; $Id: get_xpal.pro,v 1.1.1.1 1999/05/19 20:49:18 lynnc Exp $ ; Copyright (c) 1992-1993, Research Systems, Inc. All rights reserved. ; Unauthorized reproduction prohibited. ;+ ; NAME: ; GET_XPALETTE ; ; PURPOSE: ; This is just XPALETTE modified into a function to return the ; color index currently selected before the USER selects the ; DONE button. ; ; Interactively create color tables using the RGB, CMY, HSV, and ; HLS color systems using the mouse, three sliders, and a cell ; for each color index. Single colors can be defined or multiple ; color indices between two endpoints can be interpolated. ; ; CATEGORY: ; Color tables, widgets. ; ; CALLING SEQUENCE: ; color_index = GET_XPALETTE() ; ; INPUTS: ; No explicit inputs. The current color table is used as a starting ; point. ; ; KEYWORD PARAMETERS: ; None. ; ; OUTPUTS: ; None. ; ; COMMON BLOCKS: ; COLORS: Contains the current RGB color tables. ; XP_COM: Private to this module. ; ; SIDE EFFECTS: ; GET_XPALETTE uses two colors from the current color table as ; drawing foreground and background colors. These are used ; for the RGB plots on the left, and the current index marker on ; the right. This means that if the user set these two colors ; to the same value, the GET_XPALETTE display could become unreadable ; (like writing on black paper with black ink). GET_XPALETTE minimizes ; this possibility by noting changes to the color map and always ; using the brightest available color for the foreground color ; and the darkest for the background. Thus, the only way ; to make GET_XPALETTE's display unreadable is to set the entire color ; map to a single color, which is highly unlikely. The only side ; effect of this policy is that you may notice GET_XPALETTE redrawing ; the entire display after you've modified the current color. ; This simply means that the change has made GET_XPALETTE pick new ; drawing colors. ; ; The new color tables are saved in the COLORS common and loaded ; to the display. ; ; PROCEDURE: ; The GET_XPALETTE widget has the following controls: ; ; Left: Three plots showing the current Red, Green, and Blue vectors. ; ; Center: A status region containing: ; 1) The total number of colors. ; 2) The current color. GET_XPALETTE allows changing ; one color at a time. This color is known as ; the "current color" and is indicated in the ; color spectrum display with a special marker. ; 3) The current mark index. The mark is used to ; remember a color index. It is established by ; pressing the "Set Mark Button" while the current ; color index is the desired mark index. ; 4) The current color. The special marker used in ; color spectrum display prevents the user from seeing ; the color of the current index, but it is visible ; here. ; ; A panel of control buttons, which do the following when ; pressed: ; ; Done: Exits GET_XPALETTE, returns the current color index ; selected. ; ; Predefined: Starts XLOADCT to allow selection of one of the ; predefined color tables. Note that when you change ; the color map via XLOADCT, GET_XPALETTE is not always ; able to keep its display accurate. This problem can ; be overcome by pressing the GET_XPALETTE "Redraw" button ; after changing things via XLOADCT. ; ; Help: Supplies help information similar to this header. ; ; Redraw: Completely redraws the display using the current ; state of the color map. ; ; Set Mark: Set the value of the mark index to the ; current index. ; ; Switch Mark: Exchange the mark and the current index. ; ; Copy Current: Every color lying between the current ; index and the mark index (inclusive) is given ; the current color. ; ; Interpolate: The colors lying between the current ; index and the mark index are interpolated linearly ; to lie between the colors of two endpoints. ; ; Three sliders (R, G, and B) that allow the user to modify the ; current color. ; ; Right: A display which shows the current color map as a series of ; squares. Color index 0 is at the upper left. The color index ; increases monotonically by rows going left to right and top ; to bottom. The current color index is indicated by a special ; marker symbol. There are 4 ways to change the current color: ; 1) Press any mouse button while the mouse ; pointer is over the color map display. ; 2) Use the "By Index" slider to move to ; the desired color index. ; 3) Use the "Row" Slider to move the marker ; vertically. ; 4) Use the "Column" Slider to move the marker ; horizontally. ; ; MODIFICATION HISTORY: ; July 1990, AB. Based on the PALETTE procedure, which does ; similar things using only basic IDL graphics ; commands. ; ; 7 January 1991, Re-written for general use. ; 1 April 1992, Modified to use the CW_RGBSLIDER and CW_COLORSEL ; compound widgets. The use of color systems other than ; RGB is now supported. ; 15 June 1992, Modified to use the CW_FIELD and CW_BGROUP compound ; widgets. ; 7 April 1993, Removed state caching. Fixed a bug where switching ; the current index and the mark would fail to update the ; current index label. ; ; 31 January 1995, Fixed small bug with Number Of Colors line (H.C.Wen) ; 09 May 1995, H.C. Wen, check only first 3 characters of !VERSION.OS. ;- function XP_NEW_COLORS ; Choose the best foreground and background colors for the current ; color maps and set !P appropriately. Returns 1 if the colors changed, ; 0 otherwise. common xp_com, xpw, state res = 0 junk = CT_LUMINANCE(dark=dark_col, bright=bright_col) if (bright_col ne !p.color) then begin !p.color = bright_col res = 1 endif if (dark_col ne !p.background) then begin !p.background = dark_col res = 1 endif return, res end pro XP_REPLOT, color_index, type ; Re-draw the RGB plots. Type has the following possible values. ;; - 'D': Draw the data part of all three plots ; - 'F': draw all three plots ; - 'R': Draw the data part of the Red plot ; - 'G': Draw the data part of the Green plot ; - 'B': Draw the data part of the Blue plot common xp_com, xpw, state common colors, r_orig, g_orig, b_orig, r_curr, g_curr, b_curr common pscale, r_x_s, r_y_s, g_x_s, g_y_s, b_x_s, b_y_s ; Update the plots of RGB wset, state.plot_win save_p_region = !p.region save_x_margin = !x.margin save_y_margin = !y.margin save_x_s = !x.s save_y_s = !y.s !y.margin= [2, 2] !x.margin= [6, 2] if (type eq 'F') then begin !p.region = [0,.6667, 1, 1] plot,xstyle=2, ystyle=3, yrange=[0, 260], r_curr, title='Red' r_x_s = !x.s r_y_s = !y.s !p.region = [0,.333, 1, .6667] plot,/noerase, xstyle=2,ystyle=3, yrange=[0, 260], g_curr, title='Green' g_x_s = !x.s g_y_s = !y.s !p.region = [0,0, 1, .333] plot,/noerase, xstyle=2,ystyle=3, yrange=[0, 260], b_curr, title='Blue' b_x_s = !x.s b_y_s = !y.s endif else begin if ((type eq 'D') or (type eq 'R')) then begin !p.region = [0,.6667, 1, 1] !x.s = r_x_s !y.s = r_y_s oplot, r_curr, color=color_index endif if ((type eq 'D') or (type eq 'G')) then begin !p.region = [0,.333, 1, .6667] !x.s = g_x_s !y.s = g_y_s oplot, g_curr, color=color_index endif if ((type eq 'D') or (type eq 'B')) then begin !p.region = [0,0, 1, .333] !x.s = b_x_s !y.s = b_y_s oplot, b_curr, color=color_index endif endelse !p.region = save_p_region !x.margin = save_x_margin !y.margin = save_y_margin !x.s = save_x_s !y.s = save_y_s end pro XP_CHANGE_COLOR, type, value ; Change current color. Type has the following possible values. ; - 'R': Change the R part of the current color ; - 'G': ... ; - 'B': ... common xp_com, xpw, state common colors, r_orig, g_orig, b_orig, r_curr, g_curr, b_curr cur_idx = state.cur_idx XP_REPLOT, !p.background, type if (type eq 'R') then r_curr(cur_idx) = value; if (type eq 'G') then g_curr(cur_idx) = value; if (type eq 'B') then b_curr(cur_idx) = value; tvlct, r_curr(cur_idx), g_curr(cur_idx), b_curr(cur_idx), cur_idx if (XP_NEW_COLORS()) then begin ; Highlight the current position using the marker WIDGET_CONTROL, xpw.colorsel, set_value=-1 ; Re-initialize XP_REPLOT, !p.color, 'F' endif else begin XP_REPLOT, !p.color, type endelse end pro XP_BUTTON_EVENT, event common xp_com, xpw, state common colors, r_orig, g_orig, b_orig, r_curr, g_curr, b_curr ; NOTE: The value of these tags depend on the order of the buttons ; in the base. case (event.value) of ; DONE 0: begin if state.old_window ge 0 then wset, state.old_window empty ;WRITE_MASKS not valid for MS Windows OS = STRUPCASE(!VERSION.OS) OS = STRMID(OS,0,3) IF (OS NE 'WIN') AND (!VERSION.OS NE 'MACOS') THEN $ device,set_write=state.old_mask ;Restore old write mask r_orig = r_curr & g_orig = g_curr & b_orig = b_curr ;new orig color tbl WIDGET_CONTROL, /DESTROY, event.top !p = state.old_p end ; PREDEFINED 1: xloadct, /silent, group=xpw.base ; HELP 2: XDisplayFile, FILEPATH("xpalette.txt", subdir='help'), $ TITLE = "Get_XPalette Help", GROUP = event.top, WIDTH = 55, HEIGHT = 16 ; REDRAW 3: begin junk = XP_NEW_COLORS() WIDGET_CONTROL, xpw.colorsel, set_value=-1 XP_REPLOT, !p.color, 'F' ; Update the plots of RGB end ; SET MARK 4: begin state.mark_idx = state.cur_idx WIDGET_CONTROL, xpw.mark_label, $ set_value=strcompress(state.mark_idx, /REMOVE) endif ; SWITCH MARK 5 : if (state.mark_idx ne state.cur_idx) then begin tmp = state.mark_idx state.mark_idx = state.cur_idx state.cur_idx = tmp WIDGET_CONTROL, xpw.colorsel, set_value=tmp WIDGET_CONTROL, xpw.idx_label, $ set_value=strcompress(state.cur_idx, /REMOVE) WIDGET_CONTROL, xpw.mark_label, $ set_value=strcompress(state.mark_idx, /REMOVE) endif ; COPY CURRENT 6 : begin do_copy: cur_idx = state.cur_idx if (state.mark_idx le cur_idx) then begin s = state.mark_idx e = cur_idx endif else begin s = cur_idx e = state.mark_idx endelse n = e-s+1 XP_REPLOT, !p.background, 'D' if (event.value eq 6) then begin r_curr(s:e) = r_curr(cur_idx) g_curr(s:e) = g_curr(cur_idx) b_curr(s:e) = b_curr(cur_idx) endif else begin ; Interpolate scale = findgen(n)/float(n-1) r_curr(s:e) = r_curr(s) + (fix(r_curr(e)) - fix(r_curr(s))) * scale g_curr(s:e) = g_curr(s) + (fix(g_curr(e)) - fix(g_curr(s))) * scale b_curr(s:e) = b_curr(s) + (fix(b_curr(e)) - fix(b_curr(s))) * scale endelse tvlct, r_curr(s:e), g_curr(s:e), b_curr(s:e), s if (XP_NEW_COLORS()) then begin WIDGET_CONTROL, xpw.colorsel, SET_VALUE=-1 XP_REPLOT, !p.color, 'F' endif else begin XP_REPLOT, !p.color, 'D' endelse end 7: goto, do_copy else: endcase end pro XP_EVENT, event common xp_com, xpw, state common colors, r_orig, g_orig, b_orig, r_curr, g_curr, b_curr case (event.id) of xpw.button_base: XP_BUTTON_EVENT, event xpw.rgb_base: begin cur_idx = state.cur_idx if (event.r ne r_curr(cur_idx)) then XP_CHANGE_COLOR, "R", event.r if (event.g ne g_curr(cur_idx)) then XP_CHANGE_COLOR, "G", event.g if (event.b ne b_curr(cur_idx)) then XP_CHANGE_COLOR, "B", event.b end xpw.colorsel: begin cur_idx = state.cur_idx new_pos = event.value ne cur_idx ; Update the RBG sliders if (event.value ne cur_idx) then begin state.cur_idx = (cur_idx = event.value) WIDGET_CONTROL, xpw.idx_label, $ set_value=strcompress(cur_idx, /REMOVE_ALL) ; Mark new square wset, state.cur_color_win erase, color=cur_idx WIDGET_CONTROL, xpw.rgb_base, $ set_value=[r_curr(cur_idx), g_curr(cur_idx), b_curr(cur_idx)] endif end else: endcase end function GET_XPALETTE, group=group common xp_com, xpw, state common colors, r_orig, g_orig, b_orig, r_curr, g_curr, b_curr xpw = { xp_widgets, base:0L, $ colorsel:0L, mark_label:0L, idx_label:0L, button_base:0L, rgb_base:0L} state = {xp_state, old_window:0L, $ ; Original window index old_mask:0L, $ ; Original mask old_p:!p, $ ; Original value of !P mark_idx:0, $ ; Current mark index cur_idx:0, $ ; Current index cur_color_win:0, $ ; Current Color draw window index plot_win:0 } ; RGB plot draw window index if (XREGISTERED('GET_XPALETTE')) then return,-1 ; Only one copy at a time on_error,2 ;Return to caller if an error occurs ;WRITE_MASKS not valid for MS Windows OS = STRUPCASE(!VERSION.OS) OS = STRMID(OS,0,3) IF (OS NE 'WIN') AND (OS NE 'MACOS') THEN $ device,get_write=tmp,set_write=255 ELSE $ ;Enable all bits tmp = 0 state.old_mask=tmp nc = !d.table_size ;# of colors avail if nc eq 0 then message, "Device has static color tables. Can't modify." if (nc eq 2) then message, 'Unable to work with monochrome system.' state.old_p = !p ;Save !p !p.noclip = 1 ;No clipping !p.color = nc -1 ;Foreground color !p.font = 0 ;Hdw font state.old_window = !d.window ;Previous window IF N_ELEMENTS(r_orig) LE 0 THEN BEGIN ;If no common, use current colors TVLCT, r_orig, g_orig, b_orig, /GET r_curr = r_orig b_curr = b_orig g_curr = g_orig ENDIF ; Create widgets xpw.base=WIDGET_BASE(title='Get_XPalette', /ROW, space=30) version = WIDGET_INFO(/VERSION) if (version.style='Motif') then junk=510 else junk = 580 plot_frame = WIDGET_DRAW(xpw.base, xsize=200, ysize=junk) c1 = WIDGET_BASE(xpw.base, /COLUMN, space=20) status = WIDGET_BASE(c1, /COLUMN, /FRAME) ncw = WIDGET_LABEL(WIDGET_BASE(status),$ VALUE='Number Of Colors: ' +$ strcompress(!d.n_colors, /REMOVE_ALL)) xpw.idx_label = CW_FIELD(status, title='Current Index: ', value='0', $ xsize=20, /STRING) xpw.mark_label = CW_FIELD(status, title='Mark Index: ', value='0', $ xsize=20, /STRING) c1_1 = widget_base(status, /ROW) junk = WIDGET_LABEL(c1_1, value="Current Color: ") cur_color = WIDGET_DRAW(c1_1, xsize = 125, ysize=50, /frame) names = [ 'Done', 'Predefined', 'Help', 'Redraw', 'Set Mark', $ 'Switch Mark', 'Copy Current', 'Interpolate' ] xpw.button_base = CW_BGROUP(c1, names, COLUMN=3, /FRAME) xpw.rgb_base = CW_RGBSLIDER(c1, /FRAME, /DRAG) junk = WIDGET_BASE(xpw.base) ; Responds to YOFFSET if (version.style='Motif') then junk2=30 else junk2 = 50 xpw.colorsel = CW_COLORSEL(junk, yoffset=junk2) state.cur_idx = 0 state.mark_idx = 0 ; Position RGB slider appropriately WIDGET_CONTROL, xpw.rgb_base, SET_VALUE=[r_curr(0), g_curr(0), b_curr(0)] WIDGET_CONTROL, /REALIZE, xpw.base ; WIDGET_CONTROL, ncw, $ ; set_value='Number Of Colors: ' + strcompress(!d.n_colors, /REMOVE_ALL) WIDGET_CONTROL, get_value=tmp, cur_color state.cur_color_win = tmp WIDGET_CONTROL, get_value=tmp, plot_frame state.plot_win = tmp ; Update the plots of RGB junk = XP_NEW_COLORS() XP_REPLOT, !p.color, 'F' XMANAGER, 'Get_XPalette', xpw.base, event_handler='XP_EVENT', $ group=group, /MODAL return, state.cur_idx end