FLASSI. ECHO stream rerouted to file: LCLS2sc.echo FLASSI. PRINT stream rerouted to file: LCLS2sc.print FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: common.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: CM.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: DIAG0.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: INJ.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BC1.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BC2.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: EXT.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: DLBM.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: SPRD.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: CUSXR.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: ALINE.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BYP.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: LTU.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: UND.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: SFT.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: SXTES.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: DASEL.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BSYsc.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: standard input ENBEAM. ## Warning ## Redundant data on BEAM --- SIGE will be ignored. ! ------------------------------------------------------------------------------ 510 !CALL, FILENAME="LCLS2sc_beams.mad8" !alternate beams & configurations !CALL, FILENAME="LCLS2sc_match.mad8" !CALL, FILENAME="LCLS2sc_XLEAP.mad8" !CALL, FILENAME="RDB/LCLS2sc_makeSymbols.mad8" !CALL, FILENAME="elegant/LCLS2sc_makeElegant.mad8" 515 !STOP ! ------------------------------------------------------------------------------ ! SURVEY in linac coordinates 520 ! ------------------------------------------------------------------------------ ! EIC (Early Injector Commissioning) COMMENT 525 ASSIGN, PRINT="EIC.print" BEAM, ENERGY=E0 USE, SC_EIC PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun 530 TWISS, COUPLE, BETA0=TWSS0, TAPE="EIC_twiss.tape", RTAPE="EIC_rmat.tape" ENDCOMMENT ! ------------------------------------------------------------------------------ 535 ! SXR !COMMENT ASSIGN, PRINT="LCLS2scS.print" FLASSI. Closing PRINT file: LCLS2sc.print FLASSI. PRINT stream rerouted to file: LCLS2scS.print BEAM, ENERGY=E0 540 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SXR ENUSE. New beam line expanded: SC_SXR !SAVELINE, NAME="SC_SXR", FILENAME="LCLS2scS.saveline" PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scS_survey.tape" SURVEY. Output written on file: LCLS2scS_survey.tape 545 BEAM, ENERGY=Ei USE, SC_SXRi ENUSE. New beam line expanded: SC_SXRI PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scS_twiss.tape" !, & TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scS_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2scS_rmat.tape" 550 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACEB, FILE="LCLS2scS", & TITLE="SC-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACEB, FILE="LCLS2scS", & 555 TITLE="SC-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACEB, FILE="LCLS2scS", & TITLE="SC-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 560 STYLE=100, SPLINE, RANGE=WS31B/DU7S[31], FILE="LCLS2scS", & TITLE="UNDS (SC beam, 4 GeV)" !ENDCOMMENT ! ------------------------------------------------------------------------------ 565 ! SXR safety dump COMMENT ASSIGN, PRINT="LCLS2scSS.print" 570 BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SFTS PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scSS_survey.tape" 575 ENDCOMMENT ! ------------------------------------------------------------------------------ ! SXR "2.x" 580 !COMMENT ASSIGN, PRINT="LCLS2scS2_X.print" FLASSI. Closing PRINT file: LCLS2scS.print FLASSI. PRINT stream rerouted to file: LCLS2scS2_X.print BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF 585 USE, SC_S2_X ENUSE. New beam line expanded: SC_S2_X PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scS2_X_survey.tape" SURVEY. Output written on file: LCLS2scS2_X_survey.tape !ENDCOMMENT 590 ! ------------------------------------------------------------------------------ ! SXR TXI !COMMENT 595 ASSIGN, PRINT="LCLS2scSTXI.print" FLASSI. Closing PRINT file: LCLS2scS2_X.print FLASSI. PRINT stream rerouted to file: LCLS2scSTXI.print BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_STXI ENUSE. New beam line expanded: SC_STXI PRINT, FULL 600 SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scSTXI_survey.tape" SURVEY. Output written on file: LCLS2scSTXI_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 605 ! SXR TMO !COMMENT ASSIGN, PRINT="LCLS2scSTMO.print" FLASSI. Closing PRINT file: LCLS2scSTXI.print FLASSI. PRINT stream rerouted to file: LCLS2scSTMO.print BEAM, ENERGY=E0 610 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_STMO ENUSE. New beam line expanded: SC_STMO PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scSTMO_survey.tape" SURVEY. Output written on file: LCLS2scSTMO_survey.tape !ENDCOMMENT 615 ! ------------------------------------------------------------------------------ ! HXR 620 !COMMENT ASSIGN, PRINT="LCLS2scH.print" FLASSI. Closing PRINT file: LCLS2scSTMO.print FLASSI. PRINT stream rerouted to file: LCLS2scH.print BEAM, ENERGY=E0 SET, SETSP, SETSPh ; SET, SETAL, ALOFF USE, SC_HXR ENUSE. New beam line expanded: SC_HXR 625 !SAVELINE, NAME="SC_HXR", FILENAME="LCLS2scH.saveline" PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scH_survey.tape" SURVEY. Output written on file: LCLS2scH_survey.tape BEAM, ENERGY=Ei USE, SC_HXRi ENUSE. New beam line expanded: SC_HXRI 630 PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scH_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scH_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2scH_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACE, FILE="LCLS2scH", & 635 TITLE="SC-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACE, FILE="LCLS2scH", & TITLE="SC-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & 640 STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACE, FILE="LCLS2scH", & TITLE="SC-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=WS31/DU7H[25], FILE="LCLS2scH", & TITLE="UNDH (SC beam, 4 GeV)" 645 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! BSY dump 650 !COMMENT ASSIGN, PRINT="LCLS2scD.print" FLASSI. Closing PRINT file: LCLS2scH.print BEAM, ENERGY=E0 SET, SETSP, SETSPd ; SET, SETDA, DAOFF 655 USE, SC_BSYD ENUSE. New beam line expanded: SC_BSYD !SAVELINE, NAME="SC_BSYD", FILENAME="LCLS2scD.saveline" PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scD_survey.tape" SURVEY. Output written on file: LCLS2scD_survey.tape BEAM, ENERGY=Ei 660 USE, SC_BSYDi ENUSE. New beam line expanded: SC_BSYDI PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scD_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scD_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2scD_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & 665 STYLE=100, SPLINE, RANGE=BEAM0/DUMPBSY, FILE="LCLS2scD", & TITLE="SC-linac to BSY dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPBSY, FILE="LCLS2scD", & TITLE="SC-linac to BSY dump" 670 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPBSY, FILE="LCLS2scD", & TITLE="SC-linac to BSY dump" !ENDCOMMENT 675 ! ------------------------------------------------------------------------------ ! DIAG0 !COMMENT 680 ASSIGN, PRINT="DIAG0.print" FLASSI. Closing PRINT file: LCLS2scD.print BEAM, ENERGY=E0 USE, SC_DIAG0 ENUSE. New beam line expanded: SC_DIAG0 !SAVELINE, NAME="SC_DIAG0", FILENAME="DIAG0.saveline" PRINT, FULL 685 SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="DIAG0_survey.tape" SURVEY. Output written on file: DIAG0_survey.tape BEAM, ENERGY=Ei USE, SC_DIAG0i ENUSE. New beam line expanded: SC_DIAG0I PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="DIAG0_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWISS. Lattice functions written on file: DIAG0_twiss.tape TWBTSV. Lattice functions saved in table: TWISS 690 ! RTAPE="DIAG0_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEAM0/ENDDIAG0, FILE="DIAG0", & TITLE="SC-linac to DIAG0" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & 695 STYLE=100, SPLINE, RANGE=BEAM0/ENDDIAG0, FILE="DIAG0", & TITLE="SC-linac to DIAG0" !ENDCOMMENT ! ------------------------------------------------------------------------------ 700 ! DASEL (funded off-project) !COMMENT ASSIGN, PRINT="LCLS2scDA.print" FLASSI. Closing PRINT file: DIAG0.print 705 BEAM, ENERGY=E0 SET, SETSP, SETSPd ; SET, SETDA, DAON ; SET, ROLLRC, +1 SETK2scDA USE, SC_DASEL ENUSE. New beam line expanded: SC_DASEL !SAVELINE, NAME="SC_DASEL", FILENAME="LCLS2scDA.saveline" 710 PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scDA_survey.tape" SURVEY. Output written on file: LCLS2scDA_survey.tape BEAM, ENERGY=Ei SET, ROLLRC, 0 USE, SC_DASELi ENUSE. New beam line expanded: SC_DASELI 715 PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scDA_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scDA_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2scDA_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & STYLE=100, SPLINE, RANGE=BEAM0/ENDBSYA_2, FILE="LCLS2scDA", & 720 TITLE="SC-linac to DASEL" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=rBETX,rBETY, & STYLE=100, SPLINE, RANGE=BEAM0/ENDBSYA_2, FILE="LCLS2scDA", & TITLE="SC-linac to DASEL" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & 725 STYLE=100, SPLINE, RANGE=BEAM0/ENDBSYA_2, FILE="LCLS2scDA", & TITLE="SC-linac to DASEL" SET, ROLLRC, +1 !ENDCOMMENT 730 ! ------------------------------------------------------------------------------ ! SURVEY in BSY coordinates (from start of spreader) ! ------------------------------------------------------------------------------ ! SXR 735 !COMMENT ASSIGN, PRINT="BSY-LCLS2scS.print" FLASSI. Closing PRINT file: LCLS2scDA.print BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF 740 USE, BSYLCLS2scS ENUSE. New beam line expanded: BSYLCLS2SCS PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scS_survey.tape" SURVEY. Output written on file: BSY-LCLS2scS_survey.tape !ENDCOMMENT 745 ! ------------------------------------------------------------------------------ ! SXR safety dump 750 !COMMENT ASSIGN, PRINT="BSY-LCLS2scSS.print" FLASSI. Closing PRINT file: BSY-LCLS2scS.print BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scSS ENUSE. New beam line expanded: BSYLCLS2SCSS 755 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scSS_survey.tape" SURVEY. Output written on file: BSY-LCLS2scSS_survey.tape !ENDCOMMENT 760 ! ------------------------------------------------------------------------------ ! SXR 2_X !"2.X" !COMMENT 765 ASSIGN, PRINT="BSY-LCLS2scS2_X.print" FLASSI. Closing PRINT file: BSY-LCLS2scSS.print BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scS2_X ENUSE. New beam line expanded: BSYLCLS2SCS2_X PRINT, FULL 770 SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scS2_X_survey.tape" SURVEY. Output written on file: BSY-LCLS2scS2_X_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 775 ! SXR TXI !COMMENT ASSIGN, PRINT="BSY-LCLS2scSTXI.print" FLASSI. Closing PRINT file: BSY-LCLS2scS2_X.print 780 BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scSTXI ENUSE. New beam line expanded: BSYLCLS2SCSTXI PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & 785 TAPE="BSY-LCLS2scSTXI_survey.tape" SURVEY. Output written on file: BSY-LCLS2scSTXI_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 790 ! SXR TMO !COMMENT ASSIGN, PRINT="BSY-LCLS2scSTMO.print" FLASSI. Closing PRINT file: BSY-LCLS2scSTXI.print BEAM, ENERGY=Ef 795 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scSTMO ENUSE. New beam line expanded: BSYLCLS2SCSTMO PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scSTMO_survey.tape" SURVEY. Output written on file: BSY-LCLS2scSTMO_survey.tape 800 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! HXR 805 !COMMENT ASSIGN, PRINT="BSY-LCLS2scH.print" FLASSI. Closing PRINT file: BSY-LCLS2scSTMO.print BEAM, ENERGY=Ef SET, SETSP, SETSPh ; SET, SETAL, ALOFF 810 USE, BSYLCLS2scH ENUSE. New beam line expanded: BSYLCLS2SCH PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scH_survey.tape" SURVEY. Output written on file: BSY-LCLS2scH_survey.tape !ENDCOMMENT 815 ! ------------------------------------------------------------------------------ ! BSY dump 820 !COMMENT ASSIGN, PRINT="BSY-LCLS2scD.print" FLASSI. Closing PRINT file: BSY-LCLS2scH.print BEAM, ENERGY=Ef SET, SETSP, SETSPd ; SET, SETDA, DAOFF USE, BSYLCLS2scD ENUSE. New beam line expanded: BSYLCLS2SCD 825 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scD_survey.tape" SURVEY. Output written on file: BSY-LCLS2scD_survey.tape !ENDCOMMENT 830 ! ------------------------------------------------------------------------------ ! S30XL (a.k.a. DASEL) !COMMENT 835 ASSIGN, PRINT="BSY-LCLS2scDA.print" FLASSI. Closing PRINT file: BSY-LCLS2scD.print BEAM, ENERGY=Ef SET, SETSP, SETSPd ; SET, SETDA, DAON ; SET, ROLLRC, +1 SETK2scDA USE, BSYLCLS2scDA ENUSE. New beam line expanded: BSYLCLS2SCDA 840 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scDA_survey.tape" SURVEY. Output written on file: BSY-LCLS2scDA_survey.tape !ENDCOMMENT 845 ! ============================================================================== ! Twiss plots !COMMENT 850 ASSIGN, PRINT="LCLS2sc.print" FLASSI. Closing PRINT file: BSY-LCLS2scDA.print ! Cathode to BEAM0 BEAM, ENERGY=E0 855 USE, (GUN,L0) ENUSE. New beam line expanded: *LIN.01* PRINT, FULL TWISS, SAVE, COUPLE, BETA0=TWSS0 TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWCPGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=0.12, & COLOUR=100, -SPLINE, RANGE=CATHODEB/ENDL0B, FILE="LCLS2sc_color", & 860 TITLE="GUNB + L0B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, VMIN=0, VMAX=20, & COLOUR=100, -SPLINE, RANGE=CATHODEB/ENDL0B, FILE="LCLS2sc_color", & TITLE="GUNB + L0B" 865 ! BEAM0 to SXR Main Dump BEAM, ENERGY=Ei SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SXRi ENUSE. Beam line re-expanded: SC_SXRI 870 TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, & COLOUR=100, SPLINE, RANGE=BEAM0/ENDL1B, FILE="LCLS2sc_color", & TITLE="Laser Heater + Coll0 + L1B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & 875 COLOUR=100, SPLINE, RANGE=BEAM0/ENDL1B, FILE="LCLS2sc_color", & TITLE="Laser Heater + Coll0 + L1B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGBC1B/ENDCOL1, FILE="LCLS2sc_color", & TITLE="BC1B + Coll1" 880 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, & COLOUR=100, SPLINE, RANGE=BEGL2B/ENDL2B, FILE="LCLS2sc_color", & TITLE="L2B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGL2B/ENDL2B, FILE="LCLS2sc_color", & 885 TITLE="L2B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGBC2B/ENDEMIT2, FILE="LCLS2sc_color", & TITLE="BC2B + Emit2" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & 890 COLOUR=100, SPLINE, RANGE=BEGL3B/ENDEXT, FILE="LCLS2sc_color", & TITLE="L3B + Extension" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGL3B/ENDEXT, FILE="LCLS2sc_color", & TITLE="L3B + Extension" 895 PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDOG/MQBP13, FILE="LCLS2sc_color", & TITLE="Dogleg + Match to Bypass + NIT Extension" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=MQBP13/ENDSPD_1, FILE="LCLS2sc_color", & 900 TITLE="Bypass Line to Spreader" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGSPS/ENDLTUS, FILE="LCLS2sc_color", & TITLE="Spreader + LTUS" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & 905 COLOUR=100, SPLINE, RANGE=BEGUNDS/DUMPFACEB, FILE="LCLS2sc_color", & TITLE="SXR Undulator to Dump" ! SXR Safety Dump 910 BEAM, ENERGY=Ei SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SFTSi ENUSE. New beam line expanded: SC_SFTSI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & 915 COLOUR=100, SPLINE, RANGE=BEGSFTS_1/SFTDMPB, FILE="LCLS2sc_color", & TITLE="SXR Safety Dump" ! Spreader to HXR Main Dump 920 BEAM, ENERGY=Ei SET, SETSP, SETSPh ; SET, SETAL, ALOFF USE, SC_HXRi ENUSE. Beam line re-expanded: SC_HXRI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & 925 COLOUR=100, SPLINE, RANGE=BEGSPH/ENDLTUH, FILE="LCLS2sc_color", & TITLE="Spreader + LTUH" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGUNDH/DUMPFACE, FILE="LCLS2sc_color", & TITLE="HXR Undulator to Dump" 930 ! Spreader to BSY Dump BEAM, ENERGY=Ei SET, SETSP, SETSPd ; SET, SETDA, DAOFF 935 USE, SC_BSYDi ENUSE. Beam line re-expanded: SC_BSYDI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGSPD_1/DUMPBSY, FILE="LCLS2sc_color", & TITLE="Spreader to BSY Dump" 940 ! DIAG0 BEAM, ENERGY=Ei USE, SC_DIAG0i ENUSE. Beam line re-expanded: SC_DIAG0I 945 TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDIAG0/ENDDIAG0, FILE="LCLS2sc_color", & TITLE="DIAG0" 950 ! DASEL (deferred) BEAM, ENERGY=Ei SET, SETSP, SETSPd ; SET, SETDA, DAON ; SET, ROLLRC, 0 SETK2scDA 955 USE, SC_DASELi ENUSE. Beam line re-expanded: SC_DASELI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=rBETX,rBETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDASEL/ENDBSYA_2, FILE="LCLS2sc_color", & TITLE="DASEL to A-line" 960 SET, ROLLRC, +1 !ENDCOMMENT ! ------------------------------------------------------------------------------ 965 !CALL "LCLS2sc_area_plots.mad8" ! ------------------------------------------------------------------------------ STOP ZEND. 33 Warning messages, 0 Error messages. MAD terminated on 15/09/21 at 14.37.24 MZEND. Usage statistics for 1 dynamic stores. Map of store 0 / / ------------------------ Division Number of times Kind Max-size Garb-coll. Mode Position used allowed Wiped user auto Pushd Redcd 1 QDIV1 0 1 9 99831 56000006 36 0 0 68 0 2 QDIV2 1 1 55999606 5596254 56000006 0 0 0 0 0 20 system 1 8 56000006 111 56000006 0 0 0 0 0