/* % Copyright (C) 2003 - 2016 GraphicsMagick Group % Copyright (C) 2002 ImageMagick Studio % % This program is covered by multiple licenses, which are described in % Copyright.txt. You should have received a copy of Copyright.txt with this % package; otherwise see http://www.graphicsmagick.org/www/Copyright.html. % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % % % % % % X X CCCC FFFFF % % X X C F % % X C FFF % % X X C F % % X X CCCC F % % % % % % Read GIMP XCF Image Format. % % % % % % Software Design % % Leonard Rosenthol % % November 2001 % % % % % % % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % */ /* Include declarations. */ #include "magick/studio.h" #include "magick/blob.h" #include "magick/pixel_cache.h" #include "magick/composite.h" #include "magick/log.h" #include "magick/magick.h" #include "magick/monitor.h" #include "magick/quantize.h" #include "magick/utility.h" /* Typedef declarations. */ typedef enum { GIMP_RGB, GIMP_GRAY, GIMP_INDEXED } GimpImageBaseType; typedef enum { PROP_END = 0, PROP_COLORMAP = 1, PROP_ACTIVE_LAYER = 2, PROP_ACTIVE_CHANNEL = 3, PROP_SELECTION = 4, PROP_FLOATING_SELECTION = 5, PROP_OPACITY = 6, PROP_MODE = 7, PROP_VISIBLE = 8, PROP_LINKED = 9, PROP_PRESERVE_TRANSPARENCY = 10, PROP_APPLY_MASK = 11, PROP_EDIT_MASK = 12, PROP_SHOW_MASK = 13, PROP_SHOW_MASKED = 14, PROP_OFFSETS = 15, PROP_COLOR = 16, PROP_COMPRESSION = 17, PROP_GUIDES = 18, PROP_RESOLUTION = 19, PROP_TATTOO = 20, PROP_PARASITES = 21, PROP_UNIT = 22, PROP_PATHS = 23, PROP_USER_UNIT = 24 } PropType; typedef enum { COMPRESS_NONE = 0, COMPRESS_RLE = 1, COMPRESS_ZLIB = 2, /* unused */ COMPRESS_FRACTAL = 3 /* unused */ } XcfCompressionType; typedef struct { magick_uint32_t width, height, image_type, bpp; /* BYTES per pixel!! */ int compression; /* not really part of the doc, but makes it easy to pass around! */ ExceptionInfo *exception; /* File size */ magick_off_t file_size; } XCFDocInfo; typedef struct { char name[1024]; unsigned int active; magick_uint32_t width, height, type, opacity, visible, linked, preserve_trans, apply_mask, show_mask, edit_mask, floating_offset; magick_int32_t offset_x, offset_y; magick_uint32_t mode, tattoo; Image *image; } XCFLayerInfo; #define TILE_WIDTH 64 #define TILE_HEIGHT 64 typedef struct { unsigned char red, green, blue, opacity; /* NOTE: reversed from IM! */ } XCFPixelPacket; /* %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % % % % % % I s X C F % % % % % % % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % Method IsXCF returns True if the image format type, identified by the % magick string, is XCF (GIMP native format). % % The format of the IsXCF method is: % % unsigned int IsXCF(const unsigned char *magick,const size_t length) % % A description of each parameter follows: % % o status: Method IsXCF returns True if the image format type is XCF. % % o magick: This string is generally the first few bytes of an image file % or blob. % % o length: Specifies the length of the magick string. % % */ static unsigned int IsXCF(const unsigned char *magick,const size_t length) { if (length < 8) return(False); if (LocaleNCompare((char *) magick,"gimp xcf",8) == 0) return(True); return(False); } typedef enum { GIMP_NORMAL_MODE, GIMP_DISSOLVE_MODE, GIMP_BEHIND_MODE, GIMP_MULTIPLY_MODE, GIMP_SCREEN_MODE, GIMP_OVERLAY_MODE, GIMP_DIFFERENCE_MODE, GIMP_ADDITION_MODE, GIMP_SUBTRACT_MODE, GIMP_DARKEN_ONLY_MODE, GIMP_LIGHTEN_ONLY_MODE, GIMP_HUE_MODE, GIMP_SATURATION_MODE, GIMP_COLOR_MODE, GIMP_VALUE_MODE, GIMP_DIVIDE_MODE, GIMP_DODGE_MODE, GIMP_BURN_MODE, GIMP_HARDLIGHT_MODE } GimpLayerModeEffects; /* Simple utility routine to convert between PSD blending modes and GraphicsMagick compositing operators */ static CompositeOperator GIMPBlendModeToCompositeOperator( unsigned int blendMode ) { switch ( blendMode ) { case GIMP_NORMAL_MODE: return( OverCompositeOp ); case GIMP_DISSOLVE_MODE: return( DissolveCompositeOp ); case GIMP_MULTIPLY_MODE: return( MultiplyCompositeOp ); case GIMP_SCREEN_MODE: return( ScreenCompositeOp ); case GIMP_OVERLAY_MODE: return( OverlayCompositeOp ); case GIMP_DIFFERENCE_MODE: return( DifferenceCompositeOp ); case GIMP_ADDITION_MODE: return( AddCompositeOp ); case GIMP_SUBTRACT_MODE: return( SubtractCompositeOp ); case GIMP_DARKEN_ONLY_MODE: return( DarkenCompositeOp ); case GIMP_LIGHTEN_ONLY_MODE:return( LightenCompositeOp ); case GIMP_HUE_MODE: return( HueCompositeOp ); case GIMP_SATURATION_MODE: return( SaturateCompositeOp ); case GIMP_COLOR_MODE: return( ColorizeCompositeOp ); case GIMP_DIVIDE_MODE: return( DivideCompositeOp ); case GIMP_HARDLIGHT_MODE: return( HardLightCompositeOp ); case GIMP_DODGE_MODE: return( ColorDodgeCompositeOp ); case GIMP_BURN_MODE: return( ColorBurnCompositeOp ); /* these are the ones we don't support...yet */ case GIMP_BEHIND_MODE: return( OverCompositeOp ); case GIMP_VALUE_MODE: return( OverCompositeOp ); default: return( OverCompositeOp ); } } /* %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % % % % % + R e a d B l o b S t r i n g W i t h L o n g S i z e % % % % % % % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % Method ReadBlobStringWithLongSize reads characters from a blob or file % starting with a long length byte and then characters to that length % % The format of the ReadBlobStringWithLongSize method is: % % char *ReadBlobStringWithLongSize(Image *image,char *string) % % A description of each parameter follows: % % o status: Method ReadBlobString returns the string on success, otherwise, % a null is returned. % % o image: The image. % % o string: The address of a character buffer. % % o max: Length of 'string' array. % % */ static char *ReadBlobStringWithLongSize(Image *image,char *string,size_t max) { int c; register unsigned long i; unsigned long length; assert(image != (Image *) NULL); assert(image->signature == MagickSignature); assert(max != 0); length = ReadBlobMSBLong(image); for (i=0; i < Min(length,max-1); i++) { c=ReadBlobByte(image); if (c == EOF) return((char *) NULL); string[i]=c; } string[i]='\0'; (void) SeekBlob(image, length-i, SEEK_CUR); return(string); } static MagickPassFail load_tile (Image* image, Image* tile_image, XCFDocInfo* inDocInfo, XCFLayerInfo* inLayerInfo, size_t data_length) { size_t nmemb_read_successfully; unsigned long x, y; PixelPacket *q; XCFPixelPacket *xcfdata, *xcfodata; unsigned char *graydata; /* Validate that claimed data length is sufficent for tile. */ { size_t expected_data_length=0; if (inDocInfo->image_type == GIMP_GRAY) { expected_data_length=tile_image->columns*tile_image->rows* sizeof(unsigned char); } else if (inDocInfo->image_type == GIMP_RGB) { expected_data_length=tile_image->columns*tile_image->rows* sizeof(XCFPixelPacket); } if (expected_data_length && (expected_data_length > data_length)) { ThrowException(&image->exception,CorruptImageError,CorruptImage, "Claimed tile data length is insufficient for tile data"); return MagickFail; } } xcfdata = xcfodata = MagickAllocateMemory(XCFPixelPacket *,data_length); graydata = (unsigned char *) xcfdata; /* used by gray and indexed */ if (xcfdata == (XCFPixelPacket *) NULL) { ThrowException(&image->exception,ResourceLimitError,MemoryAllocationFailed,NULL); return MagickFail; } nmemb_read_successfully = ReadBlob(image, data_length, xcfdata); if (nmemb_read_successfully != data_length) { MagickFreeMemory(xcfodata); ThrowException(&image->exception,CorruptImageError,UnexpectedEndOfFile, NULL); return MagickFail; } q=SetImagePixels(tile_image,0,0,tile_image->columns,tile_image->rows); if (q == (PixelPacket *) NULL) { CopyException(&image->exception,&tile_image->exception); MagickFreeMemory(xcfodata); return MagickFail; } for (x=0; x < tile_image->columns; x++) { if (inDocInfo->image_type == GIMP_GRAY) { for (y=tile_image->rows; y != 0; y--) { q->red =q->green=q->blue=ScaleCharToQuantum(*graydata); q->opacity = ScaleCharToQuantum(255U-inLayerInfo->opacity); graydata++; q++; } } else if (inDocInfo->image_type == GIMP_RGB) { for (y=tile_image->rows; y != 0; y--) { q->red = ScaleCharToQuantum(xcfdata->red); q->green = ScaleCharToQuantum(xcfdata->green); q->blue = ScaleCharToQuantum(xcfdata->blue); q->opacity = (Quantum) (xcfdata->opacity==0U ? TransparentOpacity : ScaleCharToQuantum(255U-inLayerInfo->opacity)); xcfdata++; q++; } } } MagickFreeMemory(xcfodata); return MagickPass; } static MagickPassFail load_tile_rle (Image* image, Image* tile_image, XCFDocInfo* inDocInfo, XCFLayerInfo* inLayerInfo, size_t data_length) { unsigned char data, val; magick_int64_t size; size_t nmemb_read_successfully; int count, length, bpp, /* BYTES per pixel! */ i, j; unsigned char *xcfdata, *xcfodata, *xcfdatalimit; PixelPacket *q; bpp = (int) inDocInfo->bpp; xcfdata = xcfodata = MagickAllocateMemory(unsigned char *,data_length); if (xcfdata == (unsigned char *) NULL) { ThrowException(&image->exception,ResourceLimitError,MemoryAllocationFailed,NULL); return MagickFail; } nmemb_read_successfully = ReadBlob(image, data_length, xcfdata); if (nmemb_read_successfully != data_length) { if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "Read %lu bytes, expected %lu bytes", (unsigned long) nmemb_read_successfully, (unsigned long) data_length); MagickFreeMemory(xcfodata); ThrowException(&image->exception,CorruptImageError,UnexpectedEndOfFile, NULL); return MagickFail; } xcfdatalimit = &xcfodata[nmemb_read_successfully - 1]; for (i = 0; i < bpp; i++) { q=SetImagePixels(tile_image,0,0,tile_image->columns,tile_image->rows); if (q == (PixelPacket *) NULL) { CopyException(&image->exception,&tile_image->exception); goto bogus_rle; } size = tile_image->rows * tile_image->columns; count = 0; while (size > 0) { if (xcfdata > xcfdatalimit) { goto bogus_rle; } val = *xcfdata++; length = val; if (length >= 128) { length = 255 - (length - 1); if (length == 128) { if (xcfdata >= xcfdatalimit) { goto bogus_rle; } length = ((*xcfdata << 8) + xcfdata[1]) & 0xFFFF; xcfdata += 2; } count += length; size -= length; if (size < 0) { goto bogus_rle; } if (&xcfdata[length-1] > xcfdatalimit) { goto bogus_rle; } while (length-- > 0) { data = *xcfdata++; switch (i) { case 0: { q->red = ScaleCharToQuantum(data); if ( inDocInfo->image_type == GIMP_GRAY ) { q->green = ScaleCharToQuantum(data); q->blue = ScaleCharToQuantum(data); q->opacity = ScaleCharToQuantum(255-inLayerInfo->opacity); } else { q->green = q->red; q->blue = q->red; q->opacity = ScaleCharToQuantum(255-inLayerInfo->opacity); } break; } case 1: { q->green = ScaleCharToQuantum(data); break; } case 2: { q->blue = ScaleCharToQuantum(data); break; } case 3: { q->opacity = (Quantum) (data==0 ? TransparentOpacity : ScaleCharToQuantum(255-inLayerInfo->opacity)); break; } } q++; } } else { length += 1; if (length == 128) { if (xcfdata >= xcfdatalimit) { goto bogus_rle; } length = ((*xcfdata << 8) + xcfdata[1]) & 0xFFFF; xcfdata += 2; } count += length; size -= length; if (size < 0) { goto bogus_rle; } if (xcfdata > xcfdatalimit) { goto bogus_rle; } val = *xcfdata++; for (j = 0; j < length; j++) { data = val; switch (i) { case 0: { q->red = ScaleCharToQuantum(data); if ( inDocInfo->image_type == GIMP_GRAY ) { q->green = ScaleCharToQuantum(data); q->blue = ScaleCharToQuantum(data); q->opacity = ScaleCharToQuantum(255-inLayerInfo->opacity); } else { q->green = q->red; q->blue = q->red; q->opacity = ScaleCharToQuantum(255-inLayerInfo->opacity); } break; } case 1: { q->green = ScaleCharToQuantum(data); break; } case 2: { q->blue = ScaleCharToQuantum(data); break; } case 3: { q->opacity = (Quantum) (data==0 ? TransparentOpacity : ScaleCharToQuantum(255-inLayerInfo->opacity)); break; } } q++; } } } if (SyncImagePixelsEx(tile_image,&tile_image->exception) == MagickFail) break; } MagickFreeMemory(xcfodata); return MagickPass; bogus_rle: if (xcfodata) MagickFreeMemory(xcfodata); (void) LogMagickEvent(CoderEvent,GetMagickModule(), "Failed to RLE-decode tile"); ThrowBinaryException(CorruptImageError,CorruptImage,image->filename); return MagickFail; } static MagickPassFail load_level (Image* image, XCFDocInfo* inDocInfo, XCFLayerInfo* inLayerInfo) { magick_off_t saved_pos, offset, offset2; unsigned long width, height; unsigned long ntiles, ntile_rows, ntile_cols; size_t tile_data_size; int i; Image* tile_image; int destLeft = 0, destTop = 0, tile_image_width, tile_image_height; MagickPassFail status = MagickPass; ExceptionInfo *exception = inDocInfo->exception; /* start reading the data */ width = ReadBlobMSBLong(image); /* width */ height = ReadBlobMSBLong(image); /* height */ /* read in the first tile offset. * if it is '0', then this tile level is empty * and we can simply return. */ offset = ReadBlobMSBLong(image); if (offset == 0) return MagickPass; if (offset >= inDocInfo->file_size) { if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "Tile offset %ld (file size %lu)!", (long) offset, (unsigned long) inDocInfo->file_size); ThrowBinaryException(CorruptImageError,CorruptImage,image->filename); } if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "load_level: dimensions %lux%lu, bpp %lu, offset %ld", width,height,(unsigned long) inDocInfo->bpp, (long) offset); /* Initialise the reference for the in-memory tile-compression */ ntile_rows=(height+TILE_HEIGHT-1)/TILE_HEIGHT; ntile_cols=(width+TILE_WIDTH-1)/TILE_WIDTH; ntiles=ntile_rows*ntile_cols; if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "Tile: dimensions %lux%lu, number of tiles %lu", ntile_cols,ntile_rows,ntiles); for (i = 0; i < (long) ntiles; i++) { status = MagickPass; if (offset == 0) { if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "Tile: offset %ld!", (long) offset); ThrowBinaryException(CorruptImageError,NotEnoughTiles,image->filename); } /* save the current position as it is where the next tile offset is stored. */ saved_pos = TellBlob(image); if (saved_pos < 0) ThrowBinaryException(BlobError,UnableToObtainOffset,image->filename); /* read in the offset of the next tile so we can calculate the amount of data needed for this tile */ offset2 = ReadBlobMSBLong(image); if (offset2 >= inDocInfo->file_size) { if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "Tile: offset %ld (file size %lu)!", (long) offset2, (unsigned long) inDocInfo->file_size); ThrowBinaryException(CorruptImageError,CorruptImage,image->filename); } /* seek to the tile offset */ (void) SeekBlob(image, offset, SEEK_SET); /* allocate the image for the tile NOTE: the last tile in a row or column may not be a full tile! */ tile_image_width=(size_t) (destLeft == (int) ntile_cols-1 ? (int) width % TILE_WIDTH : TILE_WIDTH); if (tile_image_width == 0) tile_image_width=TILE_WIDTH; tile_image_height = (size_t) (destTop == (int) ntile_rows-1 ? (int) height % TILE_HEIGHT : TILE_HEIGHT); if (tile_image_height == 0) tile_image_height=TILE_HEIGHT; tile_image=CloneImage(inLayerInfo->image, tile_image_width, tile_image_height,True,exception); /* Compute the tile data size. */ if (offset2 > offset) { /* Tile data size is simply the difference in file offsets. */ tile_data_size=offset2-offset; if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "Tile: start offset=%ld, end offset=%ld, data size=%lu", (long) offset,(long) offset2, (unsigned long) tile_data_size); } else { size_t packet_size=4; if (inDocInfo->image_type == GIMP_GRAY) packet_size=1; if (COMPRESS_NONE == inDocInfo->compression) { /* If compression is not used then enforce expected tile size. */ tile_data_size = tile_image->columns*tile_image->rows*packet_size; } else { /* Estimate the tile size. First we estimate the tile size, allowing for a possible expansion factor of 1.5. Then we truncate to the file length, whichever is smallest. */ offset2 = offset + tile_image->columns*tile_image->rows * packet_size * 1.5; tile_data_size = (size_t) offset2-offset; if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "We estimated tile data size: %lu", (unsigned long) tile_data_size); offset2 = Min(offset2,GetBlobSize(image)); tile_data_size = (size_t) offset2-offset; if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "Final tile data size: %lu", (unsigned long) tile_data_size); if (offset2 <= offset) ThrowBinaryException(CorruptImageError,UnexpectedEndOfFile,image->filename); } } /* read in the tile */ switch (inDocInfo->compression) { case COMPRESS_NONE: status=load_tile(image,tile_image,inDocInfo,inLayerInfo, tile_data_size); break; case COMPRESS_RLE: status=load_tile_rle(image,tile_image,inDocInfo,inLayerInfo, tile_data_size); break; case COMPRESS_ZLIB: ThrowBinaryException(CoderError,ZipCompressionNotSupported, image->filename); case COMPRESS_FRACTAL: ThrowBinaryException(CoderError,FractalCompressionNotSupported, image->filename); } if (MagickPass == status) { /* Composite the tile onto the layer's image, and then destroy it. We temporarily disable the progress monitor so that the user does not see composition of individual tiles. */ #if 0 const PixelPacket *p; PixelPacket *q; long canvas_x, canvas_y, y; unsigned long tile_width; canvas_x=destLeft*TILE_WIDTH; tile_width=tile_image->columns; for (y=0; y < (long) tile_image->columns; y++) { canvas_y=destTop*TILE_HEIGHT+y; p=AcquireImagePixels(tile_image,0,y,tile_image->columns,1, &inLayerInfo->image->exception); q=GetImagePixels(inLayerInfo->image,canvas_x,canvas_y, tile_image->columns,1); if ((p != (const PixelPacket *) NULL) && (q != (PixelPacket *) NULL)) (void) memcpy(q,p,tile_image->columns*sizeof(PixelPacket)); else printf("null pointer canvas: %lux%lu tile: %lux%lu+%ld+%ld !\n", inLayerInfo->image->columns,inLayerInfo->image->rows, tile_width,1LU,canvas_x,canvas_y); } #else MonitorHandler handler; long canvas_x, canvas_y; canvas_x=destLeft*TILE_WIDTH; canvas_y=destTop*TILE_HEIGHT; handler=SetMonitorHandler((MonitorHandler) NULL); (void) CompositeImageRegion(CopyCompositeOp,NULL,tile_image->columns, tile_image->rows,tile_image,0,0, inLayerInfo->image,canvas_x, canvas_y,&inLayerInfo->image->exception); (void) SetMonitorHandler(handler); #endif } DestroyImage(tile_image); /* adjust tile position */ destLeft++; if (destLeft >= (int) ntile_cols) { destLeft = 0; destTop++; } if (MagickPass != status) return status; /* restore the saved position so we'll be ready to * read the next offset. */ (void) SeekBlob(image, saved_pos, SEEK_SET); /* read in the offset of the next tile */ offset = ReadBlobMSBLong(image); if (offset != 0) if (!MagickMonitorFormatted(offset,inDocInfo->file_size, &image->exception,LoadImageText, image->filename, image->columns,image->rows)) break; } if (offset != 0) { ThrowBinaryException(CorruptImageError,CorruptImage,image->filename); } else { (void) MagickMonitorFormatted(inDocInfo->file_size, inDocInfo->file_size+1,&image->exception, LoadImageText,image->filename, image->columns,image->rows); } return MagickPass; } static MagickPassFail load_hierarchy (Image *image, XCFDocInfo* inDocInfo, XCFLayerInfo* inLayer) { unsigned long width, height; magick_off_t saved_pos, offset; unsigned long junk; width=ReadBlobMSBLong(image); /* width */ height=ReadBlobMSBLong(image); /* height */ inDocInfo->bpp = ReadBlobMSBLong(image); /* bpp */ /* load in the levels...we make sure that the number of levels * calculated when the TileManager was created is the same * as the number of levels found in the file. */ offset = ReadBlobMSBLong(image); /* top level */ if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "load_hierarchy: dimensions %lux%lu, bpp=%lu, offset=%lu", width,height,(unsigned long) inDocInfo->bpp, (unsigned long) offset); /* discard offsets for layers below first, if any. */ do { junk = ReadBlobMSBLong(image); } while ((junk != 0) && (!EOFBlob(image))); if (EOFBlob(image)) return MagickFail; /* save the current position as it is where the * next level offset is stored. */ saved_pos = TellBlob(image); if (saved_pos < 0) ThrowBinaryException(BlobError,UnableToObtainOffset,image->filename); /* seek to the level offset */ (void) SeekBlob(image, offset, SEEK_SET); /* read in the level */ if (load_level (image, inDocInfo, inLayer) == MagickFail) return MagickFail; /* restore the saved position so we'll be ready to * read the next offset. */ (void) SeekBlob(image, saved_pos, SEEK_SET); return MagickPass; } static MagickPassFail ReadOneLayer( Image* image, XCFDocInfo* inDocInfo, XCFLayerInfo* outLayer ) { unsigned int i; unsigned int foundPropEnd = 0; unsigned long hierarchy_offset, layer_mask_offset; /* clear the block! */ (void) memset( outLayer, 0, sizeof( XCFLayerInfo ) ); /* read in the layer width, height, type and name */ outLayer->width = ReadBlobMSBLong(image); outLayer->height = ReadBlobMSBLong(image); outLayer->type = ReadBlobMSBLong(image); (void) ReadBlobStringWithLongSize(image, outLayer->name, sizeof(outLayer->name)); if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "Loading layer \"%s\", dimensions %lux%lu, type %lu", outLayer->name, (unsigned long) outLayer->width, (unsigned long) outLayer->height, (unsigned long) outLayer->type); /* allocate the image for this layer */ outLayer->image=CloneImage(image,outLayer->width, outLayer->height,True, &image->exception); if (outLayer->image == (Image *) NULL) return MagickFail; /* read the layer properties! */ foundPropEnd = 0; while ( !foundPropEnd && !EOFBlob(image) ) { PropType prop_type = (PropType) ReadBlobMSBLong(image); size_t prop_size = ReadBlobMSBLong(image); switch (prop_type) { case PROP_END: foundPropEnd = 1; break; case PROP_ACTIVE_LAYER: outLayer->active = 1; break; case PROP_FLOATING_SELECTION: outLayer->floating_offset = ReadBlobMSBLong(image); break; case PROP_OPACITY: outLayer->opacity = ReadBlobMSBLong(image); break; case PROP_VISIBLE: outLayer->visible = ReadBlobMSBLong(image); break; case PROP_LINKED: outLayer->linked = ReadBlobMSBLong(image); break; case PROP_PRESERVE_TRANSPARENCY: outLayer->preserve_trans = ReadBlobMSBLong(image); break; case PROP_APPLY_MASK: outLayer->apply_mask = ReadBlobMSBLong(image); break; case PROP_EDIT_MASK: outLayer->edit_mask = ReadBlobMSBLong(image); break; case PROP_SHOW_MASK: outLayer->show_mask = ReadBlobMSBLong(image); break; case PROP_OFFSETS: outLayer->offset_x = (magick_int32_t) ReadBlobMSBLong(image); outLayer->offset_y = (magick_int32_t) ReadBlobMSBLong(image); break; case PROP_MODE: outLayer->mode = ReadBlobMSBLong(image); break; case PROP_TATTOO: outLayer->preserve_trans = ReadBlobMSBLong(image); break; case PROP_PARASITES: { for (i=0; i < prop_size; i++ ) if (ReadBlobByte(image) == EOF) break; /* long base = info->cp; GimpParasite *p; while (info->cp - base < prop_size) { p = xcf_load_parasite(info); gimp_drawable_parasite_attach(GIMP_DRAWABLE(layer), p); gimp_parasite_free(p); } if (info->cp - base != prop_size) g_message ("Error detected while loading a layer's parasites"); */ } break; default: /* g_message ("unexpected/unknown layer property: %d (skipping)", prop_type); */ { int buf[16]; size_t amount; /* read over it... */ while (prop_size > 0 && !EOFBlob(image)) { amount = Min (16, prop_size); for (i=0; i < amount; i++) if (ReadBlob(image, amount, &buf) != amount) break; prop_size -= Min (16, amount); } } break; } } if (!foundPropEnd) return MagickFail; /* clear the image based on the layer opacity */ (void) SetImage(outLayer->image,(Quantum)(255-outLayer->opacity)); /* set the compositing mode */ outLayer->image->compose = GIMPBlendModeToCompositeOperator( outLayer->mode ); if ( outLayer->visible == False ) { /* BOGUS: should really be separate member var! */ outLayer->image->compose = NoCompositeOp; } /* read the hierarchy and layer mask offsets */ hierarchy_offset = ReadBlobMSBLong(image); layer_mask_offset = ReadBlobMSBLong(image); /* read in the hierarchy */ (void) SeekBlob(image, hierarchy_offset, SEEK_SET); if (load_hierarchy (image, inDocInfo, outLayer) == MagickFail) return MagickFail; /* read in the layer mask */ if (layer_mask_offset != 0) { (void) SeekBlob(image, layer_mask_offset, SEEK_SET); #if 0 /* BOGUS: support layer masks! */ layer_mask = xcf_load_layer_mask (info, gimage); if (!layer_mask) goto error; /* set the offsets of the layer_mask */ GIMP_DRAWABLE (layer_mask)->offset_x = GIMP_DRAWABLE (layer)->offset_x; GIMP_DRAWABLE (layer_mask)->offset_y = GIMP_DRAWABLE (layer)->offset_y; gimp_layer_add_mask (layer, layer_mask, False); layer->mask->apply_mask = apply_mask; layer->mask->edit_mask = edit_mask; layer->mask->show_mask = show_mask; #endif } /* attach the floating selection... */ #if 0 /* BOGUS: we may need to read this, even if we don't support it! */ if (add_floating_sel) { GimpLayer *floating_sel; floating_sel = info->floating_sel; floating_sel_attach (floating_sel, GIMP_DRAWABLE (layer)); } #endif return MagickPass; } /* %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % % % % % % R e a d X C F I m a g e % % % % % % % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % Method ReadXCFImage reads a GIMP (GNU Image Manipulation Program) image % file and returns it. It allocates the memory necessary for the new Image % structure and returns a pointer to the new image. % % The format of the ReadXCFImage method is: % % image=ReadXCFImage(image_info) % % A description of each parameter follows: % % o image: Method ReadXCFImage returns a pointer to the image after % reading. A null image is returned if there is a memory shortage or % if the image cannot be read. % % o image_info: Specifies a pointer to a ImageInfo structure. % % o exception: return any errors or warnings in this structure. % % */ static Image *ReadXCFImage(const ImageInfo *image_info,ExceptionInfo *exception) { char magick[14]; Image *image; unsigned int status; unsigned long i, image_type; int foundPropEnd = 0; size_t count; XCFDocInfo doc_info; /* Open image file. */ assert(image_info != (const ImageInfo *) NULL); assert(image_info->signature == MagickSignature); assert(exception != (ExceptionInfo *) NULL); assert(exception->signature == MagickSignature); image=AllocateImage(image_info); status=OpenBlob(image_info,image,ReadBinaryBlobMode,exception); if (status == MagickFail) ThrowReaderException(FileOpenError,UnableToOpenFile,image); count=ReadBlob(image,14,(char *) magick); if ((count == 0) || (LocaleNCompare((char *) magick,"gimp xcf",8) != 0)) ThrowReaderException(CorruptImageError,ImproperImageHeader,image); /* clear the docinfo stuff */ (void) memset( &doc_info, 0, sizeof(XCFDocInfo)); doc_info.exception = exception; /* read the three simple values */ image->columns = doc_info.width = ReadBlobMSBLong(image); image->rows = doc_info.height = ReadBlobMSBLong(image); image_type = doc_info.image_type = ReadBlobMSBLong(image); /* Get file size to use for validation later. */ doc_info.file_size=GetBlobSize(image); if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "XCF dimensions %lux%lu, type %s", image->columns,image->rows, (image_type == GIMP_RGB ? "RGB" : (image_type == GIMP_GRAY ? "GRAY" : (image_type == GIMP_INDEXED ? "INDEXED" : "unknown")))); /* setup some things about the image...*/ image->compression=NoCompression; image->depth = 8; if ( image_type == GIMP_RGB ) { image->colorspace=RGBColorspace; } else if ( image_type == GIMP_GRAY ) { image->colorspace=GRAYColorspace; } else if ( image_type == GIMP_INDEXED ) { ThrowReaderException(CoderError,ColormapTypeNotSupported,image); } /* SetImage can be very expensive and it is not clear that this one is actually needed so comment it out for now. */ /* (void) SetImage(image,OpaqueOpacity); */ /* until we know otherwise...*/ image->matte=True; /* XCF always has a matte! */ /* read properties */ while ( !foundPropEnd && !EOFBlob(image) ) { PropType prop_type = (PropType) ReadBlobMSBLong(image); size_t prop_size = ReadBlobMSBLong(image); switch ( prop_type ) { case PROP_END: foundPropEnd = 1; break; case PROP_COLORMAP: /* BOGUS: just skip it for now */ for (i=0; i file_version == 0) { gint i; g_message (_("XCF warning: version 0 of XCF file format\n" "did not save indexed colormaps correctly.\n" "Substituting grayscale map.")); info->cp += xcf_read_int32 (info->fp, (guint32*) &gimage->num_cols, 1); gimage->cmap = g_new (guchar, gimage->num_cols*3); xcf_seek_pos (info, info->cp + gimage->num_cols); for (i = 0; inum_cols; i++) { gimage->cmap[i*3+0] = i; gimage->cmap[i*3+1] = i; gimage->cmap[i*3+2] = i; } } else { info->cp += xcf_read_int32 (info->fp, (guint32*) &gimage->num_cols, 1); gimage->cmap = g_new (guchar, gimage->num_cols*3); info->cp += xcf_read_int8 (info->fp, (guint8*) gimage->cmap, gimage->num_cols*3); } */ break; case PROP_COMPRESSION: { int c; c = ReadBlobByte(image); if (c == EOF) ThrowReaderException(CorruptImageError,UnexpectedEndOfFile, image); doc_info.compression = c; if ((doc_info.compression != COMPRESS_NONE) && (doc_info.compression != COMPRESS_RLE) && (doc_info.compression != COMPRESS_ZLIB) && (doc_info.compression != COMPRESS_FRACTAL)) ThrowReaderException(CorruptImageError,CompressionNotValid, image); } break; case PROP_GUIDES: { /* just skip it - we don't care about guides */ for (i=0; i < prop_size; i++ ) if (ReadBlobByte(image) == EOF) ThrowReaderException(CorruptImageError,UnexpectedEndOfFile, image); } break; case PROP_RESOLUTION: { /* float xres = (float) */ (void) ReadBlobMSBLong(image); /* float yres = (float) */ (void) ReadBlobMSBLong(image); /* if (xres < GIMP_MIN_RESOLUTION || xres > GIMP_MAX_RESOLUTION || yres < GIMP_MIN_RESOLUTION || yres > GIMP_MAX_RESOLUTION) { g_message ("Warning, resolution out of range in XCF file"); xres = gimage->gimp->config->default_xresolution; yres = gimage->gimp->config->default_yresolution; } */ /* BOGUS: we don't write these yet because we aren't reading them properly yet :( */ /* image->x_resolution = xres; */ /* image->y_resolution = yres; */ } break; case PROP_TATTOO: { /* we need to read it, even if we ignore it */ /*unsigned long tattoo_state = */ (void) ReadBlobMSBLong(image); } break; case PROP_PARASITES: { /* BOGUS: we may need these for IPTC stuff */ for (i=0; i < prop_size; i++ ) if (ReadBlobByte(image) == EOF) ThrowReaderException(CorruptImageError,UnexpectedEndOfFile,image); /* glong base = info->cp; GimpParasite *p; while (info->cp - base < prop_size) { p = xcf_load_parasite (info); gimp_image_parasite_attach (gimage, p); gimp_parasite_free (p); } if (info->cp - base != prop_size) g_message ("Error detected while loading an image's parasites"); */ } break; case PROP_UNIT: { /* BOGUS: ignore for now... */ /*unsigned long unit = */ (void) ReadBlobMSBLong(image); } break; case PROP_PATHS: { /* BOGUS: just skip it for now */ for (i=0; i < prop_size; i++ ) if (ReadBlobByte(image) == EOF) ThrowReaderException(CorruptImageError,UnexpectedEndOfFile,image); /* PathList *paths = xcf_load_bzpaths (gimage, info); gimp_image_set_paths (gimage, paths); */ } break; case PROP_USER_UNIT: { char unit_string[1000]; /*BOGUS: ignored for now */ /*float factor = (float) */ (void) ReadBlobMSBLong(image); /* unsigned long digits = */ (void) ReadBlobMSBLong(image); for (i=0; i < 5; i++) (void) ReadBlobStringWithLongSize(image, unit_string, sizeof(unit_string)); } break; default: /* g_message ("unexpected/unknown image property: %d (skipping)", prop_type); */ { int buf[16]; size_t amount; /* read over it... */ while (prop_size > 0) /* size_t prop_size, amount */ { amount = Min (sizeof(buf), prop_size); for (i=0; i < amount; i++) { amount = ReadBlob(image, amount, &buf); if (amount == 0U) ThrowReaderException(CorruptImageError, UnexpectedEndOfFile,image); } prop_size -= Min (16U, amount); } } break; } } if (!foundPropEnd) ThrowReaderException(CorruptImageError,ImproperImageHeader,image); if (image_info->ping && (image_info->subrange != 0)) { ; /* do nothing, we were just pinging! */ } else { XCFLayerInfo *layer_info; unsigned long number_layers = 0, num_layers = 0; long current_layer = 0, first_layer = 0, last_layer = 0, T = 0; MagickBool foundAllLayers = MagickFalse; /* BIG HACK because XCF doesn't include the layer count, and we want to know it in advance in order to allocate memory, we have to scan the layer offset list, and then reposition the read pointer */ magick_off_t oldPos = TellBlob(image); if (oldPos < 0) ThrowReaderException(BlobError,UnableToObtainOffset,image); do { long offset = (long) ReadBlobMSBLong(image); if ( offset == 0 ) foundAllLayers = MagickTrue; else number_layers++; } while ( !foundAllLayers ); (void) SeekBlob(image, oldPos, SEEK_SET); /* restore the position! */ first_layer = image_info->subimage; num_layers = number_layers; /* subrange==0 means read all the images */ if( image_info->subrange > 0UL && image_info->subrange < number_layers ) num_layers = image_info->subrange; last_layer = first_layer + num_layers-1; if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "XCF number_layers=%lu first_layer=%ld last_layer=%ld", number_layers, first_layer, last_layer); /* XCF has layers backwards, so this gets a bit complicated */ T = last_layer; last_layer = number_layers - first_layer - 1; first_layer = number_layers - T - 1; number_layers = num_layers; if (image->logging) (void) LogMagickEvent(CoderEvent,GetMagickModule(), "XCF reading layers %ld to %ld inclusive", first_layer, last_layer); /* allocate our array of layer info blocks */ layer_info=MagickAllocateArray(XCFLayerInfo *, number_layers, sizeof(XCFLayerInfo)); if (layer_info == (XCFLayerInfo *) NULL) ThrowReaderException(ResourceLimitError,MemoryAllocationFailed,image); (void) memset(layer_info,0,number_layers*sizeof(XCFLayerInfo)); for ( ; ; ) { magick_off_t offset, saved_pos; MagickPassFail layer_ok; /* read in the offset of the next layer */ offset = ReadBlobMSBLong(image); /* if the offset is 0 then we are at the end * of the layer list. */ if (offset == 0) break; /* save the current position as it is where the * next layer offset is stored. */ saved_pos = TellBlob(image); if (saved_pos < 0) { MagickFreeMemory(layer_info); ThrowReaderException(BlobError,UnableToObtainOffset,image); } if( first_layer <= current_layer && current_layer <= last_layer ) { /* seek to the layer offset */ (void) SeekBlob(image, offset, SEEK_SET); /* read in the layer */ layer_ok = ReadOneLayer( image, &doc_info, &layer_info[current_layer-first_layer] ); if (!layer_ok) { int j; for (j=0; j <= (current_layer-first_layer); j++) { if (layer_info[j].image) DestroyImage(layer_info[j].image); } MagickFreeMemory(layer_info); CopyException(exception,&image->exception); CloseBlob(image); DestroyImageList(image); return (Image *) NULL; } /* restore the saved position so we'll be ready to * read the next offset. */ (void) SeekBlob(image, saved_pos, SEEK_SET); } current_layer++; } if ( number_layers == 1 ) { /* composite the layer data onto the main image & then dispose the layer */ (void) CompositeImage(image, OverCompositeOp, layer_info[0].image, layer_info[0].offset_x, layer_info[0].offset_y ); DestroyImage( layer_info[0].image ); } else { #if 0 { /* NOTE: XCF layers are REVERSED from composite order! */ long j; for (j=number_layers-1; j>=0; j--) { /* BOGUS: need to consider layer blending modes!! */ if ( layer_info[j].visible ) { /* only visible ones, please! */ CompositeImage(image, OverCompositeOp, layer_info[j].image, layer_info[j].offset_x, layer_info[j].offset_y ); DestroyImage( layer_info[j].image ); } } } #else { /* NOTE: XCF layers are REVERSED from composite order! */ long j; /* first we copy the last layer on top of the main image */ (void) CompositeImage(image, CopyCompositeOp, layer_info[number_layers-1].image, layer_info[number_layers-1].offset_x, layer_info[number_layers-1].offset_y ); DestroyImage( layer_info[number_layers-1].image ); /* now reverse the order of the layers as they are put into subimages */ image->next=layer_info[number_layers-2].image; layer_info[number_layers-2].image->previous=image; for (j=(long) number_layers-2; j >= 0; j--) { if (j > 0) layer_info[j].image->next=layer_info[j-1].image; if (j < ((long) number_layers-1)) layer_info[j].image->previous=layer_info[j+1].image; layer_info[j].image->page.x = layer_info[j].offset_x; layer_info[j].image->page.y = layer_info[j].offset_y; layer_info[j].image->page.width = layer_info[j].width; layer_info[j].image->page.height = layer_info[j].height; } } #endif } MagickFreeMemory(layer_info); #if 0 /* BOGUS: do we need the channels?? */ while (True) { /* read in the offset of the next channel */ info->cp += xcf_read_int32 (info->fp, &offset, 1); /* if the offset is 0 then we are at the end * of the channel list. */ if (offset == 0) break; /* save the current position as it is where the * next channel offset is stored. */ saved_pos = info->cp; /* seek to the channel offset */ xcf_seek_pos (info, offset); /* read in the layer */ channel = xcf_load_channel (info, gimage); if (!channel) goto error; num_successful_elements++; /* add the channel to the image if its not the selection */ if (channel != gimage->selection_mask) gimp_image_add_channel (gimage, channel, -1); /* restore the saved position so we'll be ready to * read the next offset. */ xcf_seek_pos (info, saved_pos); } #endif } CloseBlob(image); if ( image_type == GIMP_GRAY ) image->is_grayscale=MagickTrue; return(image); } /* %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % % % % % % R e g i s t e r X C F I m a g e % % % % % % % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % Method RegisterXCFImage adds attributes for the XCF image format to % the list of supported formats. The attributes include the image format % tag, a method to read and/or write the format, whether the format % supports the saving of more than one frame to the same file or blob, % whether the format supports native in-memory I/O, and a brief % description of the format. % % The format of the RegisterXCFImage method is: % % RegisterXCFImage(void) % */ ModuleExport void RegisterXCFImage(void) { MagickInfo *entry; entry=SetMagickInfo("XCF"); entry->decoder=(DecoderHandler) ReadXCFImage; entry->magick=(MagickHandler) IsXCF; entry->description="GIMP image"; entry->module="XCF"; entry->seekable_stream=True; (void) RegisterMagickInfo(entry); } /* %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % % % % % % U n r e g i s t e r X C F I m a g e % % % % % % % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % Method UnregisterXCFImage removes format registrations made by the % XCF module from the list of supported formats. % % The format of the UnregisterXCFImage method is: % % UnregisterXCFImage(void) % */ ModuleExport void UnregisterXCFImage(void) { (void) UnregisterMagickInfo("XCF"); }