#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):DeviceDna") { field(DTYP, "asynInt32") field(DESC, "Xilinx Device DNA") field(PINI, "YES") field(SCAN, "Passive") field(INP, "@asyn($(PORT),0)DeviceDna") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):FpgaVersion") { field(DTYP, "asynInt32") field(DESC, "FPGA Firmware Version Number") field(PINI, "YES") field(SCAN, "Passive") field(INP, "@asyn($(PORT),0)FpgaVersion") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):UpTimeCnt") { field(DTYP, "asynInt32") field(DESC, "Seconds since last reset") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)UpTimeCnt") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):DeviceId") { field(DTYP, "asynInt32") field(DESC, "Device Identification") field(PINI, "YES") field(SCAN, "Passive") field(INP, "@asyn($(PORT),0)DeviceId") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):SrvRemotePortSwap") { field(DTYP, "asynInt32") field(DESC, "big-Endian configuration") field(PINI, "YES") field(SCAN, "Passive") field(INP, "@asyn($(PORT),0)ServerRemotePort") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):SrvRemoteIp") { field(DTYP, "asynInt32") field(DESC, "big-Endian configuration") field(PINI, "YES") field(SCAN, "Passive") field(INP, "@asyn($(PORT),0)ServerRemoteIp") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):SofCount") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)sofCount") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):EofCount") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)eofCount") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):CrcErrCount") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)CrcErrCount") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):RxClkCount") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)RxClkCount") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):RxRstCount") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)RxRstCount") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):RxDecErrCount") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)RxDecErrCount") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):RxDspErrCount") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)RxDspErrCount") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):RxLinkUp") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)RxLinkUp") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):TmitTimeUp") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)TmitTimeUp") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):TmitTimeLow") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)TmitTimeLow") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):TmitStatus0") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)TmitStatus0") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):TmitStatus1") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)TmitStatus1") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):TmitTmit0") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)TmitTmit0") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):TmitTmit1") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)TmitTmit1") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):LclTimeUp") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)LclTimeUp") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):LclTimeLow") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)LclTimeLow") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):TmitInvalid") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)TmitInvalid") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):TmitSmall") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)TmitSmall") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):StatusOfBsa0") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)StatusOfBsa0") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):StatusOfBsa1") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)StatusOfBsa1") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):StatusOfBsa2") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)StatusOfBsa2") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):StatusLimitSw") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)StatusLimitSwitches") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):Inserted") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)Inserted") }#================================================================== # Record example for an IntField, RO, 1 element, no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(longin, "$(P):Removed") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),0)Removed") }#================================================================== # Record example for an IntField, RO, N elements, no encoding, # 8-bit register. # It is a longin record with type asynOctetRead. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RO, without encoding is 0. #================================================================== record(waveform, "$(P):BuildStamp") { field(DTYP, "asynOctetRead") field(DESC, "Firmware Build String") field(PINI, "YES") field(SCAN, "Passive") field(NELM, "256") field(FTVL, "CHAR") field(INP, "@asyn($(PORT),0)BuildStamp") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):ScratchPad") { field(DTYP, "asynInt32") field(DESC, "Register to test R/W") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)ScratchPad") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):RxPolarity") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)RxPolarity") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):PhaseTarget") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)PhaseTarget") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):AppType") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)AppType") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):CalibEnable") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)CalibEnable") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):Location") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)Location") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):SelBpm") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)SelBpm") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):TreshTmit") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)TreshTmit") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):MoverOnOff") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)MoverOnOff") }#================================================================== # Record example for an IntField, RW, 1 element, no encoding register. # It is a longout record with type asynInt32. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longout, "$(P):IgnoreMover") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),1)IgnoreMover") }#================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):ScratchPadRBV") { field(DTYP, "asynInt32") field(DESC, "Register to test R/W") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)ScratchPad") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):ClkSelRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)ClkSel") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):RxPolarityRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)RxPolarity") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):PhaseTargetRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)PhaseTarget") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):AppTypeRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)AppType") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):CalibEnableRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)CalibEnable") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):LocationRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)Location") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):SelBpmRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)SelBpm") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):TreshTmitRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)TreshTmit") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):MoverOnOffRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)MoverOnOff") } #================================================================== # Record example for reading back from an IntField, RW, 1 element, # no encoding register. # It is a longin record with type asynInt32. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, without encoding is 1. #================================================================== record(longin, "$(P):IgnoreMoverRBV") { field(DTYP, "asynInt32") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),1)IgnoreMover") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation0") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation0") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation1") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation1") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation2") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation2") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation3") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation3") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation4") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation4") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation5") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation5") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation6") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation6") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation7") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation7") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation8") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation8") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation9") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation9") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation10") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation10") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation11") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation11") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation12") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation12") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation13") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation13") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation14") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation14") } #================================================================== # Record example for an IntField, RW, 1 element, IEEE_754 encoding # register. # It is an ao record with type asynFloat64. # The OUT field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ao, "$(P):Attenuation15") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "NO") field(SCAN, "Passive") field(OUT, "@asyn($(PORT),3)Attenuation15") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation0RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation0") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation1RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation1") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation2RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation2") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation3RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation3") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation4RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation4") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation5RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation5") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation6RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation6") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation7RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation7") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation8RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation8") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation9RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation9") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation10RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation10") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation11RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation11") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation12RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation12") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation13RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation13") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation14RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation14") } #================================================================== # Record example for reading back an IntField, RW, 1 element, # IEEE_754 encoding register. # It is an ai record with type asynFloat64. # The INP field has the form @asyn(PORT,ADDR)PARAM where: # - PORT : The asyn port name. It must match the port name given # when calling "YCPSWASYNConfig" on st.cmd # - PARAM : The asyn paramter name. It must be defined in the # dictionary file and assigned to a register. # - ADDR : Addrres based on the type of register. # For IntField, RW, with IEEE_754 encoding is 3. #================================================================== record(ai, "$(P):Attenuation15RBV") { field(DTYP, "asynFloat64") field(DESC, "") field(PINI, "YES") field(SCAN, "1 second") field(INP, "@asyn($(PORT),3)Attenuation15") }