#! Generated by VisualDCT v2.5
#! DBDSTART
#! DBD("../../dbd/bcs.dbd")
#! DBDEND



record(ai, "$(dev):$(sec)") {
  field(SCAN, ".1 second")
  field(DTYP, "Hytec IP-ADC-8413")
  field(INP, "@$(card):$(ch):DATA")
  field(PREC, "3")
  field(LINR, "LINEAR")
  field(EGUF, "10.0")
  field(EGUL, "-10.0")
  field(EGU, "$(egu)")
  field(HOPR, "10")
  field(LOPR, "-10")
  field(DESC, "$(desc)")
  field(HIHI, "$(hihi)")
  field(HIGH, "$(high=0)")
# If $(high) is defined and not 0, HSV is MINOR, otherwise it's NO_ALARM
# This is for backwards compatability with PICs that only use one alarm level.
  field(HSV,  "$(hsv$(high=0)=MINOR,hsv0=NO_ALARM)")
  field(LOLO, "$(lolo)")
# If $(high) is defined and not 0, HHSV is MAJOR, otherwise it's MINOR
# This is for backwards compatability with PICs that only use one alarm
# Is there a good reason it was defined as MINOR?
  field(HHSV, "$(hsv$(high=0)=MAJOR,hsv0=MINOR)")
  field(LLSV, "MAJOR")
}

#! Further lines contain data used by VisualDCT
#! View(0,0,1.0)
#! Record("$(dev):$(sec)",20,35,0,0,"$(dev):$(sec)")
