FLASSI. ECHO stream rerouted to file: LCLS2sc.echo FLASSI. PRINT stream rerouted to file: LCLS2sc.print FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: common.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: CM_SWAVE.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: DIAG0.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: INJ.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BC1.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BC2.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: EXT.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: DLBM.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: SPRD.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: CUSXR.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: ALINE.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BYP.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: LTU.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: UND.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: SFT.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: SXTES.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: DASEL.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: BSYsc.xsif FLCALL. Now reading file: LCLS2sc_master.xsif FLCALL. Now reading file: standard input ENBEAM. ## Warning ## Redundant data on BEAM --- SIGE will be ignored. ! ------------------------------------------------------------------------------ 535 !CALL, FILENAME="upgrade/MSXRXXsc.mad8" !SETupgrade !CALL, FILENAME="LCLS2sc_LHmodes.mad8" !laser heater operating modes 540 !CALL, FILENAME="LCLS2sc_beams.mad8" !alternate beams & configurations !CALL, FILENAME="LCLS2sc_match.mad8" !CALL, FILENAME="LCLS2sc_makeSymbols.mad8" !CALL, FILENAME="LCLS2sc_makeElegant.mad8" !CALL, FILENAME="LCLS2sc_XLEAP.mad8" 545 !STOP ! ------------------------------------------------------------------------------ ! SURVEY in linac coordinates 550 ! ------------------------------------------------------------------------------ ! SXR !COMMENT 555 ASSIGN, PRINT="LCLS2scS.print" FLASSI. Closing PRINT file: LCLS2sc.print FLASSI. PRINT stream rerouted to file: LCLS2scS.print BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SXR ENUSE. New beam line expanded: SC_SXR !SAVELINE, NAME="SC_SXR", FILENAME="LCLS2scS.saveline" 560 PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scS_survey.tape" SURVEY. Output written on file: LCLS2scS_survey.tape BEAM, ENERGY=Ei USE, SC_SXRi ENUSE. New beam line expanded: SC_SXRI PRINT, FULL 565 TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scS_twiss.tape", & RTAPE="LCLS2scS_rmat.tape" TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scS_twiss.tape TWISS. Effective R-matrices written on file: LCLS2scS_rmat.tape TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACEB, FILE="LCLS2scS", & TITLE="SC-linac to SXR dump" 570 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACEB, FILE="LCLS2scS", & TITLE="SC-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACEB, FILE="LCLS2scS", & 575 TITLE="SC-linac to SXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=WS31B/DU7S[31], FILE="LCLS2scS", & TITLE="UNDS (SC beam, 4 GeV)" !ENDCOMMENT 580 ! ------------------------------------------------------------------------------ ! SXR safety dump 585 COMMENT ASSIGN, PRINT="LCLS2scSS.print" BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SFTS 590 PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scSS_survey.tape" ENDCOMMENT ! ------------------------------------------------------------------------------ 595 ! SXR "2.x" !COMMENT ASSIGN, PRINT="LCLS2scS2_X.print" FLASSI. Closing PRINT file: LCLS2scS.print FLASSI. PRINT stream rerouted to file: LCLS2scS2_X.print 600 BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_S2_X ENUSE. New beam line expanded: SC_S2_X PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scS2_X_survey.tape" SURVEY. Output written on file: LCLS2scS2_X_survey.tape 605 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! SXR TXI 610 !COMMENT ASSIGN, PRINT="LCLS2scSTXI.print" FLASSI. Closing PRINT file: LCLS2scS2_X.print FLASSI. PRINT stream rerouted to file: LCLS2scSTXI.print BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF 615 USE, SC_STXI ENUSE. New beam line expanded: SC_STXI PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scSTXI_survey.tape" SURVEY. Output written on file: LCLS2scSTXI_survey.tape !ENDCOMMENT 620 ! ------------------------------------------------------------------------------ ! SXR TMO !COMMENT 625 ASSIGN, PRINT="LCLS2scSTMO.print" FLASSI. Closing PRINT file: LCLS2scSTXI.print FLASSI. PRINT stream rerouted to file: LCLS2scSTMO.print BEAM, ENERGY=E0 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_STMO ENUSE. New beam line expanded: SC_STMO PRINT, FULL 630 SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scSTMO_survey.tape" SURVEY. Output written on file: LCLS2scSTMO_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 635 ! HXR !COMMENT ASSIGN, PRINT="LCLS2scH.print" FLASSI. Closing PRINT file: LCLS2scSTMO.print FLASSI. PRINT stream rerouted to file: LCLS2scH.print BEAM, ENERGY=E0 640 SET, SETSP, SETSPh USE, SC_HXR ENUSE. New beam line expanded: SC_HXR !SAVELINE, NAME="SC_HXR", FILENAME="LCLS2scH.saveline" PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scH_survey.tape" SURVEY. Output written on file: LCLS2scH_survey.tape 645 BEAM, ENERGY=Ei USE, SC_HXRi ENUSE. New beam line expanded: SC_HXRI PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scH_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scH_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2scH_rmat.tape" 650 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACE, FILE="LCLS2scH", & TITLE="SC-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACE, FILE="LCLS2scH", & 655 TITLE="SC-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPFACE, FILE="LCLS2scH", & TITLE="SC-linac to HXR dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 660 STYLE=100, SPLINE, RANGE=WS31/DU7H[25], FILE="LCLS2scH", & TITLE="UNDH (SC beam, 4 GeV)" !ENDCOMMENT ! ------------------------------------------------------------------------------ 665 ! BSY dump !COMMENT ASSIGN, PRINT="LCLS2scD.print" FLASSI. Closing PRINT file: LCLS2scH.print 670 BEAM, ENERGY=E0 SET, SETSP, SETSPd ; SET, SETDA, DAOFF USE, SC_BSYD ENUSE. New beam line expanded: SC_BSYD !SAVELINE, NAME="SC_BSYD", FILENAME="LCLS2scD.saveline" PRINT, FULL 675 SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scD_survey.tape" SURVEY. Output written on file: LCLS2scD_survey.tape BEAM, ENERGY=Ei USE, SC_BSYDi ENUSE. New beam line expanded: SC_BSYDI PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scD_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scD_twiss.tape TWBTSV. Lattice functions saved in table: TWISS 680 ! RTAPE="LCLS2scD_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPBSY, FILE="LCLS2scD", & TITLE="SC-linac to BSY dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & 685 STYLE=100, SPLINE, RANGE=BEAM0/DUMPBSY, FILE="LCLS2scD", & TITLE="SC-linac to BSY dump" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/DUMPBSY, FILE="LCLS2scD", & TITLE="SC-linac to BSY dump" 690 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! DIAG0 695 !COMMENT ASSIGN, PRINT="DIAG0.print" FLASSI. Closing PRINT file: LCLS2scD.print BEAM, ENERGY=E0 USE, SC_DIAG0 ENUSE. New beam line expanded: SC_DIAG0 700 !SAVELINE, NAME="SC_DIAG0", FILENAME="DIAG0.saveline" PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="DIAG0_survey.tape" SURVEY. Output written on file: DIAG0_survey.tape BEAM, ENERGY=Ei USE, SC_DIAG0i ENUSE. New beam line expanded: SC_DIAG0I 705 PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="DIAG0_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWISS. Lattice functions written on file: DIAG0_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="DIAG0_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & STYLE=100, SPLINE, RANGE=BEAM0/ENDDIAG0, FILE="DIAG0", & 710 TITLE="SC-linac to DIAG0" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/ENDDIAG0, FILE="DIAG0", & TITLE="SC-linac to DIAG0" !ENDCOMMENT 715 ! ------------------------------------------------------------------------------ ! DASEL (a.k.a. S30XL or LESA; funded off-project) 720 !COMMENT ASSIGN, PRINT="LCLS2scDA.print" FLASSI. Closing PRINT file: DIAG0.print BEAM, ENERGY=E0 SET, SETSP, SETSPd ; SET, SETDA, DAON SETK2scDA 725 USE, SC_DASEL ENUSE. New beam line expanded: SC_DASEL !SAVELINE, NAME="SC_DASEL", FILENAME="LCLS2scDA.saveline" PRINT, FULL SURVEY, X0=Xgun, Y0=Ygun, Z0=Zgun, TAPE="LCLS2scDA_survey.tape" SURVEY. Output written on file: LCLS2scDA_survey.tape BEAM, ENERGY=Ei 730 USE, SC_DASELi ENUSE. New beam line expanded: SC_DASELI PRINT, FULL TWISS, SAVE, BETA0=TWSSi, TAPE="LCLS2scDA_twiss.tape" !, & TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWISS. Lattice functions written on file: LCLS2scDA_twiss.tape TWBTSV. Lattice functions saved in table: TWISS ! RTAPE="LCLS2scDA_rmat.tape" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & 735 STYLE=100, SPLINE, RANGE=BEAM0/ENDBSYA_2, FILE="LCLS2scDA", & TITLE="SC-linac to DASEL" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=rBETX,rBETY, & STYLE=100, SPLINE, RANGE=BEAM0/ENDBSYA_2, FILE="LCLS2scDA", & TITLE="SC-linac to DASEL" 740 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=DX,DY, & STYLE=100, SPLINE, RANGE=BEAM0/ENDBSYA_2, FILE="LCLS2scDA", & TITLE="SC-linac to DASEL" !ENDCOMMENT 745 ! ------------------------------------------------------------------------------ ! SURVEY in BSY coordinates (from start of spreader) ! ------------------------------------------------------------------------------ ! SXR 750 !COMMENT ASSIGN, PRINT="BSY-LCLS2scS.print" FLASSI. Closing PRINT file: LCLS2scDA.print BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF 755 USE, BSYLCLS2scS ENUSE. New beam line expanded: BSYLCLS2SCS PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scS_survey.tape" SURVEY. Output written on file: BSY-LCLS2scS_survey.tape !ENDCOMMENT 760 ! ------------------------------------------------------------------------------ ! SXR safety dump 765 !COMMENT ASSIGN, PRINT="BSY-LCLS2scSS.print" FLASSI. Closing PRINT file: BSY-LCLS2scS.print BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scSS ENUSE. New beam line expanded: BSYLCLS2SCSS 770 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scSS_survey.tape" SURVEY. Output written on file: BSY-LCLS2scSS_survey.tape !ENDCOMMENT 775 ! ------------------------------------------------------------------------------ ! SXR 2_X !"2.X" !COMMENT 780 ASSIGN, PRINT="BSY-LCLS2scS2_X.print" FLASSI. Closing PRINT file: BSY-LCLS2scSS.print BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scS2_X ENUSE. New beam line expanded: BSYLCLS2SCS2_X PRINT, FULL 785 SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scS2_X_survey.tape" SURVEY. Output written on file: BSY-LCLS2scS2_X_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 790 ! SXR TXI !COMMENT ASSIGN, PRINT="BSY-LCLS2scSTXI.print" FLASSI. Closing PRINT file: BSY-LCLS2scS2_X.print 795 BEAM, ENERGY=Ef SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scSTXI ENUSE. New beam line expanded: BSYLCLS2SCSTXI PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & 800 TAPE="BSY-LCLS2scSTXI_survey.tape" SURVEY. Output written on file: BSY-LCLS2scSTXI_survey.tape !ENDCOMMENT ! ------------------------------------------------------------------------------ 805 ! SXR TMO !COMMENT ASSIGN, PRINT="BSY-LCLS2scSTMO.print" FLASSI. Closing PRINT file: BSY-LCLS2scSTXI.print BEAM, ENERGY=Ef 810 SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, BSYLCLS2scSTMO ENUSE. New beam line expanded: BSYLCLS2SCSTMO PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scSTMO_survey.tape" SURVEY. Output written on file: BSY-LCLS2scSTMO_survey.tape 815 !ENDCOMMENT ! ------------------------------------------------------------------------------ ! HXR 820 !COMMENT ASSIGN, PRINT="BSY-LCLS2scH.print" FLASSI. Closing PRINT file: BSY-LCLS2scSTMO.print BEAM, ENERGY=Ef SET, SETSP, SETSPh 825 USE, BSYLCLS2scH ENUSE. New beam line expanded: BSYLCLS2SCH PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scH_survey.tape" SURVEY. Output written on file: BSY-LCLS2scH_survey.tape !ENDCOMMENT 830 ! ------------------------------------------------------------------------------ ! BSY dump 835 !COMMENT ASSIGN, PRINT="BSY-LCLS2scD.print" FLASSI. Closing PRINT file: BSY-LCLS2scH.print BEAM, ENERGY=Ef SET, SETSP, SETSPd ; SET, SETDA, DAOFF USE, BSYLCLS2scD ENUSE. New beam line expanded: BSYLCLS2SCD 840 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scD_survey.tape" SURVEY. Output written on file: BSY-LCLS2scD_survey.tape !ENDCOMMENT 845 ! ------------------------------------------------------------------------------ ! DASEL (a.k.a. S30XL, LESA) !COMMENT 850 ASSIGN, PRINT="BSY-LCLS2scDA.print" FLASSI. Closing PRINT file: BSY-LCLS2scD.print BEAM, ENERGY=Ef SET, SETSP, SETSPd ; SET, SETDA, DAON SETK2scDA USE, BSYLCLS2scDA ENUSE. New beam line expanded: BSYLCLS2SCDA 855 PRINT, FULL SURVEY, X0=Xf, Y0=Yf, Z0=Zf, THETA0=THETAf, PHI0=PHIf, PSI0=PSIf, & TAPE="BSY-LCLS2scDA_survey.tape" SURVEY. Output written on file: BSY-LCLS2scDA_survey.tape !ENDCOMMENT 860 ! ============================================================================== ! Twiss plots !COMMENT 865 ASSIGN, PRINT="LCLS2sc.print" FLASSI. Closing PRINT file: BSY-LCLS2scDA.print ! Cathode to BEAM0 BEAM, ENERGY=E0 870 USE, (GUN,L0) ENUSE. New beam line expanded: *LIN.01* PRINT, FULL TWISS, SAVE, COUPLE, BETA0=TWSS0 TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWCPGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=0.12, & COLOUR=100, -SPLINE, RANGE=CATHODEB/ENDL0B, FILE="LCLS2sc_color", & 875 TITLE="GUNB + L0B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, VMIN=0, VMAX=20, & COLOUR=100, -SPLINE, RANGE=CATHODEB/ENDL0B, FILE="LCLS2sc_color", & TITLE="GUNB + L0B" 880 ! BEAM0 to SXR Main Dump BEAM, ENERGY=Ei SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SXRi ENUSE. Beam line re-expanded: SC_SXRI 885 TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, & COLOUR=100, SPLINE, RANGE=BEAM0/ENDL1B, FILE="LCLS2sc_color", & TITLE="Laser Heater + Coll0 + L1B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & 890 COLOUR=100, SPLINE, RANGE=BEAM0/ENDL1B, FILE="LCLS2sc_color", & TITLE="Laser Heater + Coll0 + L1B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGBC1B/ENDCOL1, FILE="LCLS2sc_color", & TITLE="BC1B + Coll1" 895 PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, & COLOUR=100, SPLINE, RANGE=BEGL2B/ENDL2B, FILE="LCLS2sc_color", & TITLE="L2B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGL2B/ENDL2B, FILE="LCLS2sc_color", & 900 TITLE="L2B" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGBC2B/ENDEMIT2, FILE="LCLS2sc_color", & TITLE="BC2B + Emit2" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=ENERGY, VMIN=0, VMAX=5, & 905 COLOUR=100, SPLINE, RANGE=BEGL3B/ENDEXT, FILE="LCLS2sc_color", & TITLE="L3B + Extension" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=BEGL3B/ENDEXT, FILE="LCLS2sc_color", & TITLE="L3B + Extension" 910 PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDOG/MQBP13, FILE="LCLS2sc_color", & TITLE="Dogleg + Match to Bypass + NIT Extension" PLOT, TABLE=TWISS, HAXIS=S, VAXIS=BETX,BETY, & COLOUR=100, SPLINE, RANGE=MQBP13/ENDSPD_1, FILE="LCLS2sc_color", & 915 TITLE="Bypass Line to Spreader" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGSPS/ENDLTUS, FILE="LCLS2sc_color", & TITLE="Spreader + LTUS" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & 920 COLOUR=100, SPLINE, RANGE=BEGUNDS/DUMPFACEB, FILE="LCLS2sc_color", & TITLE="SXR Undulator to Dump" ! SXR Safety Dump 925 BEAM, ENERGY=Ei SET, SETSP, SETSPs ; SET, SETCUS, CUSOFF USE, SC_SFTSi ENUSE. New beam line expanded: SC_SFTSI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & 930 COLOUR=100, SPLINE, RANGE=BEGSFTS_1/SFTDMPB, FILE="LCLS2sc_color", & TITLE="SXR Safety Dump" ! Spreader to HXR Main Dump 935 BEAM, ENERGY=Ei SET, SETSP, SETSPh USE, SC_HXRi ENUSE. Beam line re-expanded: SC_HXRI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & 940 COLOUR=100, SPLINE, RANGE=BEGSPH/ENDLTUH, FILE="LCLS2sc_color", & TITLE="Spreader + LTUH" PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGUNDH/DUMPFACE, FILE="LCLS2sc_color", & TITLE="HXR Undulator to Dump" 945 ! Spreader to BSY Dump BEAM, ENERGY=Ei SET, SETSP, SETSPd ; SET, SETDA, DAOFF 950 USE, SC_BSYDi ENUSE. Beam line re-expanded: SC_BSYDI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGSPD_1/DUMPBSY, FILE="LCLS2sc_color", & TITLE="Spreader to BSY Dump" 955 ! DIAG0 BEAM, ENERGY=Ei USE, SC_DIAG0i ENUSE. Beam line re-expanded: SC_DIAG0I 960 TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=BETX,BETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDIAG0/ENDDIAG0, FILE="LCLS2sc_color", & TITLE="DIAG0" 965 ! DASEL (deferred) BEAM, ENERGY=Ei SET, SETSP, SETSPd ; SET, SETDA, DAON SETK2scDA 970 USE, SC_DASELi ENUSE. Beam line re-expanded: SC_DASELI TWISS, SAVE, BETA0=TWSSi TBCREA. ## Warning ## Table buffer "TWISS" already exists --- previous version deleted. TWBTGO. ## Warning ## TWISS found transverse coupling for delta(p)/p = 0.000000 Please use the COUPLE option. TWBTGO. ## Warning ## TWISS uses the RF system and synchrotron radiation only to find the closed orbit. for optical calculations it ignores both. TWBTSV. Lattice functions saved in table: TWISS PLOT, TABLE=TWISS, HAXIS=S, VAXIS1=rBETX,rBETY, VAXIS2=DX,DY, & COLOUR=100, SPLINE, RANGE=BEGDASEL/ENDBSYA_2, FILE="LCLS2sc_color", & TITLE="DASEL to A-line" 975 !ENDCOMMENT ! ------------------------------------------------------------------------------ !CALL "LCLS2sc_area_plots.mad8" 980 ! ------------------------------------------------------------------------------ STOP ZEND. 33 Warning messages, 0 Error messages. MAD terminated on 12/04/24 at 11.23.52 MZEND. Usage statistics for 1 dynamic stores. Map of store 0 / / ------------------------ Division Number of times Kind Max-size Garb-coll. Mode Position used allowed Wiped user auto Pushd Redcd 1 QDIV1 0 1 9 121725 56000006 36 0 0 68 0 2 QDIV2 1 1 55999606 6727356 56000006 0 0 0 0 0 20 system 1 8 56000006 111 56000006 0 0 0 0 0