Meeting
Agenda
24 Feb 2004
In
attendance: J. Nelson (notetaker), R.
Chestnut, J. Frisch, R. Hall, E. Miller, J. Rock, S. Smith
Slow
archiver?
Index rebuild is imminent. Bob will continue to work with Ian
MacGregor.
SLED FDBK
through SCP slow feedback
Ugly Button Macro is now working. Ed thinks he can pull this off in a slow fbck
in the next few days. Besides the delta
and the updated fresh value, we want both steppers to get act->des every 10
cycles. Slow fbck to process every
minute or so.
SIS
waveforms archived every hour (plus on change)
We do want this and around early April.
List of
phase 2a signals
In addition
to Judy’s lovely list of 21 RF channels, we need to add 5 more ADC channels for
integrated power (energy) signals with minimal accoutrement.
Steve/Joe
will have a hardware list ready early this week.
Right now,
the only ADC channels being used are 0 & 1 (twt5:inp:fwd and
twt6:inp:fwd). If these need to be
lobotomized, please let Janice know and she/Joe can move wires around.
Prep for
phase 2a
Please activate in the database DTZ #3 in
TR09 (need module status and 7 WFs). The
WFs also need archiving (like DTZ0-2) Thank you, Judy.
macnair
module support of aes
Not yet. Ron is working on this. Database coming soonish.
Will need to
be able to archive and set the gain.
Will need to
have AES on structures in tunnel April 1stish
PLC checkout
(eventually)
Newplc
Rumored to be coming in a few weeks… Nice email from
Alan Hill. Janice has instructions for
what to try when installed and ready to go.
Realm split
This
is ongoing. Ops should expect just a few
small interruptions in the future.
TR06 is coming…
Up there on the roof. Has a processor, ip address and a name. Not booted with db, etc.
ELOG
No
new news. Next, Bob, Keith, and Spence
will discuss wants and work needed.
2-pack PLC coming in April-ish.
~20 signals as yet undefined.
New Vacuum coming with phase II-a
Judy made leaping, bounding progress and is now
waiting for Cassel to assign PLC channels (in March probably).
SIS missing pulses
This is obviously hardware. Joe and Janice are working on it. Maybe fixed???