! *** OPTICS=LCLS2sc29JUN16 *** ! LCLS2sc post laser heater diagnostic beamline ! ============================================================================== ! Modification History ! ------------------------------------------------------------------------------ ! 06-JUN-2016, M. Woodley ! * assign TYPE="0.984K35.4" to BKRDG0 ! * set BKRDG0 kicker gap to 25 mm ! * center BPMDG000 between BKRDG0 and BLRDG0 ! ------------------------------------------------------------------------------ ! 01-OCT-2015, M. Woodley ! * remove YCDG000 (between kicker and septum) ! * move BPMDG000 to upstream face of septum ! * change TYPE of QDG001-03 to "QI" type (1.51Q7.00) ! * change TYPE of XCDG001-02 and YCORDG001-02 to "class-6" and locate per ! H. Alvarez ! * move SCDG003 between QDG004 and QDG005 ! * change TYPE of OTRs and YAGs per Henrik's PRD ! * move entire line into the aisle (X: Xgun+0.5 -> Xgun-0.5) ! * use SETDG0 to turn kicker & septum ON/OFF ! ------------------------------------------------------------------------------ ! 19-JUN-2015, M. Woodley ! * take yaw out of Lambertson septum ! * replace 30 deg "0.98VD18.7" dipole with rolled 35 deg "BXS" dipole ! * remove QDG012, XCDG012, and YCDG012 ! * undefer BPMDG012 ! * shorten the line by 1.556 m ! ------------------------------------------------------------------------------ ! 20-MAR-2015, M. Woodley ! * roll kicker into bend plane of septum ! * fix interferences per H. Alvarez ! * replace QDG002 (1.259Q3.5) with 1.0Q3.1 ! * change BPMDG002 and BPMDG003 to "Stripline-9" ! * define additional magnet TYPEs ! ------------------------------------------------------------------------------ ! 12-DEC-2014, M. Woodley ! * interference resolution per H. Alvarez: ! - move BPMDG00 38.1 cm (15 inches) upstream ! - replace QDG001 and QDG003 (1.259Q3.5) with 1.0Q3.1 ! - move SCDG002 (XCDG002/YCDG002) 4.0 cm (1.5 inches) upstream ! - move SCDG003 (XCDG003/YCDG003) 30.5 cm (12 inches) upstream ! - move QDG004/BPMDG004 5.1 cm (2 inches) downstream ! - move RFBDG003 20.4 cm (8 inches) downstream ! - move RFBDG004 14.0 cm (5.5 inches) upstream ! * replace RFBDG004 (defer=2) with BPMDG004 (defer=0) ! ------------------------------------------------------------------------------ ! 28-OCT-2014, M. Woodley ! * move BYDG0/SCDG012 21 inches d/s to avoid interference with COL0 devices; ! add an additional 20 cm between SCDG012 and OTRDG04 to match spectrometer ! optics ! ------------------------------------------------------------------------------ ! 13-OCT-2014, M. Woodley ! * parameters of extraction magnets (BKYDG0, BLRDG0, and BXDG0) per "Post-LH ! Diagnostic Beamline Requirements" PRD (LCLSII-2.4-PR-0068-R1) ! * adjust deferment/deprecation levels ! ------------------------------------------------------------------------------ ! 07-AUG-2014, M. Woodley ! * diagnostics complement per "Electron Beam Diagnostics Systems" PRD ! (LCLSII-2.7-PR-0170) ! * decorate device TYPE attributes to indicate non-baseline status ! 17-APR-2014, M. Woodley ! * add "CNT" MARKERs after dispersive areas (ELEGANT CENTERing) ! ------------------------------------------------------------------------------ ! 31-MAR-2014, M. Woodley ! * reduce horizontal beamline offset from 70 cm to 50 cm per H. Alvarez ! * add WSDG01 ! * element names changed to conform to nomenclature PRD ! 27-FEB-2014, M. Woodley ! * created (based on a previous deck from Paul Emma) ! ------------------------------------------------------------------------------ ! geometry and horizontal dispersion matching parameters ! YANG0 : vertical kick angle (rad) ! XANG0 : septum bend angle (rad) ! SROL0 : kicker/septum roll angle (suppress vertical dispersion) ! AROLL0K : removes tiny coordinate roll from rolled kicker ! AROLL0L : removes tiny coordinate roll from rolled HLAM ! YK01 : simulates vertical kick due to misaligned QDG001 ! YK02 : simulates vertical kick due to misaligned QDG003 ! ZHH0 : z-distance from BLRDG0 center to BXDG0 center (m) ! ZTWK0a : z-distance adjust (moves QDG001 and QDG003 w.r.t. QDG002) ! ZTWK0b : z-distance adjust (moves QDG001/QDG002/QDG003 together) ! KQBF0 : strength of QDG001/QDG003 ! KQBD0 : strength of QDG002 YANG0 := -0.833318062396E-2 ! -0.83334163902E-2 XANG0 := 0.104888536538 ! 0.104907047642 SROL0 := 0.176699440628 ! -0.178475547902 AROLL0K := -0.60084338373E-5 ! 0.606659261643E-5 AROLL0L := 0.105498270761E-3 ! -0.115355538592E-3 YK01 := -0.964722799243E-2 ! -0.977848685269E-2 YK02 := -0.597746163395E-3 ! -0.655172413757E-3 ZHH0 := 4.73074234504 ! 4.754790293502 ZTWK0a := -0.325585867843 ! -0.284357486501 ZTWK0b := -0.014570470464 ! -0.014622274147 KQBF0 := 9.807425871432 ! 19.917546719613 KQBD0 := -7.825140556484 !-13.410702917581 ! ============================================================================== ! LCAV ! ------------------------------------------------------------------------------ ! transverse deflecting cavities ! (NOTE: TCYDG0 might be installed as an uprgade at a later time) TCYDG0h : LCAV, TYPE="@4,TRANS_YDEF", FREQ=2856, L=0.8/2 !Y-deflector (split) TCXDG0h : LCAV, TYPE="@1,TRANS_XDEF", FREQ=2856, L=0.8/2 !X-deflector (split) ! ============================================================================== ! SBEN ! ------------------------------------------------------------------------------ YKOFF0 := 15E-3 !vertical offset at septum face (m) ZKS0 := 2.0 !z-distance from BKRDG0 center to BLRDG0 center (m) DX0 := -0.5 !x-distance from linac axis to diagnostic line axis (m) XANG02 := 6.0*RADDEG !BXDG0 bend angle (rad) ! kicker GK0 := 0.025 ZK0 := 1.0 AK0 := YANG0 AK0_2 := AK0*AK0 AK0_4 := AK0_2*AK0_2 AK0_6 := AK0_4*AK0_2 SINCAK0 := 1-AK0_2/6+AK0_4/120-AK0_6/5040 !~sinc(AK0)=sin(AK0)/AK0 LK0 := ZK0/SINCAK0 AK0S := ASIN(SIN(AK0)/2) AK0S_2 := AK0S*AK0S AK0S_4 := AK0S_2*AK0S_2 AK0S_6 := AK0S_4*AK0S_2 SINCAK0S := 1-AK0S_2/6+AK0S_4/120-AK0S_6/5040 !~sinc(AK0S)=sin(AK0S)/AK0S LK0S := ZK0/(2*SINCAK0S) AK0L := AK0-AK0S LK0L := LK0-LK0S BKRDG0a : SBEN, TYPE="0.984K35.4", HGAP=GK0/2, L=LK0S, ANGLE=AK0S, & E1=0, FINT=0.5, FINTX=0, TILT=90*RADDEG+SROL0 BKRDG0b : SBEN, TYPE="0.984K35.4", HGAP=GK0/2, L=LK0L, ANGLE=AK0L, & E2=AK0, FINT=0, FINTX=0.5, TILT=90*RADDEG+SROL0 ! septum GS0 := 0.02 ZS0 := 0.4 AS0 := XANG0 AS0_2 := AS0*AS0 AS0_4 := AS0_2*AS0_2 AS0_6 := AS0_4*AS0_2 SINCAS0 := 1-AS0_2/6+AS0_4/120-AS0_6/5040 !~sinc(AS0)=sin(AS0)/AS0 LS0 := (ZS0/COS(AK0))/SINCAS0 AS0S := ASIN(SIN(AS0)/2) AS0S_2 := AS0S*AS0S AS0S_4 := AS0S_2*AS0S_2 AS0S_6 := AS0S_4*AS0S_2 SINCAS0S := 1-AS0S_2/6+AS0S_4/120-AS0S_6/5040 !~sinc(AS0S)=sin(AS0S)/AS0S LS0S := (ZS0/COS(AK0))/(2*SINCAS0S) AS0L := AS0-AS0S LS0L := LS0-LS0S BLRDG0a : SBEN, TYPE="0.79SD14.96", HGAP=GS0/2, L=LS0S, & ANGLE=AS0S, E1=0, FINT=0.5, FINTX=0, TILT=SROL0 BLRDG0b : SBEN, TYPE="0.79SD14.96", HGAP=GS0/2, L=LS0L, & ANGLE=AS0L, E2=AS0, FINT=0, FINTX=0.5, TILT=SROL0 ! horizontal bend GH0 := 0.02 ZH0 := 0.4 AH0h := XANG02/2 !half-angle AH0h_2 := AH0h*AH0h AH0h_4 := AH0h_2*AH0h_2 AH0h_6 := AH0h_4*AH0h_2 SINCAH0h := 1-AH0h_2/6+AH0h_4/120-AH0h_6/5040 !~sinc(AH0h)=sin(AH0h)/AH0h LH0 := ZH0/SINCAH0h BXDG0a : SBEN, TYPE="0.79D14.96", HGAP=GH0/2, L=LH0/2, & ANGLE=-AH0h, E1=-AH0h, FINT=0.5, FINTX=0 BXDG0b : SBEN, TYPE="0.79D14.96", HGAP=GH0/2, L=LH0/2, & ANGLE=-AH0h, E2=-AH0h, FINT=0, FINTX=0.5 ! spectrometer (dump) bend LBDMP0 := 0.5435 !measured GBDMP0 := 0.034 ABDMP0 := -35*RADDEG EBDMP0 := -7.29*RADDEG !measured FBDMP0 := 0.391 !measured BYDG0a : SBEN, TYPE="BXS", HGAP=GBDMP0/2, L=LBDMP0/2, & ANGLE=ABDMP0/2, E1=EBDMP0, FINT=FBDMP0, FINTX=0, & TILT=90*RADDEG BYDG0b : SBEN, TYPE="BXS", HGAP=GBDMP0/2, L=LBDMP0/2, & ANGLE=ABDMP0/2, E2=EBDMP0, FINT=0, FINTX=FBDMP0, & TILT=90*RADDEG ! ============================================================================== ! QUAD ! ------------------------------------------------------------------------------ KQDG004 := 8.650600635931 KQDG005 := -12.059991325293 KQDG006 := 6.896982509524 KQDG007 := -4.414285193645 KQDG008 := 11.24316494588 KQDG009 := -11.689230689312 KQDG010 := 13.020677452311 KQDG011 := -10.983650982259 QDG001 : QUAD, TYPE="1.51Q7.00", L=LQs/2, APER=rQs, K1=KQBF0 QDG002 : QUAD, TYPE="1.51Q7.00", L=LQs/2, APER=rQs, K1=KQBD0 QDG003 : QUAD, TYPE="1.51Q7.00", L=LQs/2, APER=rQs, K1=KQBF0 QDG004 : QUAD, TYPE="1.259Q3.5", L=LQx/2, APER=rQx, K1=KQDG004 QDG005 : QUAD, TYPE="1.259Q3.5", L=LQx/2, APER=rQx, K1=KQDG005 QDG006 : QUAD, TYPE="1.259Q3.5", L=LQx/2, APER=rQx, K1=KQDG006 QDG007 : QUAD, TYPE="1.259Q3.5", L=LQx/2, APER=rQx, K1=KQDG007 QDG008 : QUAD, TYPE="1.259Q3.5", L=LQx/2, APER=rQx, K1=KQDG008 QDG009 : QUAD, TYPE="1.259Q3.5", L=LQx/2, APER=rQx, K1=KQDG009 QDG010 : QUAD, TYPE="1.259Q3.5", L=LQx/2, APER=rQx, K1=KQDG010 QDG011 : QUAD, TYPE="1.259Q3.5", L=LQx/2, APER=rQx, K1=KQDG011 ! ============================================================================== ! MULT ! ------------------------------------------------------------------------------ ! model misaligned quadrupoles DYQDG001 : MULTIPOLE, K0L=YK01, T0=90*RADDEG DYQDG003 : MULTIPOLE, K0L=YK02, T0=90*RADDEG VALUE, 1.E3*YK01/(KQBF0*LQs),1.E3*YK02/(KQBF0*LQs) !vertical offsets (mm) ! ============================================================================== ! SROT ! ------------------------------------------------------------------------------ ! removes creeping roll introduced by rolled Lambertson RODG0K : SROT, ANGLE=AROLL0K RODG0L : SROT, ANGLE=AROLL0L ! ============================================================================== ! DRIF ! ------------------------------------------------------------------------------ ! dogleg ! ZKSD0 : dz between kicker exit and BLRDG0 entrance (m) ! ZHH1D0 : dz between BLRDG0 and 1st QDG001 ! ZHH2D0 : dz between QDG001 and QDG002 ! ZHH3D0 : dz between QDG002 and QDG003 ! ZHH4D0 : dz between QDG003 and BXDG0 ZQs := LQs*COS(XANG02) ZKSD0 := ZKS0-ZK0/2-ZS0/2 ZHH1D0 := ZHH0/4-ZQs/2-ZS0/2 ZHH2D0 := ZHH0/4-ZQs ZHH3D0 := ZHH0/4-ZQs ZHH4D0 := ZHH0/4-ZQs/2-ZH0/2 DKV0 : DRIF, L=ZKSD0/COS(AK0) DQB01 : DRIF, L=(ZHH1D0-ZTWK0a+ZTWK0b)/COS(XANG02) DQB02 : DRIF, L=(ZHH2D0+ZTWK0a )/COS(XANG02) DQB03 : DRIF, L=(ZHH3D0+ZTWK0a )/COS(XANG02) DQB04 : DRIF, L=(ZHH4D0-ZTWK0a-ZTWK0b)/COS(XANG02) COMMENT VALUE, ZHH0,ZHH1D0,ZHH2D0,ZHH3D0,ZHH4D0 VALUE, ZS0/2+DQB01[L]*COS(XANG02)+ZQs/2+ZTWK0a-ZTWK0b VALUE, ZQs/2+DQB02[L]*COS(XANG02)+ZQs/2-ZTWK0a VALUE, ZQs/2+DQB03[L]*COS(XANG02)+ZQs/2-ZTWK0a VALUE, ZQs/2+DQB04[L]*COS(XANG02)+ZH0/2+ZTWK0a+ZTWK0b ENDCOMMENT DKV0a : DRIF, L=DKV0[L]/2 DKV0b : DRIF, L=DKV0[L]-DKV0a[L] DQB01a : DRIF, L=0.15 DQB01c : DRIF, L=0.25 DQB01b : DRIF, L=DQB01[L]-DQB01a[L]-DQB01c[L] DQB02b : DRIF, L=0.25 DQB02a : DRIF, L=DQB02[L]-DQB02b[L] DQB03b : DRIF, L=0.25 DQB03a : DRIF, L=DQB03[L]-DQB03b[L] DQB04b : DRIF, L=0.4532 DQB04a : DRIF, L=DQB04[L]-DQB04b[L] ! diagnostic line DDG003 : DRIF, L=0.374418820858 !0.375213145904 DDG004 : DRIF, L=0.541 DDG005 : DRIF, L=0.592 DDG006 : DRIF, L=2.492 DDG007 : DRIF, L=0.592 DDG008 : DRIF, L=0.592 DDG009 : DRIF, L=2.962 DDG010 : DRIF, L=0.592 DDG011 : DRIF, L=1.4048 DDG012 : DRIF, L=0.935296300379 DDG004a : DRIF, L=DDG004[L]/2 DDG004b : DRIF, L=DDG004[L]-DDG004a[L] DDG005a : DRIF, L=DDG005[L]/2 DDG005b : DRIF, L=DDG005[L]-DDG005a[L] DDG006a : DRIF, L=0.296 DDG006b : DRIF, L=0.15 DDG006c : DRIF, L=0.15 DDG006d : DRIF, L=DDG006[L]-DDG006a[L]-2*TCYDG0h[L]-DDG006b[L]-DDG006c[L] & -2*TCXDG0h[L] DDG008a : DRIF, L=0.296 DDG008b : DRIF, L=DDG008[L]-DDG008a[L] DDG009a : DRIF, L=0.296 DDG009b : DRIF, L=0.7 DDG009c : DRIF, L=0.3 DDG009d : DRIF, L=0.3 DDG009e : DRIF, L=0.7 DDG009f : DRIF, L=DDG009[L]-DDG009a[L]-DDG009b[L]-DDG009c[L]-DDG009d[L] & -DDG009e[L] DDG010a : DRIF, L=0.296 DDG010b : DRIF, L=DDG010[L]-DDG010a[L] DDG011a : DRIF, L=0.3 DDG011b : DRIF, L=DDG011[L]-DDG011a[L] DDG012a : DRIF, L=0.395296300379 DDG012b : DRIF, L=0.24 DDG012c : DRIF, L=DDG012[L]-(DDG012a[L]+DDG012b[L]) BMINDG0 := (DDG009b[L]+DDG009c[L])/SQRT(3) !waist (120 deg between OTRs) ! ============================================================================== ! BPMs ! ------------------------------------------------------------------------------ BPMDG000 : MONI, TYPE="Stripline-4" BPMDG001 : MONI, TYPE="@0,Stripline-9" BPMDG002 : MONI, TYPE="Stripline-9" BPMDG003 : MONI, TYPE="Stripline-9" BPMDG004 : MONI, TYPE="Stripline-1" BPMDG005 : MONI, TYPE="Stripline-1" BPMDG0RF : MONI, TYPE="Stripline-1" BPMDG008 : MONI, TYPE="Stripline-1" BPMDG009 : MONI, TYPE="Stripline-1" BPMDG011 : MONI, TYPE="Stripline-1" RFBDG001 : MONI, TYPE="@2,CavityL-1" RFBDG002 : MONI, TYPE="@2,CavityS-1" RFBDG003 : MONI, TYPE="@2,CavityS-1" BPMDG012 : MONI, TYPE="Stripline-11" !RFBDG004 : MONI, TYPE="@2,CavityL-1" ! ============================================================================== ! XCORs ! ------------------------------------------------------------------------------ XCDG001 : HKIC, TYPE="class-6" XCDG002 : HKIC, TYPE="class-6" XCDG003 : HKIC, TYPE="class-1a" XCDG005 : HKIC, TYPE="class-1a" XCDG008 : HKIC, TYPE="class-1a" XCDG010 : HKIC, TYPE="class-1a" ! ============================================================================== ! YCORs ! ------------------------------------------------------------------------------ YCDG001 : VKIC, TYPE="class-6" YCDG002 : VKIC, TYPE="class-6" YCDG003 : VKIC, TYPE="class-1a" YCDG005 : VKIC, TYPE="class-1a" YCDG008 : VKIC, TYPE="class-1a" YCDG010 : VKIC, TYPE="class-1a" ! ============================================================================== ! diagnostics, etc. ! ------------------------------------------------------------------------------ ! profile monitors OTRDG01 : PROF, TYPE="@3,YAG/OTR PSI" OTRDG02 : PROF, TYPE="OTR INJ" OTRDG03 : PROF, TYPE="@3,YAG/OTR PSI" OTRDG04 : PROF, TYPE="OTR INJ" ! wire scanners WSDG01 : WIRE ! charge monitors FCDG0DU : IMON, TYPE="Faraday cup" ! ============================================================================== ! marker points ! ------------------------------------------------------------------------------ M1DG0 : MARK CNTDG0 : MARK, TYPE="CENTER" M2DG0 : MARK MTCYDG0 : MARK MTCXDG0 : MARK ! ============================================================================== ! BEAMLINE ! ------------------------------------------------------------------------------ COMMENT DIAG0 : LINE=(& BEGDIAG0,& BKRDG0a,BKRDG0b,RODG0K,DKV0,M1DG0,& BLRDG0a,BLRDG0b,RODG0L,DQB01,& QDG001,DYQDG001,QDG001,DQB02,& QDG002,QDG002,DQB03,& QDG003,DYQDG003,QDG003,DQB04,& BXDG0a,BXDG0b,CNTDG0,M2DG0,DDG003,& QDG004,QDG004,DDG004,& QDG005,QDG005,DDG005,& QDG006,QDG006,DDG006,& QDG007,QDG007,DDG007,& QDG008,QDG008,DDG008,& QDG009,QDG009,DDG009,& QDG010,QDG010,DDG010,& QDG011,QDG011,DDG011,& BYDG0a,BYDG0b,DDG012,& ENDDIAG0) ENDCOMMENT SCDG003 : LINE=(XCDG003,YCDG003) SCDG005 : LINE=(XCDG005,YCDG005) SCDG008 : LINE=(XCDG008,YCDG008) SCDG010 : LINE=(XCDG010,YCDG010) TCYDG0 : LINE=(TCYDG0h,MTCYDG0,TCYDG0h) TCXDG0 : LINE=(TCXDG0h,MTCXDG0,TCXDG0h) !COMMENT DIAG0 : LINE=(& BEGDIAG0,& BKRDG0a,BKRDG0b,RODG0K,DKV0a,BPMDG000,DKV0b,M1DG0,& BLRDG0a,BLRDG0b,RODG0L,DQB01a,RFBDG001,DQB01b,XCDG001,DQB01c,& QDG001,BPMDG001,DYQDG001,QDG001,DQB02a,YCDG001,DQB02b,& QDG002,BPMDG002,QDG002,DQB03a,XCDG002,DQB03b,& QDG003,BPMDG003,DYQDG003,QDG003,DQB04a,YCDG002,DQB04b,& BXDG0a,BXDG0b,CNTDG0,M2DG0,DDG003,& QDG004,BPMDG004,QDG004,DDG004a,SCDG003,DDG004b,& QDG005,BPMDG005,QDG005,DDG005a,SCDG005,DDG005b,& QDG006,QDG006,DDG006a,TCYDG0,DDG006b,BPMDG0RF,DDG006c,TCXDG0,DDG006d,& QDG007,QDG007,DDG007,& QDG008,BPMDG008,QDG008,DDG008a,SCDG008,DDG008b,& QDG009,BPMDG009,QDG009,DDG009a,OTRDG01,DDG009b,RFBDG002,DDG009c, & OTRDG02,DDG009d,WSDG01,DDG009e,OTRDG03,DDG009f,& QDG010,QDG010,DDG010a,SCDG010,DDG010b,& QDG011,BPMDG011,QDG011,DDG011a,RFBDG003,DDG011b,& BYDG0a,BYDG0b,DDG012a,BPMDG012,DDG012b,OTRDG04,DDG012c,FCDG0DU,& ENDDIAG0) !ENDCOMMENT ! ------------------------------------------------------------------------------ RETURN