BEGIN    BABAR                 ! experiment name
         SL_tag                ! method name 
         PRELIMINARY           ! status and reference
INCLUDE babar_sltag.param

MEASUREMENT br stat syst 
DATA  br     stat   syst
      1.03   0.25   0.13
      
DATA  ! correspond to table IV of BAD1161.009
      ! Uncorrelated errors are labeled BbrSlN, where N is the line number
      ! in the table.  Systematics that are correlated with other
      ! measurements must be given the same names in all input files.
      ! N.B. - the sign in front of the error gives the change in the
      ! restult for a positive excursion of the parameter.  The '%'
      ! indicates that the error is specified as a fraction of the
      ! measurement.  The '&' indicates that the error should be
      ! treated as a relative (not absolute) error.
       BbrSl1%&   rholnu%    BbrSl4%&   BbrSl5%&
        +0.1       -3.2         0.3       -1.7  
DATA   buSF%&     bxlnu%     BbrSl8%    Bbrtrk%&
        +0.9       -2.8        +4.7       -1.6  
DATA   BbrEid%&   BbrMuid%&  BbrSl13%   BbrSl14% 
        -1.1       -1.4        -9.0       -1.6  
DATA   BbrSl15%   BbrSl16%   BbrBcnt%&  fb0%&
        -0.8       +3.5        -1.1       -2.7
END


! NOW THE PARTIAL BF AT HIGH Q2

BEGIN    BABAR                 ! experiment name
         SL_tag                ! method name 
         PRELIMINARY           ! status and reference
INCLUDE babar_sltag.param

MEASUREMENT br16 stat syst 
DATA  br16   stat   syst
      0.21   0.14   0.06
      
DATA  ! 
       BbrSl1&
        +0.06 
END


BEGIN    BABAR                 ! experiment name
         SL_tag0               ! method name 
         PRELIMINARY           ! status and reference
!INCLUDE babar_sltag.param

MEASUREMENT br stat syst 
DATA  br     stat   syst
      3.31   0.68   0.42
      
DATA  ! correspond to table 4 or BAD1156.009
      ! Uncorrelated errors are labeled BbrS0N, where N is the line number
      ! in the table.  Systematics that are correlated with other
      ! measurements must be given the same names in all input files.
      ! N.B. - the sign in front of the error gives the change in the
      ! restult for a positive excursion of the parameter.  The '%'
      ! indicates that the error is specified as a fraction of the
      ! measurement.  The '&' indicates that the error should be
      ! treated as a relative (not absolute) error.
       BbrBcnt%&  BbrS02%    BbrS03%&   BbrS04%
        -1.1       -4.6        -6.0       -1.1  
DATA   BbrS05%    BbrS06%&   Bbrtrk%&   BbrEid%&
        +7.3       -3.9        -0.8       -1.4  
DATA   BbrMuid%&  BbrS09%    BbrS010% 
        -1.9        -5.0       -1.5  
END