! *** OPTICS=AD_ACCEL-14APR2025s *** ! LCLS2sc A-line ! ============================================================================== ! Modification History ! ------------------------------------------------------------------------------ ! 14-MAR-2025, M. Woodley ! * remove BSYA_1 area components (decommissioned) ! * rename BSYA_2 area to BSYA; BSYA area begins at entrance to BRAM1 ! * define ESA area ! ------------------------------------------------------------------------------ ! 31-MAR-2024, M. Woodley ! * change Aline bend gap from 60 mm to 46 mm ! ------------------------------------------------------------------------------ ! 31-MAR-2024, M. Woodley ! * remove SCAPM2 (XCAPM2,YCAPM2) ! * add YCDAS19 0.397 m d/s of XCDAS19 ! * comment ALINEa and ALINEb LINE's as decommissioned (DASEL uses ALINEc) ! ------------------------------------------------------------------------------ ! 26-MAR-2019, M. Woodley ! * split BSYA area into two subareas, BSYA_1 and BSYA_2 ! ------------------------------------------------------------------------------ ! 31-OCT-2018, Y. Nosochkov ! * minor adjustment of DA04c drift length for DASEL with 25G kicker field ! 09-OCT-2018, M. Woodley ! * add YCBSYA per D. McCormick ! ------------------------------------------------------------------------------ ! 25-MAY-2018, M. Woodley ! * change name of E158 bends in ESA to avoid redefinitions ! ------------------------------------------------------------------------------ ! 07-FEB-2018, M. Woodley ! * add TYPE designations for A-line magnets ! 05-FEB-2018, Y. Nosochkov ! * minor optics rematch ! 25-JAN-2018, M. Woodley ! * remove PCBSY2/BTMBSY2 per A. Ibrahimov ! ------------------------------------------------------------------------------ ! 07-JUL-2017, Y. Nosochkov ! * minor optics rematch for LCLS-II-HE ! ------------------------------------------------------------------------------ ! 05-MAY-2017, M. Woodley ! * remove deferral designations ! * remove unused element definitions ! * pulsed correctors XCAPM2/YCAPM2 will be timed to affect the straight-ahead ! LTUH beam, but not the A-line beam ! * extend line to 3PR2 ! ------------------------------------------------------------------------------ ! 02-MAR-2017, M. Woodley ! * rename "SQ27.5" to SQ27p5 per G. White ! * expand BSYA area to include entire A-line (up to End Station wall) ! * add definitions for ABRDAS2 and TBRDAS2 (copied from DASEL.xsif) ! 24-FEB-2017, Y. Nosochkov ! * merge with A-line deck containing diagnostic + E158 (from M. Woodley) ! * rename rolled BKXAPM1-4 to BKRAPM1-4 (per naming convention) ! * rename rolled BXAM1 to BRAM1 (per naming convention) ! * remove ROLL4 S-rotation and replace it with BRAM1 tilt angle ! * update ROLL2 value ! * rename some parameters and drifts ! * update definition of 2-hole DUMPBSYA copper collimator using two separate ! collimators: for A-line (PCBSYA) and straight ahead BSY (PCBSYH) ! * move PCBSYA/PCBSYH (formerly DUMPBSYA) 1.35 m upstream (D. McCormick) ! * add deferred profile monitor PRBRAM1 and Cu target TGTBRAM1 upstream of ! BRAM1 (D. McCormick) ! * make the PRAPM profile monitor a YAG monitor (D. McCormick) and change ! name to YAGAPM ! * add deferred corrector package XCAPM2/YCAPM2 to the pulsed magnets ! (D. McCormick) ! * change deferment level of new A-line components from @3 to @1 ! ------------------------------------------------------------------------------ ! 02-NOV-2016, Y. Nosochkov ! * replace fast kicker/septum magnets with 120 Hz pulsed magnets (deferred) ! for ESTB (D. McCormick, J. Amann) ! * the pulsed magnets and other ESTB devices are not funded by LCLS-II (Paul) ! * update eng. type of BXAM1 from 1.0D38.37 to 2.0D38.37 (J. Amann) ! * move to baseline: PCBSY2, BTMBSY2 ! ------------------------------------------------------------------------------ ! 24-JUN-2016, Y. Nosochkov ! * add deferred BPMCUA between A-line kicker and septum ! * update the engineering type of BKYAL1,...,BKYAL5 kickers to ! "0.787K35.4" (J. Amann) ! ------------------------------------------------------------------------------ ! 26-FEB-2016, M. Woodley ! * remove SEQnn MARKers ! 26-FEB-2016, Y. Nosochkov ! * add BCS PCBSY2/BTMBSY2 at Z=3124 m (deferred @0) (S. Mao) ! * increase distance between kickers from 15 cm to 30 cm ! ------------------------------------------------------------------------------ ! 25-SEP-2015, Y. Nosochkov ! * update definitions of kickers and septum to allow zero angle ! 24-AUG-2015, Y. Nosochkov ! * update the TYPE of septum from 0.39SD38.98 to 0.625SD38.98 (J. Amann) ! * adjust quad strengths for match to the updated BSY optics ! * match geometry to the updated positions of A-line kicker & septum ! ------------------------------------------------------------------------------ ! 20-MAR-2015, M. Woodley ! * add SEQ21BEG, SEQ21END, BEGBSYA, ENDBSYA MARKERs ! 12-MAR-2015, Y. Nosochkov ! * add fast kickers and septum (as in spreader) to deflect beam into A-line ! * A-line optics based on original design per M. Woodley's deck ! ------------------------------------------------------------------------------ ! NOTE: ABRDAS2 and TBRDAS2 are defined in common.xsif ! ============================================================================== ! dipoles ! ------------------------------------------------------------------------------ ! A-line merge bend GBRAM1 := 50.8E-3 !2.0D38.37 gap height (m) SBRAM1 := 1.025 !2.0D38.37 straight length (m) ABRAM1 := 0.23261117109E-2 !bend angle (rad) LBRAM1 := SBRAM1*ABRAM1/(2*SIN(ABRAM1/2)) !path length (m) TBRAM1 := 0.014303788803 !bend roll (rad) BRAM1a : SBEN, TYPE="2.0D38.37", L=LBRAM1/2, ANGLE=ABRAM1/2, & E1=ABRAM1/2, E2=0, HGAP=GBRAM1/2, FINT=0.5, FINTX=0 , TILT=TBRAM1 BRAM1b : SBEN, TYPE="2.0D38.37", L=LBRAM1/2, ANGLE=ABRAM1/2, & E2=ABRAM1/2, E1=0, HGAP=GBRAM1/2, FINT=0, FINTX=0.5, TILT=TBRAM1 ! define unsplit SBENs for BMAD ... not used by MAD BRAM1 : SBEN, TYPE="2.0D38.37", HGAP=GBRAM1/2, L=LBRAM1, ANGLE=ABRAM1, & E1=ABRAM1/2, FINT=0.5, E2=ABRAM1/2, FINTX=0.5, & TILT=TBRAM1 ! A-bends AARC := -24*RADDEG !total arc bend angle (24 degrees) Nbend := 12 !number of arc bends !ABA := AARC/Nbend !nominal arc bend angle ABA := -1.999526617334*RADDEG !arc bend angle per Transport deck LBA := 3.024 GBA := 0.046 !50 GeV upgrade value B11a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B11b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B12a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B12b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B13a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B13b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B14a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B14b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B15a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B15b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B16a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B16b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B21a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B21b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B22a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B22b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B23a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B23b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B24a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B24b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B25a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B25b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" B26a : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E1=ABA/2, FINT=0.5, FINTX=0, & TYPE="Aline_bend" B26b : SBEN, L=LBA/2, HGAP=GBA/2, ANGLE=ABA/2, E2=ABA/2, FINT=0, FINTX=0.5, & TYPE="Aline_bend" ! define unsplit SBENs for BMAD ... not used by MAD B11 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B12 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B13 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B14 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B15 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B16 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B21 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B22 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B23 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B24 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B25 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 B26 : SBEN, TYPE="Aline_bend", HGAP=GBA/2, L=LBA, ANGLE=ABA, & E1=ABA/2, FINT=0.5, E2=ABA/2, FINTX=0.5 ! ESA bends (E158) LD1S := 1.83 LD2S := 3.45 LD3S := 3.45 AD1S := 0.022344631354 AD2S := -0.044690490267 AD3S := 0.022345239962 BXD1Sa : SBEN ,L=LD1S/2, ANGLE=AD1S/2, FINT=0, FINTX=0 BXD1Sb : SBEN ,L=LD1S/2, ANGLE=AD1S/2, FINT=0, FINTX=0 BXD2Sa : SBEN ,L=LD2S/2, ANGLE=AD2S/2, FINT=0, FINTX=0 BXD2Sb : SBEN ,L=LD2S/2, ANGLE=AD2S/2, FINT=0, FINTX=0 BXD3Sa : SBEN ,L=LD3S/2, ANGLE=AD3S/2, FINT=0, FINTX=0 BXD3Sb : SBEN ,L=LD3S/2, ANGLE=AD3S/2, FINT=0, FINTX=0 ! define unsplit SBENs for BMAD ... not used by MAD BXD1S : SBEN ,L=LD1S, ANGLE=AD1S, FINT=0, FINTX=0 BXD2S : SBEN ,L=LD2S, ANGLE=AD2S, FINT=0, FINTX=0 BXD3S : SBEN ,L=LD3S, ANGLE=AD3S, FINT=0, FINTX=0 ! ============================================================================== ! quadrupoles ! ------------------------------------------------------------------------------ LQ8cm := 2.0 rQ8cm := 0.08/2 LQ19 := 2.0 rQ19 := 0.186/2 LQ20 := 1.31318 rQ20 := 8.25*0.0254/2 LSQ := 0.55 rSQ := 0.08/2 ! the K-values below are for DASEL (the only connection to ALINE) KQ10 := 0.040946131243 KQ11 := -0.038135136057 KQ19 := 0.030837113549 KQ20 := 0.146624351215E-2 KQ27 := -0.083919622056 KQ28 := 0.03548040664 KQ30 := -0.028849559713 KQ38 := 0.034487458519 Q10 : QUAD, L=LQ8cm/2, APER=rQ8cm, K1=KQ10, TYPE="Aline_Q8cm" Q11 : QUAD, L=LQ8cm/2, APER=rQ8cm, K1=KQ11, TYPE="Aline_Q8cm" Q19 : QUAD, L=LQ19/2, APER=rQ19, K1=KQ19, TYPE="Aline_Q19" Q20 : QUAD, L=LQ20/2, APER=rQ20, K1=KQ20, TYPE="Aline_Q20" Q27 : QUAD, L=LQ8cm/2, APER=rQ8cm, K1=KQ27, TYPE="Aline_Q8cm" Q28 : QUAD, L=LQ8cm/2, APER=rQ8cm, K1=KQ28, TYPE="Aline_Q8cm" Q30 : QUAD, L=LQ8cm/2, APER=rQ8cm, K1=KQ30, TYPE="Aline_Q8cm" Q38 : QUAD, L=LQ8cm/2, APER=rQ8cm, K1=KQ38, TYPE="Aline_Q8cm" KSQ := 0.0 SQ27p5 : QUAD, L=LSQ/2, APER=rSQ, K1=KSQ, TILT, TYPE="Aline_SQ27" ! ESA quads (E158) LQSA := 1.327 rQSA := 193.0e-3 ! E158 run value (P. Bosted) KQ1SA := 0.016723215505 KQ2SA := -0.031838409505 KQ3SA := 0.031838409505 KQ4SA := -0.016080013116 Q1S : QUAD, L=LQSA/2, K1=KQ1SA, APER=rQSA Q2S : QUAD, L=LQSA/2, K1=KQ2SA, APER=rQSA Q3S : QUAD, L=LQSA/2, K1=KQ3SA, APER=rQSA Q4S : QUAD, L=LQSA/2, K1=KQ4SA, APER=rQSA ! ============================================================================== ! drifts ! ------------------------------------------------------------------------------ DAMQ10 : DRIF, L=0.9875 D105 : DRIF, L=5.5372 D106 : DRIF, L=0.727 D107 : DRIF, L=0.7755 D108 : DRIF, L=3.84839 D109 : DRIF, L=0.7755 D110 : DRIF, L=3.84839 D111 : DRIF, L=0.7755 D112 : DRIF, L=15.74899 D113 : DRIF, L=9.0997 D114 : DRIF, L=5.94572 D115 : DRIF, L=0.7755 D116 : DRIF, L=3.84839 D117 : DRIF, L=0.7755 D118 : DRIF, L=3.84839 D119 : DRIF, L=0.7755 D120 : DRIF, L=1.744768 !1.74477 D121 : DRIF, L=1.525 D122 : DRIF, L=1.925 D123 : DRIF, L=38.1116 D124 : DRIF, L=21.4778 D125 : DRIF, L=5.04065 DPR2 : DRIF, L=12.25174 !wall to 3PR2 in ESA alcove D201 : DRIF, L=20.44174-DPR2[L] D202 : DRIF, L=2.5 D203 : DRIF, L=1.69 D204 : DRIF, L=1.4865 D205 : DRIF, L=1.413 D206 : DRIF, L=2.603 D207 : DRIF, L=1.013 D208 : DRIF, L=31.04932 D209 : DRIF, L=92.118 ! drifts for diagnostic and correction devices comment D002a : DRIF, L=0.090479 D002b : DRIF, L=1.654993 D002c : DRIF, L=0.0184 D002d : DRIF, L=2.466807 D002e : DRIF, L=0.34925 D002f : DRIF, L=4.3434 D002g : DRIF, L=6.213125 D002h : DRIF, L=0.3429 D002i : DRIF, L=0.447449 D003a : DRIF, L=0.128016 D003b : DRIF, L=1.609344 D003c : DRIF, L=0.331248 D003d : DRIF, L=0.628073 D003e : DRIF, L=0.2286 D003f : DRIF, L=0.4826 D003g : DRIF, L=0.3556 D003h : DRIF, L=0.415546 D004a : DRIF, L=0.204216 D004b : DRIF, L=0.581559 D005a : DRIF, L=0.762 D005b : DRIF, L=2.329 D005c : DRIF, L=5.402548 D101a : DRIF, L=7.405675 D101b : DRIF, L=3.2853 D101c : DRIF, L=0.635 D101d : DRIF, L=0.787 D101e : DRIF, L=0.534 D101f : DRIF, L=0.813 D101g : DRIF, L=0.685 D101h : DRIF, L=0.61 D101i : DRIF, L=1.27 D101j : DRIF, L=1.778 D101k : DRIF, L=0.457 D101l : DRIF, L=0.153 D101m : DRIF, L=0.177 D101n : DRIF, L=0.483 D101o : DRIF, L=0.483 D101p : DRIF, L=0.587 PMV : DRIF, L=0.4 D101q : DRIF, L=0.589942 D102a : DRIF, L=1.06296 PM : DRIF, L=7.0 D102b : DRIF, L=1.06296 D103a : DRIF, L=66.20934 D103b : DRIF, L=0.615959 D103c : DRIF, L=2.850589 D103d : DRIF, L=0.15875 endcomment D105a : DRIF, L=0.808 D105b : DRIF, L=0.38 D105c : DRIF, L=0.478 D105d : DRIF, L=0.628 D105e : DRIF, L=0.684 D105f : DRIF, L=0.62 D105g : DRIF, L=0.88 D105h : DRIF, L=0.668 D105i : DRIF, L=0.3912 D108a : DRIF, L=0.829 D108b : DRIF, L=0.785 D108c : DRIF, L=2.23439 D110a : DRIF, L=2.98539 D110b : DRIF, L=0.863 D112a : DRIF, L=7.4348 D112b : DRIF, L=3.19319 D112c : DRIF, L=1.159 D112d : DRIF, L=1.302 D112e : DRIF, L=1.264 D112f : DRIF, L=0.723 D112g : DRIF, L=0.673 D113a : DRIF, L=1.32 D113b : DRIF, L=1.981 D113c : DRIF, L=5.7987 D114a : DRIF, L=4.47 D114b : DRIF, L=0.775 D114c : DRIF, L=0.70072 D116a : DRIF, L=2.81239 D116b : DRIF, L=1.036 D118a : DRIF, L=0.65139 D118b : DRIF, L=0.707 D118c : DRIF, L=1.131 D118d : DRIF, L=0.501 D118e : DRIF, L=0.858 D120b : DRIF, L=0.35 D120c : DRIF, L=0.513 D120a : DRIF, L=D120[L]-D120b[L]-D120c[L] !0.881768 D123a : DRIF, L=0.655 D123b : DRIF, L=0.673 D123c : DRIF, L=0.644 D123d : DRIF, L=0.657 D123e : DRIF, L=0.816 D123f : DRIF, L=0.445 D123g : DRIF, L=0.844 D123h : DRIF, L=31.9656 D123i : DRIF, L=0.729 D123j : DRIF, L=0.683 D124a : DRIF, L=0.629 D124b : DRIF, L=0.381 D124c : DRIF, L=0.635 D124d : DRIF, L=0.559 D124e : DRIF, L=1.041 D124f : DRIF, L=16.5857 D124g : DRIF, L=1.6471 ! ============================================================================== ! coordinate rolls ... bend plane rotated to remove linac slope ! ------------------------------------------------------------------------------ ROLLON := 1.0 ! original A-line values !ROLL1 : SROT, ANGLE= 0.014303845885 * ROLLON !ROLL2 : SROT, ANGLE=-0.393462907527E-2 * ROLLON !ROLL3 : SROT, ANGLE=-0.011395368282 * ROLLON ! new values !ROLL4 : SROT, ANGLE= 0.014303788803 * ROLLON !ROLL2 : SROT, ANGLE=-0.399639784046E-2 * ROLLON !ROLL3 : SROT, ANGLE= 0.0 * ROLLON !no ROLL3 per alignment group ROLL2 : SROT, ANGLE=(0.014303788803-0.399639784046E-2) * ROLLON ROLL3 : SROT, ANGLE= 0.0 * ROLLON !no ROLL3 per alignment group ! ============================================================================== ! XCORs and YCORs ! ------------------------------------------------------------------------------ A28X : HKIC A32X : HKIC A10Y : VKIC A18Y : VKIC A29Y : VKIC A33Y : VKIC ! ============================================================================== ! BPMs ! ------------------------------------------------------------------------------ ! rename BPM10 and BPM12 to avoid conflicts BPM10A : MONI BPM12A : MONI BPM17 : MONI BPM24 : MONI BPM28 : MONI BPM31 : MONI BPM32 : MONI ! ============================================================================== ! profile monitors, wire scanners, wire arrays, synchrotron light ports, ! spectrum foils, burn-through monitors, and Cu-target ! ------------------------------------------------------------------------------ PR10 : PROF SYNC : INST PR18 : PROF SP18 : INST PR20 : PROF PR28 : PROF PR33 : PROF ! ============================================================================== ! toroids and beam charge monitors ! ------------------------------------------------------------------------------ I10 : IMON I11 : IMON I24 : IMON I28 : IMON I29 : IMON ! ============================================================================== ! collimators and slits ! ------------------------------------------------------------------------------ PC10 : ECOL PC12 : ECOL PC14 : ECOL PC17 : ECOL SL19 : RCOL SL10 : RCOL PC20 : ECOL PC24 : ECOL C24 : RCOL PC26 : ECOL PC29 : ECOL C37 : RCOL ! ============================================================================== ! vacuum components ! ------------------------------------------------------------------------------ IV10 : MARK FV10 : MARK IV26 : MARK FV28 : MARK ! ============================================================================== ! points of interest ! ------------------------------------------------------------------------------ BEGB : MARK !start of A-line bending ST22 : MARK !beam stopper MARC : MARK !match point ENDB : MARK !end of A-line bending (final emittance) ST29 : MARK !beam stopper ALWALL : MARK !upstream face of wall that separates A-line tunnel from alcove ESAE : MARK !east wall of ESA BMDE : MARK !Beam Dump East ! ============================================================================== ! beamlines ! ------------------------------------------------------------------------------ BRAM1_full : LINE=(BRAM1a,BRAM1b) B11_full : LINE=(B11a,B11b) B12_full : LINE=(B12a,B12b) B13_full : LINE=(B13a,B13b) B14_full : LINE=(B14a,B14b) B15_full : LINE=(B15a,B15b) B16_full : LINE=(B16a,B16b) B21_full : LINE=(B21a,B21b) B22_full : LINE=(B22a,B22b) B23_full : LINE=(B23a,B23b) B24_full : LINE=(B24a,B24b) B25_full : LINE=(B25a,B25b) B26_full : LINE=(B26a,B26b) BXD1S_full : LINE=(BXD1Sa,BXD1Sb) BXD2S_full : LINE=(BXD2Sa,BXD2Sb) BXD3S_full : LINE=(BXD3Sa,BXD3Sb) Q10_full : LINE=(Q10,Q10) Q11_full : LINE=(Q11,Q11) Q19_full : LINE=(Q19,Q19) Q20_full : LINE=(Q20,Q20) Q27_full : LINE=(Q27,Q27) SQ27p5_full : LINE=(SQ27p5,SQ27p5) Q28_full : LINE=(Q28,Q28) Q30_full : LINE=(Q30,Q30) Q38_full : LINE=(Q38,Q38) Q1S_full : LINE=(Q1S,Q1S) Q2S_full : LINE=(Q2S,Q2S) Q3S_full : LINE=(Q3S,Q3S) Q4S_full : LINE=(Q4S,Q4S) LD105 : LINE=(& D105a,PC10,D105b,IV10,D105c,FV10,D105d,BPM10A,D105e,I10,D105f,PR10,D105g,& A10Y,D105h,I11,D105i) LD108 : LINE=(D108a,PC12,D108b,BPM12A,D108c) LD110 : LINE=(D110a,PC14,D110b) LD112 : LINE=(& D112a,SYNC,D112b,PC17,D112c,BPM17,D112d,A18Y,D112e,PR18,D112f,SP18,D112g) LD113 : LINE=(D113a,SL19,D113b,SL10,D113c) LD114 : LINE=(D114a,PC20,D114b,PR20,D114c) LD116 : LINE=(D116a,ST22,D116b) LD118 : LINE=(D118a,PC24,D118b,BPM24,D118c,I24,D118d,C24,D118e) LD120 : LINE=(D120a,PC26,D120b,IV26,D120c) LD123 : LINE=(& D123a,FV28,D123b,BPM28,D123c,I28,D123d,PR28,D123e,A28X,D123f,A29Y,D123g,& ST29,D123h,PC29,D123i,I29,D123j) LD124 : LINE=(& D124a,A32X,D124b,A33Y,D124c,BPM31,D124d,BPM32,D124e,PR33,D124f,C37,D124g) ! A-line BSYA : LINE=(BEGBSYA,& BRAM1_full,ROLL2,DAMQ10,& Q10_full,LD105,& Q11_full,D106,& BEGB,& B11_full,D107,& B12_full,LD108,& B13_full,D109,& B14_full,LD110,& B15_full,D111,& B16_full,LD112,& Q19_full,LD113,& Q20_full,LD114,& B21_full,D115,& B22_full,LD116,& B23_full,D117,& B24_full,LD118,& B25_full,D119,& B26_full,MARC,ROLL3,& ENDB,LD120,& Q27_full,D121,& SQ27p5_full,D122,& Q28_full,LD123,& Q30_full,LD124,& Q38_full,D125,ALWALL,DPR2,& ENDBSYA) ! End Station A ESA : LINE=(BEGESA,D201,& BXD1S_full,D202,& BXD2S_full,D203,& BXD3S_full,D204,& Q1S_full,D205,& Q2S_full,D206,& Q3S_full,D207,& Q4S_full,D208,& ESAE,D209,BMDE,& ENDESA) ALINE : LINE=(BSYA,ESA) ! ------------------------------------------------------------------------------ RETURN