Present: Peter Bosted, Keith Griffioen, Sebastian Kuhn, Perry Anthony, Bill Olson, Don Crabb, Ray Arnold E161 Target: pretty much decdidd to go with Oxford "NRM" magnet (existing design), with no transverse field. Magnet about 93 cm long, with 18.5 cm bore, and uniform fild region of 8 cm (probably can go to 10 cm). Schedule: E164 wants to run at same time as E160. Would interleaving on one-month basis be good? Most pople agree it would be ok, but overhead in going to 120 Hz may be prohibitive. LASS Magnet Test. Look like ready for next week. Run at 2700 A and make some fild measurements. Detectors: compatability of E161/E160. Peter is invesitgating if bigger dtectors (same size as E161) could be used for E160. Drawback is that many J/psi will have poor resolution: cannot separate out the psi_primes. E161: Sebastian is converging on a design with 1.8 m of iron wedge in LASS, and 1.3 of alumina between target and iron. Resolution seems to be adequate. Peter will invstigate backgrounds.