diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..c8c2c52 --- /dev/null +++ b/.gitignore @@ -0,0 +1,17 @@ +*~ +O.* +*.log +*.swp +bin/ +cfg/ +db/ +dbd/ +display/ +html/ +include/ +lib/ +templates/ +cdCommands +envPaths +RELEASE_SITE +tags diff --git a/configure/CONFIG_SITE b/configure/CONFIG_SITE new file mode 100644 index 0000000..a5b0c75 --- /dev/null +++ b/configure/CONFIG_SITE @@ -0,0 +1,31 @@ +# CONFIG_SITE + +# Make any application-specific changes to the EPICS build +# configuration variables in this file. +# +# Host/target specific settings can be specified in files named +# CONFIG_SITE.$(EPICS_HOST_ARCH).Common +# CONFIG_SITE.Common.$(T_A) +# CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A) + +# Set this when you only want to compile this application +# for a subset of the cross-compiled target architectures +# that Base is built for. +#CROSS_COMPILER_TARGET_ARCHS += RTEMS-uC5282 +#CROSS_COMPILER_TARGET_ARCHS += RTEMS-pc586 +#CROSS_COMPILER_TARGET_ARCHS += RTEMS-beatnik +#CROSS_COMPILER_TARGET_ARCHS += linux-x86 +#CROSS_COMPILER_TARGET_ARCHS += linux-x86_64 +#BUILD_FOR_HOST_ARCH = + +# Set this when your IOC and the host use different paths +# to access the application. This will be needed to boot +# from a Microsoft FTP server or with some NFS mounts. +# You must rebuild in the iocBoot directory for this to +# take effect. +#IOCS_APPL_TOP = + +# If you don't want to install into $(TOP) then +# define INSTALL_LOCATION here +#INSTALL_LOCATION= + diff --git a/configure/RELEASE b/configure/RELEASE index 5c653d3..f32a656 100644 --- a/configure/RELEASE +++ b/configure/RELEASE @@ -1,22 +1,17 @@ -#RELEASE Location of external products +# RELEASE +# Defines location of external products # Run "gnumake clean uninstall install" in the application # top directory each time this file is changed. +-include $(TOP)/configure/RELEASE.local -TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top +# Check for valid macro definitions for module release directories +# You can add tests here to make sure RELEASE.local defined valid +# macros for all the module dependencies +#ifeq ($(wildcard $(EPICS_BASE)/include),) +#$(error Invalid EPICS_BASE: $(EPICS_BASE)) +#endif +#ifeq ($(wildcard $(ASYN)/include),) +#$(error Invalid ASYN: $(ASYN)) +#endif +#... -SUPPORT=/home/oxygen/MOONEY/epics/synAppsSVN/support --include $(TOP)/../configure/SUPPORT.$(EPICS_HOST_ARCH) - -#If using the sequencer, point SNCSEQ at its top directory: -SNCSEQ=$(SUPPORT)/seq-2-1-2 - -# For serial support -ASYN=$(SUPPORT)/asyn-4-17 - -# EPICS_BASE usually appears last so other apps can override stuff: -EPICS_BASE=/home/oxygen/MOONEY/epics/base-3.14.12.1 --include $(TOP)/../configure/EPICS_BASE.$(EPICS_HOST_ARCH) - -#Capfast users may need the following definitions -#CAPFAST_TEMPLATES= -#SCH2EDIF_PATH= diff --git a/configure/RELEASE.local b/configure/RELEASE.local new file mode 100644 index 0000000..cf99108 --- /dev/null +++ b/configure/RELEASE.local @@ -0,0 +1,39 @@ +# RELEASE.local +# +# Read definitions of: +# EPICS_SITE_TOP +# BASE_MODULE_VERSION +# EPICS_MODULES +# from one of the following options +-include $(TOP)/../../RELEASE_SITE +-include $(TOP)/RELEASE_SITE + +# Check that EPICS_MODULES was defined in a RELEASE_SITE file +-include $(TOP)/../../RELEASE_SITE.check + +# ========================================================== +# Define the version strings for all needed modules +# Use naming pattern: +# FOO_MODULE_VERSION = R1.2 +# so scripts can extract version strings +# Don't set your version to anything such as "test" that +# could match a directory name. +# ========================================================== +SEQ_MODULE_VERSION=R2.2.4-1.0 +ASYN_MODULE_VERSION=R4.30-1.1.1 + +# ========================================================== +# Define module paths using pattern +# FOO = $(EPICS_MODULES)/foo/$(FOO_MODULE_VERSION) +# or +# FOO = /Full/Path/To/Development/Version +# ========================================================== +SNCSEQ=$(EPICS_MODULES)/seq/$(SEQ_MODULE_VERSION) +ASYN=$(EPICS_MODULES)/asyn/$(ASYN_MODULE_VERSION) + +# Set EPICS_BASE last so it appears last in the DB, DBD, INCLUDE, and LIB search paths +EPICS_BASE = $(EPICS_SITE_TOP)/base/$(BASE_MODULE_VERSION) + +# Check for undefined EPICS_BASE +-include $(TOP)/../../EPICS_BASE.check + diff --git a/configure/RELEASE.win32-x86 b/configure/RELEASE.win32-x86 new file mode 100644 index 0000000..b3a1bb7 --- /dev/null +++ b/configure/RELEASE.win32-x86 @@ -0,0 +1,17 @@ +#RELEASE Location of external products +# Run "gnumake clean uninstall install" in the application +# top directory each time this file is changed. + +TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top + +#If using the sequencer, point SNCSEQ at its top directory: +#SNCSEQ=/corvette/home/epics/synApps5-1/seq/2-0-8 + +ASYN=J:/epics/devel/asyn/4-4beta + +# EPICS_BASE usually appears last so other apps can override stuff: +EPICS_BASE=H:/epics/base-3.14.9beta + +#Capfast users may need the following definitions +#CAPFAST_TEMPLATES= +#SCH2EDIF_PATH= diff --git a/configure/RULES.archive b/configure/RULES.archive new file mode 100644 index 0000000..a8efb44 --- /dev/null +++ b/configure/RULES.archive @@ -0,0 +1,2 @@ +# RULES.archive +include $(EPICS_BASE)/configure/RULES.archive diff --git a/configure/RULES.autosave b/configure/RULES.autosave new file mode 100644 index 0000000..c3b5cb0 --- /dev/null +++ b/configure/RULES.autosave @@ -0,0 +1,2 @@ +# RULES.autosave +include $(EPICS_BASE)/configure/RULES.autosave diff --git a/configure/RULES.copy b/configure/RULES.copy new file mode 100644 index 0000000..6cf19e7 --- /dev/null +++ b/configure/RULES.copy @@ -0,0 +1,2 @@ +# RULES.copy +include $(EPICS_BASE)/configure/RULES.copy