FLASSI. ECHO stream rerouted to file: LCLS2cu.echo FLASSI. PRINT stream rerouted to file: LCLS2cu.print FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: common.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: SPRD.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: CUSXR.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: ALINE.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: BYP.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: LTU.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: UND.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: SFT.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: HXTES.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: LCLS2cu.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: LCLS_L1.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: LCLS_L2.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: LCLS_L3.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: BSYcu.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: standard input ENBEAM. ## Warning ## Redundant data on BEAM --- SIGE will be ignored. 275 ! ------------------------------------------------------------------------------ !CALL, FILENAME="LCLS2cu_match.mad8" !CALL, FILENAME="RDB/LCLS2cu_makeSymbols.mad8" 280 !CALL, FILENAME="elegant/LCLS2cu_makeElegant.mad8" !use LCLS_L*e.xsif !STOP ! ============================================================================== 285 ! Beam from LCLS gun (SURVEY in linac coordinates) ! ------------------------------------------------------------------------------ ! HXR 290 !COMMENT ASSIGN, PRINT="LCLS2cuH.print" FLASSI. Closing PRINT file: LCLS2cu.print FLASSI. PRINT stream rerouted to file: LCLS2cuH.print BEAM, ENERGY=E00 SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF SETK2cuH 295 USE, CU_HXR ENUSE. New beam line expanded: CU_HXR !SAVELINE, NAME="CU_HXR", FILENAME="LCLS2cuH.saveline" PRINT, FULL SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuH_survey.tape" SURVEY. Output written on file: LCLS2cuH_survey.tape TWISS, SAVE, BETA0=TWSSC, TAPE="LCLS2cuH_twiss.tape" !, & TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2cuH_twiss.tape TWBTSV. Lattice functions saved in table: TWISS 300 ! RTAPE="LCLS2cuH_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACE, FILE="LCLS2cuH", & TITLE="Cu-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 305 STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACE, FILE="LCLS2cuH", & TITLE="Cu-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACE, FILE="LCLS2cuH", & TITLE="Cu-linac to HXR dump" 310 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=MM2/DU7H[36], FILE="LCLS2cuH", & TITLE="VBEND through HXR" !ENDCOMMENT 315 ! ------------------------------------------------------------------------------ ! SXR !COMMENT 320 ASSIGN, PRINT="LCLS2cuS.print" FLASSI. Closing PRINT file: LCLS2cuH.print FLASSI. PRINT stream rerouted to file: LCLS2cuS.print BEAM, ENERGY=E00 SET, SETCUS, CUSON !pulsed !SET, SETCUS, CUSONDC !DC !VALUE, PULSED,DCMODE 325 SETK2cuS USE, CU_SXR ENUSE. New beam line expanded: CU_SXR !SAVELINE, NAME="CU_SXR", FILENAME="LCLS2cuS.saveline" PRINT, FULL SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuS_survey.tape" SURVEY. Output written on file: LCLS2cuS_survey.tape 330 TWISS, SAVE, BETA0=TWSSC, TAPE="LCLS2cuS_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2cuS_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2cuS_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cuS", & TITLE="Cu-linac to SXR dump" 335 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cuS", & TITLE="Cu-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cuS", & 340 TITLE="Cu-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=VBOUTB/DU7S[32], FILE="LCLS2cuS", & TITLE="VBEND through SXR" !ENDCOMMENT 345 ! ------------------------------------------------------------------------------ ! A-line 350 !COMMENT ASSIGN, PRINT="LCLS2cuA.print" FLASSI. Closing PRINT file: LCLS2cuS.print FLASSI. PRINT stream rerouted to file: LCLS2cuA.print BEAM, ENERGY=E00 SET, SETCUS, CUSOFF ; SET, SETAL, ALON SETK2cuA 355 USE, CU_ALINE ENUSE. New beam line expanded: CU_ALINE !SAVELINE, NAME="CU_ALINE", FILENAME="LCLS2cuA.saveline" PRINT, FULL SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuA_survey.tape" SURVEY. Output written on file: LCLS2cuA_survey.tape TWISS, SAVE, BETA0=TWSSC, TAPE="LCLS2cuA_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2cuA_twiss.tape TWBTSV. Lattice functions saved in table: TWISS 360 ! RTAPE="LCLS2cuA_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/ENDBSYA_2, FILE="LCLS2cuA", & TITLE="Cu-linac to A-line" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=rBETX,rBETY, & 365 STYLE=100, SPLINE, RANGE=BEGDL1_1/ENDBSYA_2, FILE="LCLS2cuA", & TITLE="Cu-linac to A-line" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/ENDBSYA_2, FILE="LCLS2cuA", & TITLE="Cu-linac to A-line" 370 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! 6 MeV gun spectrometer 375 COMMENT ASSIGN, PRINT="LCLS2cuGSPEC.print" BEAM, ENERGY=E00 USE, CU_GSPEC 380 !SAVELINE, NAME="CU_GSPEC", FILENAME="LCLS2cuGSPEC.saveline" PRINT, FULL SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuGSPEC_survey.tape" TWISS, SAVE, BETA0=TWSSC, TAPE="LCLS2cuGSPEC_twiss.tape" !, & ! RTAPE="LCLS2cuGSPEC_rmat.tape" 385 PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & STYLE=100, SPLINE, RANGE=BEGGUN/ENDGSPEC, FILE="LCLS2cuGSPEC", & TITLE="Cathode to 6-MeV Gun Spectrometer" ENDCOMMENT 390 ! ------------------------------------------------------------------------------ ! 135 MeV spectrometer COMMENT 395 ASSIGN, PRINT="LCLS2cuSPEC.print" BEAM, ENERGY=E00 USE, CU_SPEC !SAVELINE, NAME="CU_SPEC", FILENAME="LCLS2cuSPEC.saveline" PRINT, FULL 400 SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuSPEC_survey.tape" TWISS, SAVE, BETA0=TWSSC, TAPE="LCLS2cuSPEC_twiss.tape" !, & ! RTAPE="LCLS2cuSPEC_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & STYLE=100, SPLINE, RANGE=BEGGUN/ENDSPEC, FILE="LCLS2cuSPEC", & 405 TITLE="Cathode to 135-MeV Spectrometer" ENDCOMMENT ! ============================================================================== ! SURVEY in BSY coordinates (from end of L3) 410 ! ------------------------------------------------------------------------------ ! HXR !COMMENT 415 ASSIGN, PRINT="BSY-LCLS2cuH.print" FLASSI. Closing PRINT file: LCLS2cuA.print FLASSI. PRINT stream rerouted to file: BSY-LCLS2cuH.print BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF SETK2cuH USE, BSYLTUH ENUSE. New beam line expanded: BSYLTUH 420 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuH_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuH_survey.tape !ENDCOMMENT 425 ! ------------------------------------------------------------------------------ ! HXR safety dump (nominal energy: 8 GeV; energy range: 2-20 GeV) !COMMENT 430 ASSIGN, PRINT="BSY-LCLS2cuHS.print" FLASSI. Closing PRINT file: BSY-LCLS2cuH.print FLASSI. PRINT stream rerouted to file: BSY-LCLS2cuHS.print BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF SETK2cuH USE, BSYLTUHS ENUSE. New beam line expanded: BSYLTUHS 435 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuHS_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuHS_survey.tape !ENDCOMMENT 440 ! ------------------------------------------------------------------------------ ! HXR XTES !COMMENT 445 ASSIGN, PRINT="BSY-LCLS2cuHXTES.print" FLASSI. Closing PRINT file: BSY-LCLS2cuHS.print FLASSI. PRINT stream rerouted to file: BSY-LCLS2cuHXTES.print BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF USE, BSYLTUHXTES ENUSE. New beam line expanded: BSYLTUHXTES PRINT, FULL 450 SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuHXTES_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuHXTES_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 455 ! HXR TXI !COMMENT ASSIGN, PRINT="BSY-LCLS2cuHTXI.print" FLASSI. Closing PRINT file: BSY-LCLS2cuHXTES.print 460 BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF USE, BSYLTUHTXI ENUSE. New beam line expanded: BSYLTUHTXI PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & 465 TAPE="BSY-LCLS2cuHTXI_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuHTXI_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 470 ! SXR !COMMENT ASSIGN, PRINT="BSY-LCLS2cuS.print" FLASSI. Closing PRINT file: BSY-LCLS2cuHTXI.print BEAM, ENERGY=Ef 475 SET, SETCUS, CUSON !pulsed !SET, SETCUS, CUSONDC !DC !VALUE, PULSED,DCMODE SETK2cuS USE, BSYLTUS ENUSE. New beam line expanded: BSYLTUS 480 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuS_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuS_survey.tape !ENDCOMMENT 485 ! ------------------------------------------------------------------------------ ! A-line !COMMENT 490 ASSIGN, PRINT="BSY-LCLS2cuA.print" FLASSI. Closing PRINT file: BSY-LCLS2cuS.print BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALON SETK2cuA USE, BSYALINE ENUSE. New beam line expanded: BSYALINE 495 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuA_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuA_survey.tape !ENDCOMMENT 500 ! ------------------------------------------------------------------------------ ! S100 to A-line ("A-line BSY" coordinates from Transport deck) ! Note: the "A-line BSY" coordinates differ from the LCLS BSY coordinates 505 COMMENT ASSIGN, PRINT="BSYA-LCLS1cuA.print" BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALON SETK2cuA 510 USE, S100ALINE PRINT, FULL SURVEY, Y0=77.643643677513, PHI0=-0.00475999999158308164 ENDCOMMENT 515 ! ============================================================================== ! Color Twiss plots ! ------------------------------------------------------------------------------ !COMMENT 520 ASSIGN, PRINT="LCLS2cu.print" FLASSI. Closing PRINT file: BSY-LCLS2cuA.print ! Cathode to HXR Main Dump BEAM, ENERGY=E00 525 SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF SETK2cuH USE, CU_HXR ENUSE. Beam line re-expanded: CU_HXR PRINT, FULL TWISS, SAVE, BETA0=TWSSC TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS 530 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, RANGE=BEGGUN/ENDL0, FILE="LCLS2cu_color", & TITLE="Cu_linac: Gun + L0 linac" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & COLOUR=100, SPLINE, RANGE=LHbeg/LHend, FILE="LCLS2cu_color", & 535 TITLE="Cu_linac: Laser Heater chicane" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & COLOUR=100, SPLINE, RANGE=L0bBEG/ENDDL1_2, FILE="LCLS2cu_color", & TITLE="Cu_linac: L0b + DL1 dogleg" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 540 COLOUR=100, SPLINE, RANGE=BEGL1/ENDL1, FILE="LCLS2cu_color", & TITLE="Cu_linac: L1 linac" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & COLOUR=100, SPLINE, RANGE=BEGBC1/ENDBC1, FILE="LCLS2cu_color", & TITLE="Cu_linac: BC1 chicane" 545 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGL2/ENDL2, FILE="LCLS2cu_color", & TITLE="Cu_linac: L2 linac" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & COLOUR=100, SPLINE, RANGE=BEGBC2/ENDBC2, FILE="LCLS2cu_color", & 550 TITLE="Cu_linac: BC2 chicane" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGL3/ENDL3, FILE="LCLS2cu_color", & TITLE="Cu_linac: L3 linac" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 555 COLOUR=100, SPLINE, RANGE=BEGCLTH_0/ENDBSYH_2, FILE="LCLS2cu_color", & TITLE="Cu_linac: BSY to LTUH" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGLTUH/ENDLTUH, FILE="LCLS2cu_color", & TITLE="LTUH" 560 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGUNDH/ENDUNDH, FILE="LCLS2cu_color", & TITLE="HXR Undulator" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDMPH_1/DUMPFACE, FILE="LCLS2cu_color", & 565 TITLE="HXR Post-undulator to dump" ! Cathode to HXR Safety Dump BEAM, ENERGY=E00 570 USE, CU_SFTH ENUSE. New beam line expanded: CU_SFTH TWISS, SAVE, BETA0=TWSSC TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGSFTH_1/SFTDUMP, FILE="LCLS2cu_color", & TITLE="HXR safety dump" 575 ! Cathode to SXR Main Dump BEAM, ENERGY=E00 SET, SETCUS, CUSON !pulsed 580 !SET, SETCUS, CUSONDC !DC !VALUE, PULSED,DCMODE SETK2cuS USE, CU_SXR ENUSE. Beam line re-expanded: CU_SXR !SAVELINE, NAME="CU_SXR", FILENAME="LCLS2cuS.saveline" 585 PRINT, FULL TWISS, SAVE, BETA0=TWSSC TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, & COLOUR=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cu_color", & TITLE="Cu_linac: DL1 to SXR dump" 590 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cu_color", & TITLE="Cu_linac: DL1 to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cu_color", & 595 TITLE="Cu_linac: DL1 to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGCLTH_0/ENDBSYS, FILE="LCLS2cu_color", & TITLE="Cu_linac: BSY to LTUS" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & 600 COLOUR=100, SPLINE, RANGE=BEGLTUS/ENDLTUS, FILE="LCLS2cu_color", & TITLE="LTUS" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGUNDS/ENDUNDS, FILE="LCLS2cu_color", & TITLE="SXR Undulator" 605 PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDMPS_1/DUMPFACEb, FILE="LCLS2cu_color", & TITLE="SXR Post-indulator to dump" ! Cathode to A-line 610 BEAM, ENERGY=E00 SET, SETCUS, CUSOFF ; SET, SETAL, ALON SETK2cuA USE, CU_ALINE ENUSE. Beam line re-expanded: CU_ALINE 615 TWISS, SAVE, BETA0=TWSSC TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=rBETX,rBETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGCLTH_0/ENDBSYA_2, FILE="LCLS2cu_color", & TITLE="Cu_linac: BSY to A-line" !ENDCOMMENT 620 ! ============================================================================== !CALL, FILENAME="LCLS2cu_area_plots.mad8" 625 ! ------------------------------------------------------------------------------ STOP ZEND. 21 Warning messages, 0 Error messages. MAD terminated on 09/02/22 at 12.08.29 MZEND. Usage statistics for 1 dynamic stores. Map of store 0 / / ------------------------ Division Number of times Kind Max-size Garb-coll. Mode Position used allowed Wiped user auto Pushd Redcd 1 QDIV1 0 1 9 92525 56000006 32 0 0 62 0 2 QDIV2 1 1 55999606 3911958 56000006 0 0 0 0 0 20 system 1 8 56000006 111 56000006 0 0 0 0 0