#!/bin/bash
#==============================================================
#
#  Abs:  Script to bring up the EDM ip-adc-8413 display 
#
#  Name: ip8413_display
#
#  Rem:  This script provides the appropriate macro
#        definitions to bring up the hytec
#        ip-adc-8413 module display
#
#        Prior to executing this script from the command
#        line the user is required to setup the EPICS
#        release and host architecture environment variables
#        necessary to run edm.
#
#  Usage: ip8413_display [version]
#          where version 1=default 2=SLAC
#
#         ex1) ip8413_display
#         ex2) ip8413_display 1
#         ex3) ip8413_display 2  
#   
#         The version argument is optional, where by
#         if the argument is not supplied the default
#         of "1" is used. This is shown in example ex1 a
#         above and it will provide the standard display
#         for the standard hytec ip-adc-8413 module. The
#         example, ex2 will provide the same display.
#         The example, ex3 will provide the display for
#         the SLAC modified version if the ip-adc-8413
#         module.         
#
#  Auth: 05-Dec-2007, K. Luchini       (LUCHINI)
#  Rev:  dd-mmm-yyyy, Reviewer's Name  (USERNAME)
#
#--------------------------------------------------------------
#  Mod: 
#        dd-mmm-yyyy, First Lastname   (USERNAME):
#          comments
#
#==============================================================
#
# set defaults
name="ADC:IN20"
card=1

# Check input arguments
if [ $# == 0 ]; then
  edm -x -m "DEVICE=$name,C=$card" ip8413.edl
elif [ $# == 1 ]; then
  ver=$1
  echo "version $ver"
  if [ $ver == 1 ]; then
     edm -x -m "DEVICE=$name,C=$card" ip8413.edl
  elif [ $ver == 2 ]; then
     edm -x -m "DEVICE=$name,C=$card" ip8413_v2.edl
  else
    echo "ip8413_display: invalid arguments"
    echo "Usage: ip8413_display [version]"
    echo "  version - module version 1-2, default=1 SLAC version=2"
  fi
fi

# End of script