#BLM LN30 MPS Link Node startup script wdStart(20) chdir("../..") ld("bin/RTEMS-uC5282/mpsLinkNode.obj") # note: you can substitute getbenv for bsp_getbenv for AUTOBOOT, but not for # others... mpsReadBenvFactory(bsp_getbenv("FACTORY")) mpsReadBenvRevision(bsp_getbenv("REVISION")) mpsReadBenvSerial(bsp_getbenv("SERIAL")) mpsReadBenvConsole(bsp_getbenv("CONSOLE")) mpsReadBenvKernel(bsp_getbenv("KERNEL")) mpsReadBenvKernelArgs(bsp_getbenv("KERNEL_ARGS")) mpsReadBenvHWAddr0(bsp_getbenv("HWADDR0")) mpsReadBenvFirmware(bsp_getbenv("FW_VERSION")) mpsReadBenvStartPoint(bsp_getbenv("_0")) mpsReadBenvRAMImage(bsp_getbenv("RAMIMAGE")) mpsReadBenvCache(bsp_getbenv("CACHE")) mpsReadBenvAutoboot(bsp_getbenv("AUTOBOOT")) mpsReadBenvBootpEnable(bsp_getbenv("BP_ENBL")) ## /data now mapped by pre... nfsMountsShow() ## Register all support components dbLoadDatabase("dbd/mpsLinkNode.dbd",0,0) mpsLinkNode_registerRecordDeviceDriver(pdbbase) #rtems_gdb_start(0,0) can't call this, if you don't load the obj. ## Load record instances... substr=malloc(500) #freed before iocInit() ## Link node ID is used to determine which database to load. ## Link node ID is set with rotary switch on the circuit board. ## There are two rotaries: ## "ID2" is the higher byte; ## "ID1" is the lower byte. ## They are in HEXADECIMAL ## This value is accessible via memory mapped I/O register, but ## hardware initialization must be done in order to read it, so ## instead of doing hardware init via iocInit, it MUST be done here mpsInitialise() ## At this point Link node ID is known. Override if necess # BLM LN 30 mpsSetLinkNodeID(30) # "30" is configured to be BLM link node type sprintf(substr,"db/mps%s%s.template",mpsGetLinkNodeLOCA(),mpsGetLinkNodeUNIT()) printf("%s\n",substr) dbLoadTemplate(substr) sprintf(substr,"db/mps%s%s.blm_ln30_template",mpsGetLinkNodeLOCA(),mpsGetLinkNod eUNIT()) printf("%s\n",substr) dbLoadTemplate(substr) sprintf(substr,"IOC=EIOC:%s:%s,ENGINEER=Dayle Kotturi",mpsGetLinkNodeLOCA(),mpsGetLinkNodeUNIT()) dbLoadRecords("db/iocAdmin.db",substr) drvMpsFlag = 0 drvMpsLinkNodeTypeFlag = 0 drvMpsGetADCFlag = 0 drvMpsSetDebounceFlag = 0 drvMpsSetDebounceTimeRegFlag = 0 drvMpsGetADCFlag = 0 drvMpsSetBLMHVFlag = 0 drvMpsGetBLMHVFlag = 0 drvMpsSetDeadManFlag = 0 drvMpsSetDeadManRegFlag = 0 drvMpsGetDeadManRegFlag = 0 drvMpsGetDebounceFlag = 0 drvMpsGetLatchedRegFlag = 0 drvMpsGetFlag = 0 drvMpsParseXMLFlag = 0 drvMpsParseChannelsConfigFlag = 0 drvMpsParseNodeConfigFlag = 0 drvMpsGetADCDiagnosticFlag = 0 drvMpsGetQADCBeamDoseFlag = 0 drvMpsGetQADCTestDoseFlag = 0 drvMpsRegistersFlag = 0 devBiMpsFlag = 0 devBoMpsFlag = 0 devAiMpsFlag = 0 devAoMpsFlag = 0 devLonginMpsFlag = 0 devLongoutMpsFlag = 0 devStringinMpsFlag = 0 devWaveformMpsFlag = 0 # autosave/restore settings # From http://www.aps.anl.gov/bcda/synApps/autosave/autoSaveRestore_R4-4.html, # you must load save_restoreStatus.db with same prefix to be able to use this. # save_restore.c, it uses this prefix to find status, hearbeat, statusStr, recentlyStr, rebootStatus, ... #sprintf(substr,"EIOC:%s:%s",mpsGetLinkNodeLOCA(),mpsGetLinkNodeUNIT()) #printf("%s\n",substr) #save_restoreSet_status_prefix(substr) save_restoreSet_IncompleteSetsOk(1) save_restoreSet_DatedBackupFiles(1) nfsMountsShow() # 7/7/9 in development, /data = $IOC_DATA/lclsdev-12 # MPS Link Node layout sprintf(substr,"/data/lab-blm/autosave-req") set_requestfile_path(substr) set_savefile_path("/data/lab-blm","autosave") ## ============================================== ## New method for autosave and restore ## Decide what is saved by specifying it in the ## EPICS databases ## ============================================= #set_pass0_restoreFile("info_positions.sav") set_pass0_restoreFile("info_settings.sav") set_pass1_restoreFile("info_settings.sav") ## ============================================= ## Load Access Security File ## caPutLog now depends on this running. #asSetFilename("db/mpsLinkNode.acf") # IF MOUNT POINT GOES BACK, USE: for all 6 cases #mpsReadDatabaseVersion("/boot/epics/iocTop/MachineProtection/mpsConfiguration/database/current") # WHILE /boot is /afs/slac... mpsReadDatabaseVersion("/boot/g/lcls/epics/iocTop/MachineProtection/mpsConfiguration/database/current") #drvMpsParseDebounceConfigFlag=4 # 12/19/8: out. This .csv file no longer exported from sql. get mappings # from LinkNodeChannel.csv #sprintf(substr,"/boot/g/lcls/epics/iocTop/MachineProtection/mpsConfiguration/database/%s/csv/LinkNodeDebounce.csv",mpsGetDatabaseVersion()) #printf("%s\n",substr) #mpsParseDebounceConfig(substr) # Need to read link_node_type_enum for this link_node_id to know what type it is sprintf(substr,"/boot/g/lcls/epics/iocTop/MachineProtection/mpsConfiguration/database/%s/csv/LinkNode.csv",mpsGetDatabaseVersion()) printf("%s\n",substr) mpsParseNodeConfig(substr) sprintf(substr,"/boot/g/lcls/epics/iocTop/MachineProtection/mpsConfiguration/database/%s/csv/LinkNodeChannel.csv",mpsGetDatabaseVersion()) printf("%s\n",substr) mpsParseChannelsConfig(substr) sprintf(substr,"/boot/g/lcls/epics/iocTop/MachineProtection/mpsConfiguration/database/%s/csv/LinkNodeRack.csv",mpsGetDatabaseVersion()) printf("%s\n",substr) mpsParseNodeRackConfig(substr) iocInit() ## ===================================================== ## Turn on caPutLogging: ## Log values only on change to the iocLogServer: #caPutLogInit("172.27.8.31:7004") #caPutLogShow(2) ## =========================================================== ## Start autosave routines to save our data ## =========================================================== # optional, needed if the IOC takes a very long time to boot. epicsThreadSleep(1.0) ## Handle autosave 'commands' contained in loaded databases. # change directory to ioc startup area to run makeAutosaveFiles() chdir("/data/lab-blm/autosave-req") iocshCmd("makeAutosaveFiles()") ## Explaining the difference: even though there is only field line added ## to the record, it is used in two ways. First, on pass0, the positions ## are saved at the rate of 5 sec. Why you would want to do this more ## than once escapes me. Second, you save the the settings every 30 sec ## to a file (if they change more freq, the values are kept in RAM !? ## Eg. create_monitor_set("info_positions.req", 5, "U=USEG:UND1:150:") # 2/2/2009 deliberately leaving off last argument... create_monitor_set("info_settings.req", 30, "U=") free(substr)