FLASSI. ECHO stream rerouted to file: LCLS2cu.echo FLASSI. PRINT stream rerouted to file: LCLS2cu.print FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: common.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: SPRD.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: CUSXR.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: ALINE.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: BYP.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: LTU.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: UND.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: SFT.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: HXTES.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: LCLS2cu.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: LCLS_L1.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: LCLS_L2.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: LCLS_L3.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: BSYcu.xsif FLCALL. Now reading file: LCLS2cu_master.xsif FLCALL. Now reading file: standard input ENBEAM. ## Warning ## Redundant data on BEAM --- SIGE will be ignored. ! ------------------------------------------------------------------------------ 330 !CALL, FILENAME="LCLS2cu_match.mad8" !CALL, FILENAME="LCLS2cu_XLEAP.mad8" !CALL, FILENAME="RDB/LCLS2cu_makeSymbols.mad8" !CALL, FILENAME="elegant/LCLS2cu_makeElegant.mad8" !use LCLS_L*e.xsif 335 !STOP ! ------------------------------------------------------------------------------ ! SURVEY in linac coordinates 340 ! ------------------------------------------------------------------------------ ! HXR !COMMENT 345 ASSIGN, PRINT="LCLS2cuH.print" FLASSI. Closing PRINT file: LCLS2cu.print FLASSI. PRINT stream rerouted to file: LCLS2cuH.print BEAM, ENERGY=E00 SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF SETK2cuH USE, CU_HXR ENUSE. New beam line expanded: CU_HXR 350 !SAVELINE, NAME="CU_HXR", FILENAME="LCLS2cuH.saveline" PRINT, FULL SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuH_survey.tape" SURVEY. Output written on file: LCLS2cuH_survey.tape SAVEBETA, TWm, OTR2 TWISS, SAVE, BETA0=TWSSC, TAPE="LCLS2cuH_twiss.tape" !, & TWSBET. ## Warning ## Chromatic functions in BETA0 are zero. Use CHROM option to get non-zero values. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2cuH_twiss.tape TWBTSV. Lattice functions saved in table: TWISS 355 ! RTAPE="LCLS2cuH_rmat.tape" SHOW, TWm Command: TWM TWM: BETA0, BETX=1.11308102615, ALFX=-0.068940358788, MUX=0.764740028848, & BETY=1.113021659127, ALFY=-0.070294897537, MUY=0.939780945585, X=& -0.366492701245E-28, PX=0.262131486507E-28, Y=0.0, PY=0.0, T=& -0.474899557998E-20, PT=0.236884656986E-17, DX=-0.343149125729E-11, DPX=& -0.815900897306E-12, DY=0.0, DPY=0.0, RM11=0.0, RM12=0.0, RM21=0.0, RM22=0.0& , ENERGY=0.135 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=X,Y, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACE, FILE="LCLS2cuH", & TITLE="Cu-linac to HXR dump" 360 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=9, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACE, FILE="LCLS2cuH", & TITLE="Cu-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACE, FILE="LCLS2cuH", & 365 TITLE="Cu-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACE, FILE="LCLS2cuH", & TITLE="Cu-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 370 STYLE=100, SPLINE, RANGE=WS31/DU7H[25], FILE="LCLS2cuH", & TITLE="UNDH (Cu beam, 8 GeV)" !ENDCOMMENT ! ------------------------------------------------------------------------------ 375 ! HXR safety dump COMMENT ASSIGN, PRINT="LCLS2cuHS.print" 380 BEAM, ENERGY=E00 SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF SETK2cuH USE, CU_SFTH PRINT, FULL 385 SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuHS_survey.tape" ENDCOMMENT ! ------------------------------------------------------------------------------ 390 ! HXR XTES !COMMENT ASSIGN, PRINT="LCLS2cuHXTES.print" FLASSI. Closing PRINT file: LCLS2cuH.print FLASSI. PRINT stream rerouted to file: LCLS2cuHXTES.print BEAM, ENERGY=E00 395 SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF SETK2cuH USE, CU_HXTES ENUSE. New beam line expanded: CU_HXTES PRINT, FULL SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuHXTES_survey.tape" SURVEY. Output written on file: LCLS2cuHXTES_survey.tape 400 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! HXR TXI 405 !COMMENT ASSIGN, PRINT="LCLS2cuHTXI.print" FLASSI. Closing PRINT file: LCLS2cuHXTES.print FLASSI. PRINT stream rerouted to file: LCLS2cuHTXI.print BEAM, ENERGY=E00 SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF 410 SETK2cuH USE, CU_HTXI ENUSE. New beam line expanded: CU_HTXI PRINT, FULL SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuHTXI_survey.tape" SURVEY. Output written on file: LCLS2cuHTXI_survey.tape !ENDCOMMENT 415 ! ------------------------------------------------------------------------------ ! SXR 420 !COMMENT ASSIGN, PRINT="LCLS2cuS.print" FLASSI. Closing PRINT file: LCLS2cuHTXI.print FLASSI. PRINT stream rerouted to file: LCLS2cuS.print BEAM, ENERGY=E00 SET, SETCUS, CUSON !pulsed !SET, SETCUS, CUSONDC !DC 425 !VALUE, PULSED,DCMODE SETK2cuS USE, CU_SXR ENUSE. New beam line expanded: CU_SXR !SAVELINE, NAME="CU_SXR", FILENAME="LCLS2cuS.saveline" PRINT, FULL 430 SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuS_survey.tape" SURVEY. Output written on file: LCLS2cuS_survey.tape TWISS, SAVE, BETA0=TWSSC, TAPE="LCLS2cuS_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2cuS_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2cuS_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cuS", & 435 TITLE="Cu-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cuS", & TITLE="Cu-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & 440 STYLE=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cuS", & TITLE="Cu-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=VBOUTB/DU7S[31], FILE="LCLS2cuS", & TITLE="UNDS (Cu beam, 8 GeV)" 445 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! A-line 450 !COMMENT ASSIGN, PRINT="LCLS2cuA.print" FLASSI. Closing PRINT file: LCLS2cuS.print FLASSI. PRINT stream rerouted to file: LCLS2cuA.print BEAM, ENERGY=E00 SET, SETCUS, CUSOFF ; SET, SETAL, ALON 455 SETK2cuA USE, CU_ALINE ENUSE. New beam line expanded: CU_ALINE !SAVELINE, NAME="CU_ALINE", FILENAME="LCLS2cuA.saveline" PRINT, FULL SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuA_survey.tape" SURVEY. Output written on file: LCLS2cuA_survey.tape 460 TWISS, SAVE, BETA0=TWSSC, TAPE="LCLS2cuA_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2cuA_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2cuA_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/ENDBSYA_2, FILE="LCLS2cuA", & TITLE="Cu-linac to A-line" 465 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=rBETX,rBETY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/ENDBSYA_2, FILE="LCLS2cuA", & TITLE="Cu-linac to A-line" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEGDL1_1/ENDBSYA_2, FILE="LCLS2cuA", & 470 TITLE="Cu-linac to A-line" !ENDCOMMENT ! ------------------------------------------------------------------------------ 475 ! 6 MeV gun spectrometer COMMENT ASSIGN, PRINT="LCLS2cuGSPEC.print" BEAM, ENERGY=E00 480 USE, CU_GSPEC !SAVELINE, NAME="CU_GSPEC", FILENAME="LCLS2cuGSPEC.saveline" PRINT, FULL SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuGSPEC_survey.tape" TWISS, SAVE, BETA0=TWSSC, TAPE="LCLS2cuGSPEC_twiss.tape" !, & 485 ! RTAPE="LCLS2cuGSPEC_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & STYLE=100, SPLINE, RANGE=BEGGUN/ENDGSPEC, FILE="LCLS2cuGSPEC", & TITLE="Cathode to 6-MeV Gun Spectrometer" ENDCOMMENT 490 ! ------------------------------------------------------------------------------ ! 135 MeV spectrometer 495 COMMENT ASSIGN, PRINT="LCLS2cuSPEC.print" BEAM, ENERGY=E00 USE, CU_SPEC !SAVELINE, NAME="CU_SPEC", FILENAME="LCLS2cuSPEC.saveline" 500 PRINT, FULL SURVEY, THETA0=ADL1, X0=Xi, Z0=Zi, TAPE="LCLS2cuSPEC_survey.tape" TWISS, SAVE, BETA0=TWSSC, TAPE="LCLS2cuSPEC_twiss.tape" !, & ! RTAPE="LCLS2cuSPEC_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & 505 STYLE=100, SPLINE, RANGE=BEGGUN/ENDSPEC, FILE="LCLS2cuSPEC", & TITLE="Cathode to 135-MeV Spectrometer" ENDCOMMENT ! ------------------------------------------------------------------------------ 510 ! SURVEY in BSY coordinates (from end of L3) ! ------------------------------------------------------------------------------ ! HXR 515 !COMMENT ASSIGN, PRINT="BSY-LCLS2cuH.print" FLASSI. Closing PRINT file: LCLS2cuA.print FLASSI. PRINT stream rerouted to file: BSY-LCLS2cuH.print BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF SETK2cuH 520 USE, BSYLTUH ENUSE. New beam line expanded: BSYLTUH PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuH_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuH_survey.tape !ENDCOMMENT 525 ! ------------------------------------------------------------------------------ ! HXR safety dump 530 !COMMENT ASSIGN, PRINT="BSY-LCLS2cuHS.print" FLASSI. Closing PRINT file: BSY-LCLS2cuH.print BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF SETK2cuH 535 USE, BSYLTUHS ENUSE. New beam line expanded: BSYLTUHS PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuHS_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuHS_survey.tape !ENDCOMMENT 540 ! ------------------------------------------------------------------------------ ! HXR XTES 545 !COMMENT ASSIGN, PRINT="BSY-LCLS2cuHXTES.print" FLASSI. Closing PRINT file: BSY-LCLS2cuHS.print BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF USE, BSYLTUHXTES ENUSE. New beam line expanded: BSYLTUHXTES 550 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuHXTES_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuHXTES_survey.tape !ENDCOMMENT 555 ! ------------------------------------------------------------------------------ ! HXR TXI !COMMENT 560 ASSIGN, PRINT="BSY-LCLS2cuHTXI.print" FLASSI. Closing PRINT file: BSY-LCLS2cuHXTES.print BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF USE, BSYLTUHTXI ENUSE. New beam line expanded: BSYLTUHTXI PRINT, FULL 565 SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuHTXI_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuHTXI_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 570 ! SXR !COMMENT ASSIGN, PRINT="BSY-LCLS2cuS.print" FLASSI. Closing PRINT file: BSY-LCLS2cuHTXI.print 575 BEAM, ENERGY=Ef SET, SETCUS, CUSON !pulsed !SET, SETCUS, CUSONDC !DC !VALUE, PULSED,DCMODE SETK2cuS 580 USE, BSYLTUS ENUSE. New beam line expanded: BSYLTUS PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuS_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuS_survey.tape !ENDCOMMENT 585 ! ------------------------------------------------------------------------------ ! A-line 590 !COMMENT ASSIGN, PRINT="BSY-LCLS2cuA.print" FLASSI. Closing PRINT file: BSY-LCLS2cuS.print BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALON SETK2cuA 595 USE, BSYALINE ENUSE. New beam line expanded: BSYALINE PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2cuA_survey.tape" SURVEY. Output written on file: BSY-LCLS2cuA_survey.tape !ENDCOMMENT 600 ! ------------------------------------------------------------------------------ ! S100 to A-line ("A-line BSY" coordinates from Transport deck) ! Note: the "A-line BSY" coordinates differ from the LCLS BSY coordinates 605 COMMENT ASSIGN, PRINT="BSYA-LCLS1cuA.print" BEAM, ENERGY=Ef SET, SETCUS, CUSOFF ; SET, SETAL, ALON 610 SETK2cuA USE, S100ALINE PRINT, FULL SURVEY, Y0=77.643643677513, PHI0=-0.00475999999158308164 ENDCOMMENT 615 ! ============================================================================== ! Twiss plots 620 !COMMENT ASSIGN, PRINT="LCLS2cu.print" FLASSI. Closing PRINT file: BSY-LCLS2cuA.print ! Cathode to HXR Main Dump 625 BEAM, ENERGY=E00 SET, SETCUS, CUSOFF ; SET, SETAL, ALOFF SETK2cuH USE, CU_HXR ENUSE. Beam line re-expanded: CU_HXR PRINT, FULL 630 TWISS, SAVE, BETA0=TWSSC TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, & COLOUR=100, RANGE=BEGDL1_1/DUMPFACE, FILE="LCLS2cu_color", & TITLE="Cu_linac: DL1 to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 635 COLOUR=100, SPLINE, RANGE=BEGDL1_1/DUMPFACE, FILE="LCLS2cu_color", & TITLE="Cu_linac: DL1 to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDL1_1/DUMPFACE, FILE="LCLS2cu_color", & TITLE="Cu_linac: DL1 to HXR dump" 640 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, RANGE=BEGGUN/ENDL0, FILE="LCLS2cu_color", & TITLE="Cu_linac: Gun + L0 linac" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & COLOUR=100, SPLINE, RANGE=LHbeg/LHend, FILE="LCLS2cu_color", & 645 TITLE="Cu_linac: Laser Heater chicane" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & COLOUR=100, SPLINE, RANGE=L0bBEG/ENDDL1_2, FILE="LCLS2cu_color", & TITLE="Cu_linac: L0b + DL1 dogleg" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 650 COLOUR=100, SPLINE, RANGE=BEGL1/ENDL1, FILE="LCLS2cu_color", & TITLE="Cu_linac: L1 linac" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & COLOUR=100, SPLINE, RANGE=BEGBC1/ENDBC1, FILE="LCLS2cu_color", & TITLE="Cu_linac: BC1 chicane" 655 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGL2/ENDL2, FILE="LCLS2cu_color", & TITLE="Cu_linac: L2 linac" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX, & COLOUR=100, SPLINE, RANGE=BEGBC2/ENDBC2, FILE="LCLS2cu_color", & 660 TITLE="Cu_linac: BC2 chicane" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGL3/ENDL3, FILE="LCLS2cu_color", & TITLE="Cu_linac: L3 linac" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 665 COLOUR=100, SPLINE, RANGE=BEGCLTH_0/ENDBSYH_2, FILE="LCLS2cu_color", & TITLE="Cu_linac: BSY to LTUH" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGLTUH/ENDLTUH, FILE="LCLS2cu_color", & TITLE="Cu_linac: LTUH" 670 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGUNDH/ENDUNDH, FILE="LCLS2cu_color", & TITLE="Cu_linac: HXR Undulator" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDMPH_1/DUMPFACE, FILE="LCLS2cu_color", & 675 TITLE="Cu_linac: HXR Post-undulator to dump" ! Cathode to HXR Safety Dump BEAM, ENERGY=E00 680 USE, CU_SFTH ENUSE. New beam line expanded: CU_SFTH TWISS, SAVE, BETA0=TWSSC TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGSFTH_1/SFTDUMP, FILE="LCLS2cu_color", & TITLE="Cu_linac: HXR safety dump" 685 ! Cathode to SXR Main Dump BEAM, ENERGY=E00 SET, SETCUS, CUSON !pulsed 690 !SET, SETCUS, CUSONDC !DC !VALUE, PULSED,DCMODE SETK2cuS USE, CU_SXR ENUSE. Beam line re-expanded: CU_SXR !SAVELINE, NAME="CU_SXR", FILENAME="LCLS2cuS.saveline" 695 PRINT, FULL TWISS, SAVE, BETA0=TWSSC TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, & COLOUR=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cu_color", & TITLE="Cu_linac: DL1 to SXR dump" 700 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cu_color", & TITLE="Cu_linac: DL1 to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDL1_1/DUMPFACEB, FILE="LCLS2cu_color", & 705 TITLE="Cu_linac: DL1 to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGCLTH_0/ENDBSYS, FILE="LCLS2cu_color", & TITLE="Cu_linac: BSY to LTUS" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & 710 COLOUR=100, SPLINE, RANGE=BEGLTUS/ENDLTUS, FILE="LCLS2cu_color", & TITLE="Cu_linac: LTUS" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGUNDS/ENDUNDS, FILE="LCLS2cu_color", & TITLE="Cu_linac: SXR Undulator" 715 PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDMPS_1/DUMPFACEb, FILE="LCLS2cu_color", & TITLE="Cu_linac: SXR Post-indulator to dump" ! Cathode to A-line 720 BEAM, ENERGY=E00 SET, SETCUS, CUSOFF ; SET, SETAL, ALON SETK2cuA USE, CU_ALINE ENUSE. Beam line re-expanded: CU_ALINE 725 TWISS, SAVE, BETA0=TWSSC TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=rBETX,rBETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGCLTH_0/ENDBSYA_2, FILE="LCLS2cu_color", & TITLE="Cu_linac: BSY to A-line" !ENDCOMMENT 730 ! ------------------------------------------------------------------------------ !CALL, FILENAME="LCLS2cu_area_plots.mad8" 735 ! ------------------------------------------------------------------------------ STOP ZEND. 22 Warning messages, 0 Error messages. MAD terminated on 20/10/23 at 13.56.27 MZEND. Usage statistics for 1 dynamic stores. Map of store 0 / / ------------------------ Division Number of times Kind Max-size Garb-coll. Mode Position used allowed Wiped user auto Pushd Redcd 1 QDIV1 0 1 9 93316 56000006 36 0 0 68 0 2 QDIV2 1 1 55999606 3996332 56000006 0 0 0 0 0 20 system 1 8 56000006 111 56000006 0 0 0 0 0