! *** OPTICS=LCLS2sc27NOV18 *** ! LCLS2cu various parts upstream of BSY ! ============================================================================== ! Modification History ! ------------------------------------------------------------------------------ ! 20-DEC-2018, M. Woodley ! * define BC1 and BC2 bend angles, rather than B ! ------------------------------------------------------------------------------ ! 08-MAY-2017, M. Woodley ! * add 0.000001 m to DM19 to force Z=2059.732900 m at ZLIN04 and to line up ! sector boundaries; reduce DAQ17 by the same amount to compensate ! 01-MAR-2017, M. Woodley ! * WS24 is actually installed (per LCLS) ! ------------------------------------------------------------------------------ ! 23-NOV-2016, Y. Nosochkov ! * update KQ30801 value ! ------------------------------------------------------------------------------ ! 04-NOV-2016, M. Woodley ! * change "1.259Q3.5" to "1.26Q3.5" ! * change Everson-Tesla 2.362Q3.5 (r=30mm) to SigmaPhi 1.69Q3.4 (bore=43mm) ! * remove definition of DRIFT "DAQ6A" ! ------------------------------------------------------------------------------ ! 28-OCT-2014, M. Woodley ! * redefine drift DAQ17 to end at LI30 IV30-9 (Z=3042.005) ! ============================================================================== LSOL1 := 0.200 !needed for DL01a definition ! ============================================================================== ! Longitudinal misalignments observed after installation and difficult to fix: ! Added to MAD file (but not drawings) so that optics comes out right (1/11/07). ! ------------------------------------------------------------------------------ dz_QA11 := 3.42E-3 !quad is too far downstream when dz>0 dz_Q21201 :=-2.39E-3 !quad is too far downstream when dz>0 dz_Q21301 := 5.73E-3 !quad is too far downstream when dz>0 dz_QM14 := 2.17E-3 !quad is too far downstream when dz>0 dz_QM15 := 2.48E-3 !quad is too far downstream when dz>0 ! ============================================================================== ! LCAVs ! ------------------------------------------------------------------------------ ! global LCAV parameters DLWLX := 0.5948 !X-band structure length from input-coupler center to output-coupler center, each with tooling balls (m) DLWL10 := 3.0441 !"10 ft" (29 Sband wavelengths; 87 DLWG cavities) DLWL9 := 2.8692 !"9.41 ft" (27 1/3 Sband wavelengths; 82 DLWG cavities) DLWL7 := 2.1694 !"7 ft" (20 2/3 Sband wavelengths; 62 DLWG cavities) P25 := 1 !25% power factor P50 := SQRT(2) !50% power factor ! L0 energy profile (model the one 3-m L0b section only) L0phase := -1.1 !L0b S-band rf phase (deg) dEL0a := GeV2MeV*(E0i-E00) !total L0a energy gain (MeV) dEL0b := GeV2MeV*(Ei-E0i) !total L0b energy gain (MeV) PhiL0 := L0phase/360 !radians/2pi !gfac0 := 3.130139 !flange-to-flange length of dual-feed L0-a and L0-b RF structures [m] gfac0 := 3.095244 !flange-to-flange length (121.86" Oct. 18, '05) of dual-feed L0-a and L0-b RF structures [m] gradL0a := dEL0a/(gfac0*COS(PhiL0*TWOPI)) gradL0b := dEL0b/(gfac0*COS(PhiL0*TWOPI)) ! L1 energy profile L1phase := -25.1 !L1 S-band rf phase (deg) L1Xphase :=-160.0 !L1 X-band rf phase (deg) dEL1 := GeV2MeV*(EBC1-Ei) !total L1 energy gain (MeV) dEL1X := 19.0 !L1 X-band amplitude (MeV) PhiL1 := L1phase/360 !radians/2pi PhiL1X := L1Xphase/360 !radians/2pi gfac1 := P50*DLWL9+P25*DLWL9+P25*DLWL10 gradL1 := (dEL1-dEL1X*COS(PhiL1X*TWOPI))/(gfac1*COS(PhiL1*TWOPI)) !VALUE, gradL1 ! L2 energy profile L2phase := -41.4 !L2 rf phase (deg) dEL2 := GeV2MeV*(EBC2-EBC1) !total L2 energy gain (MeV) PhiL2 := L2phase/360 !radians/2pi gfac2 := 110*P25*DLWL10+1*P50*DLWL10 gradL2 := dEL2/(gfac2*COS(PhiL2*TWOPI)) !VALUE, gradL2 ! L3 energy profile L3phase := 0.0 !L3 rf phase (deg) dEL3 := GeV2MeV*(Ef-EBC2) !total L3 energy gain (MeV) PhiL3 := L3phase/360 !radians/2pi gfac3 := 161*P25*DLWL10 + 12*P50*DLWL10 + 3*P25*DLWL9 + 4*P25*DLWL7 gradL3 := dEL3/(gfac3*COS(PhiL3*TWOPI)) !VALUE, gradL3 L1X___1 : LCAV, TYPE="X1_Xband", FREQ=XbandF, L=DLWLX/2, & DELTAE=dEL1X/2 , PHI0=PhiL1X L1X___2 : LCAV, TYPE="X1_Xband", FREQ=XbandF, L=DLWLX/2, & DELTAE=dEL1X/2 , PHI0=PhiL1X ! L0 sections L0a___1 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=0.0586460, & DELTAE=gradL0a*0.0586460, PHI0=PhiL0 L0a___2 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=0.1993540, & DELTAE=gradL0a*0.1993540, PHI0=PhiL0 L0a___3 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=0.6493198, & DELTAE=gradL0a*0.6493198, PHI0=PhiL0 L0a___4 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=0.6403022, & DELTAE=gradL0a*0.6403022, PHI0=PhiL0 L0a___5 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=1.1518464, & DELTAE=gradL0a*1.1518464, PHI0=PhiL0 L0a___6 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=0.3348566, & DELTAE=gradL0a*0.3348566, PHI0=PhiL0 L0a___7 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=0.0609190, & DELTAE=gradL0a*0.0609190, PHI0=PhiL0 L0b___1 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=0.0586460, & DELTAE=gradL0b*0.0586460, PHI0=PhiL0 L0b___2 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=0.3371281, & DELTAE=gradL0b*0.3371281, PHI0=PhiL0 L0b___3 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=1.1518479, & DELTAE=gradL0b*1.1518479, PHI0=PhiL0 L0b___4 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=1.1515630, & DELTAE=gradL0b*1.1515630, PHI0=PhiL0 L0b___5 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=0.3351400, & DELTAE=gradL0b*0.3351400, PHI0=PhiL0 L0b___6 : LCAV, TYPE="DUALFEED", FREQ=SbandF, L=0.0609190, & DELTAE=gradL0b*0.0609190, PHI0=PhiL0 FLNGa1 : MARK !upstream face of L0a entrance flange FLNGa2 : MARK !downstream face of L0a exit flange FLNGb1 : MARK !upstream face of L0b entrance flange FLNGb2 : MARK !downstream face of L0b exit flange ! transverse deflecting cavities !TCAV0 : DRIF, L=0.6680236/2 !flange-to-flange (then split in two) !TCAV3 : DRIF, L=2.438/2 TCAV0 : LCAV, TYPE="TRANS_DEFL", L=0.6680236/2 !flange-to-flange (then split in two) TCAV3 : LCAV, TYPE="TRANS_DEFL", L=2.438/2 !LKIK := 1.0601 ! kicker coil length per magnet (m) [41.737 in from SA-380-330-02, rev. 0] BXKIKA : SBEN, TYPE="XPULSED", L=LKIK/2, ANGLE=1E-12, HGAP=25.4E-3, & E1=0 , FINT=0.5, FINTX=0 BXKIKB : SBEN, TYPE="XPULSED", L=LKIK/2, ANGLE=1E-12, HGAP=25.4E-3, & FINT=0, E2=2E-12, FINTX=0.5 ! ============================================================================== ! BENDs ! ------------------------------------------------------------------------------ ! global BEND parameters dLBh := 0.0144 !increase to lengthen BXH1-4 eff. length (m) LBh := 0.110+dLBh !5D3.9 "Z" length (m) laser-heater chicane bends approx. effective length (R. Carr, 01-AUG-05 -PE) GBh := 30E-3 !5D3.9 gap height (m) LB0 := 0.2032 !5D7.1 "Z" length (m) GB0 := 30E-3 !5D7.1 gap height (m) LB1 := 0.2032 !5D7.1 "Z" length (m) GB1 := 43.28E-3 !5D7.1 gap height (m) LB2 := 0.5490 !1D19.7 "Z" length (m) !changed from 0.540 m to 0.549 on Sep. 28, '07 based on magnetic measurements - PE GB2 := 33.35E-3 !1D19.7 gap height (m) !LB3 := 2.623 !4D102.36T effective length (m) !GB3 := 0.023 !4D102.36T gap height (m) !LVB := 1.025 !3D39 vertical bend effective length (m) !GVB := 0.034925 !vertical bend gap width (m) ! GTL ! === RBXG := 0.1963 !BXG bend radius (measured) [m] ABXG := 85.0*RADDEG !bend angle of BXG dipole [deg*RADDEG = rad] EBXG := 24.25*RADDEG !BXG pole-face rot. edge angle of BXG dipole [deg*RADDEG = rad] GBXG := 0.043 !BXG magnet full gap height (m) LBXG := RBXG*ABXG !path length of BXG dipole when ON (= R*theta) [m] !VALUE, LBXG BXGA : SBEN, L=LBXG/2, ANGLE=ABXG/2, & HGAP=GBXG/2, E1=EBXG, E2=0 , & FINT=0.492, FINTX=0 ! 1st-half of gun spectrometer bend (set to ~zero length and strength, with longitudinal position as the actual bend's center) BXGB : SBEN, L=LBXG/2, ANGLE=ABXG/2, & HGAP=GBXG/2, E1=0 , E2=EBXG, & FINT=0.0 , FINTX=0.492 ! 1st-half of gun spectrometer bend (set to ~zero length and strength, with longitudinal position as the actual bend's center) DXG0 : DRIF, L=RBXG*SIN(ABXG/2) ! drift, w/BXG off, from BXG entrance face to its z-projected center DXGA : SBEN, L=1E-9/2, ANGLE=0/2 ! 1st-half of gun-spec bend (set to ~zero length and strength, with longitudinal position as bend's center) DXGB : SBEN, L=1E-9/2, ANGLE=0/2 ! 2nd-half of gun-spec bend (set to ~zero length and strength, with longitudinal position as bend's center) DGS1 : DRIF, L=0.1900-LQGx/2-20E-6-0.0155757 DGS2 : DRIF, L=(0.2300-LQGx)/2+20E-6 DGS3 : DRIF, L=(0.2300-LQGx)/2-20E-6 DGS4 : DRIF, L= 0.1680-LQGx/2-0.00283 DGS5 : DRIF, L= 0.0300-0.02271 DGS6 : DRIF, L= 0.0240-0.00402 DGS7 : DRIF, L= 0.05 rQGx := 0.020 ! QG quadrupole pole-tip radius [m] LQGx := 0.076 ! QG quadrupole effective length [m] CQ01 : QUAD,L=1E-9/2,K1=0,TYPE="QSOL" !correction quad in 1st solenoid at gun (nominally set to 0) (set to ~zero length, with longitudinal position as the actual quad's center) SQ01 : QUAD,L=1E-9/2,K1=0,TILT,TYPE="QSOL" !correction skew-quad in 1st solenoid at gun (nominally set to 0) (set to ~zero length, with longitudinal position as the actual quad's center) QG02 : QUAD,L=LQGx/2,K1=-35.48540,APER=rQGx,TYPE="QG" QG03 : QUAD,L=LQGx/2,K1= 80.16051,APER=rQGx,TYPE="QG" XCG1 : HKIC,TYPE="class-G" XCG2 : HKIC,TYPE="class-G" YCG1 : VKIC,TYPE="class-G" YCG2 : VKIC,TYPE="class-G" SCG1 : LINE=(XCG1,YCG1) SCG2 : LINE=(XCG2,YCG2) BPMG1 : MONI, TYPE="25_um_res" CRG1 : INST ! Cerenkov radiator bunch length monitor YAGG1 : PROF, TYPE="YAG" ! 6-MeV spectrometer screen FCG1 : INST ! gun-spec. Faraday cup w/screen GSPECBEG: MARK GSPEC : LINE=(GSPECBEG,BXGA,BXGB,DGS1,QG02,SCG1,QG02, & DGS2,BPMG1,DGS3,QG03,SCG2,QG03,& DGS4,YAGG1,DGS5,CRG1,DGS6,FCG1,DGS7,DBMARK97) ! gun spectrometer from BXG to Farraday cup and dump ! 135-MeV Spectrometer ! ==================== KQS01 := 9.682244191676 KQS02 := -5.648980372134 QS01 : QUAD, TYPE="ETA", L=LQx/2, K1=KQS01, APER=rQx QS02 : QUAD, TYPE="ETA", L=LQx/2, K1=KQS02, APER=rQx DX01A : SBEN, L=LB0/2, ANGLE=1E-9 ! 1st half of BX01 magnet switched off here DX01B : SBEN, L=LB0/2, ANGLE=1E-9 ! 2nd half of BX01 magnet switched off here DS0 : DRIF, L=0.5583996 DS0a : DRIF, L=0.1691504 DS0b : DRIF, L=0.4615/2 DS1a : DRIF, L=0.0890085 DS1b : DRIF, L=0.1451215 DS1c : DRIF, L=0.171796 DS1d : DRIF, L=0.251824 DS2 : DRIF, L=0.478250 DS3a : DRIF, L=0.199626 DS3b : DRIF, L=0.200374 DS4 : DRIF, L=0.287275 DS6a : DRIF, L=0.2575952 DS6b : DRIF, L=0.2273298-0.008205 DS7 : DRIF, L=0.3801874+0.008205-0.02 DS8 : DRIF, L=0.1976126+0.02 DS9 : DRIF, L=0.3378194 SPECBEG : MARK BPMS1 : MONI, TYPE="20_um_res" BPMS2 : MONI, TYPE="20_um_res" BPMS3 : MONI, TYPE="20_um_res" VVS1 : MARK !135-MeV spectrometer vacuum valve YAGS1 : PROF, TYPE="YAG" !1st 135-MeV spectrometer YAG-screen - center of device in MAD is defined as center of YAG crystal, not mirror YAGS2 : PROF, TYPE="YAG" !2nd 135-MeV spectrometer YAG-screen - center of device in MAD is defined as center of YAG crystal, not mirror OTRS1 : PROF, TYPE="OTR" !135-MeV spectrometer OTR-screen SDMP : INST ! gun-spec. dump (exact location? - 11/09/05) XCS1 : HKIC,TYPE="class-1a" YCS1 : VKIC,TYPE="class-1a" XCS2 : HKIC,TYPE="class-1a" YCS2 : VKIC,TYPE="class-1a" SCS1 : LINE=(XCS1,YCS1) SCS2 : LINE=(XCS2,YCS2) LBS := 0.5435 !measured effective length along curved trajectory (m) GBS := 34E-3 !gap height (m) ABS := injdeg*RADDEG !injection line angle (rad) BXSEj := -7.29*RADDEG BXSA : SBEN, L=LBS/2 , HGAP=GBS/2, ANGLE=ABS/2, & E1=BXSEj, E2=0 , FINT=0.391 , FINTX=0 BXSB : SBEN, L=LBS/2 , HGAP=GBS/2, ANGLE=ABS/2, & E1=0 , E2=BXSEj , FINT=0 , FINTX=0.391 SPECBL : LINE=(SPECBEG,DX01A,DX01B,DS0,SCS1,DS0a,DS0b,DS1a,& VVS1,DS1b,YAGS1,DS1c,BPMS1,DS1d,BXSA,BXSB,DS2,& QS01,BPMS2,QS01,DS3a,SCS2,DS3b,QS02,QS02,DS4,& IMS1,DS6a,BPMS3,DS6b,YAGS2,DS7,OTRS1,DS8,& DS9,SDMP,DBMARK98) ! DL1 ! === DL1_ON := 1 !=1: nominal LCLS with BX01/02 bend magnet DL1 power-supply is ON, =0: 135-MeV spectrometer-mode with DL1 OFF ADL1 := injdeg*RADDEG !injection line angle (rad) AB0 := ADL1/2 !full bend angle (rad) LeffB0 := LB0*AB0/(2*SIN(AB0/2)) !full bend path length (m) AEB0 := AB0/2 !edge angles BX01A : SBEN, TYPE="5D7.1", L=LeffB0/2, HGAP=GB0/2, ANGLE=AB0/2, & E1=AEB0, FINT=0.45, FINTX=0 BX01B : SBEN, TYPE="5D7.1", L=LeffB0/2, HGAP=GB0/2, ANGLE=AB0/2, & E2=AEB0, FINT=0, FINTX=0.45 BX02A : SBEN, TYPE="5D7.1", L=LeffB0/2, HGAP=GB0/2, ANGLE=AB0/2, & E1=AEB0, FINT=0.45, FINTX=0 BX02B : SBEN, TYPE="5D7.1", L=LeffB0/2, HGAP=GB0/2, ANGLE=AB0/2, & E2=AEB0, FINT=0, FINTX=0.45 ! BC1 ! === Brho1 := Cb*EBC1 !beam rigidity at BC1 (kG-m) AB11 := -0.086753564890323 !full chicane bend angle (rad) RB11 := LB1/SIN(AB11) !bend radius (m) BB11 := Brho1/RB11 !bend field (kG) [-3.555805785115 kG @ 0.250 GeV] AB11S := ASIN((LB1/2)/RB11) !"short" half chicane bend angle (rad) LB11S := RB11*AB11S !"short" half chicane bend path length (m) AB11L := AB11-AB11S !"long" half chicane bend angle (rad) LB11L := RB11*AB11L !"long" half chicane bend path length (m) FB11 := 0.387 !fringe field integral ! BX11 gets an offset of 2.2 mm (theta*L/8) towards the wall ! BX12 gets an offset of 2.2 mm (theta*L/8) towards the aisle ! BX13 gets an offset of 2.2 mm (theta*L/8) towards the aisle ! BX14 gets an offset of 2.2 mm (theta*L/8) towards the wall BX11A : SBEN, TYPE="5D7.1", L=LB11S, ANGLE=+AB11S, HGAP=GB1/2, & E1=0, FINT=FB11, FINTX=0 BX11B : SBEN, TYPE="5D7.1", L=LB11L, ANGLE=+AB11L, HGAP=GB1/2, & FINT=0, E2=+AB11, FINTX=FB11 BX12A : SBEN, TYPE="5D7.1", L=LB11L, ANGLE=-AB11L, HGAP=GB1/2, & E1=-AB11, FINT=FB11, FINTX=0 BX12B : SBEN, TYPE="5D7.1", L=LB11S, ANGLE=-AB11S, HGAP=GB1/2, & FINT=0, E2=0, FINTX=FB11 BX13A : SBEN, TYPE="5D7.1", L=LB11S, ANGLE=-AB11S, HGAP=GB1/2, & E1=0, FINT=FB11, FINTX=0 BX13B : SBEN, TYPE="5D7.1", L=LB11L, ANGLE=-AB11L, HGAP=GB1/2, & FINT=0, E2=-AB11, FINTX=FB11 BX14A : SBEN, TYPE="5D7.1", L=LB11L, ANGLE=+AB11L, HGAP=GB1/2, & E1=+AB11, FINT=FB11, FINTX=0 BX14B : SBEN, TYPE="5D7.1", L=LB11S, ANGLE=+AB11S, HGAP=GB1/2, & FINT=0, E2=0, FINTX=FB11 ! magnet-to-magnet path lengths LD11 := 2.434900 !outer bend-to-bend "Z" distance (m) LD11o := LD11/COS(AB11) !outer bend-to-bend path length (m) (minus ~0.15 m 9/21/04) LD11a := 0.261301 !"Z" distance upstream of SQ13 (m) LD11b := LD11-LD11a-0.16*COS(AB11) !"Z" distance downstream of SQ13 (m) LD11oa := LD11a/COS(AB11) !path length upstream of SQ13 LD11ob := LD11b/COS(AB11) !path length downstream of SQ13 ! BC2 ! === Brho2 := Cb*EBC2 !beam rigidity at BC2 (kG-m) AB21 := -0.034727452562382 !full chicane bend angle (rad) RB21 := LB2/SIN(AB21) !bend radius (m) BB21 := Brho2/RB21 !bend field (kG) [-9.071122639275 kG @ 4.300 GeV] AB21S := ASIN((LB2/2)/RB21) !"short" half chicane bend angle (rad) LB21S := RB21*AB21S !"short" half chicane bend path length (m) AB21L := AB21-AB21S !"long" half chicane bend angle (rad) LB21L := RB21*AB21L !"long" half chicane bend path length (m) FB21 := 0.633 !fringe field integral ! BX21 gets an offset of ~2.3 mm (theta*L/8) towards the wall ! BX22 gets an offset of ~2.3 mm (theta*L/8) towards the aisle ! BX23 gets an offset of ~2.3 mm (theta*L/8) towards the aisle ! BX24 gets an offset of ~2.3 mm (theta*L/8) towards the wall BX21A : SBEN, TYPE="1D19.7", L=LB21S, ANGLE=+AB21S, HGAP=GB2/2, & E1=0, FINT=FB21, FINTX=0 BX21B : SBEN, TYPE="1D19.7", L=LB21L, ANGLE=+AB21L, HGAP=GB2/2, & FINT=0, E2=+AB21, FINTX=FB21 BX22A : SBEN, TYPE="1D19.7", L=LB21L, ANGLE=-AB21L, HGAP=GB2/2, & E1=-AB21, FINT=FB21, FINTX=0 BX22B : SBEN, TYPE="1D19.7", L=LB21S, ANGLE=-AB21S, HGAP=GB2/2, & FINT=0, E2=0, FINTX=FB21 BX23A : SBEN, TYPE="1D19.7", L=LB21S, ANGLE=-AB21S, HGAP=GB2/2, & E1=0, FINT=FB21, FINTX=0 BX23B : SBEN, TYPE="1D19.7", L=LB21L, ANGLE=-AB21L, HGAP=GB2/2, & FINT=0, E2=-AB21, FINTX=FB21 BX24A : SBEN, TYPE="1D19.7", L=LB21L, ANGLE=+AB21L, HGAP=GB2/2, & E1=+AB21, FINT=FB21, FINTX=0 BX24B : SBEN, TYPE="1D19.7", L=LB21S, ANGLE=+AB21S, HGAP=GB2/2, & FINT=0, E2=0, FINTX=FB21 ! magnet-to-magnet path lengths LD21i := 1.0 - 2*0.1 !inner bend-to-bend "Z" distance (m) LD1 := 2.00-0.04-0.0045 !outer bend-to-bend "Z" distance (m) LD2 := 8.00-0.04-0.0508-0.0045 !outer bend-to-bend "Z" distance (m) LD3 := 8.00-0.04-0.0508-0.0045 !outer bend-to-bend "Z" distance (m) LD4 := 2.00-0.04-0.0045 !outer bend-to-bend "Z" distance (m) LDo1 := LD1/COS(AB21) !outer bend-to-bend path length (m) LDo2 := LD2/COS(AB21)-LQc !outer bend-to-bend path length (m) LDo3 := LD3/COS(AB21)-LQc !outer bend-to-bend path length (m) LDo4 := LD4/COS(AB21) !outer bend-to-bend path length (m) ! 52-line stuff ! ============= B50B1A : SBEN,L=1.1320272,ANGLE=-0.86939816E-02,TYPE="50B1" B50B1B : SBEN,L=1.1320272,ANGLE=-0.86939816E-02,TYPE="50B1" B52AGFA : SBEN,L=0.40010029,ANGLE=-0.14360109E-02,& K1=0.43265282,TYPE="52AGF" B52AGFB : SBEN,L=0.40010029,ANGLE=-0.14360109E-02,& K1=0.43265282,TYPE="52AGF" B52WIG1A: SBEN,L=0.23367797/2,ANGLE=-0.23818663E-02/2,& TILT,TYPE="52WG1" B52WIG1B: SBEN,L=0.23367797/2,ANGLE=-0.23818663E-02/2,& TILT,TYPE="52WG1" B52WIG2A: SBEN,L=0.23368102,ANGLE=0.23818974E-02,& TILT,TYPE="52WG1" B52WIG2B: SBEN,L=0.23368102,ANGLE=0.23818974E-02,& TILT,TYPE="52WG1" B52WIG3A: SBEN,L=0.23367797/2,ANGLE=-0.23818663E-02/2,& TILT,TYPE="52WG1" B52WIG3B: SBEN,L=0.23367797/2,ANGLE=-0.23818663E-02/2,& TILT,TYPE="52WG1" Q52Q2 : QUAD,L=0.37224614,K1=-0.38544745,TYPE="52Q2" XC69 : HKIC,TYPE="52A1X" YC54T : VKIC,TYPE="52WIGT" YC59 : VKIC,TYPE="52A1Y" BPM52 : MONI,TYPE="20_um_res" BPM56 : MONI,TYPE="20_um_res" BPM64 : MONI,TYPE="20_um_res" BPM68 : MONI,TYPE="20_um_res" IM61 : MARK,TYPE="52I1" PR45 : INST,TYPE="50PR2" PR55 : INST,TYPE="52PR0" PR60 : INST,TYPE="52PR1" WS62 : INST,TYPE="52WS1" DRI14001: DRIF,L=0.7620000 DRI14002: DRIF,L=2.9725315 DRI14003: DRIF,L=0.91440000E-01 DRI14004: DRIF,L=0.2092970 DRI14005: DRIF,L=0.1737360 DRI14006: DRIF,L=0.1139068 DRI14007: DRIF,L=0.2255520 DRI14008: DRIF,L=0.1280160 DRI14009: DRIF,L=0.1219200 DRI14010: DRIF,L=0.1916339 T460061T: DRIF,L=0,TYPE="52I1" DRI14011: DRIF,L=0.1981200 DRI14012: DRIF,L=0.3230880 DRI14013: DRIF,L=0.4252539 SL1X : DRIF,L=0,TYPE="52SL1X" DRI14014: DRIF,L=0.7909590 SL1Y : DRIF,L=0,TYPE="52SL1Y" DRI14015: DRIF,L=1.0088270 DRI14016: DRIF,L=0.3139440 DRI14017: DRIF,L=2.2764689 SL2 : DRIF,L=0,TYPE="52SL2" ! DL1 ! KQA01 := -7.474220813631 ! OLD - no lsr-htr (for commissioning in Dec. '06 through July '07) & on-measured TWSS0 ! KQA02 := 8.137641193725 ! KQE01 := -2.215639104385 ! KQE02 := -0.241173314721 ! KQE03 := 7.613440306134 ! KQE04 := -6.985386854286 ! KQA01 := -12.492179751016 ! OLD - with 5.4-cm lamu lsr-htr and "MATRIX" focusing, but non-measured TWSS0 ! KQA02 := 11.022504569397 ! KQE01 := -3.089332618348 ! KQE02 := 0.090132722014 ! KQE03 := 6.822078966488 ! KQE04 := -5.731166555613 ! KQA01 := -6.1200 ! post Aug. 11, 2008 matching based on real measurements with heater/chicane not yet installed (64 & 135 MeV) ! KQA02 := 12.6808 ! KQE01 := -1.4046 ! KQE02 := -2.4546 ! KQE03 := 9.6624 ! KQE04 := -7.4610 KQA01 := -12.317411498864 ! new design with laser-heater ON (chicane and und, w/Betx=Bety=12 m), based on measured (back-tracked) TWSS0 KQA02 := 13.706906173749 KQE01 := -6.538179321052 KQE02 := 5.354060093454 KQE03 := 6.054674881291 KQE04 := -5.235476556481 KQM01 := 15.072053882204 KQM02 := -11.974604636345 KQM03 := -8.255421303054 KQM04 := 13.306105246908 KQB := 22.169715923059 !22.169701529353 QA01 : QUAD, TYPE="ETA", L=LQx/2, K1=KQA01, APER=rQx QA02 : QUAD, TYPE="ETA", L=LQx/2, K1=KQA02, APER=rQx QE01 : QUAD, TYPE="ETA", L=LQx/2, K1=KQE01, APER=rQx QE02 : QUAD, TYPE="ETA", L=LQx/2, K1=KQE02, APER=rQx QE03 : QUAD, TYPE="ETA", L=LQx/2, K1=KQE03, APER=rQx QE04 : QUAD, TYPE="ETA", L=LQx/2, K1=KQE04, APER=rQx QM01 : QUAD, TYPE="ETA", L=LQx/2, K1=KQM01, APER=rQx QM02 : QUAD, TYPE="ETA", L=LQx/2, K1=KQM02, APER=rQx QB : QUAD, TYPE="QE", L=LQE/2, K1=KQB , APER=rQE QM03 : QUAD, TYPE="ETA", L=LQx/2, K1=KQM03, APER=rQx QM04 : QUAD, TYPE="ETA", L=LQx/2, K1=KQM04, APER=rQx ! L1 KQL1 := 3.789198342593 QFL1 : QUAD, TYPE="QE", L=LQE/2, K1=+KQL1, APER=rQE QDL1 : QUAD, TYPE="QE", L=LQE/2, K1=-KQL1, APER=rQE KQA11 := -KQL1 KQA12 := 1.863910872552 QA11 : QUAD, TYPE="ETA", L=LQx/2, K1=KQA11, APER=rQx QA12 : QUAD, TYPE="ETA", L=LQx/2, K1=KQA12, APER=rQx ! BC1 KQ21201 := -9.357677119503 KQM11 := 7.960339117021 KQM12 := -8.366726970987 KQM13 := 9.860390676906 KCQ11 := 1E-12 KSQ13 := 1E-12 KCQ12 := 1E-12 KQ21301 := -0.1347 ! turn this quad OFF for LCLS operations (this is meas'd remnant field of Gdl = 0.12 kG) KQM14 := 7.079239169293 KQM15 := -6.765038435385 Q21201 : QUAD, TYPE="QE", L=LQE/2, K1=KQ21201,APER=rQE ! (QE-072 after Aug 2006) gets moved downstream of pre-LCLS location by 1.101312 m (measured parallel to main linac axis) QM11 : QUAD, TYPE="ETA", L=LQx/2, K1=KQM11, APER=rQx CQ11 : QUAD, TYPE="ETB", L=LQc/2, K1=KCQ11, APER=rQc ! now ETB tweaker quad SQ13 : QUAD, L=0.16/2,K1=KSQ13, APER=0.06, TILT ! per Kirk Bertsche CQ12 : QUAD, TYPE="ETB", L=LQc/2, K1=KCQ12, APER=rQc ! now ETB tweaker quad QM12 : QUAD, TYPE="ETA", L=LQx/2, K1=KQM12, APER=rQx QM13 : QUAD, TYPE="ETA", L=LQx/2, K1=KQM13, APER=rQx Q21301 : QUAD, TYPE="QE", L=LQE/2, K1=KQ21301,APER=rQE ! (QE-004 after Aug 2006) gets moved downstream of pre-LCLS location by 1.247066 m (measured parallel to main linac axis), and turned off for LCLS QM14 : QUAD, TYPE="ETA", L=LQx/2, K1=KQM14, APER=rQx QM15 : QUAD, TYPE="ETA", L=LQx/2, K1=KQM15, APER=rQx ! L2 KQL2 := 0.708388522907 QFL2 : QUAD, TYPE="QE", L=LQE/2, K1=+KQL2, APER=rQE QDL2 : QUAD, TYPE="QE", L=LQE/2, K1=-KQL2, APER=rQE KQ21401 := 1.044881943081 ! (QE-002 after Aug 2006) KQ21501 := -0.833170329125 ! (use pre-Aug-2006 Q21201 magnet) KQ21601 := KQL2 ! (use pre-Aug-2006 Q21301 magnet) KQ21701 := -KQL2 KQ21801 := 0.721703961622 KQ21901 := -0.721930035688 KQ22201 := 0.711368406706 KQ22301 := -0.764179973154 KQ22401 := KQL2 KQ22501 := -KQL2 KQ22601 := KQL2 KQ22701 := -KQL2 KQ22801 := 0.748596129657 KQ22901 := -0.709657173604 KQ23201 := 0.721241098608 KQ23301 := -0.741011348313 KQ23401 := KQL2 KQ23501 := -KQL2 KQ23601 := KQL2 KQ23701 := -KQL2 KQ23801 := 0.770675623153 KQ23901 := -0.726878264576 KQ24201 := 0.779404953697 KQ24301 := -0.856812505218 KQ24401 := 1.025618689057 KQ24501 := -0.931675081162 KQ24601 := 0.603160584173 Q21401 : QUAD, TYPE="QE", L=LQE/2, K1=KQ21401, APER=rQE Q21501 : QUAD, TYPE="QE", L=LQE/2, K1=KQ21501, APER=rQE Q21601 : QUAD, TYPE="QE", L=LQE/2, K1=KQ21601, APER=rQE Q21701 : QUAD, TYPE="QE", L=LQE/2, K1=KQ21701, APER=rQE Q21801 : QUAD, TYPE="QE", L=LQE/2, K1=KQ21801, APER=rQE Q21901 : QUAD, TYPE="QE", L=LQE/2, K1=KQ21901, APER=rQE Q22201 : QUAD, TYPE="QE", L=LQE/2, K1=KQ22201, APER=rQE Q22301 : QUAD, TYPE="QE", L=LQE/2, K1=KQ22301, APER=rQE Q22401 : QUAD, TYPE="QE", L=LQE/2, K1=KQ22401, APER=rQE Q22501 : QUAD, TYPE="QE", L=LQE/2, K1=KQ22501, APER=rQE Q22601 : QUAD, TYPE="QE", L=LQE/2, K1=KQ22601, APER=rQE Q22701 : QUAD, TYPE="QE", L=LQE/2, K1=KQ22701, APER=rQE Q22801 : QUAD, TYPE="QE", L=LQE/2, K1=KQ22801, APER=rQE Q22901 : QUAD, TYPE="QE", L=LQE/2, K1=KQ22901, APER=rQE Q23201 : QUAD, TYPE="QE", L=LQE/2, K1=KQ23201, APER=rQE Q23301 : QUAD, TYPE="QE", L=LQE/2, K1=KQ23301, APER=rQE Q23401 : QUAD, TYPE="QE", L=LQE/2, K1=KQ23401, APER=rQE Q23501 : QUAD, TYPE="QE", L=LQE/2, K1=KQ23501, APER=rQE Q23601 : QUAD, TYPE="QE", L=LQE/2, K1=KQ23601, APER=rQE Q23701 : QUAD, TYPE="QE", L=LQE/2, K1=KQ23701, APER=rQE Q23801 : QUAD, TYPE="QE", L=LQE/2, K1=KQ23801, APER=rQE Q23901 : QUAD, TYPE="QE", L=LQE/2, K1=KQ23901, APER=rQE Q24201 : QUAD, TYPE="QE", L=LQE/2, K1=KQ24201, APER=rQE Q24301 : QUAD, TYPE="QE", L=LQE/2, K1=KQ24301, APER=rQE Q24401 : QUAD, TYPE="QE", L=LQE/2, K1=KQ24401, APER=rQE Q24501 : QUAD, TYPE="QE", L=LQE/2, K1=KQ24501, APER=rQE Q24601 : QUAD, TYPE="QE", L=LQE/2, K1=KQ24601, APER=rQE ! BC2 KQ24701 := -1.286030138047 KQM21 := 0.508115309359 KCQ21 := 1E-12 KCQ22 := 1E-12 KQM22 := -0.590418980634 KQ24901 := 1.082042245094 Q24701A: QUAD, TYPE="QE" , L=LQE/2, K1=KQ24701, APER=rQE ! in same location as pre-LCLS (with its BPM) Q24701B: QUAD, TYPE="QE" , L=LQE/2, K1=KQ24701, APER=rQE ! 10 cm between Q24701A & B QM21 : QUAD, TYPE="0.91Q17.72", L=LQF/2, K1=KQM21, APER=rQF CQ21 : QUAD, TYPE="ETB" , L=LQc/2, K1=KCQ21, APER=rQc CQ22 : QUAD, TYPE="ETB" , L=LQc/2, K1=KCQ22, APER=rQc QM22 : QUAD, TYPE="0.91Q17.72", L=LQF/2, K1=KQM22, APER=rQF Q24901A: QUAD, TYPE="QE" , L=LQE/2, K1=KQ24901, APER=rQE ! moved 2.397400 m downstream of original Q24901 position Q24901B: QUAD, TYPE="QE" , L=LQE/2, K1=KQ24901, APER=rQE ! 10 cm between Q24901A & B (BPM in this 2nd quad) ! L3 ! KQFL3 := 0.446670469684 ! was used for 12*2*pi MUX from BX24 to BX31 ! KQDL3 := -0.424793498653 ! was used for 12*2*pi MUX from BX24 to BX31 KQFL3 := 0.395798933782 ! gives psix = 50.76 deg, 44.64 deg, 45.00 deg between four LI28 wires KQDL3 := -0.395649286346 ! gives TCAV3 -> OTR30 right + WS28 psiy: 48.96 deg, 45.72 deg, 43.92 deg QFL3 : QUAD, TYPE="QE", L=LQE/2, K1=KQFL3, APER=rQE QDL3 : QUAD, TYPE="QE", L=LQE/2, K1=KQDL3, APER=rQE KQ25201 := 0.697993592575 KQ25301 := -0.478388226374 KQ25401 := 0.42896785871 KQ25501 := -0.399864956514 KQ25601 := KQFL3 KQ25701 := KQDL3 KQ25801 := 0.407168436855 KQ25901 := -0.388171234952 KQ26201 := 0.388578933647 KQ26301 := -0.405404843557 KQ26401 := KQFL3 KQ26501 := KQDL3 KQ26601 := KQFL3 KQ26701 := KQDL3 KQ26801 := 0.406308742855 KQ26901 := -0.388549789828 KQ27201 := 0.390161854669 KQ27301 := -0.406474370795 KQ27401 := KQFL3 KQ27501 := KQDL3 KQ27601 := KQFL3 KQ27701 := KQDL3 KQ27801 := 0.406495928662 KQ27901 := -0.388870517181 KQ28201 := 0.390352348197 KQ28301 := -0.406461529502 KQ28401 := KQFL3 KQ28501 := KQDL3 KQ28601 := KQFL3 KQ28701 := KQDL3 KQ28801 := 0.406649614831 KQ28901 := -0.389077444001 KQ29201 := 0.390429567548 KQ29301 := -0.406416613477 KQ29401 := KQFL3 KQ29501 := KQDL3 KQ29601 := KQFL3 KQ29701 := KQDL3 KQ29801 := 0.406588653506 KQ29901 := -0.389037213556 KQ30201 := 0.39027307525 KQ30301 := -0.406178588622 KQ30401 := KQFL3 KQ30501 := -0.395648794699 !KQDL3 KQ30601 := 0.395797744026 !KQFL3 KQ30701 := -0.395649272846 !KQDL3 !KQ30801 := 0.418744300937 !0.418743774352 !KQ30801 := 0.484416787325 !copy from LCLS2sc LTU.xsif Q25201 : QUAD, TYPE="QE", L=LQE/2, K1=KQ25201, APER=rQE Q25301 : QUAD, TYPE="QE", L=LQE/2, K1=KQ25301, APER=rQE Q25401 : QUAD, TYPE="QE", L=LQE/2, K1=KQ25401, APER=rQE Q25501 : QUAD, TYPE="QE", L=LQE/2, K1=KQ25501, APER=rQE Q25601 : QUAD, TYPE="QE", L=LQE/2, K1=KQ25601, APER=rQE Q25701 : QUAD, TYPE="QE", L=LQE/2, K1=KQ25701, APER=rQE Q25801 : QUAD, TYPE="QE", L=LQE/2, K1=KQ25801, APER=rQE Q25901 : QUAD, TYPE="QE", L=LQE/2, K1=KQ25901, APER=rQE Q26201 : QUAD, TYPE="QE", L=LQE/2, K1=KQ26201, APER=rQE Q26301 : QUAD, TYPE="QE", L=LQE/2, K1=KQ26301, APER=rQE Q26401 : QUAD, TYPE="QE", L=LQE/2, K1=KQ26401, APER=rQE Q26501 : QUAD, TYPE="QE", L=LQE/2, K1=KQ26501, APER=rQE Q26601 : QUAD, TYPE="QE", L=LQE/2, K1=KQ26601, APER=rQE Q26701 : QUAD, TYPE="QE", L=LQE/2, K1=KQ26701, APER=rQE Q26801 : QUAD, TYPE="QE", L=LQE/2, K1=KQ26801, APER=rQE Q26901 : QUAD, TYPE="QE", L=LQE/2, K1=KQ26901, APER=rQE Q27201 : QUAD, TYPE="QE", L=LQE/2, K1=KQ27201, APER=rQE Q27301 : QUAD, TYPE="QE", L=LQE/2, K1=KQ27301, APER=rQE Q27401 : QUAD, TYPE="QE", L=LQE/2, K1=KQ27401, APER=rQE Q27501 : QUAD, TYPE="QE", L=LQE/2, K1=KQ27501, APER=rQE Q27601 : QUAD, TYPE="QE", L=LQE/2, K1=KQ27601, APER=rQE Q27701 : QUAD, TYPE="QE", L=LQE/2, K1=KQ27701, APER=rQE Q27801 : QUAD, TYPE="QE", L=LQE/2, K1=KQ27801, APER=rQE Q27901 : QUAD, TYPE="QE", L=LQE/2, K1=KQ27901, APER=rQE Q28201 : QUAD, TYPE="QE", L=LQE/2, K1=KQ28201, APER=rQE Q28301 : QUAD, TYPE="QE", L=LQE/2, K1=KQ28301, APER=rQE Q28401 : QUAD, TYPE="QE", L=LQE/2, K1=KQ28401, APER=rQE Q28501 : QUAD, TYPE="QE", L=LQE/2, K1=KQ28501, APER=rQE Q28601 : QUAD, TYPE="QE", L=LQE/2, K1=KQ28601, APER=rQE Q28701 : QUAD, TYPE="QE", L=LQE/2, K1=KQ28701, APER=rQE Q28801 : QUAD, TYPE="QE", L=LQE/2, K1=KQ28801, APER=rQE Q28901 : QUAD, TYPE="QE", L=LQE/2, K1=KQ28901, APER=rQE Q29201 : QUAD, TYPE="QE", L=LQE/2, K1=KQ29201, APER=rQE Q29301 : QUAD, TYPE="QE", L=LQE/2, K1=KQ29301, APER=rQE Q29401 : QUAD, TYPE="QE", L=LQE/2, K1=KQ29401, APER=rQE Q29501 : QUAD, TYPE="QE", L=LQE/2, K1=KQ29501, APER=rQE Q29601 : QUAD, TYPE="QE", L=LQE/2, K1=KQ29601, APER=rQE Q29701 : QUAD, TYPE="QE", L=LQE/2, K1=KQ29701, APER=rQE Q29801 : QUAD, TYPE="QE", L=LQE/2, K1=KQ29801, APER=rQE Q29901 : QUAD, TYPE="QE", L=LQE/2, K1=KQ29901, APER=rQE Q30201 : QUAD, TYPE="QE", L=LQE/2, K1=KQ30201, APER=rQE Q30301 : QUAD, TYPE="QE", L=LQE/2, K1=KQ30301, APER=rQE Q30401 : QUAD, TYPE="QE", L=LQE/2, K1=KQ30401, APER=rQE Q30501 : QUAD, TYPE="QE", L=LQE/2, K1=KQ30501, APER=rQE Q30601 : QUAD, TYPE="QE", L=LQE/2, K1=KQ30601, APER=rQE Q30615A: MARK, TYPE="QW" !power supply decommissioned Q30615B: MARK, TYPE="QW" !power supply decommissioned Q30615C: MARK, TYPE="QW" !power supply decommissioned Q30701 : QUAD, TYPE="QE", L=LQE/2, K1=KQ30701, APER=rQE Q30715A: MARK, TYPE="QW" !power supply decommissioned Q30715B: MARK, TYPE="QW" !power supply decommissioned Q30715C: MARK, TYPE="QW" !power supply decommissioned Q30801 : QUAD, TYPE="QE", L=LQE/2, K1=KQ30801, APER=rQE ! ============================================================================== ! DRIFTs ! ------------------------------------------------------------------------------ ! L1/2/3 FODO cells D9 : DRIF, L=DLWL9 D10 : DRIF, L=DLWL10 DAQ1 : DRIF, L=0.0342 DAQ2 : DRIF, L=0.027 ! injector geometry LGGUN := 7.51*0.3048 LGL0 := 2*3.0441+1.0 LGBEND := 0.95 + 2*0.3048 ! add 12" to either side of QB for more room (22JAN04 - PE) LGEMIT := 9.000328707307 LGMATCH := 1.5134597681 DGGUN : DRIF, L=LGGUN DGL0 : DRIF, L=LGL0 ! L0 LOADLOCK : DRIF, L=LGGUN-1.42 DL00 : DRIF, L=-LOADLOCK[L] !from cathode back to u/s end of loadlock DL01a : DRIF, L=0.19601-LSOL1/2 DL01a1 : DRIF, L=0.07851 DL01a2 : DRIF, L=0.11609 DL01a3 : DRIF, L=0.10461 DL01a4 : DRIF, L=0.0170+0.0014 DL01a5 : DRIF, L=0.0132-0.00223 DL01b : DRIF, L=0.0825 DL01c : DRIF, L=0.1340-0.00353-0.003175 DL01d : DRIF, L=0.1008464-0.0155757 DL01h : DRIF, L=0.0581886 DL01e : DRIF, L=0.2286-DXG0[L]-0.00536+0.0155757 DL01f : DRIF, L=0.1353+0.00708 DL01f2 : DRIF, L=0.0277+0.00167 DL01g : DRIF, L=0.0740-0.00341 DL02a1 : DRIF, L=0.066356+0.0021436-0.008205 DL02a2 : DRIF, L=0.104580+0.008205 DL02a3 : DRIF, L=0.098776-LQx/2+0.028834 DL02b1 : DRIF, L=0.169672-LQx/2-0.028834+0.007646 DL02b2 : DRIF, L=0.185928-LQx/2-0.007646+0.001610 DL02c : DRIF, L=0.121498-LQx/2-0.001610 ! Heater-Chicane: ! LSRHTR_ON := 1E-12 !set to 1E-12 for laser heater bends & undulator OFF and 1.0 for ON (nominal) LSRHTR_ON := 1 !set to 1E-12 for laser heater bends & undulator OFF and 1.0 for ON (nominal) Brhoh := Cb*Ei !beam rigidity at heater (kG-m) BBh1 := -4.751481741801*LSRHTR_ON !heater-chicane bend field for 35-mm etaX_pk (kG) RBh1 := Brhoh/BBh1 !heater-chicane bend radius (m) ABh1 := ASIN(LBh/RBh1) !heater-chicane bend angle (rad) ABh1S := ASIN((LBh/2)/RBh1) !"short" half heater-chicane bend angle (rad) LBh1S := RBh1*ABh1S !"short" half heater-chicane bend path length (m) ABh1L := ABh1-ABh1S !"long" half heater-chicane bend angle (rad) LBh1L := RBh1*ABh1L !"long" half heater-chicane bend path length (m) Dh00 : DRIF, L=0.13453045-dLBh/2 Dh01 : DRIF, L=(0.155-dLBh)/COS(ABh1), TYPE="CSR" Dh02a : DRIF, L=0.06717020-dLBh/2, TYPE="CSR" Dh03a : DRIF, L=0.09290825, TYPE="CSR" Dh03b : DRIF, L=0.08401830, TYPE="CSR" Dh02b : DRIF, L=0.09503020-dLBh/2, TYPE="CSR" Dh06 : DRIF, L=0.13010070-dLBh/2, TYPE="CSR" HTRUND : INST BXh1A : SBEN, TYPE="5D3.9", L=LBh1S, ANGLE=+ABh1S, HGAP=GBh/2, & E1=0, FINT=0.400, FINTX=0 BXh1B : SBEN, TYPE="5D3.9", L=LBh1L, ANGLE=+ABh1L, HGAP=GBh/2, & FINT=0, E2=+ABh1, FINTX=0.400 BXh2A : SBEN, TYPE="5D3.9", L=LBh1L, ANGLE=-ABh1L, HGAP=GBh/2, & E1=-ABh1, FINT=0.400, FINTX=0 BXh2B : SBEN, TYPE="5D3.9", L=LBh1S, ANGLE=-ABh1S, HGAP=GBh/2, & FINT=0, E2=0, FINTX=0.400 BXh3A : SBEN, TYPE="5D3.9", L=LBh1S, ANGLE=-ABh1S, HGAP=GBh/2, & E1=0, FINT=0.400, FINTX=0 BXh3B : SBEN, TYPE="5D3.9", L=LBh1L, ANGLE=-ABh1L, HGAP=GBh/2, & FINT=0, E2=-ABh1, FINTX=0.400 BXh4A : SBEN, TYPE="5D3.9", L=LBh1L, ANGLE=+ABh1L, HGAP=GBh/2, & E1=+ABh1, FINT=0.400, FINTX=0 BXh4B : SBEN, TYPE="5D3.9", L=LBh1S, ANGLE=+ABh1S, HGAP=GBh/2, & FINT=0, E2=0, FINTX=0.400 ! Laser-Heater Undulator Model: lam := 0.054 ! laser-heater undulator period [m] lamr := 758E-9 ! heater laser wavelength [m] gami := Ei/mc2 ! Lorentz energy factor in laser-heater undulator [ ] K_und := LSRHTR_ON*sqrt(2*(lamr*2*gami^2/lam - 1)) ! undulator K for laser heater und. Lhun := 0.506263 ! length of laser-heater undulator kqlh := (K_und*2*pi/lam/sqrt(2)/gami)^2 ! natural undulator focusing "k" in y-plane [m^-2] !VALUE,gami,kqlh,K_und LHBEG : MARK LHEND : MARK ! laser-heater undulator modeled as R-matrix to include vertical natural focusing: LH_UND : MATRIX, L=Lhun/2, & RM(1,1) = 1.0, & RM(1,2) = Lhun/2, & RM(2,1) = 0.0, & RM(2,2) = 1.0, & RM(3,3) = cos(Lhun/2*sqrt(kqlh)), & RM(3,4) = sin(Lhun/2*sqrt(kqlh))/sqrt(kqlh), & RM(4,3) = -sin(Lhun/2*sqrt(kqlh))*sqrt(kqlh), & RM(4,4) = cos(Lhun/2*sqrt(kqlh)) ! RM(5,6) = Lhun/2/(gami^2)*(1+(K_und^2)/2) !VALUE, LH_UND[RM(1,2)],Lhun/2 !VALUE, LH_UND[RM(3,3)],cos(Lhun/2*sqrt(kqlh)) !VALUE, LH_UND[RM(3,4)],sin(Lhun/2*sqrt(kqlh))/sqrt(kqlh) !VALUE, LH_UND[RM(4,3)],-sin(Lhun/2*sqrt(kqlh))*sqrt(kqlh) !VALUE, LH_UND[RM(4,4)],cos(Lhun/2*sqrt(kqlh)) !VALUE, LH_UND[RM(5,6)],Lhun/2/(gami^2)*(1+(K_und^2)/2) ! DL1 LWS01_03 := 3.827458 ! distance from WS01 to WS03 wire centers [m] (changed 06MAY05 -PE) BMIN0 := LWS01_03/SQRT(3)/2 ! betaX=betaY at WS02 where waist is located (12NOV03 -PE) !VALUE, BMIN0 MRK0 : MARK DE00 : DRIF, L=0.024994 DE00a: DRIF, L=0.070613-LQx/2 DE01a: DRIF, L=0.130373-LQx/2 DE01b: DRIF, L=0.176359-LQx/2 DE01c: DRIF, L=0.094781 DE02 : DRIF, L=0.0897395-LQx/2 DE03a: DRIF, L=0.16832-LQx/2 DE03b: DRIF, L=0.047581 DE03c: DRIF, L=0.190499-LQx/2 DE04 : DRIF, L=0.197688-LQx/2 DE05 : DRIF, L=0.151968 DE05a: DRIF, L=DE05[L]/2 DE05c: DRIF, L=0.104470 DE06b: DRIF, L=0.2478024 DE06a: DRIF, L=LWS01_03/2-DE05[L]-DE05c[L]-DE06b[L] DE06d: DRIF, L=0.1638307 DE06e: DRIF, L=LWS01_03/2-DE05[L]-DE06d[L] DE07 : DRIF, L=0.2045007-LQx/2+0.305E-3 DE08 : DRIF, L=0.2318721-LQx/2-0.03 DE08a: DRIF, L=0.153330+0.03 DE08b: DRIF, L=0.170620-LQx/2 DE09 : DRIF, L=0.27745-LQx/2 dLDB00 := -0.54842233769E-6 DB00a: DRIF, L=0.3997+dLDB00, TYPE="CSR" DB00b: DRIF, L=0.161, TYPE="CSR" DB00c: DRIF, L=0.2191-LQE/2, TYPE="CSR" DB00d: DRIF, L=0.342-LQE/2, TYPE="CSR" DB00e: DRIF, L=0.4378+dLDB00, TYPE="CSR" dLDM00 := 2*ABS(dLDB00)*COS(ADL1/2) DM00 : DRIF, L=0.203400-ZOFFINJ+0.03+dLDM00, TYPE="CSR" ! move entire injector ~12 mm dntr. (Nov. 17, 2004 - PE) DM00a: DRIF, L=0.224683-LQx/2-0.03, TYPE="CSR" DM01 : DRIF, L=0.142367-LQx/2, TYPE="CSR" DM01a: DRIF, L=0.262800-LQx/2, TYPE="CSR" DM02 : DRIF, L=0.194200-LQx/2 DM02a: DRIF, L=0.157448 ! L1 DAQA1 : DRIF, L=0.033450+dz_QA11 DAQA2 : DRIF, L=0.033450-dz_QA11 DAQA3 : DRIF, L=0.033450 DAQA4 : DRIF, L=0.033450 ! BC1 LWW1 := 1.656196 ! WS11-12 drift length and therefore ~ beam size BMIN1 := LWW1/SQRT(3) ! betaX,Y at WS12 DL1Xa : DRIF, L=0.093369 DL1Xb : DRIF, L=0.2 DM10a : DRIF, L=0.227400-0.022322 DM10c : DRIF, L=0.122322+dz_Q21201 DM10x : DRIF, L=0.083617-dz_Q21201 DM11 : DRIF, L=0.272500+0.006383 DM12 : DRIF, L=0.127801 DBQ1 : DRIF, L=(0.400381-LB1/2-LQc/2)/COS(AB11), TYPE="CSR" D11o : DRIF, L=LD11o-(DBQ1[L]+LQc)-2E-7, TYPE="CSR" D11oa : DRIF, L=LD11oa, TYPE="CSR" D11ob : DRIF, L=LD11ob-(DBQ1[L]+LQc)-2E-7, TYPE="CSR" DDG0 : DRIF, L=0.1698-0.084915+0.0508-0.0045, TYPE="CSR" ! additional drift in BC2 center prior to diag. package DDGA : DRIF, L=0.084915+0.0508-0.0045, TYPE="CSR" ! additional drift in BC2 center prior to diag. package DDG1 : DRIF, L=0.2891-0.04046, TYPE="CSR" ! BC1 and BC2 diag. package drifts (BX*2B to BPM) DDG2 : DRIF, L=0.1240+0.04046, TYPE="CSR" ! BC1 and BC2 diag. package drifts (BPM to CE) DDG3 : DRIF, L=0.1460+0.036606, TYPE="CSR" ! BC1 and BC2 diag. package drifts (CE to OTR) DDG4 : DRIF, L=0.2711-0.036606, TYPE="CSR" ! BC1 and BC2 diag. package drifts (OTR to BX*3A) DM13a : DRIF, L=0.323450/2, TYPE="CSR" DM13b : DRIF, L=0.323450/2, TYPE="CSR" DM14a : DRIF, L=0.25-0.07615, TYPE="CSR" DM14b : DRIF, L=0.15638875-0.0254+0.07615, TYPE="CSR" DM14c : DRIF, L=0.15638875+0.0254, TYPE="CSR" DM15a : DRIF, L=0.252872-0.1524, TYPE="CSR" DM15b : DRIF, L=0.2836740-0.0826, TYPE="CSR" DM15c : DRIF, L=0.1524+0.0826, TYPE="CSR" DWW1a : DRIF, L=LWW1 DWW1b : DRIF, L=0.295 DWW1c1: DRIF, L=0.812030-0.295-0.1017 DWW1c2: DRIF, L=LWW1-1.427096+0.1017-0.0142-0.014199 DWW1d : DRIF, L=0.346099 DWW1e : DRIF, L=0.297366 DM16 : DRIF, L=0.25+dz_Q21301 DM17a : DRIF, L=0.2658341-dz_Q21301 DM16a : DRIF, L=0.0 DM16b : DRIF, L=0.0 DM17b : DRIF, L=0.4008829 DM17c : DRIF, L=0.385417+dz_QM14 DM18a : DRIF, L=0.228300-dz_QM14 DM18b : DRIF, L=0.228200+dz_QM15 DM19 : DRIF, L=0.099400-dz_QM15+0.000001 !force Z=2059.732900 m at ZLIN04 ! L2 and L3 DAQ3 : DRIF, L=0.3533 DAQ4 : DRIF, L=2.5527 DAQ5 : DRIF, L=2.841-0.3048-1.2192 DAQ6 : DRIF, L=0.2373 DAQ7 : DRIF, L=0.2748 DAQ8 : DRIF, L=2.6312 DAQ8A : DRIF, L=0.5+0.003200 DAQ8B : DRIF, L=2.1312-0.003200 DAQ12 : DRIF, L=0.2286 DAQ13 : DRIF, L=0.0231 DAQ14 : DRIF, L=0.2130 DAQ15 : DRIF, L=0.0087 DAQ16 : DRIF, L=0.2274 DAQ17 : DRIF, L=0.061900 !30-8c exit to IV30-9 D255a : DRIF, L=0.06621-0.001510 D255b : DRIF, L=0.11184+0.001510 D255c : DRIF, L=0.17805-0.275500+0.25 D255d : DRIF, L=0.03420+0.275500 D256a : DRIF, L=2.350-1.1919-0.559100 D256b : DRIF, L=0.559100 D256c : DRIF, L=0.61475 !0.540500-0.40505 D256d : DRIF, L=0.21115 ! BC2 DM21Z : DRIF, L=0.0828006-0.027 DM21A : DRIF, L=0.3199994 DM21H : DRIF, L=0.193 DM21B : DRIF, L=0.6340002 DM21C : DRIF, L=0.3202404 DM21D : DRIF, L=0.139536 DM21E : DRIF, L=0.1996034-0.0045 DM20 : DRIF, L=0.034200 DBQ2a : DRIF, L=LDo1, TYPE="CSR" D21oa : DRIF, L=LDo2, TYPE="CSR" D21i : DRIF, L=LD21i/2, TYPE="CSR" D21ob : DRIF, L=LDo3, TYPE="CSR" DBQ2b : DRIF, L=LDo4, TYPE="CSR" D21w : DRIF, L=0.311000-0.0045, TYPE="CSR" D21x : DRIF, L=0.208700, TYPE="CSR" D21y : DRIF, L=0.114235, TYPE="CSR" DM23B : DRIF, L=0.050405, TYPE="CSR" DM24A : DRIF, L=0.129440, TYPE="CSR" DM24B : DRIF, L=0.178000, TYPE="CSR" DM24D : DRIF, L=0.070700, TYPE="CSR" DM24C : DRIF, L=0.106300, TYPE="CSR" DM25 : DRIF, L=0.160400 ! ============================================================================== ! MARKERs ! ------------------------------------------------------------------------------ ! wire scanners WS01 : WIRE, TYPE="slow" !DL1- emittance WS02 : WIRE, TYPE="fast" !DL1- emittance WS03 : WIRE, TYPE="fast" !DL1- emittance WS04 : WIRE, TYPE="slow" !DL1- energy spread WS11 : WIRE, TYPE="slow" !BC1+ emittance WS12 : WIRE, TYPE="slow" !BC1+ emittance WS13 : WIRE, TYPE="slow" !BC1+ emittance ! WS21 : WIRE, TYPE="slow" !LI24 emittance ! WS22 : WIRE, TYPE="slow" !LI24 emittance ! WS23 : WIRE, TYPE="slow" !LI24 emittance WS24 : WIRE, TYPE="slow" !BC2- emittance DWS21 : MARK !someday will be a wire-scanner again? DWS22 : MARK !someday will be a wire-scanner again? DWS23 : MARK !someday will be a wire-scanner again? ! DWS24 : MARK !someday will be a wire-scanner again? WS27644: WIRE, TYPE="slow" !LI27 emittance (existing; moved) WS28144: WIRE, TYPE="slow" !LI28 emittance WS28444: WIRE, TYPE="slow" !LI28 emittance WS28744: WIRE, TYPE="slow" !LI28 emittance (existing; moved) ! profile monitors YAG01 : PROF, TYPE="YAG" !gun (15.5 in from cathode, per J. Schmerge, June 17, 2003; -PE) YAG02 : PROF, TYPE="YAG" !gun (need proper positions still - June 10, 2003) YAG03 : PROF, TYPE="YAG" !after L0-a (~ 60 MeV) - center of device in MAD is defined as center of YAG crystal, not mirror YAG04 : PROF, TYPE="YAG" !temporarily (Dec. '06 - July '07) placed in laser-heater region (135 MeV) - center of device in MAD is defined as center of YAG crystal, not mirror PH01 : INST !phase measurement RF cavity between L0-a and L0-b PH02 : INST !phase measurement RF cavity after BC1 PH03 : INST !phase measurement RF cavity after BC2 VV01 : MARK !vacuum valve near gun VV02 : MARK !vacuum valve in injector VV03 : MARK !vacuum valve in injector VV04 : MARK !vacuum valve in injector VVX1 : MARK, TYPE="MANUAL" !vacuum valve before X-band structure VVX2 : MARK, TYPE="MANUAL" !vacuum valve after X-band structure VV21 : MARK !vacuum valve in front of BC2 VV22 : MARK !vacuum valve after BC2 RST1 : INST !radiation stopper near WS02 in injector OTRH1 : PROF, TYPE="OTR" !Laser-heater OTR screen just upbeam of heater-undulator (12NOV03 - PE) OTRH2 : PROF, TYPE="OTR" !Laser-heater OTR screen just dnbeam of heater-undulator (12NOV03 - PE) ! DOTRH1 : MARK !Laser-heater OTR screen PLACE-HOLDER just upbeam of heater-undulator (not installed until summer 2008) ! DOTRH2 : MARK !Laser-heater OTR screen PLACE-HOLDER just dnbeam of heater-undulator (not installed until summer 2008) OTR1 : PROF, TYPE="OTR" !DL1-emit OTR2 : PROF, TYPE="OTR" !DL1-emit OTR3 : PROF, TYPE="OTR" !DL1-emit OTR4 : PROF, TYPE="OTR" !DL1 slice and proj. energy spread OTR11 : PROF, TYPE="OTR" !BC1 energy spread OTR12 : PROF, TYPE="OTR" !BC1 emittance OTR21 : PROF, TYPE="OTR" !BC2 energy spread !OTR22 : PROF, TYPE="OTR" !moved to XLEAP (February 2017) OTR_TCAV : PROF, TYPE="OTR" !LI25 longitudinal diagnostics ! bunch length monitors BL11 : BLMO !BC1+ (CSR-based relative bunch length monitor) BL12 : BLMO !BC1+ (ceramic gap-based relative bunch length monitor) BL21 : BLMO !BC2+ (CSR-based relative bunch length monitor) BL22 : BLMO !BC2+ (ceramic gap-based relative bunch length monitor) ! bunch charge monitors (toroids) IM01 : IMON !L0 IM02 : IMON !L0 IMS1 : IMON !135-MeV spectrometer IM03 : IMON !DL1- IMBC1I : IMON !BC1 input toriod (comparator with IMBC1O) IMBC1O : IMON !BC1 output toroid (comparator with IMBC1I) IMBC2I : IMON !BC2 input toroid (comparator with IMBC2O) IMBC2O : IMON !BC2 output toroid (comparator with IMBC2I) ! other diagnostics FC01 : INST !L0 Faraday cup w/screen AM00 : INST !gun laser normal incidence mirror AM01 : INST !alignment mirror CR01 : INST !Cerenkov radiator bunch length monitor ! collimators CE11 : RCOL, TYPE="HCOLL" !adjustable energy (x) collimator in middle of BC1 chicane CE21 : RCOL, TYPE="HCOLL" !adjustable energy (x) collimator in middle of BC2 chicane ! dumps TD11 : INST !BC1+ insertable block ! miscellany L0beg : MARK SOL1BK : SOLENOID,L=1E-9,KS=0 !gun-bucking-solenoid (set to ~zero length and strength, with longitudinal unknown for now) CATHODE : INST SOL1 : SOLENOID,L=LSOL1/2,KS=1E-9 !gun-solenoid (set to zero strength) SOL2 : SOLENOID,L=1E-9,KS=1E-9 !2nd-solenoid (set to ~zero length and strength, with longitudinal position as the actual solenoid's center) L0end : MARK L0aWAKE : MARK EMAT : MARK ! for Elegant only to remove energy error in DL1 bends DL1beg : MARK DLFDa : MARK ! dual-feed input coupler location at start of L0-a RF structure L0aMID : MARK OUTCPa : MARK ! output coupler location at end of L0-a RF structure L0bBEG : MARK DLFDb : MARK ! dual-feed input coupler location at start of L0-b RF structure L0bMID : MARK OUTCPb : MARK ! output coupler location at end of L0-b RF structure CNT0 : MARK DL1end : MARK L1beg : MARK L1end : MARK BC1mrk : MARK XBEG : MARK !before X-band RF, but after L1 XEND : MARK !after X-band RF, but before BC1 BC1beg : MARK CNT1 : MARK !ELEGANT will correct the orbit here for CSR-steering BC1end : MARK BC1fin : MARK L2beg : MARK LI21beg : MARK LI21end : MARK LI22beg : MARK LI22end : MARK LI23beg : MARK LI23end : MARK LI24beg : MARK LI24end : MARK L2end : MARK BC2mrk : MARK BC2beg : MARK CNT2 : MARK !ELEGANT will correct the orbit here for CSR-steering BC2end : MARK BC2fin : MARK L3beg : MARK LI25beg : MARK LI25end : MARK LI26beg : MARK LI26end : MARK LI27beg : MARK LI27end : MARK LI28beg : MARK LI28end : MARK LI29beg : MARK LI29end : MARK LI30beg : MARK RWWAKEss : MARK !will be resistive wall wake of stainless steel in ELEGANT LI30end : MARK L3end : MARK ! Permanent reference points in the linac (and LTU: Z') Z-coordinate system (in meters) ! (NOTE: Z' is measured parallel to the undulator axis which is at an angle of ! 2*AVB [=4.668514 mrad on May 4, 2004] w.r.t. the linac axis): ! (Note Q20-901 is at 2029.4060 m in drawing ID-380-802-00 pg. 2 - this does not agree ! with Woodley/Seeman database at 2029.3939 m. We assume drawing is right -PE, June 11, 2004) ! ============================================================================================ ZLIN00 : MARK ! face of L0-a entrance flange : Z=2019.106625 (= 1.459000 m from cathode parallel to injector line, X = 9.612087) ! DBMARK98 : MARK ! (135SPECT)135-MeV spect. dump: Z=2036.774471 ZLIN01 : MARK ! entrance to 21-1b : Z=2035.035130 (= 20*101.600 m + 3.0441 m - 0.00897 m: 8/1/05) ZLIN02 : MARK ! center of QUAD LI21 201 : (not used anymore since Q21201 is a few mm off) [was Z=2045.436400 pre 1/11/07] ZLIN03 : MARK ! center of QUAD LI21 301 : (not used anymore since Q21301 is a few mm off) [was Z=2057.855466 pre 1/11/07] ZLIN04 : MARK ! entrance to 21-3b : Z=2059.732900 ZLIN05 : MARK ! start of LI22 : Z=2133.600000 ZLIN06 : MARK ! start of LI23 : Z=2235.200000 ZLIN07 : MARK ! start of LI24 : Z=2336.800000 ZLIN08 : MARK ! center of QUAD LI24 701 (A) : Z=2410.786000 (not moved) ZLIN09 : MARK ! start of LI25 : Z=2438.400000 ZLIN10 : MARK ! start of LI26 : Z=2540.000000 ZLIN11 : MARK ! start of LI27 : Z=2641.600000 ZLIN12 : MARK ! start of LI28 : Z=2743.200000 ZLIN13 : MARK ! start of LI29 : Z=2844.800000 ZLIN14 : MARK ! start of LI30 : Z=2946.400000 ! DBMARK29 : MARK ! end of linac : Z=3042.005000 ! WOODDOOR : MARK ! start of BSY : Z=3050.512000 ! S100 : MARK ! Station 100 : Z=3048.000000 ! ============================================================================== ! existing XCORs ! ------------------------------------------------------------------------------ ! XC460009T : HKIC ! XC460026T : HKIC ! XC460034T : HKIC !do not use to steer ... bad results in Elegant ! XC460036T : HKIC !do not use to steer ... bad results in Elegant ! XC920020T : HKIC ! XC921010T : HKIC !do not use to steer ... bad results in Elegant ! XCBSY09 : HKIC ! names changed from above to these (Sep. 2008) ! XCBSY26 : HKIC ! XCBSY36 : HKIC !do not use to steer ... bad results in Elegant ! XCBSYQ2 : HKIC, TYPE="class-4" !was XCBSY09 (Mar. 2016) XCBSY34 : HKIC !do not use to steer ... bad results in Elegant ! XCBSYQ3 : HKIC, TYPE="class-4" !was XCBSY09 (Mar. 2016) XCBSY60 : HKIC XCBSY81 : HKIC !do not use to steer ... bad results in Elegant ! ============================================================================== ! new XCORs ! ------------------------------------------------------------------------------ XC00 : HKIC,TYPE="class-S" XC01 : HKIC,TYPE="class-G" XC02 : HKIC,TYPE="c-1s-L0a" XC03 : HKIC,TYPE="class-1s" XC04 : HKIC,TYPE="class-1s" ! fast-feedback (loop-1) XC05 : HKIC,TYPE="class-1s" ! calibrated to <1% XC06 : HKIC,TYPE="class-1t" XC07 : HKIC,TYPE="class-1a" ! fast-feedback (loop-1) XC08 : HKIC,TYPE="class-1a" XC09 : HKIC,TYPE="class-1a" XC10 : HKIC,TYPE="class-1a" XC11 : HKIC,TYPE="class-1s" XCA11 : HKIC,TYPE="class-1s" XCA12 : HKIC,TYPE="class-1s" ! calibrated to <1% XC21202: HKIC,TYPE="type-4" ! pulled off structure and replaced on beamline? XC21302: HKIC,TYPE="type-4" ! pulled off structure and replaced on beamline? XCM11 : HKIC,TYPE="class-1x" XCM13 : HKIC,TYPE="class-1a" XCM14 : HKIC,TYPE="class-1a" ! ============================================================================== ! existing YCORs ! ------------------------------------------------------------------------------ ! YC460010T : VKIC ! YC460027T : VKIC !do not use to steer ... bad results in Elegant ! YC460035T : VKIC !do not use to steer ... bad results in Elegant ! YC460037T : VKIC ! YC920020T : VKIC ! YC921010T : VKIC !do not use to steer ... bad results in Elegant ! YCBSY10 : VKIC ! names changed from above to these (Sep. 2008) ! YCBSYQ1 : VKIC, TYPE="class-4" !was YCBSY10 (Mar. 2016) YCBSY27 : VKIC !do not use to steer ... bad results in Elegant ! YCBSY35 : VKIC !do not use to steer ... bad results in Elegant YCBSY37 : VKIC ! YCBSY62 : VKIC YCBSY82 : VKIC !do not use to steer ... bad results in Elegant ! ============================================================================== ! new YCORs ! ------------------------------------------------------------------------------ YC00 : VKIC,TYPE="class-S" YC01 : VKIC,TYPE="class-G" YC02 : VKIC,TYPE="c-1s-L0a" YC03 : VKIC,TYPE="class-1s" YC04 : VKIC,TYPE="class-1s" ! fast-feedback (loop-1) YC05 : VKIC,TYPE="class-1s" ! calibrated to <1% YC06 : VKIC,TYPE="class-1t" YC07 : VKIC,TYPE="class-1a" ! fast-feedback (loop-1) YC08 : VKIC,TYPE="class-1a" YC09 : VKIC,TYPE="class-1a" YC10 : VKIC,TYPE="class-1a" YC11 : VKIC,TYPE="class-1s" YCA11 : VKIC,TYPE="class-1s" ! calibrated to <1% YCA12 : VKIC,TYPE="class-1s" YC21203 : VKIC,TYPE="type-4" YC21303 : VKIC,TYPE="type-4" ! pulled off structure and replaced on beamline? YCM11 : VKIC,TYPE="class-1x" YCM12 : VKIC,TYPE="class-1a" YCM15 : VKIC,TYPE="class-1a" YC5 : VKIC,TYPE="class-4" ! ============================================================================== ! existing BPMs ! ------------------------------------------------------------------------------ BPM21201 : MONI, TYPE="20_um_res" BPM21301 : MONI, TYPE="20_um_res" BPM21401 : MONI, TYPE="10_um_res" BPM21501 : MONI, TYPE="10_um_res" BPM21601 : MONI, TYPE="10_um_res" BPM21701 : MONI, TYPE="10_um_res" BPM21801 : MONI, TYPE="10_um_res" BPM21901 : MONI, TYPE="10_um_res" BPM22201 : MONI, TYPE="10_um_res" BPM22301 : MONI, TYPE="10_um_res" BPM22401 : MONI, TYPE="10_um_res" BPM22501 : MONI, TYPE="10_um_res" BPM22601 : MONI, TYPE="10_um_res" BPM22701 : MONI, TYPE="10_um_res" BPM22801 : MONI, TYPE="10_um_res" BPM22901 : MONI, TYPE="10_um_res" BPM23201 : MONI, TYPE="10_um_res" BPM23301 : MONI, TYPE="10_um_res" BPM23401 : MONI, TYPE="10_um_res" BPM23501 : MONI, TYPE="10_um_res" BPM23601 : MONI, TYPE="10_um_res" BPM23701 : MONI, TYPE="10_um_res" BPM23801 : MONI, TYPE="10_um_res" BPM23901 : MONI, TYPE="10_um_res" BPM24201 : MONI, TYPE="10_um_res" BPM24301 : MONI, TYPE="10_um_res" BPM24401 : MONI, TYPE="10_um_res" BPM24501 : MONI, TYPE="10_um_res" BPM24601 : MONI, TYPE="10_um_res" BPM24701 : MONI, TYPE="10_um_res" BPM24901 : MONI, TYPE="10_um_res" BPM25201 : MONI, TYPE="10_um_res" BPM25301 : MONI, TYPE="10_um_res" BPM25401 : MONI, TYPE="10_um_res" BPM25501 : MONI, TYPE="10_um_res" BPM25601 : MONI, TYPE="10_um_res" BPM25701 : MONI, TYPE="10_um_res" BPM25801 : MONI, TYPE="10_um_res" BPM25901 : MONI, TYPE="10_um_res" BPM26201 : MONI, TYPE="10_um_res" BPM26301 : MONI, TYPE="10_um_res" BPM26401 : MONI, TYPE="10_um_res" BPM26501 : MONI, TYPE="10_um_res" BPM26601 : MONI, TYPE="10_um_res" BPM26701 : MONI, TYPE="10_um_res" BPM26801 : MONI, TYPE="10_um_res" BPM26901 : MONI, TYPE="10_um_res" BPM27201 : MONI, TYPE="10_um_res" BPM27301 : MONI, TYPE="10_um_res" BPM27401 : MONI, TYPE="10_um_res" BPM27501 : MONI, TYPE="10_um_res" BPM27601 : MONI, TYPE="10_um_res" BPM27701 : MONI, TYPE="10_um_res" BPM27801 : MONI, TYPE="10_um_res" BPM27901 : MONI, TYPE="10_um_res" BPM28201 : MONI, TYPE="10_um_res" BPM28301 : MONI, TYPE="10_um_res" BPM28401 : MONI, TYPE="10_um_res" BPM28501 : MONI, TYPE="10_um_res" BPM28601 : MONI, TYPE="10_um_res" BPM28701 : MONI, TYPE="10_um_res" BPM28801 : MONI, TYPE="10_um_res" BPM28901 : MONI, TYPE="10_um_res" BPM29201 : MONI, TYPE="10_um_res" BPM29301 : MONI, TYPE="10_um_res" BPM29401 : MONI, TYPE="10_um_res" BPM29501 : MONI, TYPE="10_um_res" BPM29601 : MONI, TYPE="10_um_res" BPM29701 : MONI, TYPE="10_um_res" BPM29801 : MONI, TYPE="10_um_res" BPM29901 : MONI, TYPE="10_um_res" BPM30201 : MONI, TYPE="10_um_res" BPM30301 : MONI, TYPE="10_um_res" BPM30401 : MONI, TYPE="10_um_res" BPM30501 : MONI, TYPE="10_um_res" BPM30601 : MONI, TYPE="10_um_res" BPM30701 : MONI, TYPE="10_um_res" BPM30801 : MONI, TYPE="10_um_res" ! ============================================================================== ! new BPMs ! ------------------------------------------------------------------------------ BPM2 : MONI, TYPE="25_um_res" BPM3 : MONI, TYPE="25_um_res" BPM5 : MONI, TYPE="25_um_res" BPM6 : MONI, TYPE="10_um_res" BPM8 : MONI, TYPE="10_um_res" BPM9 : MONI, TYPE="25_um_res" BPM10 : MONI, TYPE="25_um_res" BPM11 : MONI, TYPE="25_um_res" BPM12 : MONI, TYPE="25_um_res" BPM13 : MONI, TYPE="25_um_res" BPM14 : MONI, TYPE="25_um_res" BPM15 : MONI, TYPE="25_um_res" BPMA11 : MONI, TYPE="20_um_res" BPMA12 : MONI, TYPE="20_um_res" BPMS11 : MONI, TYPE="20_um_res" BPMM12 : MONI, TYPE="20_um_res" BPMM14 : MONI, TYPE="20_um_res" BPMS21 : MONI, TYPE="40_um_res" ! ============================================================================== ! miscellaneous ! ------------------------------------------------------------------------------ D10cma : DRIF, L=0.127 ! ------------------------------------------------------------------------------ RETURN