FLASSI. ECHO stream rerouted to file: LCLS2sc.echo FLASSI. PRINT stream rerouted to file: LCLS2sc.print FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: common.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: CM.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: DIAG0.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: INJ.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BC1.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BC2.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: EXT.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: DLBM.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: SPRD.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: CUSXR.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: ALINE.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BYP.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: LTU.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: UND.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: SFT.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: SXTES.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: DASEL.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BSYsc.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: standard input ENBEAM. ## Warning ## Redundant data on BEAM --- SIGE will be ignored. ! ------------------------------------------------------------------------------ 530 !CALL, FILENAME="LCLS2sc_beams.mad8" !alternate beams & configurations !CALL, FILENAME="LCLS2sc_match.mad8" !CALL, FILENAME="LCLS2sc_XLEAP.mad8" !CALL, FILENAME="RDB/LCLS2sc_makeSymbols.mad8" 535 !CALL, FILENAME="elegant/LCLS2sc_makeElegant.mad8" !STOP ! ------------------------------------------------------------------------------ 540 ! SURVEY in linac coordinates ! ------------------------------------------------------------------------------ ! SXR 545 !COMMENT ASSIGN, PRINT="LCLS2scS.print" FLASSI. Closing PRINT file: LCLS2sc.print FLASSI. PRINT stream rerouted to file: LCLS2scS.print BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SXR ENUSE. New beam line expanded: SC_SXR 550 !SAVELINE, NAME="SC_SXR", FILENAME="LCLS2scS.saveline" PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scS_survey.tape" SURVEY. Output written on file: LCLS2scS_survey.tape BEAM, ENERGY=Ei USE, SC_SXRi ENUSE. New beam line expanded: SC_SXRI 555 PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scS_twiss.tape" !, & TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scS_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2scS_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=X,Y, & STYLE=100, SPLINE, RANGE=BEGLTUS/DUMPFACEB, FILE="LCLS2scS", & 560 TITLE="SC-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACEB, FILE="LCLS2scS", & TITLE="SC-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 565 STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACEB, FILE="LCLS2scS", & TITLE="SC-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACEB, FILE="LCLS2scS", & TITLE="SC-linac to SXR dump" 570 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=WS31B/DU7S[31], FILE="LCLS2scS", & TITLE="UNDS (SC beam, 4 GeV)" !ENDCOMMENT 575 ! ------------------------------------------------------------------------------ ! SXR safety dump COMMENT 580 ASSIGN, PRINT="LCLS2scSS.print" BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SFTS PRINT, FULL 585 SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scSS_survey.tape" ENDCOMMENT ! ------------------------------------------------------------------------------ 590 ! SXR "2.x" !COMMENT ASSIGN, PRINT="LCLS2scS2_X.print" FLASSI. Closing PRINT file: LCLS2scS.print FLASSI. PRINT stream rerouted to file: LCLS2scS2_X.print BEAM, ENERGY=E0 595 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_S2_X ENUSE. New beam line expanded: SC_S2_X PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scS2_X_survey.tape" SURVEY. Output written on file: LCLS2scS2_X_survey.tape !ENDCOMMENT 600 ! ------------------------------------------------------------------------------ ! SXR TXI 605 !COMMENT ASSIGN, PRINT="LCLS2scSTXI.print" FLASSI. Closing PRINT file: LCLS2scS2_X.print FLASSI. PRINT stream rerouted to file: LCLS2scSTXI.print BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_STXI ENUSE. New beam line expanded: SC_STXI 610 PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scSTXI_survey.tape" SURVEY. Output written on file: LCLS2scSTXI_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 615 ! SXR TMO !COMMENT ASSIGN, PRINT="LCLS2scSTMO.print" FLASSI. Closing PRINT file: LCLS2scSTXI.print FLASSI. PRINT stream rerouted to file: LCLS2scSTMO.print 620 BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_STMO ENUSE. New beam line expanded: SC_STMO PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scSTMO_survey.tape" SURVEY. Output written on file: LCLS2scSTMO_survey.tape 625 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! HXR 630 !COMMENT ASSIGN, PRINT="LCLS2scH.print" FLASSI. Closing PRINT file: LCLS2scSTMO.print FLASSI. PRINT stream rerouted to file: LCLS2scH.print BEAM, ENERGY=E0 SET, SETSP, SETSPh ; SET, SETAL, ALOFF 635 USE, SC_HXR ENUSE. New beam line expanded: SC_HXR !SAVELINE, NAME="SC_HXR", FILENAME="LCLS2scH.saveline" PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scH_survey.tape" SURVEY. Output written on file: LCLS2scH_survey.tape BEAM, ENERGY=Ei 640 USE, SC_HXRi ENUSE. New beam line expanded: SC_HXRI PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scH_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scH_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2scH_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & 645 STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACE, FILE="LCLS2scH", & TITLE="SC-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACE, FILE="LCLS2scH", & TITLE="SC-linac to HXR dump" 650 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACE, FILE="LCLS2scH", & TITLE="SC-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=WS31/DU7H[25], FILE="LCLS2scH", & 655 TITLE="UNDH (SC beam, 4 GeV)" !ENDCOMMENT ! ------------------------------------------------------------------------------ 660 ! BSY dump !COMMENT ASSIGN, PRINT="LCLS2scD.print" FLASSI. Closing PRINT file: LCLS2scH.print BEAM, ENERGY=E0 665 SET, SETSP, SETSPd ; SET, SETDA, DAOFF USE, SC_BSYD ENUSE. New beam line expanded: SC_BSYD !SAVELINE, NAME="SC_BSYD", FILENAME="LCLS2scD.saveline" PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scD_survey.tape" SURVEY. Output written on file: LCLS2scD_survey.tape 670 BEAM, ENERGY=Ei USE, SC_BSYDi ENUSE. New beam line expanded: SC_BSYDI PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scD_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scD_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2scD_rmat.tape" 675 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPBSY, FILE="LCLS2scD", & TITLE="SC-linac to BSY dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPBSY, FILE="LCLS2scD", & 680 TITLE="SC-linac to BSY dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPBSY, FILE="LCLS2scD", & TITLE="SC-linac to BSY dump" !ENDCOMMENT 685 ! ------------------------------------------------------------------------------ ! DIAG0 690 !COMMENT ASSIGN, PRINT="DIAG0.print" FLASSI. Closing PRINT file: LCLS2scD.print BEAM, ENERGY=E0 USE, SC_DIAG0 ENUSE. New beam line expanded: SC_DIAG0 !SAVELINE, NAME="SC_DIAG0", FILENAME="DIAG0.saveline" 695 PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="DIAG0_survey.tape" SURVEY. Output written on file: DIAG0_survey.tape BEAM, ENERGY=Ei USE, SC_DIAG0i ENUSE. New beam line expanded: SC_DIAG0I PRINT, FULL 700 TWISS, SAVE, BETA0=TWSSi, TAPE="DIAG0_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWISS. Lattice functions written on file: DIAG0_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="DIAG0_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEAM0/ENDDIAG0, FILE="DIAG0", & TITLE="SC-linac to DIAG0" 705 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/ENDDIAG0, FILE="DIAG0", & TITLE="SC-linac to DIAG0" !ENDCOMMENT 710 ! ------------------------------------------------------------------------------ ! S30XL (a.k.a. DASEL; funded off-project) !COMMENT 715 ASSIGN, PRINT="LCLS2scDA.print" FLASSI. Closing PRINT file: DIAG0.print BEAM, ENERGY=E0 SET, SETSP, SETSPd ; SET, SETDA, DAON ; SET, ROLLRC, +1 SETK2scDA USE, SC_DASEL ENUSE. New beam line expanded: SC_DASEL 720 !SAVELINE, NAME="SC_DASEL", FILENAME="LCLS2scDA.saveline" PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scDA_survey.tape" SURVEY. Output written on file: LCLS2scDA_survey.tape BEAM, ENERGY=Ei SET, ROLLRC, 0 725 USE, SC_DASELi ENUSE. New beam line expanded: SC_DASELI PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scDA_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scDA_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2scDA_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & 730 STYLE=100, SPLINE, RANGE=BEAM0/ENDBSYA_2, FILE="LCLS2scDA", & TITLE="SC-linac to DASEL" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=rBETX,rBETY, & STYLE=100, SPLINE, RANGE=BEAM0/ENDBSYA_2, FILE="LCLS2scDA", & TITLE="SC-linac to DASEL" 735 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/ENDBSYA_2, FILE="LCLS2scDA", & TITLE="SC-linac to DASEL" SET, ROLLRC, +1 !ENDCOMMENT 740 ! ------------------------------------------------------------------------------ ! SURVEY in BSY coordinates (from start of spreader) ! ------------------------------------------------------------------------------ 745 ! SXR !COMMENT ASSIGN, PRINT="BSY-LCLS2scS.print" FLASSI. Closing PRINT file: LCLS2scDA.print BEAM, ENERGY=Ef 750 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scS ENUSE. New beam line expanded: BSYLCLS2SCS PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scS_survey.tape" SURVEY. Output written on file: BSY-LCLS2scS_survey.tape 755 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! SXR safety dump 760 !COMMENT ASSIGN, PRINT="BSY-LCLS2scSS.print" FLASSI. Closing PRINT file: BSY-LCLS2scS.print BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF 765 USE, BSYLCLS2scSS ENUSE. New beam line expanded: BSYLCLS2SCSS PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scSS_survey.tape" SURVEY. Output written on file: BSY-LCLS2scSS_survey.tape !ENDCOMMENT 770 ! ------------------------------------------------------------------------------ ! SXR 2_X !"2.X" 775 !COMMENT ASSIGN, PRINT="BSY-LCLS2scS2_X.print" FLASSI. Closing PRINT file: BSY-LCLS2scSS.print BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scS2_X ENUSE. New beam line expanded: BSYLCLS2SCS2_X 780 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scS2_X_survey.tape" SURVEY. Output written on file: BSY-LCLS2scS2_X_survey.tape !ENDCOMMENT 785 ! ------------------------------------------------------------------------------ ! SXR TXI !COMMENT 790 ASSIGN, PRINT="BSY-LCLS2scSTXI.print" FLASSI. Closing PRINT file: BSY-LCLS2scS2_X.print BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scSTXI ENUSE. New beam line expanded: BSYLCLS2SCSTXI PRINT, FULL 795 SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scSTXI_survey.tape" SURVEY. Output written on file: BSY-LCLS2scSTXI_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 800 ! SXR TMO !COMMENT ASSIGN, PRINT="BSY-LCLS2scSTMO.print" FLASSI. Closing PRINT file: BSY-LCLS2scSTXI.print 805 BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scSTMO ENUSE. New beam line expanded: BSYLCLS2SCSTMO PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & 810 TAPE="BSY-LCLS2scSTMO_survey.tape" SURVEY. Output written on file: BSY-LCLS2scSTMO_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 815 ! HXR !COMMENT ASSIGN, PRINT="BSY-LCLS2scH.print" FLASSI. Closing PRINT file: BSY-LCLS2scSTMO.print BEAM, ENERGY=Ef 820 SET, SETSP, SETSPh ; SET, SETAL, ALOFF USE, BSYLCLS2scH ENUSE. New beam line expanded: BSYLCLS2SCH PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scH_survey.tape" SURVEY. Output written on file: BSY-LCLS2scH_survey.tape 825 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! BSY dump 830 !COMMENT ASSIGN, PRINT="BSY-LCLS2scD.print" FLASSI. Closing PRINT file: BSY-LCLS2scH.print BEAM, ENERGY=Ef SET, SETSP, SETSPd ; SET, SETDA, DAOFF 835 USE, BSYLCLS2scD ENUSE. New beam line expanded: BSYLCLS2SCD PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scD_survey.tape" SURVEY. Output written on file: BSY-LCLS2scD_survey.tape !ENDCOMMENT 840 ! ------------------------------------------------------------------------------ ! S30XL (a.k.a. DASEL) 845 !COMMENT ASSIGN, PRINT="BSY-LCLS2scDA.print" FLASSI. Closing PRINT file: BSY-LCLS2scD.print BEAM, ENERGY=Ef SET, SETSP, SETSPd ; SET, SETDA, DAON ; SET, ROLLRC, +1 SETK2scDA 850 USE, BSYLCLS2scDA ENUSE. New beam line expanded: BSYLCLS2SCDA PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scDA_survey.tape" SURVEY. Output written on file: BSY-LCLS2scDA_survey.tape !ENDCOMMENT 855 ! ============================================================================== ! Twiss plots 860 !COMMENT ASSIGN, PRINT="LCLS2sc.print" FLASSI. Closing PRINT file: BSY-LCLS2scDA.print ! Cathode to BEAM0 865 BEAM, ENERGY=E0 USE, (GUN,L0) ENUSE. New beam line expanded: *LIN.01* PRINT, FULL TWISS, SAVE, COUPLE, BETA0=TWSS0 TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWCPGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=0.12, & 870 COLOUR=100, -SPLINE, RANGE=CATHODEB/ENDL0B, FILE="LCLS2sc_color", & TITLE="GUNB + L0B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, VMIN=0, VMAX=20, & COLOUR=100, -SPLINE, RANGE=CATHODEB/ENDL0B, FILE="LCLS2sc_color", & TITLE="GUNB + L0B" 875 ! BEAM0 to SXR Main Dump BEAM, ENERGY=Ei SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF 880 USE, SC_SXRi ENUSE. Beam line re-expanded: SC_SXRI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, & COLOUR=100, SPLINE, RANGE=BEAM0/ENDL1B, FILE="LCLS2sc_color", & TITLE="Laser Heater + Coll0 + L1B" 885 PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEAM0/ENDL1B, FILE="LCLS2sc_color", & TITLE="Laser Heater + Coll0 + L1B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGBC1B/ENDCOL1, FILE="LCLS2sc_color", & 890 TITLE="BC1B + Coll1" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, & COLOUR=100, SPLINE, RANGE=BEGL2B/ENDL2B, FILE="LCLS2sc_color", & TITLE="L2B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 895 COLOUR=100, SPLINE, RANGE=BEGL2B/ENDL2B, FILE="LCLS2sc_color", & TITLE="L2B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGBC2B/ENDEMIT2, FILE="LCLS2sc_color", & TITLE="BC2B + Emit2" 900 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & COLOUR=100, SPLINE, RANGE=BEGL3B/ENDEXT, FILE="LCLS2sc_color", & TITLE="L3B + Extension" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGL3B/ENDEXT, FILE="LCLS2sc_color", & 905 TITLE="L3B + Extension" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDOG/MQBP13, FILE="LCLS2sc_color", & TITLE="Dogleg + Match to Bypass + NIT Extension" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 910 COLOUR=100, SPLINE, RANGE=MQBP13/ENDSPD_1, FILE="LCLS2sc_color", & TITLE="Bypass Line to Spreader" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGSPS/ENDLTUS, FILE="LCLS2sc_color", & TITLE="Spreader + LTUS" 915 PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGUNDS/DUMPFACEB, FILE="LCLS2sc_color", & TITLE="SXR Undulator to Dump" ! SXR Safety Dump 920 BEAM, ENERGY=Ei SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SFTSi ENUSE. New beam line expanded: SC_SFTSI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS 925 PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGSFTS_1/SFTDMPB, FILE="LCLS2sc_color", & TITLE="SXR Safety Dump" ! Spreader to HXR Main Dump 930 BEAM, ENERGY=Ei SET, SETSP, SETSPh ; SET, SETAL, ALOFF USE, SC_HXRi ENUSE. Beam line re-expanded: SC_HXRI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS 935 PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGSPH/ENDLTUH, FILE="LCLS2sc_color", & TITLE="Spreader + LTUH" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGUNDH/DUMPFACE, FILE="LCLS2sc_color", & 940 TITLE="HXR Undulator to Dump" ! Spreader to BSY Dump BEAM, ENERGY=Ei 945 SET, SETSP, SETSPd ; SET, SETDA, DAOFF USE, SC_BSYDi ENUSE. Beam line re-expanded: SC_BSYDI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGSPD_1/DUMPBSY, FILE="LCLS2sc_color", & 950 TITLE="Spreader to BSY Dump" ! DIAG0 BEAM, ENERGY=Ei 955 USE, SC_DIAG0i ENUSE. Beam line re-expanded: SC_DIAG0I TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDIAG0/ENDDIAG0, FILE="LCLS2sc_color", & TITLE="DIAG0" 960 ! DASEL (deferred) BEAM, ENERGY=Ei SET, SETSP, SETSPd ; SET, SETDA, DAON ; SET, ROLLRC, 0 965 SETK2scDA USE, SC_DASELi ENUSE. Beam line re-expanded: SC_DASELI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=rBETX,rBETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDASEL/ENDBSYA_2, FILE="LCLS2sc_color", & 970 TITLE="DASEL to A-line" SET, ROLLRC, +1 !ENDCOMMENT ! ------------------------------------------------------------------------------ 975 !CALL "LCLS2sc_area_plots.mad8" ! ------------------------------------------------------------------------------ 980 STOP ZEND. 33 Warning messages, 0 Error messages. MAD terminated on 23/03/23 at 14.57.06 MZEND. Usage statistics for 1 dynamic stores. Map of store 0 / / ------------------------ Division Number of times Kind Max-size Garb-coll. Mode Position used allowed Wiped user auto Pushd Redcd 1 QDIV1 0 1 9 121540 56000006 37 0 0 70 0 2 QDIV2 1 1 55999606 6722280 56000006 0 0 0 0 0 20 system 1 8 56000006 111 56000006 0 0 0 0 0