#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):DeviceDna") { field(DTYP, "asynInt32") field(DESC, "Xilinx Device DNA") field(PINI, "YES") field(SCAN, "Passive") field(INP, "@asyn($(PORT),0)STAT:DeviceDna") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):FpgaVersion") { field(DTYP, "asynInt32") field(DESC, "FPGA Firmware Version Number") field(PINI, "YES") field(SCAN, "Passive") field(INP, "@asyn($(PORT),0)STAT:FpgaVersion") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):UpTimeCnt") { field(DTYP, "asynInt32") field(DESC, "Seconds since last reset") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)STAT:UpTimeCnt") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):DeviceId") { field(DTYP, "asynInt32") field(DESC, "Device Identification") field(PINI, "YES") field(SCAN, "Passive") field(INP, "@asyn($(PORT),0)STAT:DeviceId") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):BuildStamp") { field(DTYP, "asynInt32") field(DESC, "FPGA Build Stamp") field(PINI, "YES") field(SCAN, "Passive") field(INP, "@asyn($(PORT),0)STAT:BuildStamp") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):ScratchPad") { field(DTYP, "asynInt32") field(DESC, "Register to test R/W") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1):ScratchPad") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):ClkSel") { field(DTYP, "asynInt32") field(DESC, "Select between LCLS-I/II timing") field(PINI, "YES") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)TIME:ClkSel") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):RxPolarity") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)BSA:RxPolarity") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):PhaseTarget") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)BSA:PhaseTarget") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):AppType") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)CONF:AppType") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):CalibEnable") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)CONF:CalibEnable") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):Location") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)CONF:Location") }#================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):ScratchPadRBV") { field(DTYP, "asynInt32") field(DESC, "Register to test R/W") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1):ScratchPad") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):ClkSelRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)TIME:ClkSel") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):RxPolarityRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)BSA:RxPolarity") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):PhaseTargetRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)BSA:PhaseTarget") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):AppTypeRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)CONF:AppType") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):CalibEnableRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)CONF:CalibEnable") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):LocationRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)CONF:Location") }