{% extends "tree.html" %} {% block content %}
| BPM_A_Stream | (not supported) | |
| BPM_B_Stream | (not supported) | |
| Stream0 | (not supported) | |
| Stream1 | (not supported) | |
| Stream2 | (not supported) | |
| Stream3 | (not supported) | |
| Stream4 | (not supported) | |
| Stream5 | (not supported) | |
| Stream6 | (not supported) | |
| Stream7 | (not supported) |
| dram | (not supported) | DRAM |
| AMC_CARRIER_CORE_VERSION_C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | AMC Carrier Core Version Number |
| BurstSize |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| C_SoftTrigger | Send a trigger to the buffer | ||
| Done | (not supported) | ||
| Empty | (not supported) | ||
| Enabled | (not supported) | ||
| EndAddr | (not supported) | ||
| Error | (not supported) | ||
| FramesAfterTrigger | (not supported) | ||
| FramesSinceTrigger | (not supported) | ||
| Full | (not supported) | ||
| Init | (not supported) | ||
| Initialize | Initialize the buffer. Reset the write pointer to StartAddr. Clear the Done field. | ||
| Mode | (not supported) | ||
| MsgDest | (not supported) | ||
| SoftTrigger | (not supported) | ||
| SoftTriggerAll | Send a trigger to the buffer | ||
| StartAddr | (not supported) | ||
| Status | (not supported) | Include all of the status bits in one access | |
| TriggerAddr | (not supported) | ||
| Triggered | (not supported) | ||
| WrAddr | (not supported) |
| MemoryArray | (not supported) | Memory Array |
| BurstSize |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| C_SoftTrigger | Send a trigger to the buffer | ||
| Done[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Done[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Done[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Done[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Empty[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Empty[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Empty[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Empty[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Enabled[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Enabled[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Enabled[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Enabled[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| EndAddr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| EndAddr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| EndAddr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| EndAddr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Error[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Error[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Error[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Error[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesAfterTrigger[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesAfterTrigger[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesAfterTrigger[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesAfterTrigger[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesSinceTrigger[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesSinceTrigger[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesSinceTrigger[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesSinceTrigger[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Full[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Full[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Full[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Full[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Init[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Init[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Init[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Init[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Initialize | Initialize the buffer. Reset the write pointer to StartAddr. Clear the Done field. | ||
| Mode[0] | |||
| Mode[1] | |||
| Mode[2] | |||
| Mode[3] | |||
| MsgDest[0] | |||
| MsgDest[1] | |||
| MsgDest[2] | |||
| MsgDest[3] | |||
| SoftTrigger[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SoftTrigger[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SoftTrigger[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SoftTrigger[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SoftTriggerAll | Send a trigger to the buffer | ||
| StartAddr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| StartAddr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| StartAddr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| StartAddr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Status[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Include all of the status bits in one access | |
| Status[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Include all of the status bits in one access | |
| Status[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Include all of the status bits in one access | |
| Status[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Include all of the status bits in one access | |
| TriggerAddr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TriggerAddr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TriggerAddr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TriggerAddr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Triggered[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Triggered[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Triggered[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Triggered[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| WrAddr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| WrAddr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| WrAddr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| WrAddr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) |
| BurstSize |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| C_SoftTrigger | Send a trigger to the buffer | ||
| Done[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Done[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Done[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Done[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Empty[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Empty[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Empty[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Empty[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Enabled[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Enabled[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Enabled[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Enabled[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| EndAddr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| EndAddr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| EndAddr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| EndAddr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Error[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Error[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Error[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Error[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesAfterTrigger[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesAfterTrigger[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesAfterTrigger[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesAfterTrigger[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesSinceTrigger[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesSinceTrigger[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesSinceTrigger[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FramesSinceTrigger[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Full[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Full[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Full[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Full[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Init[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Init[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Init[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Init[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Initialize | Initialize the buffer. Reset the write pointer to StartAddr. Clear the Done field. | ||
| Mode[0] | |||
| Mode[1] | |||
| Mode[2] | |||
| Mode[3] | |||
| MsgDest[0] | |||
| MsgDest[1] | |||
| MsgDest[2] | |||
| MsgDest[3] | |||
| SoftTrigger[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SoftTrigger[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SoftTrigger[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SoftTrigger[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SoftTriggerAll | Send a trigger to the buffer | ||
| StartAddr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| StartAddr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| StartAddr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| StartAddr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Status[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Include all of the status bits in one access | |
| Status[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Include all of the status bits in one access | |
| Status[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Include all of the status bits in one access | |
| Status[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Include all of the status bits in one access | |
| TriggerAddr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TriggerAddr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TriggerAddr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TriggerAddr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Triggered[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Triggered[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Triggered[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| Triggered[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| WrAddr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| WrAddr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| WrAddr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| WrAddr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) |
| BootStartAddress |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Bootloader Start Address | |
| CrateId |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ATCA Crate ID | |
| EthUpTime |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ETH Uptime (units of sec) | |
| MAC[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | MAC Address[3:0] | |
| MAC[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | MAC Address[3:0] | |
| MAC[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | MAC Address[3:0] | |
| MAC[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | MAC Address[3:0] | |
| SlotNumber |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ATCA Logical Slot Number | |
| VersionMajor |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSI's Major Version Number | |
| VersionMinor |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSI's Minor Version Number |
| LastPhase |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Last timing frame phase seen | |
| PhaseCount | (not supported) | Timing frame phase | |
| PhaseMask |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Mask for timing frame phase lock target | |
| PhaseTarget |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Timing frame phase lock target | |
| ResetLen |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Reset length |
| ACJTAG_DEBUG_MODE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ACJTAG_MODE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ACJTAG_RESET |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ADAPT_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ADAPT_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ALIGN_COMMA_DOUBLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ALIGN_COMMA_ENABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ALIGN_COMMA_WORD |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ALIGN_MCOMMA_DET |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ALIGN_MCOMMA_VALUE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ALIGN_PCOMMA_DET |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ALIGN_PCOMMA_VALUE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| A_RXOSCALRESET |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| A_RXPROGDIVRESET |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| A_TXPROGDIVRESET |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CBCC_DATA_SOURCE_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CDR_SWAP_MODE_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_KEEP_ALIGN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_MAX_SKEW |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_1_1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_1_2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_1_3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_1_4 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_1_ENABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_2_1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_2_2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_2_3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_2_4 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_2_ENABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_2_USE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CHAN_BOND_SEQ_LEN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_CORRECT_USE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_KEEP_IDLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_MAX_LAT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_MIN_LAT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_PRECEDENCE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_REPEAT_WAIT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_1_1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_1_2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_1_3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_1_4 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_1_ENABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_2_1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_2_2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_2_3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_2_4 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_2_ENABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_2_USE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CLK_COR_SEQ_LEN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CPLL_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CPLL_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CPLL_CFG2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CPLL_CFG3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CPLL_FBDIV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CPLL_FBDIV_45 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CPLL_INIT_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CPLL_INIT_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CPLL_LOCK_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| CPLL_REFCLK_DIV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| DDI_CTRL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| DDI_REALIGN_WAIT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| DEC_MCOMMA_DETECT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| DEC_PCOMMA_DETECT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| DEC_VALID_COMMA_ONLY |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| DFE_D_X_REL_POS |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| DFE_VCM_COMP_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| DMONITOR_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| DMONITOR_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_CLK_PHASE_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_CONTROL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_ERRDET_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_EYE_SCAN_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_HORZ_OFFSET |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_PMA_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_PRESCALE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_QUALIFIER[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_QUALIFIER[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_QUALIFIER[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_QUALIFIER[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_QUALIFIER[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_QUAL_MASK[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_QUAL_MASK[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_QUAL_MASK[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_QUAL_MASK[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_QUAL_MASK[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_SDATA_MASK[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_SDATA_MASK[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_SDATA_MASK[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_SDATA_MASK[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| ES_SDATA_MASK[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| EVODD_PHI_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| EYE_SCAN_SWAP_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FTS_DESKEW_SEQ_ENABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FTS_LANE_DESKEW_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| FTS_LANE_DESKEW_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| GEARBOX_MODE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| GM_BIAS_SELECT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| LOCAL_MASTER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| OOBDIVCTL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| OOB_PWRUP |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCI3_AUTO_REALIGN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCI3_PIPE_RX_ELECIDLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCI3_RX_ASYNC_EBUF_BYPASS |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCI3_RX_ELECIDLE_EI2_ENABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCI3_RX_ELECIDLE_H2L_COUNT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCI3_RX_ELECIDLE_H2L_DISABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCI3_RX_ELECIDLE_HI_COUNT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCI3_RX_ELECIDLE_LP4_DISABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCI3_RX_FIFO_DISABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCIE_BUFG_DIV_CTRL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCIE_RXPCS_CFG_GEN3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCIE_RXPMA_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCIE_TXPCS_CFG_GEN3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCIE_TXPMA_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCS_PCIE_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCS_RSVD0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PCS_RSVD1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PD_TRANS_TIME_FROM_P2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PD_TRANS_TIME_NONE_P2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PD_TRANS_TIME_TO_P2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PLL_SEL_MODE_GEN12 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PLL_SEL_MODE_GEN3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PMA_RSV1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| PROCESS_PAR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RATE_SW_USE_DRP |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RESET_POWERSAVE_DISABLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUFRESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_ADDR_MODE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_EIDLE_HI_CNT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_EIDLE_LO_CNT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_RESET_ON_CB_CHANGE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_RESET_ON_COMMAALIGN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_RESET_ON_EIDLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_RESET_ON_RATE_CHANGE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_THRESH_OVFLW |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_THRESH_OVRD |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXBUF_THRESH_UNDFLW |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDRFREQRESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDRPHRESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG0_GEN3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG1_GEN3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG2_GEN3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG3_GEN3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG4_GEN3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG5 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_CFG5_GEN3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_FR_RESET_ON_EIDLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_HOLD_DURING_EIDLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_LOCK_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_LOCK_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_LOCK_CFG2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCDR_PH_RESET_ON_EIDLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCFOK_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCFOK_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXCFOK_CFG2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFELPMRESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFELPM_KL_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFELPM_KL_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFELPM_KL_CFG2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_CFG[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_CFG[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_GC_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_GC_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_GC_CFG2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H2_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H2_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H3_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H3_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H4_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H4_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H5_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H5_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H6_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H6_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H7_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H7_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H8_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H8_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H9_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_H9_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HA_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HA_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HB_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HB_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HC_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HC_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HD_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HD_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HE_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HE_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HF_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_HF_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_OS_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_OS_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_UT_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_UT_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_VP_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDFE_VP_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDLY_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXDLY_LCFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXELECIDLE_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXGBOX_FIFO_INIT_RD_ADDR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXGEARBOX_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXISCANRESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXLPM_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXLPM_GC_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXLPM_KH_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXLPM_KH_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXLPM_OS_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXLPM_OS_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXOOB_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXOOB_CLK_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXOSCALRESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXOUT_DIV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPCSRESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPHBEACON_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPHDLY_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPHSAMP_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPHSLIP_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPH_MONITOR_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPI_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPI_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPI_CFG2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPI_CFG3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPI_CFG4 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPI_CFG5 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPI_CFG6 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPI_LPM |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPI_VREFSEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPMACLK_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPMARESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPRBS_ERR_LOOPBACK |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXPRBS_LINKACQ_CNT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXSLIDE_AUTO_WAIT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXSLIDE_MODE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXSYNC_MULTILANE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXSYNC_OVRD |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RXSYNC_SKIP_DA |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_AFE_CM_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_BIAS_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_BUFFER_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_CAPFF_SARC_ENB |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_CLK25_DIV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_CLKMUX_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_CLK_SLIP_OVRD |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_CM_BUF_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_CM_BUF_PD |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_CM_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_CM_TRIM |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_CTLE3_LPF |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DATA_WIDTH |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DDI_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DEFER_RESET_BUF_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DFELPM_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DFELPM_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DFELPM_KLKH_AGC_STUP_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DFE_AGC_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DFE_AGC_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DFE_KL_LPM_KH_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DFE_KL_LPM_KH_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DFE_KL_LPM_KL_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DFE_KL_LPM_KL_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DFE_LPM_HOLD_DURING_EIDLE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DISPERR_SEQ_MATCH |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_DIVRESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_EN_HI_LR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_EYESCAN_VS_CODE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_EYESCAN_VS_NEG_DIR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_EYESCAN_VS_RANGE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_EYESCAN_VS_UT_SIGN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_FABINT_USRCLK_FLOP |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_INT_DATAWIDTH |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_PMA_POWER_SAVE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_PROGDIV_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_SAMPLE_PERIOD |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_SIG_VALID_DLY |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_SUM_DFETAPREP_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_SUM_IREF_TUNE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_SUM_RES_CTRL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_SUM_VCMTUNE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_SUM_VCM_OVWR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_SUM_VREF_TUNE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_TUNE_AFE_OS |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_WIDEMODE_CDR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| RX_XCLK_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SAS_MAX_COM |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SAS_MIN_COM |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SATA_BURST_SEQ_LEN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SATA_BURST_VAL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SATA_CPLL_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SATA_EIDLE_VAL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SATA_MAX_BURST |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SATA_MAX_INIT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SATA_MAX_WAKE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SATA_MIN_BURST |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SATA_MIN_INIT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SATA_MIN_WAKE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| SHOW_REALIGN_COMMA |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TAPDLY_SET_TX |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TEMPERATUR_PAR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TERM_RCAL_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TERM_RCAL_OVRD |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TRANS_TIME_RATE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TST_RSV0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TST_RSV1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXBUF_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXBUF_RESET_ON_RATE_CHANGE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXDLY_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXDLY_LCFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXDRVBIAS_N |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXDRVBIAS_P |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXFIFO_ADDR_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXGBOX_FIFO_INIT_RD_ADDR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXGEARBOX_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXOUT_DIV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPCSRESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPHDLY_CFG[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPHDLY_CFG[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPH_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPH_MONITOR_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_CFG0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_CFG1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_CFG2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_CFG3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_CFG4 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_CFG5 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_GRAY_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_INVSTROBE_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_LPM |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_PPMCLK_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_PPM_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_SYNFREQ_PPM |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPI_VREFSEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXPMARESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXSYNC_MULTILANE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXSYNC_OVRD |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TXSYNC_SKIP_DA |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_CLK25_DIV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_CLKMUX_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_DATA_WIDTH |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_DCD_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_DCD_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_DEEMPH0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_DEEMPH1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_DIVRESET_TIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_DRIVE_MODE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_EIDLE_ASSERT_DELAY |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_EIDLE_DEASSERT_DELAY |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_EML_PHI_TUNE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_FABINT_USRCLK_FLOP |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_IDLE_DATA_ZERO |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_INT_DATAWIDTH |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_LOOPBACK_DRIVE_HIZ |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MAINCURSOR_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MARGIN_FULL_0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MARGIN_FULL_1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MARGIN_FULL_2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MARGIN_FULL_3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MARGIN_FULL_4 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MARGIN_LOW_0 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MARGIN_LOW_1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MARGIN_LOW_2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MARGIN_LOW_3 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MARGIN_LOW_4 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_MODE_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_PMADATA_OPT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_PMA_POWER_SAVE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_PROGCLK_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_PROGDIV_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_QPI_STATUS_EN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_RXDETECT_CFG |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_RXDETECT_REF |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_SAMPLE_PERIOD |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_SARC_LPBK_ENB |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| TX_XCLK_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| USE_PCS_CLK_PHASE_SEL |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ||
| WB_MODE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) |
| BaseControl |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Base rate trigger divisor | |
| BaseRateCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Count of base rate triggers | |
| BsaAvgToWr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSA def num averages to record | |
| BsaAvgToWr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSA def num averages to record | |
| BsaCompleteRd |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSA complete read | |
| BsaCompleteWr |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSA complete write | |
| BsaDestSel[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSA def destination selection | |
| BsaDestSel[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSA def destination selection | |
| BsaNtoAvg[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSA def num acquisitions to average | |
| BsaNtoAvg[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSA def num acquisitions to average | |
| BsaRateSel[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSA def rate selection | |
| BsaRateSel[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | BSA def rate selection | |
| ClkCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Count of local 186M clock | |
| CountInterval |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Interval counters update period | |
| FixedRateDiv[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Fixed rate marker divisors | |
| FixedRateDiv[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Fixed rate marker divisors | |
| FixedRateDiv[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Fixed rate marker divisors | |
| FixedRateDiv[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Fixed rate marker divisors | |
| FixedRateDiv[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Fixed rate marker divisors | |
| FixedRateDiv[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Fixed rate marker divisors | |
| FixedRateDiv[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Fixed rate marker divisors | |
| FixedRateDiv[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Fixed rate marker divisors | |
| FixedRateDiv[8] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Fixed rate marker divisors | |
| FixedRateDiv[9] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Fixed rate marker divisors | |
| NAllowSeq |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of beam allow engines | |
| NArraysBsa |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of BSA arrays | |
| NBeamSeq |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of beam request engines | |
| NControlSeq |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of control sequence engines | |
| PllCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Count of PLL status changes | |
| PulseIdRd |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse ID read | |
| PulseIdWr |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse ID write | |
| RateReload |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Loads cached fixed rate marker divisors | |
| SeqAddrLen |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of beam sequence engines | |
| SyncErrCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Count of 71k sync errors | |
| TStampRd |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Time stamp read | |
| TStampWr |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Time stamp write | |
| TxInhibit |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Set transmit link inhibit | |
| TxLoopback |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Set transmit link loopback | |
| TxPolarity |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Invert transmit link polarity | |
| TxReset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Reset transmit link |
| BypassDoneCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Buffer bypass done count | |
| BypassResetCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Buffer bypass reset count | |
| BypassRst |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Buffer bypass reset status | |
| C_RxReset | Reset Rx Link | ||
| ClearRxCounters | Clear the Rx status counters. | ||
| ClkSel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select LCLS-I/LCLS-II Timing | |
| CrcErrCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | CRC error count | |
| FidCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Valid frame count | |
| FrameVersion |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Received timing frame version | |
| MsgDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LCLS-II timing frame pipeline delay (186MHz clks) | |
| MsgDelayRst |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Reset timing frame pipeline with new value | |
| RxClkCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Recovered clock count div 16 | |
| RxCountReset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Reset receive counters | |
| RxDecErrCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Receive 8b/10b decode error count | |
| RxDown |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx down latch status | |
| RxDspErrCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Receive disparity error count | |
| RxLinkUp |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Receive link status | |
| RxPolarity |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Invert receive link polarity | |
| RxReset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Reset receive link | |
| RxRstCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Receive link reset count | |
| TxClkCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Transmit clock counter div 16 | |
| VersionErr |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Version check error | |
| eofCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | End of frame count | |
| sofCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Start of frame count |
| APP_TYPE_G |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | See AmcCarrierPkg.vhd for defination | |
| CntRst |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Status Counter Reset | |
| MPS_SLOT_G |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | MPS_SLOT_G | |
| MpsPllLocked |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | MPS PLL Lock Status | |
| MpsRxLinkUP |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | MPS TX LinkUp[13:0] | |
| MpsRxLinkUpCnt | (not supported) | MPS RX LinkUp Counter[13:0] | |
| MpsTxLinkUP |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | MPS TX LinkUp | |
| MpsTxLinkUpCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | MPS TX LinkUp Counter | |
| RollOverEn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Status Counter Roll Over Enable | |
| RstCnt | Reset all the status counters |
| Cdcm6208 | (not supported) | Cdcm6208 Control Registers | |
| DIE_REVISION |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicates the silicon die revision (Read only): 2:0 DIE_REVISION 00X --> Engineering Prototypes 010 --> Production Materia | |
| LOS_REF |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Loss of reference input: 0 => Reference input present 1 => Loss of reference input. | |
| PLL_UNLOCK |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicates unlock status for PLL (digital):0 => PLL locked 1 => PLL unlocked | |
| SEL_REF |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicates Reference Selected for PLL:0 SEL_REF 0 => Primary 1 => Secondary | |
| VCO_VERSION |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicates the device version (Read only):5:3 VCO_VERSION 000 => CDCM6208V1 001 => CDCM6208V2 |
| ADDR_WIDTH_C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | AXI4 Address Bus Width (units of bits) | |
| DATA_BYTES_C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | AXI4 Data Bus Width (units of bits) | |
| Failed |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Failed Memory Test | |
| ID_BITS_C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | AXI4 ID Bus Width (units of bits) | |
| Passed |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Passed Memory Test | |
| ReadTimer |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Read Timer | |
| StartAddress |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Start Address | |
| StopAddress |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Stop Address | |
| WriteTimer |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Write Timer |
| Addr |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Address Register | |
| Addr32BitMode |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Enable 32-bit PROM mode | |
| Cmd |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Command Register | |
| Data | (not supported) | Data Register Array | |
| Test |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Scratch Pad tester register |
| OutputConfig[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output Configuration Register Array | |
| OutputConfig[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output Configuration Register Array | |
| OutputConfig[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output Configuration Register Array | |
| OutputConfig[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output Configuration Register Array |
| ADCOffset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Offset | |
| AOSR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Output Status Register | |
| AlarmThresholdReg12 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register 12 | |
| AlarmThresholdReg16 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register 16 | |
| AlarmThresholdReg_25_16[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [25:16] | |
| AlarmThresholdReg_25_16[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [25:16] | |
| AlarmThresholdReg_25_16[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [25:16] | |
| AlarmThresholdReg_25_16[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [25:16] | |
| AlarmThresholdReg_25_16[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [25:16] | |
| AlarmThresholdReg_25_16[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [25:16] | |
| AlarmThresholdReg_25_16[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [25:16] | |
| AlarmThresholdReg_25_16[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [25:16] | |
| AlarmThresholdReg_8_0[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [8:0] | |
| AlarmThresholdReg_8_0[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [8:0] | |
| AlarmThresholdReg_8_0[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [8:0] | |
| AlarmThresholdReg_8_0[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [8:0] | |
| AlarmThresholdReg_8_0[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [8:0] | |
| AlarmThresholdReg_8_0[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [8:0] | |
| AlarmThresholdReg_8_0[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [8:0] | |
| AlarmThresholdReg_8_0[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [8:0] | |
| AlarmThresholdReg_8_0[8] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Alarm Threshold Register [8:0] | |
| CONVSTR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | CONVST Register | |
| ConfigurationRegister[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Configuration Registers | |
| ConfigurationRegister[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Configuration Registers | |
| ConfigurationRegister[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Configuration Registers | |
| ConfigurationRegister[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Configuration Registers | |
| FlagRegister |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Flag Register | |
| GIER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Global Interrupt Enable Register | |
| GainError |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Gain Error | |
| I2C_Address |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | I2C Address | |
| IPIER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | IP Interrupt Enable Register | |
| IPISR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | IP Interrupt Status Register | |
| MAX_VUSER[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum VUSER[4:0] supply monitor measurement | |
| MAX_VUSER[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum VUSER[4:0] supply monitor measurement | |
| MAX_VUSER[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum VUSER[4:0] supply monitor measurement | |
| MAX_VUSER[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum VUSER[4:0] supply monitor measurement | |
| MIN_VUSER[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Minimum VUSER[4:0] supply monitor measurement | |
| MIN_VUSER[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Minimum VUSER[4:0] supply monitor measurement | |
| MIN_VUSER[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Minimum VUSER[4:0] supply monitor measurement | |
| MIN_VUSER[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Minimum VUSER[4:0] supply monitor measurement | |
| MaxTemp |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | maximum temperature measurement | |
| MaxVBRAM |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | maximum VBRAM measurement | |
| MaxVCCAUX |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | maximum VCCAUX measurement | |
| MaxVCCINT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | maximum VCCINT measurement | |
| MinTemp |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | minimum temperature measurement | |
| MinVBRAM |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | minimum VBRAM measurement | |
| MinVCCAUX |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | minimum VCCAUX measurement | |
| MinVCCINT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | minimum VCCINT measurement | |
| SR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Status Register | |
| SYSMONRR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | SYSMON Hard Macro Reset Register | |
| SequenceReg9 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sequence Register 9 | |
| SequenceReg_7_0[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sequence Register [7:0] | |
| SequenceReg_7_0[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sequence Register [7:0] | |
| SequenceReg_7_0[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sequence Register [7:0] | |
| SequenceReg_7_0[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sequence Register [7:0] | |
| SequenceReg_7_0[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sequence Register [7:0] | |
| SequenceReg_7_0[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sequence Register [7:0] | |
| SequenceReg_7_0[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sequence Register [7:0] | |
| SequenceReg_7_0[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sequence Register [7:0] | |
| SequenceRegister8 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sequence Register 8 | |
| SupplyOffset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Supply Offset | |
| Temperature |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Temperature's ADC value | |
| VAUXP_VAUXN | (not supported) | VAUXP_VAUXN's ADC values | |
| VBRAM |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VBRAM's ADC value | |
| VCCAUX |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VCCAUX's ADC value | |
| VCCINT |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VCCINT's ADC value | |
| VP_VN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VP/VN's ADC value | |
| VREFN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VREFN's ADC value | |
| VREFP |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VREFP's ADC value | |
| VUSER[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VUSER[4:0] supply monitor measurement | |
| VUSER[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VUSER[4:0] supply monitor measurement | |
| VUSER[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VUSER[4:0] supply monitor measurement | |
| VUSER[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VUSER[4:0] supply monitor measurement |
| BuildStamp | (not supported) | Firmware Build String | |
| DeviceDna |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Xilinx Device DNA value burned into FPGA | |
| DeviceId |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Device Identification (configued by generic) | |
| FdSerial |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Board ID value read from DS2411 chip | |
| FpgaReload |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Optional Reload the FPGA from the attached PROM | |
| FpgaReloadAddress |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Reload start address | |
| FpgaReloadHalt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Used to halt automatic reloads via AxiVersion | |
| FpgaVersion |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | FPGA Firmware Version Number | |
| GitHash | (not supported) | GIT SHA-1 Hash | |
| MasterReset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Optional User Reset | |
| ScratchPad |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Register to test reads and writes | |
| UpTimeCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of seconds since last reset | |
| UserConstants | (not supported) | Optional user input values |
| ClientRemoteIp |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ClientRemoteIp (big-Endian configuration) | |
| ClientRemotePort |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ClientRemotePort (big-Endian configuration) |
| ServerRemoteIp |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ServerRemoteIp (big-Endian configuration) | |
| ServerRemotePort |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ServerRemotePort (big-Endian configuration) |
| MemoryArray | (not supported) | Memory Array |
| Bandwidth[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Bandwidth (in units of bytes per second) | |
| Bandwidth[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Bandwidth (in units of bytes per second) | |
| C_CloseConn | Close connection request | ||
| C_InjectFault | Inject a single fault(for debug and test purposes only). Corrupts checksum during transmission | ||
| C_OpenConn | Open connection request | ||
| CloseConn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Close Connection Request (Send a RST Segment to peer and close the connection) | |
| ConnectionActive |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Connection Active | |
| CumAckTimeout |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Cumulative acknowledgment timeout [15:0] | |
| DropCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of dropped segments [31:0] | |
| ErrAck |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Error in acknowledgment mechanism. | |
| ErrConnTout |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Connection to peer timed out. Timeout defined in generic PEER_CONN_TIMEOUT_G (Default: 1000 ms) | |
| ErrMaxRetrans |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum retransmissions exceeded retransMax. | |
| ErrNullTout |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Null timeout reached (server) nullTout. | |
| ErrSsiFrameLen |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | SSI Frame length too long | |
| FrameRate[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Frame Rate (in units of Hz) | |
| FrameRate[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Frame Rate (in units of Hz) | |
| HeaderChksumEn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Header checksum: '1': Enable calculation and check, '0': Disable check and insert 0 in place of header checksum | |
| InitSeqN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Initial sequence number [7:0] | |
| InjectFault |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Inject fault to the next packet header checksum (Default '0'). Acts on rising edge - injects exactly one fault in next segment | |
| MaxCumAck |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum cumulative acknowledgments [7:0] | |
| MaxNumRetrans |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum number of retransmissions [7:0] | |
| MaxOutOfSeq |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Max out of sequence segments (EACK) [7:0] | |
| MaxOutsSeg |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum out standing segments [7:0] | |
| MaxSegSize |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum segment size [15:0] | |
| Mode |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Mode:'0': Use internal parameters from generics,'1': Use parameters from registers | |
| NullSegTimeout |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Null segment timeout [15:0] | |
| OpenConn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Open Connection Request (Server goes to listen state, Client actively requests the connection by sending SYN segment) | |
| ParamRejected |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Client rejected the connection (parameters out of range), Server proposed new parameters (parameters out of range) | |
| ReconnectCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Counts all reconnections from reset [31:0] | |
| RetransTimeout |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Retransmission timeout [15:0] | |
| RetransmitCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Counts all retransmission requests within the active connection [31:0] | |
| ValidCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of valid segments [31:0] | |
| Version |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Version register [3:0] |
| Bandwidth[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Bandwidth (in units of bytes per second) | |
| Bandwidth[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Bandwidth (in units of bytes per second) | |
| C_CloseConn | Close connection request | ||
| C_InjectFault | Inject a single fault(for debug and test purposes only). Corrupts checksum during transmission | ||
| C_OpenConn | Open connection request | ||
| CloseConn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Close Connection Request (Send a RST Segment to peer and close the connection) | |
| ConnectionActive |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Connection Active | |
| CumAckTimeout |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Cumulative acknowledgment timeout [15:0] | |
| DropCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of dropped segments [31:0] | |
| ErrAck |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Error in acknowledgment mechanism. | |
| ErrConnTout |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Connection to peer timed out. Timeout defined in generic PEER_CONN_TIMEOUT_G (Default: 1000 ms) | |
| ErrMaxRetrans |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum retransmissions exceeded retransMax. | |
| ErrNullTout |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Null timeout reached (server) nullTout. | |
| ErrSsiFrameLen |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | SSI Frame length too long | |
| FrameRate[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Frame Rate (in units of Hz) | |
| FrameRate[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Frame Rate (in units of Hz) | |
| HeaderChksumEn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Header checksum: '1': Enable calculation and check, '0': Disable check and insert 0 in place of header checksum | |
| InitSeqN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Initial sequence number [7:0] | |
| InjectFault |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Inject fault to the next packet header checksum (Default '0'). Acts on rising edge - injects exactly one fault in next segment | |
| MaxCumAck |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum cumulative acknowledgments [7:0] | |
| MaxNumRetrans |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum number of retransmissions [7:0] | |
| MaxOutOfSeq |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Max out of sequence segments (EACK) [7:0] | |
| MaxOutsSeg |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum out standing segments [7:0] | |
| MaxSegSize |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Maximum segment size [15:0] | |
| Mode |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Mode:'0': Use internal parameters from generics,'1': Use parameters from registers | |
| NullSegTimeout |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Null segment timeout [15:0] | |
| OpenConn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Open Connection Request (Server goes to listen state, Client actively requests the connection by sending SYN segment) | |
| ParamRejected |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Client rejected the connection (parameters out of range), Server proposed new parameters (parameters out of range) | |
| ReconnectCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Counts all reconnections from reset [31:0] | |
| RetransTimeout |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Retransmission timeout [15:0] | |
| RetransmitCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Counts all retransmission requests within the active connection [31:0] | |
| ValidCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of valid segments [31:0] | |
| Version |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Version register [3:0] |
| ServerRemoteIp |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ServerRemoteIp (big-Endian configuration) | |
| ServerRemotePort |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ServerRemotePort (big-Endian configuration) |
| ServerRemoteIp |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ServerRemoteIp (big-Endian configuration) | |
| ServerRemotePort |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ServerRemotePort (big-Endian configuration) |
| InitAmcCard | Initialization for AMC card's JESD modules |
| AdcReg_0x0000 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0002 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0003 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0004 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0005 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0006 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0010 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0011 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0012 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0013 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0014 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0015 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0019 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0047 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0060 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0061 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0062 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0063 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0070 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| Aligned_to_sysref |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Aligned_to_sysref | |
| CalibrateAdc | CalibrateAdc | ||
| Calibration_done |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Calibration_done | |
| Clock_ready |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Clock_ready | |
| ID_DEVICE_TYPE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_DEVICE_TYPE | |
| ID_MASKREV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_MASKREV | |
| ID_PROD_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_LOWER | |
| ID_PROD_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_UPPER | |
| ID_VNDR_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_LOWER | |
| ID_VNDR_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_UPPER | |
| Link_active |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Link_active | |
| PLL_lock |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | PLL_lock | |
| PowerDown | PowerDown | ||
| PowerUp | PowerUp | ||
| Realigned_to_sysref |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Realigned_to_sysref | |
| Sync_form_FPGA |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sync_form_FPGA |
| AdcReg_0x0000 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0002 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0003 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0004 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0005 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0006 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0010 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0011 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0012 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0013 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0014 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0015 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0019 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0047 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0060 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0061 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0062 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0063 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0070 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| Aligned_to_sysref |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Aligned_to_sysref | |
| CalibrateAdc | CalibrateAdc | ||
| Calibration_done |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Calibration_done | |
| Clock_ready |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Clock_ready | |
| ID_DEVICE_TYPE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_DEVICE_TYPE | |
| ID_MASKREV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_MASKREV | |
| ID_PROD_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_LOWER | |
| ID_PROD_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_UPPER | |
| ID_VNDR_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_LOWER | |
| ID_VNDR_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_UPPER | |
| Link_active |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Link_active | |
| PLL_lock |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | PLL_lock | |
| PowerDown | PowerDown | ||
| PowerUp | PowerUp | ||
| Realigned_to_sysref |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Realigned_to_sysref | |
| Sync_form_FPGA |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sync_form_FPGA |
| AdcData[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Data[3:0] | |
| AdcData[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Data[3:0] | |
| AdcData[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Data[3:0] | |
| AdcData[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Data[3:0] | |
| AdcValid |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Valid[3:0] | |
| AdcValidCnt[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Valid Transistion Counter[3:0] | |
| AdcValidCnt[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Valid Transistion Counter[3:0] | |
| AdcValidCnt[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Valid Transistion Counter[3:0] | |
| AdcValidCnt[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Valid Transistion Counter[3:0] | |
| AmcClkFreq |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | AMC Clock frequency (in units of Hz) | |
| CntRst |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Status counter reset | |
| LemoTrig |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LEMO Trigger | |
| LemoTrigCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LEMO Trigger counter | |
| LmkClkSel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Clock Select | |
| LmkRst |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Reset | |
| LmkSync |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK SYNC | |
| RollOverEn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Enable Status counter roll over | |
| VcoDac |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VCO's DAC Value | |
| VcoDacEnable |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VCO DAC Enable | |
| VcoDacSckConfig |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VCO DAC SCK Rate Configuration |
| EnableSync |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | EnableSync | |
| EnableSysRef |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | EnableSysRef | |
| ID_DEVICE_TYPE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_DEVICE_TYPE | |
| ID_MASKREV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_MASKREV | |
| ID_PROD_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_LOWER | |
| ID_PROD_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_UPPER | |
| ID_VNDR_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_LOWER | |
| ID_VNDR_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_UPPER | |
| InitLmk | Synchronise LMK internal counters. Warning this function will power off and power on all the system clocks | ||
| LmkReg_0x0000 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0002 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0100 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0101 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0103 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0104 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0105 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0106 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0107 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0108 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0109 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x010B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x010C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x010D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x010E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x010F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0110 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0111 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0113 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0114 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0115 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0116 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0117 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0118 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0119 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x011B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x011C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x011D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x011E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x011F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0120 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0121 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0123 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0124 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0125 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0126 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0127 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0128 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0129 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x012B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x012C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x012D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x012E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x012F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0130 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0131 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0133 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0134 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0135 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0136 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0137 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0138 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0139 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013A |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0140 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0141 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0142 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0143 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0144 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0145 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0146 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0147 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0148 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0149 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014A |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0150 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0151 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0152 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0153 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0154 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0155 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0156 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0157 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0158 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0159 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015A |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0160 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0161 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0162 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0163 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0164 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0165 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0166 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0167 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0168 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0169 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x016A |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x016B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x016C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x016D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x016E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0171 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0172 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0173 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0174 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x017C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x017D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| PwrDwnSysRef | Powerdown the sysref lines | ||
| PwrUpSysRef | Powerup the sysref lines | ||
| SyncBit |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | SyncBit |
| A11 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Matrix coefficient A11 for mapping (X;Y) => A*(U;V) + O | |
| A12 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Matrix coefficient A12 for mapping (X;Y) => A*(U;V) + O | |
| A21 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Matrix coefficient A21 for mapping (X;Y) => A*(U;V) + O | |
| A22 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Matrix coefficient A22 for mapping (X;Y) => A*(U;V) + O | |
| CalGRN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | 'Green' calibration data | |
| CalRED |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | 'Red' calibration data | |
| DeltaCal_GRN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | 'Green' calibration factor minus 1: GRNcalibr = GRN * (1+DeltaCal_GRN); normalized to 2^17 | |
| DeltaCal_RED |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | 'Red' calibration factor minus 1: REDcalibr = RED * (1+DeltaCal_RED); normalized to 2^17 | |
| FirmwareConfiguration | Mode for which FW was built | ||
| ForceUnlock |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Unlock a hung trigger arbiter (DEBUG ONLY) | |
| MuxBLU | Input mux to map 'Blue' channel | ||
| MuxGRN | Input mux to map 'Green' channel | ||
| MuxRED | Input mux to map 'Red' channel | ||
| MuxYLO | Input mux to map 'Yellow' channel | ||
| NumSamples |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Processing window size (370MHz samples) | |
| O_1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Offset O1 for mapping (X;Y) => A*(U;V) + O | |
| O_2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Offset O2 for mapping (X;Y) => A*(U;V) + O | |
| ReadingInvalid |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | X/Y/TMIT Invalid | |
| SoftCycle |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Result of a software-triggered cycle | |
| SoftTrig |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Soft-trigger an processing cycle | |
| Status |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Status (all bits) | |
| TMIT_U |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GRN+BLU | |
| TMIT_V |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | RED+YLO | |
| Tmit |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sum of amplitude Channels GRN+RED+BLU+YLO | |
| TmitScl |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Scale for TMIT (end result must fit into 18-bit signed); scaled to 2^16 | |
| TrigActive | State of Trigger Arbiter | ||
| TrigCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | # of triggers processed | |
| U |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | U position | |
| V |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | V position | |
| X |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | X position | |
| Y |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Y position |
| AttnA[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnA[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnA[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnA[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnB[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnB[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnB[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnB[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnCal |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| Cal_CALMode | Calibration Mode | ||
| Cal_ContTrig | Disable self-clearing of Cal_EnaTrig | ||
| Cal_EnaTrig | Calibration Trigger Enable (self-clearing unless Cal_ContTrig is set) | ||
| Cal_OSCMode | Calibration Oscillator Control | ||
| Delay_AMP2RF1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_OFFTIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_RF12RF2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_RF2Green |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_RF2Red |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_RFWIDTH |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_TRIG2AMP |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_Trig2Beam |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| InitFlag |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Bit to detect fpga reboot | |
| Scratch |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Scratchpad register | |
| SoftClear |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Software Clear | |
| SoftTrig |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Software Trigger |
| InitAmcCard | Initialization for AMC card's JESD modules |
| AdcReg_0x0000 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0002 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0003 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0004 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0005 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0006 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0010 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0011 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0012 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0013 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0014 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0015 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0019 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0047 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0060 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0061 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0062 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0063 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0070 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| Aligned_to_sysref |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Aligned_to_sysref | |
| CalibrateAdc | CalibrateAdc | ||
| Calibration_done |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Calibration_done | |
| Clock_ready |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Clock_ready | |
| ID_DEVICE_TYPE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_DEVICE_TYPE | |
| ID_MASKREV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_MASKREV | |
| ID_PROD_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_LOWER | |
| ID_PROD_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_UPPER | |
| ID_VNDR_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_LOWER | |
| ID_VNDR_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_UPPER | |
| Link_active |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Link_active | |
| PLL_lock |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | PLL_lock | |
| PowerDown | PowerDown | ||
| PowerUp | PowerUp | ||
| Realigned_to_sysref |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Realigned_to_sysref | |
| Sync_form_FPGA |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sync_form_FPGA |
| AdcReg_0x0000 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0002 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0003 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0004 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0005 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0006 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x000F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0010 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0011 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0012 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0013 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0014 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0015 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0019 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x003D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0047 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0060 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0061 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0062 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0063 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| AdcReg_0x0070 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Control Registers | |
| Aligned_to_sysref |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Aligned_to_sysref | |
| CalibrateAdc | CalibrateAdc | ||
| Calibration_done |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Calibration_done | |
| Clock_ready |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Clock_ready | |
| ID_DEVICE_TYPE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_DEVICE_TYPE | |
| ID_MASKREV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_MASKREV | |
| ID_PROD_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_LOWER | |
| ID_PROD_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_UPPER | |
| ID_VNDR_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_LOWER | |
| ID_VNDR_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_UPPER | |
| Link_active |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Link_active | |
| PLL_lock |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | PLL_lock | |
| PowerDown | PowerDown | ||
| PowerUp | PowerUp | ||
| Realigned_to_sysref |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Realigned_to_sysref | |
| Sync_form_FPGA |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sync_form_FPGA |
| AdcData[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Data[3:0] | |
| AdcData[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Data[3:0] | |
| AdcData[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Data[3:0] | |
| AdcData[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Data[3:0] | |
| AdcValid |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Valid[3:0] | |
| AdcValidCnt[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Valid Transistion Counter[3:0] | |
| AdcValidCnt[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Valid Transistion Counter[3:0] | |
| AdcValidCnt[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Valid Transistion Counter[3:0] | |
| AdcValidCnt[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ADC Valid Transistion Counter[3:0] | |
| AmcClkFreq |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | AMC Clock frequency (in units of Hz) | |
| CntRst |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Status counter reset | |
| LemoTrig |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LEMO Trigger | |
| LemoTrigCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LEMO Trigger counter | |
| LmkClkSel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Clock Select | |
| LmkRst |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Reset | |
| LmkSync |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK SYNC | |
| RollOverEn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Enable Status counter roll over | |
| VcoDac |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VCO's DAC Value | |
| VcoDacEnable |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VCO DAC Enable | |
| VcoDacSckConfig |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | VCO DAC SCK Rate Configuration |
| EnableSync |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | EnableSync | |
| EnableSysRef |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | EnableSysRef | |
| ID_DEVICE_TYPE |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_DEVICE_TYPE | |
| ID_MASKREV |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_MASKREV | |
| ID_PROD_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_LOWER | |
| ID_PROD_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_PROD_UPPER | |
| ID_VNDR_LOWER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_LOWER | |
| ID_VNDR_UPPER |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ID_VNDR_UPPER | |
| InitLmk | Synchronise LMK internal counters. Warning this function will power off and power on all the system clocks | ||
| LmkReg_0x0000 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0002 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0100 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0101 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0103 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0104 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0105 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0106 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0107 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0108 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0109 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x010B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x010C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x010D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x010E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x010F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0110 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0111 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0113 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0114 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0115 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0116 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0117 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0118 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0119 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x011B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x011C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x011D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x011E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x011F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0120 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0121 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0123 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0124 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0125 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0126 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0127 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0128 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0129 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x012B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x012C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x012D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x012E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x012F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0130 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0131 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0133 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0134 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0135 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0136 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0137 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0138 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0139 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013A |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x013F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0140 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0141 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0142 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0143 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0144 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0145 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0146 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0147 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0148 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0149 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014A |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x014F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0150 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0151 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0152 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0153 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0154 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0155 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0156 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0157 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0158 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0159 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015A |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x015F |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0160 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0161 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0162 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0163 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0164 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0165 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0166 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0167 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0168 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0169 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x016A |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x016B |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x016C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x016D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x016E |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0171 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0172 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0173 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x0174 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x017C |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| LmkReg_0x017D |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | LMK Registers | |
| PwrDwnSysRef | Powerdown the sysref lines | ||
| PwrUpSysRef | Powerup the sysref lines | ||
| SyncBit |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | SyncBit |
| A11 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Matrix coefficient A11 for mapping (X;Y) => A*(U;V) + O | |
| A12 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Matrix coefficient A12 for mapping (X;Y) => A*(U;V) + O | |
| A21 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Matrix coefficient A21 for mapping (X;Y) => A*(U;V) + O | |
| A22 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Matrix coefficient A22 for mapping (X;Y) => A*(U;V) + O | |
| CalGRN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | 'Green' calibration data | |
| CalRED |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | 'Red' calibration data | |
| DeltaCal_GRN |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | 'Green' calibration factor minus 1: GRNcalibr = GRN * (1+DeltaCal_GRN); normalized to 2^17 | |
| DeltaCal_RED |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | 'Red' calibration factor minus 1: REDcalibr = RED * (1+DeltaCal_RED); normalized to 2^17 | |
| FirmwareConfiguration | Mode for which FW was built | ||
| ForceUnlock |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Unlock a hung trigger arbiter (DEBUG ONLY) | |
| MuxBLU | Input mux to map 'Blue' channel | ||
| MuxGRN | Input mux to map 'Green' channel | ||
| MuxRED | Input mux to map 'Red' channel | ||
| MuxYLO | Input mux to map 'Yellow' channel | ||
| NumSamples |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Processing window size (370MHz samples) | |
| O_1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Offset O1 for mapping (X;Y) => A*(U;V) + O | |
| O_2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Offset O2 for mapping (X;Y) => A*(U;V) + O | |
| ReadingInvalid |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | X/Y/TMIT Invalid | |
| SoftCycle |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Result of a software-triggered cycle | |
| SoftTrig |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Soft-trigger an processing cycle | |
| Status |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Status (all bits) | |
| TMIT_U |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GRN+BLU | |
| TMIT_V |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | RED+YLO | |
| Tmit |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sum of amplitude Channels GRN+RED+BLU+YLO | |
| TmitScl |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Scale for TMIT (end result must fit into 18-bit signed); scaled to 2^16 | |
| TrigActive | State of Trigger Arbiter | ||
| TrigCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | # of triggers processed | |
| U |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | U position | |
| V |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | V position | |
| X |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | X position | |
| Y |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Y position |
| AttnA[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnA[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnA[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnA[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnB[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnB[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnB[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnB[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| AttnCal |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation value. b0: 1dB, b1: 2dB, b2: 4dB, b3: 8dB, b4: 16dB (Active low) | |
| Cal_CALMode | Calibration Mode | ||
| Cal_ContTrig | Disable self-clearing of Cal_EnaTrig | ||
| Cal_EnaTrig | Calibration Trigger Enable (self-clearing unless Cal_ContTrig is set) | ||
| Cal_OSCMode | Calibration Oscillator Control | ||
| Delay_AMP2RF1 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_OFFTIME |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_RF12RF2 |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_RF2Green |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_RF2Red |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_RFWIDTH |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_TRIG2AMP |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| Delay_Trig2Beam |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Delay | |
| InitFlag |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Bit to detect fpga reboot | |
| Scratch |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Scratchpad register | |
| SoftClear |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Software Clear | |
| SoftTrig |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Software Trigger |
| Command | State (start/stop) control | ||
| GitVersion | Git firmware version string | ||
| NumRx |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of channels | |
| PeriodFract |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Period (pulse repetition); fractional part * 2^17 | |
| PeriodInt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Period (pulse repetition); integer part in cycles) | |
| State | Current state readback | ||
| Version |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Register layout version |
| FilterCoeffs | (not supported) | Filter coefficients | |
| NoiseAtt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation for noise (log) | |
| NumPolesAndZeros |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of sections with support for zeros and poles | |
| NumPolesOnly |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of sections with support for poles only | |
| PeriodFractOffset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Period (pulse repetition) offset; fractional part * 2^17 | |
| PeriodIntOffset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Period (pulse repetition) offset; integer part in cycles) | |
| PipelineDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latency due to pipelining (cycles) | |
| PolyCoeffs | (not supported) | Coefficients for polynomial approximation | |
| PolyCompDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latency of polynomial computations (cycles) | |
| PolyOrder |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Order of polynomial approximation | |
| QScale |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Amplitude (scale) | |
| TrigDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Trigger latency (cycles) | |
| Version |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Register layout version |
| FilterCoeffs | (not supported) | Filter coefficients | |
| NoiseAtt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation for noise (log) | |
| NumPolesAndZeros |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of sections with support for zeros and poles | |
| NumPolesOnly |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of sections with support for poles only | |
| PeriodFractOffset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Period (pulse repetition) offset; fractional part * 2^17 | |
| PeriodIntOffset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Period (pulse repetition) offset; integer part in cycles) | |
| PipelineDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latency due to pipelining (cycles) | |
| PolyCoeffs | (not supported) | Coefficients for polynomial approximation | |
| PolyCompDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latency of polynomial computations (cycles) | |
| PolyOrder |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Order of polynomial approximation | |
| QScale |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Amplitude (scale) | |
| TrigDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Trigger latency (cycles) | |
| Version |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Register layout version |
| FilterCoeffs | (not supported) | Filter coefficients | |
| NoiseAtt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation for noise (log) | |
| NumPolesAndZeros |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of sections with support for zeros and poles | |
| NumPolesOnly |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of sections with support for poles only | |
| PeriodFractOffset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Period (pulse repetition) offset; fractional part * 2^17 | |
| PeriodIntOffset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Period (pulse repetition) offset; integer part in cycles) | |
| PipelineDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latency due to pipelining (cycles) | |
| PolyCoeffs | (not supported) | Coefficients for polynomial approximation | |
| PolyCompDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latency of polynomial computations (cycles) | |
| PolyOrder |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Order of polynomial approximation | |
| QScale |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Amplitude (scale) | |
| TrigDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Trigger latency (cycles) | |
| Version |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Register layout version |
| FilterCoeffs | (not supported) | Filter coefficients | |
| NoiseAtt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Attenuation for noise (log) | |
| NumPolesAndZeros |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of sections with support for zeros and poles | |
| NumPolesOnly |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of sections with support for poles only | |
| PeriodFractOffset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Period (pulse repetition) offset; fractional part * 2^17 | |
| PeriodIntOffset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Period (pulse repetition) offset; integer part in cycles) | |
| PipelineDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latency due to pipelining (cycles) | |
| PolyCoeffs | (not supported) | Coefficients for polynomial approximation | |
| PolyCompDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latency of polynomial computations (cycles) | |
| PolyOrder |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Order of polynomial approximation | |
| QScale |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Amplitude (scale) | |
| TrigDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Trigger latency (cycles) | |
| Version |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Register layout version |
| ChannelDestSel | (not supported) | Channel event destination selection | |
| ChannelEnable | (not supported) | Enable readout channel | |
| ChannelEventCnt | (not supported) | Channel event counts | |
| ChannelRateSel | (not supported) | ||
| CountReset |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Counter reset | |
| GlobalEventCnt |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Global Event count | |
| GtxDebug |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Debug bits from link | |
| LinkAddr |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Physical link address | |
| ModeSel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select LCLS-I/LCLS-II Trigger outputs (0/1) | |
| TriggerChannel | (not supported) | Channel used for event selection | |
| TriggerDelay | (not supported) | Trigger delay (186MHz clocks) | |
| TriggerEnable | (not supported) | Trigger enable | |
| TriggerFineDelay | (not supported) | Trigger fine delay (82.2 ps steps) | |
| TriggerPolarity | (not supported) | Trigger polarity (0=negative, 1=positive) | |
| TriggerWidth | (not supported) | Trigger width (186MHz clocks) |
| Amc1SimMux | Switch Mux between simulator and ADC (AMC1) | ||
| FirmwareConfigurationAMC0 | Firmware configuration for Bay 0 | ||
| FirmwareConfigurationAMC1 | Firmware configuration for Bay 1 | ||
| FirmwareConfigurationRTM | Firmware configuration for RTM | ||
| RtmTrig0Sel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select source (pulsegen) for RTM Trigger 0 | |
| RtmTrig1Sel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select source (pulsegen) for RTM Trigger 1 | |
| RtmTrig2Sel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select source (pulsegen) for RTM Trigger 2 | |
| RtmTrig3Sel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select source (pulsegen) for RTM Trigger 3 | |
| RtmTrig4Sel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select source (pulsegen) for RTM Trigger 4 | |
| RtmTrig5Sel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select source (pulsegen) for RTM Trigger 5 | |
| RtmTrig6Sel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select source (pulsegen) for RTM Trigger 6 | |
| RtmTrig7Sel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select source (pulsegen) for RTM Trigger 7 | |
| RtmTrigSel |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Select sources (pulsegens) for all RTM Triggers in a single word (4-bit per trigger) |
| QSCL | (not supported) | Table of Grn, Red, Blu, Ylo, ... |
| AlignErr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| ClearErrors |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Clear Jesd Errors and reset the status counters. | |
| ClearRxErrors | Clear the registered errors of all RX lanes | ||
| CommaDetected[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| DataValid[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DisparityErr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| ElBuffLatency[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| Enable |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Enable mask. Example: 0x3F Enable ln0 to ln5. | |
| GTReady[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| InvertAdcData |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Mask Enable the ADC data inversion. 1-Inverted, 0-normal. | |
| InvertSync | Invert Sync. Sync output has to be inverted in some systems depending on signal polarities on the PCB. | ||
| LinkErrMask |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Mask Enable the errors that are required to brake the link. bit 5-0: positionErr - s_bufOvf - s_bufUnf - dispErr - decErr - s_alignErr | |
| NotInTableErr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| PositionErr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| RawData[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| ReplaceEnable | ReplaceEnable. Replace the control characters with data. (Should be 1 use 0 only for debug). | ||
| ResetGTs |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ResetGTs. Request reset of the GT modules. | |
| ResetRxGTs | Toggle the reset of all RX MGTs | ||
| RxBuffOfl[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxEnabled[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| ScrambleEnable | ScrambleEnable. Enable data scrambling (More info in Jesd204b standard). | ||
| StatusValidCnt[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| SubClass |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b SubClass. 0 - For designs without sysref (no fixed latency). 1 - Fixed latency. | |
| SysRefDetected[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysrefDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sets the system reference delay in clock cycles. Use if you want to reduce the latency (The latency is indicated by ElBuffLatency status). | |
| ThresholdHigh[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| nSync[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. |
| AlignErr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| AlignErr[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Character Alignment Error. The control characters in the data are missaligned. This error will trigger JESD re-synchronisation. | |
| ClearErrors |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Clear Jesd Errors and reset the status counters. | |
| ClearRxErrors | Clear the registered errors of all RX lanes | ||
| CommaDetected[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| CommaDetected[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The K28.5 characters detected in the serial stream. | |
| DataValid[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DataValid[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd Data Valid. Goes high after the code synchronisation and ILAS sequence is complete (More info in Jesd204b standard). | |
| DisparityErr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| DisparityErr[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Latched High when the data byte on RXDATA arrives with the wrong disparity. Indicates bad serial connection (Check HW). | |
| ElBuffLatency[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| ElBuffLatency[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b elastic buffer latency in c-c. Can be adjusted by Sysref delay. | |
| Enable |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Enable mask. Example: 0x3F Enable ln0 to ln5. | |
| GTReady[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| GTReady[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | GT Ready. Jesd clock ok PLLs are locked and GT is ready to receive data. | |
| InvertAdcData |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Mask Enable the ADC data inversion. 1-Inverted, 0-normal. | |
| InvertSync | Invert Sync. Sync output has to be inverted in some systems depending on signal polarities on the PCB. | ||
| LinkErrMask |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Mask Enable the errors that are required to brake the link. bit 5-0: positionErr - s_bufOvf - s_bufUnf - dispErr - decErr - s_alignErr | |
| NotInTableErr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| NotInTableErr[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | NotInTableErr. When GT decoder received s 10-bit character that cannot be mapped into a valid 8B/10B character. Indicates bad serial connection (Check HW). | |
| PositionErr[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| PositionErr[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The position of K28.5 character during code group synchronisation is wrong. This error will trigger JESD re-synchronisation. | |
| RawData[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| RawData[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw data from GT. | |
| ReplaceEnable | ReplaceEnable. Replace the control characters with data. (Should be 1 use 0 only for debug). | ||
| ResetGTs |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | ResetGTs. Request reset of the GT modules. | |
| ResetRxGTs | Toggle the reset of all RX MGTs | ||
| RxBuffOfl[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffOfl[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd elastic buffer overflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxBuffUfl[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd sync fifo buffer undeflow. This error will trigger JESD re-synchronisation. | |
| RxEnabled[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| RxEnabled[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Rx Lane Enabled. Indicates if the lane had been enabled in configuration. | |
| ScrambleEnable | ScrambleEnable. Enable data scrambling (More info in Jesd204b standard). | ||
| StatusValidCnt[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| StatusValidCnt[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | StatusValidCnt. Shows stability of JESD lanes. Counts number of JESD re-syncronisations. | |
| SubClass |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Jesd204b SubClass. 0 - For designs without sysref (no fixed latency). 1 - Fixed latency. | |
| SysRefDetected[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysRefDetected[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | System Reference input has been Detected. | |
| SysrefDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Sets the system reference delay in clock cycles. Use if you want to reduce the latency (The latency is indicated by ElBuffLatency status). | |
| ThresholdHigh[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdHigh[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_High. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| ThresholdLow[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Threshold_Low. Debug funtionality. Threshold for generating a digital signal from the ADC data. | |
| nSync[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. | |
| nSync[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Synchronisation request. 0 - Not synchronised. 1 - Indicades that code group synchronisation has been completed. |
| IsrSelect |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | 0x1 = Software ISR, 0x0 = Firmware ISR |
| Control |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Control Register | |
| EvCntLatch |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Timestamp Event Counter Latch | |
| EventCounter |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Timestamp Event Counter | |
| ExtEventCode |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | External Event Code | |
| ExtEventEn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | External Event Enable | |
| FWVersion |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Firmware Version Register | |
| FWVersionUnmasked |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Firmware Version without 0x1F mask and byte swapped | |
| IntEventCode |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Internal Event Code | |
| IntEventCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Internal Event Count | |
| IntEventEn |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Internal Event Enable | |
| IrqEnable |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Interrupt Enable Register | |
| IrqFlag |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Interrupt Flag Register | |
| MapRam1 | (not supported) | Event Mapping RAM 1 [1023:0] | |
| MapRam2 | (not supported) | Event Mapping RAM 2 [1023:0] | |
| OutputMap | (not supported) | Front Panel Output Map Registers [11:0] | |
| PcieIntEna |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | PCIe interrupt Enable and state status | |
| Pulse00[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 0 Registers | |
| Pulse00[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 0 Registers | |
| Pulse00[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 0 Registers | |
| Pulse00[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 0 Registers | |
| Pulse01[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 1 Registers | |
| Pulse01[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 1 Registers | |
| Pulse01[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 1 Registers | |
| Pulse01[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 1 Registers | |
| Pulse02[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 2 Registers | |
| Pulse02[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 2 Registers | |
| Pulse02[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 2 Registers | |
| Pulse02[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 2 Registers | |
| Pulse03[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 3 Registers | |
| Pulse03[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 3 Registers | |
| Pulse03[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 3 Registers | |
| Pulse03[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 3 Registers | |
| Pulse04[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 4 Registers | |
| Pulse04[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 4 Registers | |
| Pulse04[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 4 Registers | |
| Pulse04[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 4 Registers | |
| Pulse05[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 5 Registers | |
| Pulse05[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 5 Registers | |
| Pulse05[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 5 Registers | |
| Pulse05[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 5 Registers | |
| Pulse06[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 6 Registers | |
| Pulse06[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 6 Registers | |
| Pulse06[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 6 Registers | |
| Pulse06[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 6 Registers | |
| Pulse07[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 7 Registers | |
| Pulse07[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 7 Registers | |
| Pulse07[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 7 Registers | |
| Pulse07[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 7 Registers | |
| Pulse08[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 8 Registers | |
| Pulse08[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 8 Registers | |
| Pulse08[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 8 Registers | |
| Pulse08[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 8 Registers | |
| Pulse09[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 9 Registers | |
| Pulse09[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 9 Registers | |
| Pulse09[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 9 Registers | |
| Pulse09[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 9 Registers | |
| Pulse10[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 10 Registers | |
| Pulse10[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 10 Registers | |
| Pulse10[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 10 Registers | |
| Pulse10[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 10 Registers | |
| Pulse11[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 11 Registers | |
| Pulse11[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 11 Registers | |
| Pulse11[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 11 Registers | |
| Pulse11[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse 11 Registers | |
| PulseIrqMap |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Mapping register for pulse interrupt | |
| SecCounter |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Timestamp Seconds Counter | |
| SecLatch |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Timestamp Seconds Counter Latch | |
| SecSR |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Seconds Shift Register | |
| Status |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Status Register | |
| UsecDivider |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Divider to get from Event Clock to 1 MHz |
| OpCodeMask[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Opcode mask 256 bits to connect the pulse to any combination of opcodes | |
| OpCodeMask[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Opcode mask 256 bits to connect the pulse to any combination of opcodes | |
| OpCodeMask[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Opcode mask 256 bits to connect the pulse to any combination of opcodes | |
| OpCodeMask[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Opcode mask 256 bits to connect the pulse to any combination of opcodes | |
| OpCodeMask[4] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Opcode mask 256 bits to connect the pulse to any combination of opcodes | |
| OpCodeMask[5] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Opcode mask 256 bits to connect the pulse to any combination of opcodes | |
| OpCodeMask[6] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Opcode mask 256 bits to connect the pulse to any combination of opcodes | |
| OpCodeMask[7] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Opcode mask 256 bits to connect the pulse to any combination of opcodes | |
| PulseDelay |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse delay (Number of recovered clock cycles) | |
| PulsePolarity |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse polarity: 0-Normal. 1-Inverted | |
| PulseWidth |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Pulse Width (Number of recovered clock cycles) |
| ArmHwTrigger | Arm Hardware Trigger. | ||
| Bsa[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | bsa(0) - edefAvgDn, bsa(1) - edefMinor, bsa(2) - edefMajor, bsa(3) - edefInit | |
| Bsa[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | bsa(0) - edefAvgDn, bsa(1) - edefMinor, bsa(2) - edefMajor, bsa(3) - edefInit | |
| Bsa[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | bsa(0) - edefAvgDn, bsa(1) - edefMinor, bsa(2) - edefMajor, bsa(3) - edefInit | |
| Bsa[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | bsa(0) - edefAvgDn, bsa(1) - edefMinor, bsa(2) - edefMajor, bsa(3) - edefInit | |
| ClearTrigStatus | Clear the status. | ||
| DaqMode | Select the data ackuisition mode. | ||
| DataBufferSize |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of 32-bit words. Minimum size is 4. | |
| DecimationAveraging[0] | Decimation Averaging. | ||
| DecimationAveraging[1] | Decimation Averaging. | ||
| DecimationAveraging[2] | Decimation Averaging. | ||
| DecimationAveraging[3] | Decimation Averaging. | ||
| DecimationRateDiv |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Averaging Enabled: (powers of two) 1,2,4,8,16,etc (max 2^12). Averaging Disabled (32-bit): 1,2,3,4,etc (max 2^16-1). Averaging Disabled (16-bit): 1,2,4,6,8,etc (max 2^16-1). | |
| FormatDataWidth[0] | Data width 32-bit or 16-bit. | ||
| FormatDataWidth[1] | Data width 32-bit or 16-bit. | ||
| FormatDataWidth[2] | Data width 32-bit or 16-bit. | ||
| FormatDataWidth[3] | Data width 32-bit or 16-bit. | ||
| FormatSign[0] | Sign format. | ||
| FormatSign[1] | Sign format. | ||
| FormatSign[2] | Sign format. | ||
| FormatSign[3] | Sign format. | ||
| FormatSignWidth[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicating sign extension point. | |
| FormatSignWidth[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicating sign extension point. | |
| FormatSignWidth[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicating sign extension point. | |
| FormatSignWidth[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicating sign extension point. | |
| FrameCnt[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of 4096 byte frames sent. | |
| FrameCnt[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of 4096 byte frames sent. | |
| FrameCnt[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of 4096 byte frames sent. | |
| FrameCnt[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of 4096 byte frames sent. | |
| FreezeBuffers | Freeze circular buffers from software. | ||
| FreezeHwMask | Mask for enabling/disabling hardware freaze buffer request. | ||
| FreezeStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Freeze Buffers Status (Registered on first freeze until cleared by TriggerClearStatus) | |
| FreezeSw |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Software freeze buffer (Freezes all enabled circular buffers). | |
| InputDataValid[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The incoming data is Valid (Usually connected to JESD valid signal). | |
| InputDataValid[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The incoming data is Valid (Usually connected to JESD valid signal). | |
| InputDataValid[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The incoming data is Valid (Usually connected to JESD valid signal). | |
| InputDataValid[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The incoming data is Valid (Usually connected to JESD valid signal). | |
| InputMuxSel[0] | Input Mux select. Maximum number of channels is 29. | ||
| InputMuxSel[1] | Input Mux select. Maximum number of channels is 29. | ||
| InputMuxSel[2] | Input Mux select. Maximum number of channels is 29. | ||
| InputMuxSel[3] | Input Mux select. Maximum number of channels is 29. | ||
| PacketHeaderEn | Applies only to Triggered mode. | ||
| StreamEnabled[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output stream enabled. | |
| StreamEnabled[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output stream enabled. | |
| StreamEnabled[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output stream enabled. | |
| StreamEnabled[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output stream enabled. | |
| StreamError[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Error during last Acquisition (Raw diagnostic stream control Ready or incoming data valid dropped). | |
| StreamError[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Error during last Acquisition (Raw diagnostic stream control Ready or incoming data valid dropped). | |
| StreamError[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Error during last Acquisition (Raw diagnostic stream control Ready or incoming data valid dropped). | |
| StreamError[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Error during last Acquisition (Raw diagnostic stream control Ready or incoming data valid dropped). | |
| StreamOverflow[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Overflow. | |
| StreamOverflow[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Overflow. | |
| StreamOverflow[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Overflow. | |
| StreamOverflow[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Overflow. | |
| StreamPause[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Pause. | |
| StreamPause[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Pause. | |
| StreamPause[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Pause. | |
| StreamPause[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Pause. | |
| StreamReady[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Ready. | |
| StreamReady[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Ready. | |
| StreamReady[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Ready. | |
| StreamReady[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Ready. | |
| Timestamp[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Timestamp 63:0 | |
| Timestamp[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Timestamp 63:0 | |
| TrigCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Counts valid data acquisition triggers. | |
| TriggerCascMask | Mask for enabling/disabling cascaded trigger. | ||
| TriggerCascStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Cascade Trigger Status (Registered on first trigger until cleared by TriggerClearStatus). | |
| TriggerClearStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Trigger status will be cleared (On the rising edge). | |
| TriggerDaq | Trigger data aquisition from software. | ||
| TriggerHwArm |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Arm the Hardware trigger (On the rising edge). After trigger occurs the trigger has to be rearmed. | |
| TriggerHwArmed |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Hardware Trigger Armed Status (Registered on rising edge Control(3) and cleared when Hw trigger occurs). | |
| TriggerHwAutoRearm | Mask for enabling/disabling hardware trigger. If disabled it has to be rearmed by ArmHwTrigger. | ||
| TriggerHwStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Hardware Trigger Status (Registered on first trigger until cleared by TriggerClearStatus). | |
| TriggerStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Combined Trigger Status (Registered on first trigger until cleared by TriggerClearStatus). | |
| TriggerSw |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Software Trigger (triggers DAQ on all enabled channels). | |
| TriggerSwStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Software Trigger Status (Registered on first trigger until cleared by TriggerClearStatus). |
| ArmHwTrigger | Arm Hardware Trigger. | ||
| Bsa[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | bsa(0) - edefAvgDn, bsa(1) - edefMinor, bsa(2) - edefMajor, bsa(3) - edefInit | |
| Bsa[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | bsa(0) - edefAvgDn, bsa(1) - edefMinor, bsa(2) - edefMajor, bsa(3) - edefInit | |
| Bsa[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | bsa(0) - edefAvgDn, bsa(1) - edefMinor, bsa(2) - edefMajor, bsa(3) - edefInit | |
| Bsa[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | bsa(0) - edefAvgDn, bsa(1) - edefMinor, bsa(2) - edefMajor, bsa(3) - edefInit | |
| ClearTrigStatus | Clear the status. | ||
| DaqMode | Select the data ackuisition mode. | ||
| DataBufferSize |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of 32-bit words. Minimum size is 4. | |
| DecimationAveraging[0] | Decimation Averaging. | ||
| DecimationAveraging[1] | Decimation Averaging. | ||
| DecimationAveraging[2] | Decimation Averaging. | ||
| DecimationAveraging[3] | Decimation Averaging. | ||
| DecimationRateDiv |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Averaging Enabled: (powers of two) 1,2,4,8,16,etc (max 2^12). Averaging Disabled (32-bit): 1,2,3,4,etc (max 2^16-1). Averaging Disabled (16-bit): 1,2,4,6,8,etc (max 2^16-1). | |
| FormatDataWidth[0] | Data width 32-bit or 16-bit. | ||
| FormatDataWidth[1] | Data width 32-bit or 16-bit. | ||
| FormatDataWidth[2] | Data width 32-bit or 16-bit. | ||
| FormatDataWidth[3] | Data width 32-bit or 16-bit. | ||
| FormatSign[0] | Sign format. | ||
| FormatSign[1] | Sign format. | ||
| FormatSign[2] | Sign format. | ||
| FormatSign[3] | Sign format. | ||
| FormatSignWidth[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicating sign extension point. | |
| FormatSignWidth[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicating sign extension point. | |
| FormatSignWidth[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicating sign extension point. | |
| FormatSignWidth[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Indicating sign extension point. | |
| FrameCnt[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of 4096 byte frames sent. | |
| FrameCnt[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of 4096 byte frames sent. | |
| FrameCnt[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of 4096 byte frames sent. | |
| FrameCnt[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Number of 4096 byte frames sent. | |
| FreezeBuffers | Freeze circular buffers from software. | ||
| FreezeHwMask | Mask for enabling/disabling hardware freaze buffer request. | ||
| FreezeStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Freeze Buffers Status (Registered on first freeze until cleared by TriggerClearStatus) | |
| FreezeSw |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Software freeze buffer (Freezes all enabled circular buffers). | |
| InputDataValid[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The incoming data is Valid (Usually connected to JESD valid signal). | |
| InputDataValid[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The incoming data is Valid (Usually connected to JESD valid signal). | |
| InputDataValid[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The incoming data is Valid (Usually connected to JESD valid signal). | |
| InputDataValid[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | The incoming data is Valid (Usually connected to JESD valid signal). | |
| InputMuxSel[0] | Input Mux select. Maximum number of channels is 29. | ||
| InputMuxSel[1] | Input Mux select. Maximum number of channels is 29. | ||
| InputMuxSel[2] | Input Mux select. Maximum number of channels is 29. | ||
| InputMuxSel[3] | Input Mux select. Maximum number of channels is 29. | ||
| PacketHeaderEn | Applies only to Triggered mode. | ||
| StreamEnabled[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output stream enabled. | |
| StreamEnabled[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output stream enabled. | |
| StreamEnabled[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output stream enabled. | |
| StreamEnabled[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Output stream enabled. | |
| StreamError[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Error during last Acquisition (Raw diagnostic stream control Ready or incoming data valid dropped). | |
| StreamError[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Error during last Acquisition (Raw diagnostic stream control Ready or incoming data valid dropped). | |
| StreamError[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Error during last Acquisition (Raw diagnostic stream control Ready or incoming data valid dropped). | |
| StreamError[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Error during last Acquisition (Raw diagnostic stream control Ready or incoming data valid dropped). | |
| StreamOverflow[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Overflow. | |
| StreamOverflow[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Overflow. | |
| StreamOverflow[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Overflow. | |
| StreamOverflow[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Overflow. | |
| StreamPause[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Pause. | |
| StreamPause[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Pause. | |
| StreamPause[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Pause. | |
| StreamPause[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Pause. | |
| StreamReady[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Ready. | |
| StreamReady[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Ready. | |
| StreamReady[2] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Ready. | |
| StreamReady[3] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Raw diagnostic stream control Ready. | |
| Timestamp[0] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Timestamp 63:0 | |
| Timestamp[1] |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Timestamp 63:0 | |
| TrigCount |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Counts valid data acquisition triggers. | |
| TriggerCascMask | Mask for enabling/disabling cascaded trigger. | ||
| TriggerCascStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Cascade Trigger Status (Registered on first trigger until cleared by TriggerClearStatus). | |
| TriggerClearStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Trigger status will be cleared (On the rising edge). | |
| TriggerDaq | Trigger data aquisition from software. | ||
| TriggerHwArm |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Arm the Hardware trigger (On the rising edge). After trigger occurs the trigger has to be rearmed. | |
| TriggerHwArmed |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Hardware Trigger Armed Status (Registered on rising edge Control(3) and cleared when Hw trigger occurs). | |
| TriggerHwAutoRearm | Mask for enabling/disabling hardware trigger. If disabled it has to be rearmed by ArmHwTrigger. | ||
| TriggerHwStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Hardware Trigger Status (Registered on first trigger until cleared by TriggerClearStatus). | |
| TriggerStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Combined Trigger Status (Registered on first trigger until cleared by TriggerClearStatus). | |
| TriggerSw |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Software Trigger (triggers DAQ on all enabled channels). | |
| TriggerSwStatus |
Toggle Hex Display Format. (Input format always accepts '0x' prefix.) | Software Trigger Status (Registered on first trigger until cleared by TriggerClearStatus). |