_DI Position input and removed from logic mpsConfiguration-R1-77: -Add database 2010-11-29-a for CXI (built from database 2010-09-28-a) -Add logic 2010-11-29-a for CXI mpsConfiguration-R1-76: -Add database 2010-11-22-b for CXI (built from database 2010-09-28-a) mpsConfiguration-R1-75: -Add database 2010-11-22-a for CXI mpsConfiguration-R1-74: - Add database 2010-09-28-a (Changed name of TRHZ:DMP1:310 to THZR:DMP1:350) - Add logic 2010-09-28-a (same as above) mpsConfiguration-R1-73: - Add database 2010-09-24 (added VVMG-DMP1-743) - Add logic 2010-09-24 (added VVMG-DMP1-743, remove BSY Fast Gauges and BSYA B11) mpsConfiguration-R1-72: - Update which CONFIG and LOGIC to build in top level Makefile (should have been included in R1-71) mpsConfiguration-R1-71: - New database and logic 2010-08-30-a. Add NEH AMO End Station Ready; Set NEH2 HXRAY StrongBack 1 Isolation Valve to inactive" - Builds database 2010-08-17a and 2010-08-30-a - Builds logic 2010-08-17a and 2010-08-30a mpsConfiguration-R1-70: - New databaseand logic 2010-08-17-a. (added BYKICK watchdog) mpsConfiguration-R1-69: - New database 2010-08-11-a, logic 2010-08-11-a (Add PICM:BSYA:1701A,1701B) mpsConfiguration-R1-68: - New database 2010-08-10-a mpsConfiguration-R1-67: - New logic 2010-08-09-a (BSYA devices ignore BYKICK) mpsConfiguration-R1-66: - Fixed double BSYA devices - Added logic for BSYA Prof and BSYA PIC ignore on B1/B2 mpsConfiguration-R1-65: - Added BSYA devices mpsConfiguration-R1-64: - Made BSY PIC inputs latching - Added mpslogic_create_pic_patch.py application mpsConfiguration-R1-63: - Corrects CE11 flowswitch input and logic mpsConfiguration-R1-62: - Added PIC inputs to LN 25 - Added PIC logic for LN 11, 16, and 22 mpsConfiguration-R1-61: - Added NO_TRIG inputs to LN 11, 16, and 22 mpsConfiguration-R1-60: - Removed PIC autorecover mpsConfiguration-R1-59: - Removed PICs from LN 23, 25, and 26 mpsConfiguration-R1-58: - Corrected Link Node types mpsConfiguration-R1-57: - Added PIC inputs mpsConfiguration-R1-56: - Updated photon section inputs mpsConfiguration-R1-55: - New configurations, 2010-03-23-a, 2010-03-29-a - New logic 2010-03-30-a mpsConfiguration-R1-54: - New configuration, 2010-03-16-a mpsConfiguration-R1-53: - Alg common uses mps-R1-0-0 mpsConfiguration-R1-52: - New unlatch PVs - New algorithm wrapper to use latched values - New EDM displays - Better Makefiles reduce number of products built - Replaced deprecated Python code (os.popen) - Split up mpsconfig Python module. Easier to modify, understand. mpsConfiguration-R1-51: - Updated channel mapping - Updated BASII stopper logic to use new channel mapping mpsConfiguration-R1-50: - TIMING_STABLE logic added - TIU inputs added to logic mpsConfiguration-R1-49: - TIMING_STABLE input added - BPM BYKIK input (27/1/14) is now a latching fault mpsConfiguration-R1-48: - Rate request logic for BYKIK and Pockels Cell - Rate requests include burst and single shot modes for BYKIK and Pockels cell mpsConfiguration-R1-47: - Added 1553 logic - Added rate request logic and inputs mpsConfiguration-R1-46: - Updated AMO logic - Updated MPS configuration mpsConfiguration-R1-45: - Added AMO logic mpsConfiguration-R1-44: - Added AMO inputs and stopper S1 in status mpsConfiguration-R1-43: - Added AMO inputs and stopper S1 in status mpsConfiguration-R1-42: - Added "Phase Two Alpha" FEE and NEH inputs and logic mpsConfiguration-R1-41: - Added PIC/BLM watchdog faults mpsConfiguration-R1-40: - Removed ignore cases from ST1/ST2 B4C protection logic mpsConfiguration-R1-39: - Added B4C/ST1ST2 logic mpsConfiguration-R1-38: - Added FEE logic, moved ST1 ST2 inputs to different card mpsConfiguration-R1-37: - Moved LN 38/4 to 38/3 to match reality mpsConfiguration-R1-36: - Added FEE phase 1 inputs mpsConfiguration-R1-35: - Remapped LTU PIC inputs - Removed masking of LTU PICS on TDUND mpsConfiguration-R1-34: - PICM 732 latches - Update to EPICS fault latching mpsConfiguration-R1-33: - Better fault numbering mpsConfiguration-R1-32: - Added LN28/29 PICs mpsConfiguration-R1-31: - Bypass recover internal input and logic mpsConfiguration-R1-30: - Moved BFW 1010 In from 33/1/13 to 32/1/12 mpsConfiguration-R1-29: - Renamed BFW inputs mpsConfiguration-R1-28: - Removed EPICS BFW inputs mpsConfiguration-R1-27: - Added PIC inputs mpsConfiguration-R1-26: - Moved BFW 1810 and 2610 to non-card-1-chan-13 inputs mpsConfiguration-R1-25: - Pockels Cell AND Gate TT no longer affects LHS - Uses hardwired BFW In status mpsConfiguration-R1-24: - Added LN34 no trig input mpsConfiguration-R1-23: - Added LN34 PICs mpsConfiguration-R1-22: - Added BTM summary fault PV mpsConfiguration-R1-21: - Removed many PV faults mpsConfiguration-R1-20: - Added BFW In PV faults mpsConfiguration-R1-19: - Corrected magnet PV names mpsConfiguration-R1-18: - Added magnet PV faults mpsConfiguration-R1-17: - Added OTR 621 logic mpsConfiguration-R1-16: - Added OTR/TDUND logic mpsConfiguration-R1-15: - Added BLM:LTU1:980 to algorithm 2009-04-03-a mpsConfiguration-R1-14: - New algorithms with much more BLM logic mpsConfiguration-R1-13: - Moved VVMG:LTU1:505 from LN29-01-13 to LN29-01-03 mpsConfiguration-R1-12: - New algorithm and configuration to handle laser AND gate mpsConfiguration-R1-11: - Added many BLM and BLM HVPS inputs - Added new shutter inputs - Better documentation export - New algorithm wrapper - New MPS Logic mpsConfiguration-R1-10: - Added BLM channels for link nodes 30, 32, 33, 35, and 37. - Changed LN36's BLM names to match the new channels. - Shifted LN10's card 2 channels up by one channel number. - Updated database/current to 2009-02-26-a mpsConfiguration-R1-9: - New algorithm export format. Initializes rates to 120 Hz. mpsConfiguration-R1-8: - New algorithm export format mpsConfiguration-R1-7: - New handwritten algorithm 2009-02-20-c mpsConfiguration-R1-6: - Ignore logic inverted mpsConfiguration-R1-5: - Algorithm fixes laser heater logic mpsConfiguration-R1-4: - Added new DB with four new PV inputs (BP01-BP04) - New MPS logic created to use these inputs - New SNL output. mpsConfiguration-R1-3: - Removed BFW 110 EPICS channel from config DB. mpsConfiguration-R1-2: - Algorithm 2009-02-18-a modified to remove more EPICS dependencies. mpsConfiguration-R1-1: - Algorithm 2009-02-18-a added. Removes dependency on EPICSs status. mpsConfiguration-R1-0: - Initial version