/* Generated file errSymTbl.c */ #include "errMdef.h" #include "errSymTbl.h" #include "dbDefs.h" #ifndef M_asLib #define M_asLib (501 << 16) /* Access Security */ #endif #ifndef M_bucket #define M_bucket (502 << 16) /* Bucket Hash */ #endif #ifndef M_devLib #define M_devLib (503 << 16) /* Hardware RegisterAccess */ #endif #ifndef M_stdlib #define M_stdlib (504 << 16) /* EPICS Standard library */ #endif #ifndef M_pool #define M_pool (505 << 16) /* Thread pool */ #endif #ifndef M_time #define M_time (506 << 16) /* epicsTime */ #endif #ifndef M_dbAccess #define M_dbAccess (511 << 16) /* Database Access Routines */ #endif #ifndef M_dbLib #define M_dbLib (512 << 16) /* Static Database Access */ #endif #ifndef M_drvSup #define M_drvSup (513 << 16) /* Driver Support */ #endif #ifndef M_devSup #define M_devSup (514 << 16) /* Device Support */ #endif #ifndef M_recSup #define M_recSup (515 << 16) /* Record Support */ #endif #ifndef M_cas #define M_cas (521 << 16) /* CA server */ #endif #ifndef M_gddFuncTbl #define M_gddFuncTbl (522 << 16) /* gdd jump table */ #endif #ifndef M_casApp #define M_casApp (523 << 16) /* CA server application */ #endif static ERRSYMBOL symbols[] = { { (M_devLib| 1), "Interrupt vector in use"}, { (M_devLib| 2), "Interrupt vector install failed"}, { (M_devLib| 3), "Unrecognized interrupt type"}, { (M_devLib| 4), "Interrupt vector not in use by caller"}, { (M_devLib| 5), "Invalid VME A16 address"}, { (M_devLib| 6), "Invalid VME A24 address"}, { (M_devLib| 7), "Invalid VME A32 address"}, { (M_devLib| 8), "Unrecognized address space type"}, { (M_devLib| 9), "Specified device address overlaps another device"}, { (M_devLib| 10), "This device already owns the address range"}, { (M_devLib| 11), "Unable to map address"}, { (M_devLib| 12), "Interrupt at vector disconnected from an EPICS device"}, { (M_devLib| 13), "Internal failure"}, { (M_devLib| 14), "Unable to enable interrupt level"}, { (M_devLib| 15), "Unable to disable interrupt level"}, { (M_devLib| 16), "Memory allocation failed"}, { (M_devLib| 17), "Specified device address unregistered"}, { (M_devLib| 18), "No device at specified address"}, { (M_devLib| 19), "Wrong device type found at specified address"}, { (M_devLib| 20), "Signal number (offset) to large"}, { (M_devLib| 21), "Signal count to large"}, { (M_devLib| 22), "Device does not support requested operation"}, { (M_devLib| 23), "Parameter too high"}, { (M_devLib| 24), "Parameter too low"}, { (M_devLib| 25), "Specified address is ambiguous (more than one device responds)"}, { (M_devLib| 26), "Device self test failed"}, { (M_devLib| 27), "Device failed during initialization"}, { (M_devLib| 28), "Input exceeds Hardware Limit"}, { (M_devLib| 29), "Unable to locate address space for device"}, { (M_devLib| 30), "Device timed out"}, { (M_devLib| 31), "Bad function pointer"}, { (M_devLib| 32), "Bad interrupt vector"}, { (M_devLib| 33), "Bad function argument"}, { (M_devLib| 34), "Invalid ISA address"}, { (M_devLib| 35), "Invalid VME CR/CSR address"}, { (M_time| 1), "No time provider"}, { (M_time| 2), "Bad event number"}, { (M_time| 3), "Invalid arguments"}, { (M_time| 4), "Out of memory"}, { (M_time| 5), "Provider not synchronized"}, { (M_time| 6), "Invalid timezone"}, { (M_time| 7), "Time conversion error"}, { (M_asLib| 1), "Client Exists"}, { (M_asLib| 2), "User Access Group does not exist"}, { (M_asLib| 3), "Host Access Group does not exist"}, { (M_asLib| 4), "access security: no access allowed"}, { (M_asLib| 5), "access security: no modification allowed"}, { (M_asLib| 6), "access security: bad configuration file"}, { (M_asLib| 7), "access security: bad calculation espression"}, { (M_asLib| 8), "Duplicate Access Security Group"}, { (M_asLib| 9), "access security: Init failed"}, { (M_asLib|10), "access security is not active"}, { (M_asLib|11), "access security: bad ASMEMBERPVT"}, { (M_asLib|12), "access security: bad ASCLIENTPVT"}, { (M_asLib|13), "access security: bad ASG"}, { (M_asLib|14), "access security: no Memory"}, { (M_stdlib | 1), "No digits to convert"}, { (M_stdlib | 2), "Extraneous characters"}, { (M_stdlib | 3), "Too small to represent"}, { (M_stdlib | 4), "Too large to represent"}, { (M_stdlib | 5), "Number base not supported"}, { (M_pool| 1), "Job already queued or running"}, { (M_pool| 2), "Job was not queued or running"}, { (M_pool| 3), "Job not associated with a pool"}, { (M_pool| 4), "Pool not currently accepting jobs"}, { (M_pool| 5), "Can't create worker thread"}, { (M_pool| 6), "Pool still busy after timeout"}, { (M_dbAccess| 1), "Process Variable Not Found"}, { (M_dbAccess| 3), "Illegal Database Request Type"}, { (M_dbAccess| 5), "Attempt to modify noMod field"}, { (M_dbAccess| 7), "Illegal Lock Set"}, { (M_dbAccess| 9), "get precision failed"}, { (M_dbAccess|11), "Only one element allowed"}, { (M_dbAccess|13), "Illegal choice"}, { (M_dbAccess|15), "Illegal field value"}, { (M_dbAccess|17), "Logic error generating lock sets"}, { (M_dbAccess|21), "No link support table or entry"}, { (M_dbAccess|31), "missing record support entry table"}, { (M_dbAccess|33), "RSET or DSXT routine not defined"}, { (M_dbAccess|35), "Subroutine not found"}, { (M_dbAccess|37), "Request is pending"}, { (M_dbAccess|39), "Request is Blocked"}, { (M_dbAccess|41), "putFields are disabled"}, { (M_dbAccess|43), "Hardware link type not on INP/OUT"}, { (M_dbAccess|53), "Breakpoint already set"}, { (M_dbAccess|55), "No breakpoint set in record"}, { (M_dbAccess|57), "Record not stopped"}, { (M_dbAccess|59), "Error in argument"}, { (M_dbAccess|61), "Logic error in breakpoint routine"}, { (M_dbAccess|63), "Cannot spawn dbContTask"}, { (M_dbAccess|65), "Cannot resume dbContTask"}, { (M_dbAccess|66), "unable to allocate data structure from pool"}, { (M_dbAccess|67), "Not initialized"}, { (M_dbAccess|68), "Buffer full"}, { (M_dbLib|1), "Record Type does not exist"}, { (M_dbLib|3), "Record Already exists"}, { (M_dbLib|5), "Record Not Found"}, { (M_dbLib|7), "Field Description Not Found"}, { (M_dbLib|9), "Field Not Found"}, { (M_dbLib|11), "Bad Field value"}, { (M_dbLib|13), "Menu not found"}, { (M_dbLib|15), "Bad Link Field"}, { (M_dbLib|17), "Record Name is too long"}, { (M_dbLib|19), "Record support not found"}, { (M_dbLib|21), "String is too long"}, { (M_dbLib|23), "Missing SizeOffset Routine - No record support?"}, { (M_dbLib|27), "Out of memory"}, { (M_dbLib|29), "Info item Not Found"}, }; static ERRSYMTAB symTbl = { NELEMENTS(symbols), symbols }; ERRSYMTAB_ID errSymTbl = &symTbl;