Available MCP scans				(available FP scans)
● HV at -2.4kV, threshold at 100mV, red laser used unless otherwise noted.
● Reference scans for any PMT are highlighted in red.
PMT Model	Serial No.	SLAC ID	Scan folder	Xmin	Xmax	deltaX	Ymin	Ymax	deltaY	Triggers	Comments
Burle MCP	02010410	16	20040603	6	66	0.1	-12	42	1	20000	blue laser
		16	20040602	6	10	0.2	34.5	44.5	0.2	20000	fine scan of central region with ADC readout of pad 24 and neighbors
		16	20040528	5	22	0.1	33	52	0.1	20000	fine scan of central region with ADC readout of pad 24 and neighbors
		16	20040525	6	66	0.1	-12	42	1	20000	High peak efficiency, significant non-uniformity, efifciency drops to zero on all edge pads. All scans of this MCP at -2.66kV
Burle MCP	12110302	15	20040607	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		15	20040522	6	62	0.1	-12	42	1	20000	Reasonable uniformity, average peak efficiency. MCP shifted, few mm missing from scan on right side.
Burle MCP	12110303	14	20040608	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		14	20040519	6	62	0.1	-12	42	1	20000	Reasonable uniformity, average peak efficiency.
Burle MCP	04290302	13	20040309	6	62	0.1	-13	43	1	20000	Two dead pads, very poor uniformity, high peak efficiency. Returned and replaced.
Burle MCP	05070305	12	20040306	6	62	0.1	-13	43	1	20000	Repeat identical scan, 100% noise on pad 64 before interference at y=35mm. Returned and replaced.
		12	20040303	6	62	0.1	-13	43	1	20000	Poor uniformity, low overall efficiency. 100% noise on pad 64.
Burle MCP	09130301	11	20040615	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		11	20040301	6	62	0.1	-13	43	1	20000	Low effi overall, good uniformity.
Burle MCP	12040301	10	20040614	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		10	20040227	6	62	0.1	-13	43	1	20000	Low effi overall, reasonable uniformity.
Burle MCP	04290301	9	20040224	6	62	0.1	-13	43	1	20000	High peak efficiency, very significant non-uniformity. Returned and replaced.
Burle MCP	09130303	8	20040616	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		8	20040217	6	62	0.2	-12	42	0.2	20000	Fine scan of entire PMT.
		8	20040215	40	50	0.1	6	16	0.1	20000	Fine scan of pad 23.
		8	20040213	6	62	0.1	-13	43	1	20000	Low effi overall, uniformity OK. Performed detailed scans.
Burle MCP	08220302	7	20040620	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		7	20040210	6	62	0.1	-13	43	1	20000	Large uniformity variation, slightly lower peak effi.
Burle MCP	09050302	6	20040720	6	66	0.5	-12	42	1	20000	blue laser, coarse scan for cross-check
		6	20040719	6	66	0.5	-12	42	1	20000	red laser, coarse scan for cross-check
		6	20040623	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		6	20040206	6	62	0.1	-13	43	1	20000	Low effi overall, significant non-uniformity.
Burle MCP	07030301	5	20040613	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		5	20040412	6	62	0.1	-13	43	1	20000	HV=-2.6.kV
		5	20040409	6	62	0.1	-13	43	1	20000	HV=-2.5.kV
		5	20040201	7	64	0.1	-11	41	1	40000	Low effi overall, some noise in channel 64, significant non-uniformity.
Burle MCP	09130305	4	20040611	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		4	20040418	6	62	0.1	-13	43	1	20000	HV back at -2.4kV, rescanned y>=20, noise at large y.
		4	20040415	6	62	0.1	-13	43	1	20000	HV=-2.5kV
		4	20040128	7	64	0.1	-11	41	1	40000	Low effi overall, uniformity OK except for edge pads; some noise in channel 64.
Burle MCP	05220304	3	20040609	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		3	20040514	6	62	0.1	-12	42	1	20000	blue laser - very large laser intensity variations, cannot be compensated by calib PMT - very large time jitter, 32nsec delay line added.
		3	20040429	6	62	0.1	-12	42	1	20000	HV=-2.4kV
		3	20040427	47	58	0.1	12	23	0.1	20000	detailed scan pad 10
		3	20040424	8	18	0.1	18.5	29.5	0.1	20000	detailed scan pad 60
		3	20040422	6	62	0.1	-12	42	1	20000	HV=-2.4kV, efficiency still high
		3	20040401	6	62	0.2	-13	42	0.2	20000	Fine scan of entire PMT, some noise at large y
		3	20040329	6	62	0.1	-13	43	1	20000	Efficiency 30-40% higher than in 20040113 scan!
		3	20040123	7	64	0.1	-11	41	1	40000	HV=-2.2.kV
		3	20040119	7	64	0.1	-11	41	1	40000	HV=-2.3kV
		3	20040113	7	64	0.1	-11	41	1	40000	New electronics and cables since Jan 2004.
		3	20030913	7	64	0.1	-11	41	1	40000	Much noise in edge channels.
		3	20030807	7	64	0.1	-11	41	1	40000	thresh=50mV
		3	20030801	7	64	0.1	-11	41	1	40000	thresh=65mV
		3	20030728	7	64	0.1	-11	41	1	40000	HV=-2.1kV, thresh=85mV
		3	20030724	7	64	0.1	-11	41	1	40000	HV=-2.2kV, thresh=85mV
		3	20030720	7	64	0.1	-11	41	1	40000	HV=-2.3kV, thresh=85mV
		3	20030712	7	64	0.1	-11	41	1	40000	HV=-2.4kV, thresh=85mV
Burle MCP	01150302	2	20040610	6	66	0.5	-12	42	1	20000	blue laser, coarse scan
		2	20030708	7	64	0.1	-11	24	1	40000	redid electronics before start, scanned only region with dead channels in previous run
		2	20030623	7	64	0.1	-11	41	1	40000	redid electronics before start
		2	20030530	7	64	0.1	1	4.7	0.1	40000	detailed scan
		2		26.8	35.3	0.1	4.8	9.5	0.1	40000	detailed scan
		2	20030521	7	64	0.1	-12	42	1	40000	4 dead pads: 18, 21, 26, 53
		2	20030513	7	64	0.1	-12	42	1	40000	3 dead pads: 18, 21, 26
		2	20030430	7	64	0.1	-12	42	1	40000	lots of noise, many inter files 10 times bigger
		2	20030425	7	64	0.1	-12	42	1	40000	lost one line at y=36mm, add line from previous scan. Used for IEEE 2003 and Elba NIM paper.
		2	20030418	7	60	0.1	-8	41	1	40000
		2	20030218	8	61	0.1	-10	41	1	40000	pads 1-8 dead
		2	20030213	8	61	0.1	-10	41	1	40000	low effi at first row, low effi in pads 1-8
		2	20030212	5	65	2	-25	39	2	40000	coarse scan
Other scans			20040429	-84	-78	0.01	44	45	0.01	20000	Scan of Photonis close to calib point to check stability.
Last updated:	7/21/2004	Joe