R1.9.31 K. Luchini, 01/27/2023 (support event) - build agains fcom R1.9.31 R1.9.30 Kukhee Kim, 06/16/2003 (support evrClient) - build against fcom R1.9.30 R1.9.29 Kukhee Kim, 06/16/2002 (support event) - build against fcom R1.9.29 R1.9.28 Sonya Hoobler, 04/12/2022 - build against fcom R1.9.28 to be compatible with udpComm, allowing more open file descriptors R1.9.27 Kukhee Kim, 02/12/2021 (support evrClient) - build against fcom R1.9.27 R1.9.26 Kukhee Kim, 02/12/2021 (support event) - build against fcom R1.9.26 R1.9.25 Kukhee Kim, 09/14/2020 (support event) - build against fcom R1.9.25 - insert FEE1 into the original location of area list, to support un-updated photon iocs R1.9.24 Kukhee Kim, 03/10/2020 (support evrClient) - build against fcom R1.9.24 - apply new area names R1.9.23 Kukhee Kim, 03/10/2020 (support event) - build against fcom R1.9.21 - apply new area names R1.9.22 Kukhee Kim, 02/07/2020 (support evrClient) - build against fcom R1.9.22 R1.9.21 Kukhee Kim, 02/07/2020 (support envent) - build against fcom R1.9.21 R1.9.20 Kukhee Kim, 09/11/2019 (support evrClient) - build against fcom R1.9.20 R1.9.19 Kukhee Kim, 09/11/2019 (support event) - build against fcom R1.9.19 R1.9.18 Kukhee Kim, 11/16/2018 (support evrClient) - build against fcom R1.9.18 R1.9.17 Kukhee Kim, 11/16/2018 (support evnet) - build against fcom R1.9.17 R1.9.16 Kukhee Kim, 11/13/2018 - build against fcom R1.9.16 (support evrClient) R1.9.15 Kukhee Kim, 11/13/2018 - build against fcom R1.9.15 (spport evnet) R1.9.14 Kukhee Kim, 11/02/2018 - build against fcom R1.9.14 (support evrClient) R1.9.13 Kukhee Kim, 11/02/2018 - build against fcom R1.9.13 (support event) R1.9.12 Kukhee Kim, 10/16/2018 - build against fcom R1.9.12 (support evrClient) R1.9.11 Kukhee Kim, 10/16/2018 - build against fcom R1.9.11 (support event) R1.9.10 Kukhee Kim, 08/18/2018 - build against fcom R1.9.10 (support evrClient) R1.9.9: Kukhee Kim, 08/18/2018 - build against fcom R1.9.9 (support event module) R1.9.8: Kukhee Kim, 06/28/2018 - buid against fcom R1.9.8 (support evrClient module) R1.9.7: Kukhee Kim, 06/28/2018 - build against fcom R1.9.7 (support event module) R1.9.6: Kukhee Kim, 05/16/2018 - build against fcom R1.9.6 (support evrClient module) R1.9.5: Kukhee Kim, 05/16/2018 - build against fcom R1.9.5 (support evnet module) R1.9.4: Kukhee Kim, 05/10/2018 - build against fcom R1.9.4 R1.9.3: Straumann, 4/24/2018 - Build against fcom/R1.9.3 R1.9.2: Kukhee Kim, 04/18/2018 - Build against fcom/R1.9.2 R1.9.1: Marcio Donadio, 04/03/2018 - Build against fcom/R1.9.1 R1.9.0: kim, 3/28/2018 Build against fcom/R1.9.0 R1.8.0: straumann, 3/20/2018 Built against fcom/R1.8.0 R1.7.0: straumann, 3/20/2018 Added default implementation for HiResTicks based on clock_gettime() 3.15 had named events - try to convert pbo->evnt to an integer... Don't link full libFcomUtil to pv2fcid -- only relevant sources in order to avoid pulling in FCOM + UDPCOMM. R1.6.0: straumann, 3/20/2018 Built against fcom/R1.7.0 R1.5.0: hslepicka, 6/06/2017 Built against fcom/R1.6.0 and miscUtils/R2.2.5 R1.4.0: hslepicka, 2/21/2017 Built agains fcom/R1.5.0 R1.3.0: bhill, 1/26/2017 Updated to build w/ git workflow Built against fcom/R1.4.0 and miscutils/R2.2.4 fcomUtil-R1-2-3: sonya (07/20/2016) src/Makefile: Filter out all linux-x86 architectures when building pv2fcid IOC fcomUtil-R1-2-2: carolina (07/13/2016) Built against fcom-R1-3-35 as I need udpComm-R2-5-9-BR-3 As it required for event-R4-2-5 And exclude pv2fcid for Linux-x86 to build in epics base 14-12. fcomUtil-R1-1-37: bhill (06/11/2016) Built against fcom-R1-3-32 as I need udpComm-R2-7-0 Blob send part of drvFcom implemented and working. Still need to implement receive blob support. i.e. fcomGetBlobSet()" fcomUtil-R1-1-36: scondam (06/10/2016) Build against fcom-R1-3-33 which uses udpComm-R2-5-9-BR-2 fcomUtil-R1-1-34: khkim (12/02/2015) Build against fcom-R1-3-31 fcomUtil-R1-1-33: khkim (11/13/2015) Build against fcom-R1-3-30 fcomUtil-R1-1-32: bhill (09/04/2015) Build against fcom-R1-3-29 fcomUtil-R1-1-31: scondam (02/19/2015) Build against fcom-R1-3-28 fcomUtil-R1-1-30: kim (01/15/2015) Build against fcom-R1-3-27 fcomUtil-R1-1-29: scondam (11/11/2014) fcomUtil.c - Added "FB05" to end of area_ca[] Bumped up MAX_AREAS to 25. fcomUtil.h - Added FCOM_MASK_AREA_FB05 fcomUtil-R1-1-28: scondam (11/11/2014) Build with fcom-R1-3-26 fcomUtil-R1-1-27: luchini (04/15/2014) Build against fcom-R1-3-25 with event-R4-1-1 fcomUtil-R1-1-26: lpiccoli (02/20/2014) Build against fcom-R1-3-24 (with updated event module: event-R4-1-0) fcomUtil-R1-1-25: Re-build against fcom-R1-3-23 for the general audience Shantha Condamoor: 27-Feb-2014 fcomUtil-R1-1-24: Build against fcom-R1-3-21 Shantha Condamoor: 27-Feb-2014 For llrf6 which does not use fcom-R1-3-23 Add TCAV to detector list. fcomUtil-R1-1-23: Build against fcom-R1-3-23 fcomUtil-R1-1-22: Build against fcom-R1-3-22 fcomUtil-R1-1-21: Build against fcom-R1-3-21 fcomUtil-R1-1-20: Build against fcom-R1-3-20 fcomUtil-R1-1-19: Build against fcom-R1-3-19 fcomUtil-R1-1-18: Build against fcom-R1-3-18 fcomUtil-R1-1-17: Build against fcom-R1-3-17 fcomUtil-R1-1-16: Build against fcom-R1-3-16 fcomUtil-R1-1-15: Build MAIN_TRUNK against fcom + udpComm MAIN_TRUNK Build for all arches except vxworks fcomUtil-R1-1-14: Build against fcom-R1-3-14 fcomUtil-R1-1-13: Build against fcom-R1-3-13 fcomUtil-R1-1-12: fixed a duplicate define of FC_STAT_XANG_INVAL and changed debug print level to DP_ERROR fcomUtil-R1-1-11: changed to build against fcom-R1-3-12 --> udpComm-R2-3-0 -->event_R3-2-2-br_generaltime-2-2 fcomUtil-R1-1-10: changed to build against fcom-R1-3-11 --> udpComm-R2-2-2 -->event_R3-2-2-br_generaltime-2-2 fcomUtil-R1-1-9: changed to build against fcom-R1-3-10 --> udpComm-R2-2-1 -->event-R3-2-2-br_generaltime-2-1 fcomUtil-R1-1-8: changed to build against fcom-R1-3-9 --> udpComm-R2-2-0 -->event-R3-2-2-br_generaltime-2-0 fcomUtil-R1-1-7: changed to build against fcom-R1-3-8 --> udpComm-R2-1-6 -->event-R3-2-1-br_backprop-2-1 with base-R3-14-8-2-lcls6_p1 fcomUtil-R1-1-6: changed to build against fcom-R1-3-7 --> udpComm-R2-1-5 --> event-R3-2-2-br_generaltime-1-3 fcomUtil-R1-1-5: changed to build against fcom-R1-3-6 --> udpComm-R2-1-4 --> event-R3-2-2-br_generaltime-1-2 fcomUtil-R1-1-4: changed to build against fcom-R1-3-5 --> udpComm-R2-1-3 --> event-R3-2-2-br_generaltime-1-1 fcomUtil-R1-1-3: changed to build against fcom-R1-3-4 --> udpComm-R2-1-2 --> event-R3-2-2-br_generaltime-1-1 Also build against miscUtils-R2-2-2 fcomUtil-R1-1-2: changed to build against fcom-R1-3-3: due to bug fixes and enhancemmments to udpComm fcomUtil-R1-1-1: changed RF names ABSTR_ADES,_PDES, to ACCL:LI22:1:ADES/PDES and ACCL:LI25:1:ADES/PDES fcomUtil-R1-1-0: added new RF names ABSTR_ADES,_PDES, updated fcomLclsFFCtrl.h for 10 states max fcomUtil-R1-0-0: added area BSY0 (has erroneous BSY1) added include file fcomLclsFFCtrl.h fcomUtil-R0-5-1: added all RF PV names fcomUtil-R0-5-0: added some RF PV names fcomUtil-R0-4-3: Built against fcom-R1-3-2. fcomUtil-R0-4-2: Built against fcom-R1-3-1. fcomUtil-R0-4-1: Built against fcom-R1-3-0. fcomUtil-R0-4-0: Built against rtems 4.9.4 and EPICS BASE: base-R3-14-8-2-lcls6 fcomUtil-R0-3-3: src/Makefile: added 'pv2fcid' utility to convert PV names to FCOM IDs on linux fcomUtil-R0-3-2: new release to build in fcom-R1-0-0 changed BSY1 are define to BSY0 fcomUtil-R0-3-1: fixed RELEASE_SITE for production fcomUtil-R0-3-0: added fcomConvertSpecialCases to change 3 BPM names (internally) in order to get an fcomID BPMS:LTU1:910, BPMS:LTU1:960, BPMS:BSY0:1 dont' conform to fcom conventions fcomUtil-R0-2-0: Added utilities to DNS-lookup 2ndary NIC name. fcomUtil-R0-1-1: Built against rtems 4.9.3 and EPICS BASE: base-R3-14-8-2-lcls5 Initial production Release FcomUtil-R0-1-0: Initial, experimental release.