NAME

perlfunc - Perl builtin functions


DESCRIPTION

The functions in this section can serve as terms in an expression. They fall into two major categories: list operators and named unary operators. These differ in their precedence relationship with a following comma. (See the precedence table in the perlop manpage .) List operators take more than one argument, while unary operators can never take more than one argument. Thus, a comma terminates the argument of a unary operator, but merely separates the arguments of a list operator. A unary operator generally provides a scalar context to its argument, while a list operator may provide either scalar and list contexts for its arguments. If it does both, the scalar arguments will be first, and the list argument will follow. (Note that there can only ever be one list argument.) For instance, splice() has three scalar arguments followed by a list.

In the syntax descriptions that follow, list operators that expect a list (and provide list context for the elements of the list) are shown with LIST as an argument. Such a list may consist of any combination of scalar arguments or list values; the list values will be included in the list as if each individual element were interpolated at that point in the list, forming a longer single-dimensional list value. Elements of the LIST should be separated by commas.

Any function in the list below may be used either with or without parentheses around its arguments. (The syntax descriptions omit the parens.) If you use the parens, the simple (but occasionally surprising) rule is this: It LOOKS like a function, therefore it IS a function, and precedence doesn't matter. Otherwise it's a list operator or unary operator, and precedence does matter. And whitespace between the function and left parenthesis doesn't count--so you need to be careful sometimes:

print 1+2+3; # Prints 6. print(1+2) + 3; # Prints 3. print (1+2)+3; # Also prints 3! print +(1+2)+3; # Prints 6. print ((1+2)+3); # Prints 6.

If you run Perl with the -w switch it can warn you about this. For example, the third line above produces:

print (...) interpreted as function at - line 1. Useless use of integer addition in void context at - line 1.

For functions that can be used in either a scalar or list context, non-abortive failure is generally indicated in a scalar context by returning the undefined value, and in a list context by returning the null list.

Remember the following rule:

Each operator and function decides which sort of value it would be most.appropriate to return in a scalar context. Some operators return the length of the list that would have been returned in a list context. Some operators return the first value in the list. Some operators return the last value in the list. Some operators return a count of successful operations. In general, they do what you want, unless you want consistency.

-X FILEHANDLE

-X EXPR

-X
A file test, where X is one of the letters listed below. This unary operator takes one argument, either a filename or a filehandle, and tests the associated file to see if something is true about it. If the argument is omitted, tests $_ , except for -t , which tests STDIN. Unless otherwise documented, it returns 1 for TRUE and '' for FALSE, or the undefined value if the file doesn't exist. Despite the funny names, precedence is the same as any other named unary operator, and the argument may be parenthesized like any other unary operator. The operator may be any of:

-r File is readable by effective uid/gid. -w File is writable by effective uid/gid. -x File is executable by effective uid/gid. -o File is owned by effective uid. -R File is readable by real uid/gid. -W File is writable by real uid/gid. -X File is executable by real uid/gid. -O File is owned by real uid. -e File exists. -z File has zero size. -s File has non-zero size (returns size). -f File is a plain file. -d File is a directory. -l File is a symbolic link. -p File is a named pipe (FIFO). -S File is a socket. -b File is a block special file. -c File is a character special file. -t Filehandle is opened to a tty. -u File has setuid bit set. -g File has setgid bit set. -k File has sticky bit set. -T File is a text file. -B File is a binary file (opposite of -T). -M Age of file in days when script started. -A Same for access time. -C Same for inode change time.

The interpretation of the file permission operators -r , -R , -w , -W , -x and -X is based solely on the mode of the file and the uids and gids of the user. There may be other reasons you can't actually read, write or execute the file. Also note that, for the superuser, -r , -R , -w and -W always return 1, and -x and -X return 1 if any execute bit is set in the mode. Scripts run by the superuser may thus need to do a stat() in order to determine the actual mode of the file, or temporarily set the uid to something else.

Example:

while (<>) { chop; next unless -f $_; # ignore specials ... }

Note that -s/a/b/ does not do a negated substitution. Saying -exp( $foo ) still works as expected, however--only single letters following a minus are interpreted as file tests.

The -T and -B switches work as follows. The first block or so of the file is examined for odd characters such as strange control codes or characters with the high bit set. If too many odd characters (>30%) are found, it's a -B file, otherwise it's a -T file. Also, any file containing null in the first block is considered a binary file. If -T or -B is used on a filehandle, the current stdio buffer is examined rather than the first block. Both -T and -B return TRUE on a null file, or a file at EOF when testing a filehandle.

If any of the file tests (or either the stat() or lstat() operators) are given the special filehandle consisting of a solitary underline, then the stat structure of the previous file test (or stat operator) is used, saving a system call. (This doesn't work with -t , and you need to remember that lstat() and -l will leave values in the stat structure for the symbolic link, not the real file.) Example:

print "Can do.\n" if -r $a || -w _ || -x _; stat($filename); print "Readable\n" if -r _; print "Writable\n" if -w _; print "Executable\n" if -x _; print "Setuid\n" if -u _; print "Setgid\n" if -g _; print "Sticky\n" if -k _; print "Text\n" if -T _; print "Binary\n" if -B _;

abs VALUE
Returns the absolute value of its argument.

accept NEWSOCKET,GENERICSOCKET
Accepts an incoming socket connect, just as the accept(2) system call does. Returns the packed address if it succeeded, FALSE otherwise. See example in the perlipc manpage .

alarm SECONDS
Arranges to have a SIGALRM delivered to this process after the specified number of seconds have elapsed. (On some machines, unfortunately, the elapsed time may be up to one second less than you specified because of how seconds are counted.) Only one timer may be counting at once. Each call disables the previous timer, and an argument of 0 may be supplied to cancel the previous timer without starting a new one. The returned value is the amount of time remaining on the previous timer.

For sleeps of finer granularity than one second, you may use Perl's syscall() interface to access setitimer(2) if your system supports it, or else see select below.

atan2 Y,X
Returns the arctangent of Y/X in the range -PI to PI.

bind SOCKET,NAME
Binds a network address to a socket, just as the bind system call does. Returns TRUE if it succeeded, FALSE otherwise. NAME should be a packed address of the appropriate type for the socket. See example in the perlipc manpage .

binmode FILEHANDLE
Arranges for the file to be read or written in "binary" mode in operating systems that distinguish between binary and text files. Files that are not in binary mode have CR LF sequences translated to LF on input and LF translated to CR LF on output. Binmode has no effect under Unix; in DOS, it may be imperative. If FILEHANDLE is an expression, the value is taken as the name of the filehandle.

bless REF,PACKAGE

bless REF
This function tells the referenced object (passed as REF) that it is now an object in PACKAGE--or the current package if no PACKAGE is specified, which is the usual case. It returns the reference for convenience, since a bless() is often the last thing in a constructor. See the perlobj manpage for more about the blessing (and blessings) of objects.

caller EXPR

caller
Returns the context of the current subroutine call. In a scalar context, returns TRUE if there is a caller, that is, if we're in a subroutine or eval() or require() , and FALSE otherwise. In a list context, returns

($package, $filename, $line) = caller;

With EXPR, it returns some extra information that the debugger uses to print a stack trace. The value of EXPR indicates how many call frames to go back before the current one.

($package, $filename, $line, $subroutine, $hasargs, $wantargs) = caller($i);

Furthermore, when called from within the DB package, caller returns more detailed information: it sets sets the list variable @DB:args to be the arguments with which that subroutine was invoked.

chdir EXPR
Changes the working directory to EXPR, if possible. If EXPR is omitted, changes to home directory. Returns TRUE upon success, FALSE otherwise. See example under die() .

chmod LIST
Changes the permissions of a list of files. The first element of the list must be the numerical mode. Returns the number of files successfully changed.

$cnt = chmod 0755, 'foo', 'bar'; chmod 0755, @executables;

chomp VARIABLE

chomp LIST

chomp
This is a slightly safer version of chop (see below). It removes any line ending that corresponds to the current value of $/ (also known as $INPUT_RECORD_SEPARATOR in the English module). It returns the number of characters removed. It's often used to remove the newline from the end of an input record when you're worried that the final record may be missing its newline. When in paragraph mode ( $/ = "" ), it removes all trailing newlines from the string. If VARIABLE is omitted, it chomps $_ . Example:

while (<>) { chomp; # avoid \n on last field @array = split(/:/); ... }

You can actually chomp anything that's an lvalue, including an assignment:

chomp($cwd = `pwd`); chomp($answer = <STDIN>);

If you chomp a list, each element is chomped, and the total number of characters removed is returned.

chop VARIABLE

chop LIST

chop
Chops off the last character of a string and returns the character chopped. It's used primarily to remove the newline from the end of an input record, but is much more efficient than s/\n// because it neither scans nor copies the string. If VARIABLE is omitted, chops $_ . Example:

while (<>) { chop; # avoid \n on last field @array = split(/:/); ... }

You can actually chop anything that's an lvalue, including an assignment:

chop($cwd = `pwd`); chop($answer = <STDIN>);

If you chop a list, each element is chopped. Only the value of the last chop is returned.

Note that chop returns the last character. To return all but the last character, use substr( $string , 0, -1) .

chown LIST
Changes the owner (and group) of a list of files. The first two elements of the list must be the NUMERICAL uid and gid, in that order. Returns the number of files successfully changed.

$cnt = chown $uid, $gid, 'foo', 'bar'; chown $uid, $gid, @filenames;

Here's an example that looks up non-numeric uids in the passwd file:

print "User: "; chop($user = <STDIN>); print "Files: " chop($pattern = <STDIN>); ($login,$pass,$uid,$gid) = getpwnam($user) or die "$user not in passwd file"; @ary = <${pattern}>; # expand filenames chown $uid, $gid, @ary;

chr NUMBER
Returns the character represented by that NUMBER in the character set. For example, chr(65) is "A" in ASCII.

chroot FILENAME
Does the same as the system call of that name. If you don't know what it does, don't worry about it. If FILENAME is omitted, does chroot to $_ .

close FILEHANDLE
Closes the file or pipe associated with the file handle, returning TRUE only if stdio successfully flushes buffers and closes the system file descriptor. You don't have to close FILEHANDLE if you are immediately going to do another open on it, since open will close it for you. (See open() .) However, an explicit close on an input file resets the line counter ($.), while the implicit close done by open() does not. Also, closing a pipe will wait for the process executing on the pipe to complete, in case you want to look at the output of the pipe afterwards. Closing a pipe explicitly also puts the status value of the command into $? . Example:

open(OUTPUT, '|sort >foo'); # pipe to sort ... # print stuff to output close OUTPUT; # wait for sort to finish open(INPUT, 'foo'); # get sort's results

FILEHANDLE may be an expression whose value gives the real filehandle name.

closedir DIRHANDLE
Closes a directory opened by opendir() .

connect SOCKET,NAME
Attempts to connect to a remote socket, just as the connect system call does. Returns TRUE if it succeeded, FALSE otherwise. NAME should be a packed address of the appropriate type for the socket. See example in the perlipc manpage .

cos EXPR
Returns the cosine of EXPR (expressed in radians). If EXPR is omitted takes cosine of $_ .

crypt PLAINTEXT,SALT
Encrypts a string exactly like the crypt(3) function in the C library. Useful for checking the password file for lousy passwords, amongst other things. Only the guys wearing white hats should do this.

Here's an example that makes sure that whoever runs this program knows their own password:

$pwd = (getpwuid($<))[1]; $salt = substr($pwd, 0, 2); system "stty -echo"; print "Password: "; chop($word = <STDIN>); print "\n"; system "stty echo"; if (crypt($word, $salt) ne $pwd) { die "Sorry...\n"; } else { print "ok\n"; }

Of course, typing in your own password to whoever asks you for it is unwise.

dbmclose ASSOC_ARRAY
[This function has been superseded by the untie() function.]

Breaks the binding between a DBM file and an associative array.

dbmopen ASSOC,DBNAME,MODE
[This function has been superseded by the tie() function.]

This binds a dbm(3) or ndbm(3) file to an associative array. ASSOC is the name of the associative array. (Unlike normal open, the first argument is NOT a filehandle, even though it looks like one). DBNAME is the name of the database (without the .dir or .pag extension). If the database does not exist, it is created with protection specified by MODE (as modified by the umask() ). If your system only supports the older DBM functions, you may perform only one dbmopen() in your program. If your system has neither DBM nor ndbm, calling dbmopen() produces a fatal error.

If you don't have write access to the DBM file, you can only read associative array variables, not set them. If you want to test whether you can write, either use file tests or try setting a dummy array entry inside an eval() , which will trap the error.

Note that functions such as keys() and values() may return huge array values when used on large DBM files. You may prefer to use the each() function to iterate over large DBM files. Example:

# print out history file offsets dbmopen(%HIST,'/usr/lib/news/history',0666); while (($key,$val) = each %HIST) { print $key, ' = ', unpack('L',$val), "\n"; } dbmclose(%HIST);

defined EXPR
Returns a boolean value saying whether the lvalue EXPR has a real value or not. Many operations return the undefined value under exceptional conditions, such as end of file, uninitialized variable, system error and such. This function allows you to distinguish between an undefined null scalar and a defined null scalar with operations that might return a real null string, such as referencing elements of an array. You may also check to see if arrays or subroutines exist. Use of defined on predefined variables is not guaranteed to produce intuitive results.

When used on a hash array element, it tells you whether the value is defined, not whether the key exists in the hash. Use exists() for that.

Examples:

print if defined $switch{'D'}; print "$val\n" while defined($val = pop(@ary)); die "Can't readlink $sym: $!" unless defined($value = readlink $sym); eval '@foo = ()' if defined(@foo); die "No XYZ package defined" unless defined %_XYZ; sub foo { defined &$bar ? &$bar(@_) : die "No bar"; }

See also undef() .

delete EXPR
Deletes the specified value from its hash array. Returns the deleted value, or the undefined value if nothing was deleted. Deleting from $ENV {} modifies the environment. Deleting from an array tied to a DBM file deletes the entry from the DBM file. (But deleting from a tie() d hash doesn't necessarily return anything.)

The following deletes all the values of an associative array:

foreach $key (keys %ARRAY) { delete $ARRAY{$key}; }

(But it would be faster to use the undef() command.) Note that the EXPR can be arbitrarily complicated as long as the final operation is a hash key lookup:

delete $ref->[$x][$y]{$key};

die LIST
Outside of an eval() , prints the value of LIST to STDERR and exits with the current value of $! (errno). If $! is 0, exits with the value of ($? >> 8) (backtick `command` status). If ($? >> 8) is 0, exits with 255. Inside an eval() , the error message is stuffed into $@ , and the eval() is terminated with the undefined value.

Equivalent examples:

die "Can't cd to spool: $!\n" unless chdir '/usr/spool/news'; chdir '/usr/spool/news' or die "Can't cd to spool: $!\n"

If the value of EXPR does not end in a newline, the current script line number and input line number (if any) are also printed, and a newline is supplied. Hint: sometimes appending ", stopped" to your message will cause it to make better sense when the string "at foo line 123" is appended. Suppose you are running script "canasta".

die "/etc/games is no good"; die "/etc/games is no good, stopped";

produce, respectively

/etc/games is no good at canasta line 123. /etc/games is no good, stopped at canasta line 123.

See also exit() and warn() .

do BLOCK
Not really a function. Returns the value of the last command in the sequence of commands indicated by BLOCK. When modified by a loop modifier, executes the BLOCK once before testing the loop condition. (On other statements the loop modifiers test the conditional first.)

do SUBROUTINE(LIST)
A deprecated form of subroutine call. See the perlsub manpage .

do EXPR
Uses the value of EXPR as a filename and executes the contents of the file as a Perl script. Its primary use is to include subroutines from a Perl subroutine library.

do 'stat.pl';

is just like

eval `cat stat.pl`;

except that it's more efficient, more concise, keeps track of the current filename for error messages, and searches all the -I libraries if the file isn't in the current directory (see also the @INC array in Predefined Names ). It's the same, however, in that it does reparse the file every time you call it, so you probably don't want to do this inside a loop.

Note that inclusion of library modules is better done with the use() and require() operators.

dump LABEL
This causes an immediate core dump. Primarily this is so that you can use the undump program to turn your core dump into an executable binary after having initialized all your variables at the beginning of the program. When the new binary is executed it will begin by executing a goto LABEL (with all the restrictions that goto suffers). Think of it as a goto with an intervening core dump and reincarnation. If LABEL is omitted, restarts the program from the top. WARNING: any files opened at the time of the dump will NOT be open any more when the program is reincarnated, with possible resulting confusion on the part of Perl. See also -u option in the perlrun manpage .

Example:

#!/usr/bin/perl require 'getopt.pl'; require 'stat.pl'; %days = ( 'Sun' => 1, 'Mon' => 2, 'Tue' => 3, 'Wed' => 4, 'Thu' => 5, 'Fri' => 6, 'Sat' => 7, ); dump QUICKSTART if $ARGV[0] eq '-d'; QUICKSTART: Getopt('f');

each ASSOC_ARRAY
Returns a 2 element array consisting of the key and value for the next value of an associative array, so that you can iterate over it. Entries are returned in an apparently random order. When the array is entirely read, a null array is returned (which when assigned produces a FALSE (0) value). The next call to each() after that will start iterating again. The iterator can be reset only by reading all the elements from the array. You should not add elements to an array while you're iterating over it. There is a single iterator for each associative array, shared by all each() , keys() and values() function calls in the program. The following prints out your environment like the printenv(1) program, only in a different order:

while (($key,$value) = each %ENV) { print "$key=$value\n"; }

See also keys() and values() .

eof FILEHANDLE

eof
Returns 1 if the next read on FILEHANDLE will return end of file, or if FILEHANDLE is not open. FILEHANDLE may be an expression whose value gives the real filehandle name. (Note that this function actually reads a character and then ungetc() s it, so it is not very useful in an interactive context.) Do not read from a terminal file (or call eof(FILEHANDLE) on it) after end-of-file is reached. Filetypes such as terminals may lose the end-of-file condition if you do.

An eof without an argument uses the last file read as argument. Empty parentheses () may be used to indicate the pseudo file formed of the files listed on the command line, i.e. eof() is reasonable to use inside a while <>) loop to detect the end of only the last file. Use eof(ARGV) or eof without the parentheses to test EACH file in a while <>) loop. Examples:

# reset line numbering on each input file while (<>) { print "$.\t$_"; close(ARGV) if (eof); # Not eof(). } # insert dashes just before last line of last file while (<>) { if (eof()) { print "--------------\n"; close(ARGV); # close or break; is needed if we # are reading from the terminal } print; }

Practical hint: you almost never need to use eof in Perl, because the input operators return undef when they run out of data.

eval EXPR

eval BLOCK
EXPR is parsed and executed as if it were a little Perl program. It is executed in the context of the current Perl program, so that any variable settings, subroutine or format definitions remain afterwards. The value returned is the value of the last expression evaluated, or a return statement may be used, just as with subroutines.

If there is a syntax error or runtime error, or a die() statement is executed, an undefined value is returned by eval() , and $@ is set to the error message. If there was no error, $@ is guaranteed to be a null string. If EXPR is omitted, evaluates $_ . The final semicolon, if any, may be omitted from the expression.

Note that, since eval() traps otherwise-fatal errors, it is useful for determining whether a particular feature (such as dbmopen() or symlink() ) is implemented. It is also Perl's exception trapping mechanism, where the die operator is used to raise exceptions.

If the code to be executed doesn't vary, you may use the eval-BLOCK form to trap run-time errors without incurring the penalty of recompiling each time. The error, if any, is still returned in $@ . Examples:

# make divide-by-zero non-fatal eval { $answer = $a / $b; }; warn $@ if $@; # same thing, but less efficient eval '$answer = $a / $b'; warn $@ if $@; # a compile-time error eval { $answer = }; # a run-time error eval '$answer ='; # sets $@

With an eval() , you should be especially careful to remember what's being looked at when:

eval $x; # CASE 1 eval "$x"; # CASE 2 eval '$x'; # CASE 3 eval { $x }; # CASE 4 eval "\$$x++" # CASE 5 $$x++; # CASE 6

Cases 1 and 2 above behave identically: they run the code contained in the variable $x . (Although case 2 has misleading double quotes making the reader wonder what else might be happening (nothing is).) Cases 3 and 4 likewise behave in the same way: they run the code< $x >, which does nothing at all. (Case 4 is preferred for purely visual reasons.) Case 5 is a place where normally you WOULD like to use double quotes, except in that particular situation, you can just use symbolic references instead, as in case 6.

exec LIST
The exec() function executes a system command AND NEVER RETURNS . Use the system() function if you want it to return.

If there is more than one argument in LIST, or if LIST is an array with more than one value, calls execvp(3) with the arguments in LIST. If there is only one scalar argument, the argument is checked for shell metacharacters. If there are any, the entire argument is passed to /bin/sh -c for parsing. If there are none, the argument is split into words and passed directly to execvp() , which is more efficient. Note: exec() (and system(0) do not flush your output buffer, so you may need to set $| to avoid lost output. Examples:

exec '/bin/echo', 'Your arguments are: ', @ARGV; exec "sort $outfile | uniq";

If you don't really want to execute the first argument, but want to lie to the program you are executing about its own name, you can specify the program you actually want to run as an "indirect object" (without a comma) in front of the LIST. (This always forces interpretation of the LIST as a multi-valued list, even if there is only a single scalar in the list.) Example:

$shell = '/bin/csh'; exec $shell '-sh'; # pretend it's a login shell

or, more directly,

exec {'/bin/csh'} '-sh'; # pretend it's a login shell

exists EXPR
Returns TRUE if the specified hash key exists in its hash array, even if the corresponding value is undefined.

print "Exists\n" if exists $array{$key}; print "Defined\n" if defined $array{$key}; print "True\n" if $array{$key};

A hash element can only be TRUE if it's defined, and defined if it exists, but the reverse doesn't necessarily hold true.

Note that the EXPR can be arbitrarily complicated as long as the final operation is a hash key lookup:

if (exists $ref->[$x][$y]{$key}) { ... }

exit EXPR
Evaluates EXPR and exits immediately with that value. (Actually, it calls any defined END routines first, but the END routines may not abort the exit. Likewise any object destructors that need to be called are called before exit.) Example:

$ans = <STDIN>; exit 0 if $ans =~ /^[Xx]/;

See also die() . If EXPR is omitted, exits with 0 status.

exp EXPR
Returns e (the natural logarithm base) to the power of EXPR. If EXPR is omitted, gives exp( $_ ) .

fcntl FILEHANDLE,FUNCTION,SCALAR
Implements the fcntl(2) function. You'll probably have to say

use Fcntl;

first to get the correct function definitions. Argument processing and value return works just like ioctl() below. Note that fcntl() will produce a fatal error if used on a machine that doesn't implement fcntl(2). For example:

use Fcntl; fcntl($filehandle, F_GETLK, $packed_return_buffer);

fileno FILEHANDLE
Returns the file descriptor for a filehandle. This is useful for constructing bitmaps for select() . If FILEHANDLE is an expression, the value is taken as the name of the filehandle.

flock FILEHANDLE,OPERATION
Calls flock(2) on FILEHANDLE. See the flock (2) manpage for definition of OPERATION. Returns TRUE for success, FALSE on failure. Will produce a fatal error if used on a machine that doesn't implement flock(2). Here's a mailbox appender for BSD systems.

$LOCK_SH = 1; $LOCK_EX = 2; $LOCK_NB = 4; $LOCK_UN = 8; sub lock { flock(MBOX,$LOCK_EX); # and, in case someone appended # while we were waiting... seek(MBOX, 0, 2); } sub unlock { flock(MBOX,$LOCK_UN); }
    open(MBOX, >>/usr/spool/mail/ $ENV {'USER'}")
            or die "Can't open mailbox: $!";
    lock();
    print MBOX $msg,"\n\n";
    unlock();

Note that flock() can't lock things over the network. You need to do locking with fcntl() for that.

fork
Does a fork(2) system call. Returns the child pid to the parent process and 0 to the child process, or undef if the fork is unsuccessful. Note: unflushed buffers remain unflushed in both processes, which means you may need to set $| ( $AUTOFLUSH in English) or call the autoflush() FileHandle method to avoid duplicate output.

If you fork() without ever waiting on your children, you will accumulate zombies:

$SIG{'CHLD'} = sub { wait };

There's also the double-fork trick (error checking on fork() returns omitted);

unless ($pid = fork) { unless (fork) { exec "what you really wanna do"; die "no exec"; # ... or ... some_perl_code_here; exit 0; } exit 0; } waitpid($pid,0);

formline PICTURE, LIST
This is an internal function used by formats, though you may call it too. It formats (see the perlform manpage ) a list of values according to the contents of PICTURE, placing the output into the format output accumulator, $^ A . Eventually, when a write() is done, the contents of $^ A are written to some filehandle, but you could also read $^ A yourself and then set $^ A back to "". Note that a format typically does one formline() per line of form, but the formline() function itself doesn't care how many newlines are embedded in the PICTURE. This means that the ~ and ~~ tokens will treat the entire PICTURE as a single line. You may therefore need to use multiple formlines to implement a single record format, just like the format compiler.

Be careful if you put double quotes around the picture, since an " @ " character may be taken to mean the beginning of an array name. formline() always returns TRUE.

getc FILEHANDLE

getc
Returns the next character from the input file attached to FILEHANDLE, or a null string at end of file. If FILEHANDLE is omitted, reads from STDIN.

getlogin
Returns the current login from /etc/utmp , if any. If null, use getpwuid() .

$login = getlogin || (getpwuid($<))[0] || "Kilroy";

getpeername SOCKET
Returns the packed sockaddr address of other end of the SOCKET connection.

# An internet sockaddr $sockaddr = 'S n a4 x8'; $hersockaddr = getpeername(S); ($family, $port, $heraddr) = unpack($sockaddr,$hersockaddr);

getpgrp PID
Returns the current process group for the specified PID, 0 for the current process. Will produce a fatal error if used on a machine that doesn't implement getpgrp(2). If PID is omitted, returns process group of current process.

getppid
Returns the process id of the parent process.

getpriority WHICH,WHO
Returns the current priority for a process, a process group, or a user. (See the getpriority (2) manpage.) Will produce a fatal error if used on a machine that doesn't implement getpriority(2).

getpwnam NAME

getgrnam NAME

gethostbyname NAME

getnetbyname NAME

getprotobyname NAME

getpwuid UID

getgrgid GID

getservbyname NAME,PROTO

gethostbyaddr ADDR,ADDRTYPE

getnetbyaddr ADDR,ADDRTYPE

getprotobynumber NUMBER

getservbyport PORT,PROTO

getpwent

getgrent

gethostent

getnetent

getprotoent

getservent

setpwent

setgrent

sethostent STAYOPEN

setnetent STAYOPEN

setprotoent STAYOPEN

setservent STAYOPEN

endpwent

endgrent

endhostent

endnetent

endprotoent

endservent
These routines perform the same functions as their counterparts in the system library. Within a list context, the return values from the various get routines are as follows:

($name,$passwd,$uid,$gid, $quota,$comment,$gcos,$dir,$shell) = getpw* ($name,$passwd,$gid,$members) = getgr* ($name,$aliases,$addrtype,$length,@addrs) = gethost* ($name,$aliases,$addrtype,$net) = getnet* ($name,$aliases,$proto) = getproto* ($name,$aliases,$port,$proto) = getserv*

(If the entry doesn't exist you get a null list.)

Within a scalar context, you get the name, unless the function was a lookup by name, in which case you get the other thing, whatever it is. (If the entry doesn't exist you get the undefined value.) For example:

$uid = getpwnam $name = getpwuid $name = getpwent $gid = getgrnam $name = getgrgid $name = getgrent etc.

The $members value returned by getgr*() is a space separated list of the login names of the members of the group.

For the gethost*() functions, if the h_errno variable is supported in C, it will be returned to you via $? if the function call fails. The @addrs value returned by a successful call is a list of the raw addresses returned by the corresponding system library call. In the Internet domain, each address is four bytes long and you can unpack it by saying something like:

($a,$b,$c,$d) = unpack('C4',$addr[0]);

getsockname SOCKET
Returns the packed sockaddr address of this end of the SOCKET connection.

# An internet sockaddr $sockaddr = 'S n a4 x8'; $mysockaddr = getsockname(S); ($family, $port, $myaddr) = unpack($sockaddr,$mysockaddr);

getsockopt SOCKET,LEVEL,OPTNAME
Returns the socket option requested, or undefined if there is an error.

glob EXPR
Returns the value of EXPR with filename expansions such as a shell would do. This is the internal function implementing the<*.*> operator.

gmtime EXPR
Converts a time as returned by the time function to a 9-element array with the time localized for the Greenwich timezone. Typically used as follows:

($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = gmtime(time);

All array elements are numeric, and come straight out of a struct tm. In particular this means that $mon has the range 0..11 and $wday has the range 0..6. If EXPR is omitted, does gmtime( time() ) .

goto LABEL

goto EXPR

goto &NAME
The goto-LABEL form finds the statement labeled with LABEL and resumes execution there. It may not be used to go into any construct that requires initialization, such as a subroutine or a foreach loop. It also can't be used to go into a construct that is optimized away. It can be used to go almost anywhere else within the dynamic scope, including out of subroutines, but it's usually better to use some other construct such as last or die. The author of Perl has never felt the need to use this form of goto (in Perl, that is--C is another matter).

The goto-EXPR form expects a label name, whose scope will be resolved dynamically. This allows for computed gotos per FORTRAN, but isn't necessarily recommended if you're optimizing for maintainability:

goto ("FOO", "BAR", "GLARCH")[$i];

The goto-&NAME form is highly magical, and substitutes a call to the named subroutine for the currently running subroutine. This is used by AUTOLOAD subroutines that wish to load another subroutine and then pretend that the other subroutine had been called in the first place (except that any modifications to @_ in the current subroutine are propagated to the other subroutine.) After the goto, not even caller() will be able to tell that this routine was called first.

grep BLOCK LIST

grep EXPR,LIST
Evaluates the BLOCK or EXPR for each element of LIST (locally setting $_ to each element) and returns the list value consisting of those elements for which the expression evaluated to TRUE. In a scalar context, returns the number of times the expression was TRUE.

@foo = grep(!/^#/, @bar); # weed out comments

or equivalently,

@foo = grep {!/^#/} @bar; # weed out comments

Note that, since $_ is a reference into the list value, it can be used to modify the elements of the array. While this is useful and supported, it can cause bizarre results if the LIST is not a named array.

hex EXPR
Returns the decimal value of EXPR interpreted as an hex string. (To interpret strings that might start with 0 or 0x see oct() .) If EXPR is omitted, uses $_ .

import
There is no built-in import() function. It is merely an ordinary method subroutine defined (or inherited) by modules that wish to export names to another module. The use() function calls the import() method for the package used. See also use and the perlmod manpage .

index STR,SUBSTR,POSITION

index STR,SUBSTR
Returns the position of the first occurrence of SUBSTR in STR at or after POSITION. If POSITION is omitted, starts searching from the beginning of the string. The return value is based at 0, or whatever you've set the $[ variable to. If the substring is not found, returns one less than the base, ordinarily -1.

int EXPR
Returns the integer portion of EXPR. If EXPR is omitted, uses $_ .

ioctl FILEHANDLE,FUNCTION,SCALAR
Implements the ioctl(2) function. You'll probably have to say

require "ioctl.ph"; # probably /usr/local/lib/perl/ioctl.ph

first to get the correct function definitions. If ioctl.ph doesn't exist or doesn't have the correct definitions you'll have to roll your own, based on your C header files such as<sys/ioctl.h>. (There is a Perl script called h2ph that comes with the Perl kit which may help you in this.) SCALAR will be read and/or written depending on the FUNCTION--a pointer to the string value of SCALAR will be passed as the third argument of the actual ioctl call. (If SCALAR has no string value but does have a numeric value, that value will be passed rather than a pointer to the string value. To guarantee this to be TRUE, add a 0 to the scalar before using it.) The pack() and unpack() functions are useful for manipulating the values of structures used by ioctl() . The following example sets the erase character to DEL.

require 'ioctl.ph'; $sgttyb_t = "ccccs"; # 4 chars and a short if (ioctl(STDIN,$TIOCGETP,$sgttyb)) { @ary = unpack($sgttyb_t,$sgttyb); $ary[2] = 127; $sgttyb = pack($sgttyb_t,@ary); ioctl(STDIN,$TIOCSETP,$sgttyb) || die "Can't ioctl: $!"; }

The return value of ioctl (and fcntl) is as follows:

if OS returns: then Perl returns: -1 undefined value 0 string "0 but true" anything else that number

Thus Perl returns TRUE on success and FALSE on failure, yet you can still easily determine the actual value returned by the operating system:

($retval = ioctl(...)) || ($retval = -1); printf "System returned %d\n", $retval;

join EXPR,LIST
Joins the separate strings of LIST or ARRAY into a single string with fields separated by the value of EXPR, and returns the string. Example:

$_ = join(':', $login,$passwd,$uid,$gid,$gcos,$home,$shell);

See split .

keys ASSOC_ARRAY
Returns a normal array consisting of all the keys of the named associative array. (In a scalar context, returns the number of keys.) The keys are returned in an apparently random order, but it is the same order as either the values() or each() function produces (given that the associative array has not been modified). Here is yet another way to print your environment:

@keys = keys %ENV; @values = values %ENV; while ($#keys >= 0) { print pop(@keys), '=', pop(@values), "\n"; }

or how about sorted by key:

foreach $key (sort(keys %ENV)) { print $key, '=', $ENV{$key}, "\n"; }

kill LIST
Sends a signal to a list of processes. The first element of the list must be the signal to send. Returns the number of processes successfully signaled.

$cnt = kill 1, $child1, $child2; kill 9, @goners;

Unlike in the shell, in Perl if the SIGNAL is negative, it kills process groups instead of processes. (On System V, a negative PROCESS number will also kill process groups, but that's not portable.) That means you usually want to use positive not negative signals. You may also use a signal name in quotes.

last LABEL

last
The last command is like the break statement in C (as used in loops); it immediately exits the loop in question. If the LABEL is omitted, the command refers to the innermost enclosing loop. The continue block, if any, is not executed:

line: while (<STDIN>) { last line if /^$/; # exit when done with header ... }

lc EXPR
Returns an lowercased version of EXPR. This is the internal function implementing the \L escape in double-quoted strings.

lcfirst EXPR
Returns the value of EXPR with the first character lowercased. This is the internal function implementing the \l escape in double-quoted strings.

length EXPR
Returns the length in characters of the value of EXPR. If EXPR is omitted, returns length of $_ .

link OLDFILE,NEWFILE
Creates a new filename linked to the old filename. Returns 1 for success, 0 otherwise.

listen SOCKET,QUEUESIZE
Does the same thing that the listen system call does. Returns TRUE if it succeeded, FALSE otherwise. See example in the perlipc manpage .

local EXPR
In general, you should be using "my" instead of "local", because it's faster and safer. Format variables often use "local" though, as do other variables whose current value must be visible to called subroutines. This is known as dynamic scoping. Lexical scoping is done with "my", which works more like C's auto declarations.

A local modifies the listed variables to be local to the enclosing block, subroutine, eval or "do". If more than one value is listed, the list must be placed in parens. All the listed elements must be legal lvalues. This operator works by saving the current values of those variables in LIST on a hidden stack and restoring them upon exiting the block, subroutine or eval. This means that called subroutines can also reference the local variable, but not the global one. The LIST may be assigned to if desired, which allows you to initialize your local variables. (If no initializer is given for a particular variable, it is created with an undefined value.) Commonly this is used to name the parameters to a subroutine. Examples:

sub RANGEVAL { local($min, $max, $thunk) = @_; local $result = ''; local $i; # Presumably $thunk makes reference to $i for ($i = $min; $i < $max; $i++) { $result .= eval $thunk; } $result; } if ($sw eq '-v') { # init local array with global array local @ARGV = @ARGV; unshift(@ARGV,'echo'); system @ARGV; } # @ARGV restored # temporarily add to digits associative array if ($base12) { # (NOTE: not claiming this is efficient!) local(%digits) = (%digits,'t',10,'e',11); parse_num(); }

Note that local() is a run-time command, and so gets executed every time through a loop. In Perl 4 it used more stack storage each time until the loop was exited. Perl 5 reclaims the space each time through, but it's still more efficient to declare your variables outside the loop.

A local is simply a modifier on an lvalue expression. When you assign to a localized EXPR, the local doesn't change whether EXPR is viewed as a scalar or an array. So

local($foo) = <STDIN>; local @FOO = <STDIN>;

both supply a list context to the righthand side, while

local $foo = <STDIN>;

supplies a scalar context.

localtime EXPR
Converts a time as returned by the time function to a 9-element array with the time analyzed for the local timezone. Typically used as follows:

($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);

All array elements are numeric, and come straight out of a struct tm. In particular this means that $mon has the range 0..11 and $wday has the range 0..6. If EXPR is omitted, does localtime(time).

In a scalar context, prints out the ctime(3) value:

$now_string = localtime; # e.g. "Thu Oct 13 04:54:34 1994"

See also timelocal and the strftime(3) function available via the POSIX modulie.

log EXPR
Returns logarithm (base e ) of EXPR. If EXPR is omitted, returns log of $_ .

lstat FILEHANDLE

lstat EXPR
Does the same thing as the stat() function, but stats a symbolic link instead of the file the symbolic link points to. If symbolic links are unimplemented on your system, a normal stat() is done.

m//
The match operator. See the perlop manpage .

map BLOCK LIST

map EXPR,LIST
Evaluates the BLOCK or EXPR for each element of LIST (locally setting $_ to each element) and returns the list value composed of the results of each such evaluation. Evaluates BLOCK or EXPR in a list context, so each element of LIST may produce zero, one, or more elements in the returned value.

@chars = map(chr, @nums);

translates a list of numbers to the corresponding characters. And

%hash = map {&key($_), $_} @array;

is just a funny way to write

%hash = (); foreach $_ (@array) { $hash{&key($_)} = $_; }

mkdir FILENAME,MODE
Creates the directory specified by FILENAME, with permissions specified by MODE (as modified by umask). If it succeeds it returns 1, otherwise it returns 0 and sets $! (errno).

msgctl ID,CMD,ARG
Calls the System V IPC function msgctl. If CMD is &IPC_STAT, then ARG must be a variable which will hold the returned msqid_ds structure. Returns like ioctl: the undefined value for error, "0 but true" for zero, or the actual return value otherwise.

msgget KEY,FLAGS
Calls the System V IPC function msgget. Returns the message queue id, or the undefined value if there is an error.

msgsnd ID,MSG,FLAGS
Calls the System V IPC function msgsnd to send the message MSG to the message queue ID. MSG must begin with the long integer message type, which may be created with pack("L", $type ) . Returns TRUE if successful, or FALSE if there is an error.

msgrcv ID,VAR,SIZE,TYPE,FLAGS
Calls the System V IPC function msgrcv to receive a message from message queue ID into variable VAR with a maximum message size of SIZE. Note that if a message is received, the message type will be the first thing in VAR, and the maximum length of VAR is SIZE plus the size of the message type. Returns TRUE if successful, or FALSE if there is an error.

my EXPR
A "my" declares the listed variables to be local (lexically) to the enclosing block, subroutine, eval or "do". If more than one value is listed, the list must be placed in parens. All the listed elements must be legal lvalues. Only alphanumeric identifiers may be lexically scoped--magical builtins like $/ must be localized with "local" instead. In particular, you're not allowed to say

my $_; # Illegal.

Unlike the "local" declaration, variables declared with "my" are totally hidden from the outside world, including any called subroutines (even if it's the same subroutine--every call gets its own copy).

(An eval() , however, can see the lexical variables of the scope it is being evaluated in so long as the names aren't hidden by declarations within the eval() itself. See the perlref manpage .)

The EXPR may be assigned to if desired, which allows you to initialize your variables. (If no initializer is given for a particular variable, it is created with an undefined value.) Commonly this is used to name the parameters to a subroutine. Examples:

sub RANGEVAL { my($min, $max, $thunk) = @_; my $result = ''; my $i; # Presumably $thunk makes reference to $i for ($i = $min; $i < $max; $i++) { $result .= eval $thunk; } $result; } if ($sw eq '-v') { # init my array with global array my @ARGV = @ARGV; unshift(@ARGV,'echo'); system @ARGV; } # Outer @ARGV again visible

The "my" is simply a modifier on something you might assign to. So when you do assign to the EXPR, the "my" doesn't change whether EXPR is viewed as a scalar or an array. So

my ($foo) = <STDIN>; my @FOO = <STDIN>;

both supply a list context to the righthand side, while

my $foo = <STDIN>;

supplies a scalar context. But the following only declares one variable:

my $foo, $bar = 1;

That has the same effect as

my $foo; $bar = 1;

The declared variable is not introduced (is not visible) until after the current statement. Thus,

my $x = $x;

can be used to initialize the new $x with the value of the old $x , and the expression

my $x = 123 and $x == 123

is false unless the old $x happened to have the value 123.

Some users may wish to encourage the use of lexically scoped variables. As an aid to catching implicit references to package variables, if you say

use strict 'vars';

then any variable reference from there to the end of the enclosing block must either refer to a lexical variable, or must be fully qualified with the package name. A compilation error results otherwise. An inner block may countermand this with S<"no strict 'vars'">.

next LABEL

next
The next command is like the continue statement in C; it starts the next iteration of the loop:

line: while (<STDIN>) { next line if /^#/; # discard comments ... }

Note that if there were a continue block on the above, it would get executed even on discarded lines. If the LABEL is omitted, the command refers to the innermost enclosing loop.

no Module LIST
See the "use" function, which "no" is the opposite of.

oct EXPR
Returns the decimal value of EXPR interpreted as an octal string. (If EXPR happens to start off with 0x, interprets it as a hex string instead.) The following will handle decimal, octal, and hex in the standard Perl or C notation:

$val = oct($val) if $val =~ /^0/;

If EXPR is omitted, uses $_ .

open FILEHANDLE,EXPR

open FILEHANDLE
Opens the file whose filename is given by EXPR, and associates it with FILEHANDLE. If FILEHANDLE is an expression, its value is used as the name of the real filehandle wanted. If EXPR is omitted, the scalar variable of the same name as the FILEHANDLE contains the filename. If the filename begins with <" or nothing, the file is opened for input. If the filename begins with ">", the file is opened for output. If the filename begins with >>", the file is opened for appending. (You can put a '+' in front of the '>' or <' to indicate that you want both read and write access to the file.) If the filename begins with "|", the filename is interpreted as a command to which output is to be piped, and if the filename ends with a "|", the filename is interpreted as command which pipes input to us. (You may not have a command that pipes both in and out.) Opening '-' opens STDIN and opening '>-' opens STDOUT. Open returns non-zero upon success, the undefined value otherwise. If the open involved a pipe, the return value happens to be the pid of the subprocess. Examples:

$ARTICLE = 100; open ARTICLE or die "Can't find article $ARTICLE: $!\n"; while (<ARTICLE>) {...
    open(LOG, >>/usr/spool/news/twitlog'); # (log is reserved)
    open(article, "caesar <$article |");    # decrypt article
    open(extract, "|sort >/tmp/Tmp$$");     # $$ is our process id
    # process argument list of files along with any includes
    foreach $file (@ARGV) {
        process($file, 'fh00');
    }
    sub process {
        local($filename, $input) = @_;
        $input++;               # this is a string increment
        unless (open($input, $filename)) {
            print STDERR "Can't open $filename: $!\n";
            return;
        }
        while (<$input>) {              # note use of indirection
            if (/^#include "(.*)"/) {
                process($1, $input);
                next;
            }
            ...         # whatever
        }
    }

You may also, in the Bourne shell tradition, specify an EXPR beginning with ">&", in which case the rest of the string is interpreted as the name of a filehandle (or file descriptor, if numeric) which is to be duped and opened. You may use & after >,>>,<, +>, >> and <. The mode you specify should match the mode of the original filehandle. Here is a script that saves, redirects, and restores STDOUT and STDERR:

#!/usr/bin/perl open(SAVEOUT, ">&STDOUT"); open(SAVEERR, ">&STDERR"); open(STDOUT, ">foo.out") || die "Can't redirect stdout"; open(STDERR, ">&STDOUT") || die "Can't dup stdout"; select(STDERR); $| = 1; # make unbuffered select(STDOUT); $| = 1; # make unbuffered print STDOUT "stdout 1\n"; # this works for print STDERR "stderr 1\n"; # subprocesses too close(STDOUT); close(STDERR); open(STDOUT, ">&SAVEOUT"); open(STDERR, ">&SAVEERR"); print STDOUT "stdout 2\n"; print STDERR "stderr 2\n";

If you specify <&=N", where N is a number, then Perl will do an equivalent of C's fdopen() of that file descriptor. For example:

open(FILEHANDLE, "<&=$fd")

If you open a pipe on the command "-", i.e. either "|-" or "-|", then there is an implicit fork done, and the return value of open is the pid of the child within the parent process, and 0 within the child process. (Use defined( $pid ) to determine whether the open was successful.) The filehandle behaves normally for the parent, but i/o to that filehandle is piped from/to the STDOUT/STDIN of the child process. In the child process the filehandle isn't opened--i/o happens from/to the new STDOUT or STDIN. Typically this is used like the normal piped open when you want to exercise more control over just how the pipe command gets executed, such as when you are running setuid, and don't want to have to scan shell commands for metacharacters. The following pairs are more or less equivalent:

open(FOO, "|tr '[a-z]' '[A-Z]'"); open(FOO, "|-") || exec 'tr', '[a-z]', '[A-Z]'; open(FOO, "cat -n '$file'|"); open(FOO, "-|") || exec 'cat', '-n', $file;

Explicitly closing any piped filehandle causes the parent process to wait for the child to finish, and returns the status value in $?. Note: on any operation which may do a fork, unflushed buffers remain unflushed in both processes, which means you may need to set $| to avoid duplicate output.

The filename that is passed to open will have leading and trailing whitespace deleted. In order to open a file with arbitrary weird characters in it, it's necessary to protect any leading and trailing whitespace thusly:

$file =~ s#^(\s)#./$1#; open(FOO, "< $file\0");

opendir DIRHANDLE,EXPR
Opens a directory named EXPR for processing by readdir() , telldir() , seekdir() , rewinddir() and closedir() . Returns TRUE if successful. DIRHANDLEs have their own namespace separate from FILEHANDLEs.

ord EXPR
Returns the numeric ascii value of the first character of EXPR. If EXPR is omitted, uses $_ .

pack TEMPLATE,LIST
Takes an array or list of values and packs it into a binary structure, returning the string containing the structure. The TEMPLATE is a sequence of characters that give the order and type of values, as follows:

Each letter may optionally be followed by a number which gives a repeat count. With all types except "a", "A", "b", "B", "h" and "H", and "P" the pack function will gobble up that many values from the LIST. A * for the repeat count means to use however many items are left. The "a" and "A" types gobble just one value, but pack it as a string of length count, padding with nulls or spaces as necessary. (When unpacking, "A" strips trailing spaces and nulls, but "a" does not.) Likewise, the "b" and "B" fields pack a string that many bits long. The "h" and "H" fields pack a string that many nybbles long. The "P" packs a pointer to a structure of the size indicated by the length. Real numbers (floats and doubles) are in the native machine format only; due to the multiplicity of floating formats around, and the lack of a standard "network" representation, no facility for interchange has been made. This means that packed floating point data written on one machine may not be readable on another - even if both use IEEE floating point arithmetic (as the endian-ness of the memory representation is not part of the IEEE spec). Note that Perl uses doubles internally for all numeric calculation, and converting from double into float and thence back to double again will lose precision (i.e. unpack("f", pack("f", $foo ) ) will not in general equal $foo ).

Examples:

$foo = pack("cccc",65,66,67,68); # foo eq "ABCD" $foo = pack("c4",65,66,67,68); # same thing $foo = pack("ccxxcc",65,66,67,68); # foo eq "AB\0\0CD" $foo = pack("s2",1,2); # "\1\0\2\0" on little-endian # "\0\1\0\2" on big-endian $foo = pack("a4","abcd","x","y","z"); # "abcd" $foo = pack("aaaa","abcd","x","y","z"); # "axyz" $foo = pack("a14","abcdefg"); # "abcdefg\0\0\0\0\0\0\0" $foo = pack("i9pl", gmtime); # a real struct tm (on my system anyway) sub bintodec { unpack("N", pack("B32", substr("0" x 32 . shift, -32))); }

The same template may generally also be used in the unpack function.

pipe READHANDLE,WRITEHANDLE
Opens a pair of connected pipes like the corresponding system call. Note that if you set up a loop of piped processes, deadlock can occur unless you are very careful. In addition, note that Perl's pipes use stdio buffering, so you may need to set $| to flush your WRITEHANDLE after each command, depending on the application.

pop ARRAY
Pops and returns the last value of the array, shortening the array by 1. Has a similar effect to

$tmp = $ARRAY[$#ARRAY--];

If there are no elements in the array, returns the undefined value.

pos SCALAR
Returns the offset of where the last m//g search left off for the variable in question. May be modified to change that offset.

print FILEHANDLE LIST

print LIST

print
Prints a string or a comma-separated list of strings. Returns non-zero if successful. FILEHANDLE may be a scalar variable name, in which case the variable contains the name of the filehandle, thus introducing one level of indirection. (NOTE: If FILEHANDLE is a variable and the next token is a term, it may be misinterpreted as an operator unless you interpose a + or put parens around the arguments.) If FILEHANDLE is omitted, prints by default to standard output (or to the last selected output channel--see select() ). If LIST is also omitted, prints $_ to STDOUT. To set the default output channel to something other than STDOUT use the select operation. Note that, because print takes a LIST, anything in the LIST is evaluated in a list context, and any subroutine that you call will have one or more of its expressions evaluated in a list context. Also be careful not to follow the print keyword with a left parenthesis unless you want the corresponding right parenthesis to terminate the arguments to the print--interpose a + or put parens around all the arguments.

printf FILEHANDLE LIST

printf LIST
Equivalent to a "print FILEHANDLE sprintf(LIST)". The first argument of the list will be interpreted as the printf format.

push ARRAY,LIST
Treats ARRAY as a stack, and pushes the values of LIST onto the end of ARRAY. The length of ARRAY increases by the length of LIST. Has the same effect as

for $value (LIST) { $ARRAY[++$#ARRAY] = $value; }

but is more efficient. Returns the new number of elements in the array.

q/STRING/

qq/STRING/

qx/STRING/

qw/STRING/
Generalized quotes. See the perlop manpage .

quotemeta EXPR
Returns the value of EXPR with with all regular expression metacharacters backslashed. This is the internal function implementing the \Q escape in double-quoted strings.

rand EXPR

rand
Returns a random fractional number between 0 and the value of EXPR. (EXPR should be positive.) If EXPR is omitted, returns a value between 0 and 1. This function produces repeatable sequences unless srand() is invoked. See also srand() .

(Note: if your rand function consistently returns numbers that are too large or too small, then your version of Perl was probably compiled with the wrong number of RANDBITS. As a workaround, you can usually multiply EXPR by the correct power of 2 to get the range you want. This will make your script unportable, however. It's better to recompile if you can.)

read FILEHANDLE,SCALAR,LENGTH,OFFSET

read FILEHANDLE,SCALAR,LENGTH
Attempts to read LENGTH bytes of data into variable SCALAR from the specified FILEHANDLE. Returns the number of bytes actually read, or undef if there was an error. SCALAR will be grown or shrunk to the length actually read. An OFFSET may be specified to place the read data at some other place than the beginning of the string. This call is actually implemented in terms of stdio's fread call. To get a true read system call, see sysread() .

readdir DIRHANDLE
Returns the next directory entry for a directory opened by opendir() . If used in a list context, returns all the rest of the entries in the directory. If there are no more entries, returns an undefined value in a scalar context or a null list in a list context.

readlink EXPR
Returns the value of a symbolic link, if symbolic links are implemented. If not, gives a fatal error. If there is some system error, returns the undefined value and sets $! (errno). If EXPR is omitted, uses $_ .

recv SOCKET,SCALAR,LEN,FLAGS
Receives a message on a socket. Attempts to receive LENGTH bytes of data into variable SCALAR from the specified SOCKET filehandle. Actually does a C recvfrom() , so that it can returns the address of the sender. Returns the undefined value if there's an error. SCALAR will be grown or shrunk to the length actually read. Takes the same flags as the system call of the same name.

redo LABEL

redo
The redo command restarts the loop block without evaluating the conditional again. The continue block, if any, is not executed. If the LABEL is omitted, the command refers to the innermost enclosing loop. This command is normally used by programs that want to lie to themselves about what was just input:

# a simpleminded Pascal comment stripper # (warning: assumes no { or } in strings) line: while (<STDIN>) { while (s|({.*}.*){.*}|$1 |) {} s|{.*}| |; if (s|{.*| |) { $front = $_; while (<STDIN>) { if (/}/) { # end of comment? s|^|$front{|; redo line; } } } print; }

ref EXPR
Returns a TRUE value if EXPR is a reference, FALSE otherwise. The value returned depends on the type of thing the reference is a reference to. Builtin types include:

REF SCALAR ARRAY HASH CODE GLOB

If the referenced object has been blessed into a package, then that package name is returned instead. You can think of ref() as a typeof() operator.

if (ref($r) eq "HASH") { print "r is a reference to an associative array.\n"; } if (!ref ($r) { print "r is not a reference at all.\n"; }

See also the perlref manpage .

rename OLDNAME,NEWNAME
Changes the name of a file. Returns 1 for success, 0 otherwise. Will not work across filesystem boundaries.

require EXPR

require
Demands some semantics specified by EXPR, or by $_ if EXPR is not supplied. If EXPR is numeric, demands that the current version of Perl ($] or $PERL_VERSION ) be equal or greater than EXPR.

Otherwise, demands that a library file be included if it hasn't already been included. The file is included via the do-FILE mechanism, which is essentially just a variety of eval() . Has semantics similar to the following subroutine:

sub require { local($filename) = @_; return 1 if $INC{$filename}; local($realfilename,$result); ITER: { foreach $prefix (@INC) { $realfilename = "$prefix/$filename"; if (-f $realfilename) { $result = do $realfilename; last ITER; } } die "Can't find $filename in \@INC"; } die $@ if $@; die "$filename did not return true value" unless $result; $INC{$filename} = $realfilename; $result; }

Note that the file will not be included twice under the same specified name. The file must return TRUE as the last statement to indicate successful execution of any initialization code, so it's customary to end such a file with "1;" unless you're sure it'll return TRUE otherwise. But it's better just to put the " 1; ", in case you add more statements.

If EXPR is a bare word, the require assumes a " .pm " extension for you, to make it easy to load standard modules. This form of loading of modules does not risk altering your namespace.

For a yet-more-powerful import facility, see the use and the perlmod manpage .

reset EXPR

reset
Generally used in a continue block at the end of a loop to clear variables and reset ?? searches so that they work again. The expression is interpreted as a list of single characters (hyphens allowed for ranges). All variables and arrays beginning with one of those letters are reset to their pristine state. If the expression is omitted, one-match searches (?pattern?) are reset to match again. Only resets variables or searches in the current package. Always returns 1. Examples:

reset 'X'; # reset all X variables reset 'a-z'; # reset lower case variables reset; # just reset ?? searches

Resetting "A-Z" is not recommended since you'll wipe out your ARGV and ENV arrays. Only resets package variables--lexical variables are unaffected, but they clean themselves up on scope exit anyway, so anymore you probably want to use them instead. See my .

return LIST
Returns from a subroutine or eval with the value specified. (Note that in the absence of a return a subroutine or eval will automatically return the value of the last expression evaluated.)

reverse LIST
In a list context, returns a list value consisting of the elements of LIST in the opposite order. In a scalar context, returns a string value consisting of the bytes of the first element of LIST in the opposite order.

rewinddir DIRHANDLE
Sets the current position to the beginning of the directory for the readdir() routine on DIRHANDLE.

rindex STR,SUBSTR,POSITION

rindex STR,SUBSTR
Works just like index except that it returns the position of the LAST occurrence of SUBSTR in STR. If POSITION is specified, returns the last occurrence at or before that position.

rmdir FILENAME
Deletes the directory specified by FILENAME if it is empty. If it succeeds it returns 1, otherwise it returns 0 and sets $! (errno). If FILENAME is omitted, uses $_ .

s///
The substitution operator. See the perlop manpage .

scalar EXPR
Forces EXPR to be interpreted in a scalar context and returns the value of EXPR.

seek FILEHANDLE,POSITION,WHENCE
Randomly positions the file pointer for FILEHANDLE, just like the fseek() call of stdio. FILEHANDLE may be an expression whose value gives the name of the filehandle. The values for WHENCE are 0 to set the file pointer to POSITION, 1 to set the it to current plus POSITION, and 2 to set it to EOF plus offset. You may use the values SEEK_SET, SEEK_CUR, and SEEK_END for this is using the POSIX module. Returns 1 upon success, 0 otherwise.

seekdir DIRHANDLE,POS
Sets the current position for the readdir() routine on DIRHANDLE. POS must be a value returned by telldir() . Has the same caveats about possible directory compaction as the corresponding system library routine.

select FILEHANDLE

select
Returns the currently selected filehandle. Sets the current default filehandle for output, if FILEHANDLE is supplied. This has two effects: first, a write or a print without a filehandle will default to this FILEHANDLE. Second, references to variables related to output will refer to this output channel. For example, if you have to set the top of form format for more than one output channel, you might do the following:

select(REPORT1); $^ = 'report1_top'; select(REPORT2); $^ = 'report2_top';

FILEHANDLE may be an expression whose value gives the name of the actual filehandle. Thus:

$oldfh = select(STDERR); $| = 1; select($oldfh);

With Perl 5, filehandles are objects with methods, and the last example is preferably written

use FileHandle; STDERR->autoflush(1);

select RBITS,WBITS,EBITS,TIMEOUT
This calls the select system(2) call with the bitmasks specified, which can be constructed using fileno() and vec() , along these lines:

$rin = $win = $ein = ''; vec($rin,fileno(STDIN),1) = 1; vec($win,fileno(STDOUT),1) = 1; $ein = $rin | $win;

If you want to select on many filehandles you might wish to write a subroutine:

sub fhbits { local(@fhlist) = split(' ',$_[0]); local($bits); for (@fhlist) { vec($bits,fileno($_),1) = 1; } $bits; } $rin = &fhbits('STDIN TTY SOCK');

The usual idiom is:

($nfound,$timeleft) = select($rout=$rin, $wout=$win, $eout=$ein, $timeout);

or to block until something becomes ready:

$nfound = select($rout=$rin, $wout=$win, $eout=$ein, undef);

Any of the bitmasks can also be undef. The timeout, if specified, is in seconds, which may be fractional. Note: not all implementations are capable of returning the $timeleft . If not, they always return $timeleft equal to the supplied $timeout .

You can effect a 250 microsecond sleep this way:

select(undef, undef, undef, 0.25);

semctl ID,SEMNUM,CMD,ARG
Calls the System V IPC function semctl. If CMD is &IPC_STAT or &GETALL, then ARG must be a variable which will hold the returned semid_ds structure or semaphore value array. Returns like ioctl: the undefined value for error, "0 but true" for zero, or the actual return value otherwise.

semget KEY,NSEMS,FLAGS
Calls the System V IPC function semget. Returns the semaphore id, or the undefined value if there is an error.

semop KEY,OPSTRING
Calls the System V IPC function semop to perform semaphore operations such as signaling and waiting. OPSTRING must be a packed array of semop structures. Each semop structure can be generated with pack("sss", $semnum , $semop , $semflag ) . The number of semaphore operations is implied by the length of OPSTRING. Returns TRUE if successful, or FALSE if there is an error. As an example, the following code waits on semaphore $semnum of semaphore id $semid:

$semop = pack("sss", $semnum, -1, 0); die "Semaphore trouble: $!\n" unless semop($semid, $semop);

To signal the semaphore, replace "-1" with "1".

send SOCKET,MSG,FLAGS,TO

send SOCKET,MSG,FLAGS
Sends a message on a socket. Takes the same flags as the system call of the same name. On unconnected sockets you must specify a destination to send TO, in which case it does a C sendto() . Returns the number of characters sent, or the undefined value if there is an error.

setpgrp PID,PGRP
Sets the current process group for the specified PID, 0 for the current process. Will produce a fatal error if used on a machine that doesn't implement setpgrp(2).

setpriority WHICH,WHO,PRIORITY
Sets the current priority for a process, a process group, or a user. (See setpriority(2).) Will produce a fatal error if used on a machine that doesn't implement setpriority(2).

setsockopt SOCKET,LEVEL,OPTNAME,OPTVAL
Sets the socket option requested. Returns undefined if there is an error. OPTVAL may be specified as undef if you don't want to pass an argument.

shift ARRAY

shift
Shifts the first value of the array off and returns it, shortening the array by 1 and moving everything down. If there are no elements in the array, returns the undefined value. If ARRAY is omitted, shifts the @ARGV array in the main program, and the @_ array in subroutines. (This is determined lexically.) See also unshift() , push() , and pop() . Shift() and unshift() do the same thing to the left end of an array that push() and pop() do to the right end.

shmctl ID,CMD,ARG
Calls the System V IPC function shmctl. If CMD is &IPC_STAT, then ARG must be a variable which will hold the returned shmid_ds structure. Returns like ioctl: the undefined value for error, "0 but true" for zero, or the actual return value otherwise.

shmget KEY,SIZE,FLAGS
Calls the System V IPC function shmget. Returns the shared memory segment id, or the undefined value if there is an error.

shmread ID,VAR,POS,SIZE

shmwrite ID,STRING,POS,SIZE
Reads or writes the System V shared memory segment ID starting at position POS for size SIZE by attaching to it, copying in/out, and detaching from it. When reading, VAR must be a variable which will hold the data read. When writing, if STRING is too long, only SIZE bytes are used; if STRING is too short, nulls are written to fill out SIZE bytes. Return TRUE if successful, or FALSE if there is an error.

shutdown SOCKET,HOW
Shuts down a socket connection in the manner indicated by HOW, which has the same interpretation as in the system call of the same name.

sin EXPR
Returns the sine of EXPR (expressed in radians). If EXPR is omitted, returns sine of $_ .

sleep EXPR

sleep
Causes the script to sleep for EXPR seconds, or forever if no EXPR. May be interrupted by sending the process a SIGALRM. Returns the number of seconds actually slept. You probably cannot mix alarm() and sleep() calls, since sleep() is often implemented using alarm() .

On some older systems, it may sleep up to a full second less than what you requested, depending on how it counts seconds. Most modern systems always sleep the full amount.

socket SOCKET,DOMAIN,TYPE,PROTOCOL
Opens a socket of the specified kind and attaches it to filehandle SOCKET. DOMAIN, TYPE and PROTOCOL are specified the same as for the system call of the same name. You should "use Socket;" first to get the proper definitions imported. See the example in the perlipc manpage .

socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL
Creates an unnamed pair of sockets in the specified domain, of the specified type. DOMAIN, TYPE and PROTOCOL are specified the same as for the system call of the same name. If unimplemented, yields a fatal error. Returns TRUE if successful.

sort SUBNAME LIST

sort BLOCK LIST

sort LIST
Sorts the LIST and returns the sorted list value. Nonexistent values of arrays are stripped out. If SUBNAME or BLOCK is omitted, sorts in standard string comparison order. If SUBNAME is specified, it gives the name of a subroutine that returns an integer less than, equal to, or greater than 0, depending on how the elements of the array are to be ordered. (The<=> and cmp operators are extremely useful in such routines.) SUBNAME may be a scalar variable name, in which case the value provides the name of the subroutine to use. In place of a SUBNAME, you can provide a BLOCK as an anonymous, in-line sort subroutine.

In the interests of efficiency the normal calling code for subroutines is bypassed, with the following effects: the subroutine may not be a recursive subroutine, and the two elements to be compared are passed into the subroutine not via @_ but as $a and $b (see example below). They are passed by reference, so don't modify $a and $b .

Examples:

# sort lexically @articles = sort @files; # same thing, but with explicit sort routine @articles = sort {$a cmp $b} @files; # same thing in reversed order @articles = sort {$b cmp $a} @files; # sort numerically ascending @articles = sort {$a <=> $b} @files; # sort numerically descending @articles = sort {$b <=> $a} @files; # sort using explicit subroutine name sub byage { $age{$a} <=> $age{$b}; # presuming integers } @sortedclass = sort byage @class; sub backwards { $b cmp $a; } @harry = ('dog','cat','x','Cain','Abel'); @george = ('gone','chased','yz','Punished','Axed'); print sort @harry; # prints AbelCaincatdogx print sort backwards @harry; # prints xdogcatCainAbel print sort @george, 'to', @harry; # prints AbelAxedCainPunishedcatchaseddoggonetoxyz

splice ARRAY,OFFSET,LENGTH,LIST

splice ARRAY,OFFSET,LENGTH

splice ARRAY,OFFSET
Removes the elements designated by OFFSET and LENGTH from an array, and replaces them with the elements of LIST, if any. Returns the elements removed from the array. The array grows or shrinks as necessary. If LENGTH is omitted, removes everything from OFFSET onward. The following equivalencies hold (assuming $[ == 0):

push(@a,$x,$y) splice(@a,$#a+1,0,$x,$y) pop(@a) splice(@a,-1) shift(@a) splice(@a,0,1) unshift(@a,$x,$y) splice(@a,0,0,$x,$y) $a[$x] = $y splice(@a,$x,1,$y);

Example, assuming array lengths are passed before arrays:

sub aeq { # compare two list values local(@a) = splice(@_,0,shift); local(@b) = splice(@_,0,shift); return 0 unless @a == @b; # same len? while (@a) { return 0 if pop(@a) ne pop(@b); } return 1; } if (&aeq($len,@foo[1..$len],0+@bar,@bar)) { ... }

split /PATTERN/,EXPR,LIMIT

split /PATTERN/,EXPR

split /PATTERN/

split
Splits a string into an array of strings, and returns it.

If not in a list context, returns the number of fields found and splits into the @_ array. (In a list context, you can force the split into @_ by using ?? as the pattern delimiters, but it still returns the array value.) The use of implicit split to @_ is deprecated, however.

If EXPR is omitted, splits the $_ string. If PATTERN is also omitted, splits on whitespace (after skipping any leading whitespace). Anything matching PATTERN is taken to be a delimiter separating the fields. (Note that the delimiter may be longer than one character.) If LIMIT is specified and is not negative, splits into no more than that many fields (though it may split into fewer). If LIMIT is unspecified, trailing null fields are stripped (which potential users of pop() would do well to remember). If LIMIT is negative, it is treated as if an arbitrarily large LIMIT had been specified.

A pattern matching the null string (not to be confused with a null pattern // , which is just one member of the set of patterns matching a null string) will split the value of EXPR into separate characters at each point it matches that way. For example:

print join(':', split(/ */, 'hi there'));

produces the output 'h:i:t:h:e:r:e'.

The LIMIT parameter can be used to partially split a line

($login, $passwd, $remainder) = split(/:/, $_, 3);

When assigning to a list, if LIMIT is omitted, Perl supplies a LIMIT one larger than the number of variables in the list, to avoid unnecessary work. For the list above LIMIT would have been 4 by default. In time critical applications it behooves you not to split into more fields than you really need.

If the PATTERN contains parentheses, additional array elements are created from each matching substring in the delimiter.

split(/([,-])/, "1-10,20");

produces the list value

(1, '-', 10, ',', 20)

The pattern /PATTERN/ may be replaced with an expression to specify patterns that vary at runtime. (To do runtime compilation only once, use / $variable /o .)

As a special case, specifying a PATTERN of space ( ' ' ) will split on white space just as split with no arguments does. Thus, split(' ') can be used to emulate awk 's default behavior, whereas split(/ /) will give you as many null initial fields as there are leading spaces. A split on /\s+/ is like a split(' ') except that any leading whitespace produces a null first field. A split with no arguments really does a split(' ', $_ ) internally.

Example:

open(passwd, '/etc/passwd'); while (<passwd>) { ($login, $passwd, $uid, $gid, $gcos, $home, $shell) = split(/:/); ... }

(Note that $shell above will still have a newline on it. See chop , chomp , and join .)

sprintf FORMAT,LIST
Returns a string formatted by the usual printf conventions of the C language. (The * character for an indirectly specified length is not supported, but you can get the same effect by interpolating a variable into the pattern.)

sqrt EXPR
Return the square root of EXPR. If EXPR is omitted, returns square root of $_ .

srand EXPR
Sets the random number seed for the rand operator. If EXPR is omitted, does srand(time) . Of course, you'd need something much more random than that for cryptographic purposes, since it's easy to guess the current time. Checksumming the compressed output of rapidly changing operating system status programs is the usual method. Examples are posted regularly to comp.security.unix.

stat FILEHANDLE

stat EXPR
Returns a 13-element array giving the status info for a file, either the file opened via FILEHANDLE, or named by EXPR. Returns a null list if the stat fails. Typically used as follows:

($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, $atime,$mtime,$ctime,$blksize,$blocks) = stat($filename);

If stat is passed the special filehandle consisting of an underline, no stat is done, but the current contents of the stat structure from the last stat or filetest are returned. Example:

if (-x $file && (($d) = stat(_)) && $d < 0) { print "$file is executable NFS file\n"; }

(This only works on machines for which the device number is negative under NFS.)

study SCALAR

study
Takes extra time to study SCALAR ( $_ if unspecified) in anticipation of doing many pattern matches on the string before it is next modified. This may or may not save time, depending on the nature and number of patterns you are searching on, and on the distribution of character frequencies in the string to be searched--you probably want to compare runtimes with and without it to see which runs faster. Those loops which scan for many short constant strings (including the constant parts of more complex patterns) will benefit most. You may have only one study active at a time--if you study a different scalar the first is "unstudied". (The way study works is this: a linked list of every character in the string to be searched is made, so we know, for example, where all the 'k' characters are. From each search string, the rarest character is selected, based on some static frequency tables constructed from some C programs and English text. Only those places that contain this "rarest" character are examined.)

For example, here is a loop which inserts index producing entries before any line containing a certain pattern:

while (<>) { study; print ".IX foo\n" if /\bfoo\b/; print ".IX bar\n" if /\bbar\b/; print ".IX blurfl\n" if /\bblurfl\b/; ... print; }

In searching for /\bfoo\b/, only those locations in $_ that contain "f" will be looked at, because "f" is rarer than "o". In general, this is a big win except in pathological cases. The only question is whether it saves you more time than it took to build the linked list in the first place.

Note that if you have to look for strings that you don't know till runtime, you can build an entire loop as a string and eval that to avoid recompiling all your patterns all the time. Together with undefining $/ to input entire files as one record, this can be very fast, often faster than specialized programs like fgrep(1). The following scans a list of files ( @files ) for a list of words ( @words ), and prints out the names of those files that contain a match:

$search = 'while (<>) { study;'; foreach $word (@words) { $search .= "++\$seen{\$ARGV} if /\\b$word\\b/;\n"; } $search .= "}"; @ARGV = @files; undef $/; eval $search; # this screams $/ = "\n"; # put back to normal input delim foreach $file (sort keys(%seen)) { print $file, "\n"; }

substr EXPR,OFFSET,LEN

substr EXPR,OFFSET
Extracts a substring out of EXPR and returns it. First character is at offset 0, or whatever you've set $[ to. If OFFSET is negative, starts that far from the end of the string. If LEN is omitted, returns everything to the end of the string. If LEN is negative, leaves that many characters off the end of the string.

You can use the substr() function as an lvalue, in which case EXPR must be an lvalue. If you assign something shorter than LEN, the string will shrink, and if you assign something longer than LEN, the string will grow to accommodate it. To keep the string the same length you may need to pad or chop your value using sprintf() .

symlink OLDFILE,NEWFILE
Creates a new filename symbolically linked to the old filename. Returns 1 for success, 0 otherwise. On systems that don't support symbolic links, produces a fatal error at run time. To check for that, use eval:

$symlink_exists = (eval 'symlink("","");', $@ eq '');

syscall LIST
Calls the system call specified as the first element of the list, passing the remaining elements as arguments to the system call. If unimplemented, produces a fatal error. The arguments are interpreted as follows: if a given argument is numeric, the argument is passed as an int. If not, the pointer to the string value is passed. You are responsible to make sure a string is pre-extended long enough to receive any result that might be written into a string. If your integer arguments are not literals and have never been interpreted in a numeric context, you may need to add 0 to them to force them to look like numbers.

require 'syscall.ph'; # may need to run h2ph syscall(&SYS_write, fileno(STDOUT), "hi there\n", 9);

Note that Perl only supports passing of up to 14 arguments to your system call, which in practice should usually suffice.

sysread FILEHANDLE,SCALAR,LENGTH,OFFSET

sysread FILEHANDLE,SCALAR,LENGTH
Attempts to read LENGTH bytes of data into variable SCALAR from the specified FILEHANDLE, using the system call read(2). It bypasses stdio, so mixing this with other kinds of reads may cause confusion. Returns the number of bytes actually read, or undef if there was an error. SCALAR will be grown or shrunk to the length actually read. An OFFSET may be specified to place the read data at some other place than the beginning of the string.

system LIST
Does exactly the same thing as "exec LIST" except that a fork is done first, and the parent process waits for the child process to complete. Note that argument processing varies depending on the number of arguments. The return value is the exit status of the program as returned by the wait() call. To get the actual exit value divide by 256. See also exec .

syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET

syswrite FILEHANDLE,SCALAR,LENGTH
Attempts to write LENGTH bytes of data from variable SCALAR to the specified FILEHANDLE, using the system call write(2). It bypasses stdio, so mixing this with prints may cause confusion. Returns the number of bytes actually written, or undef if there was an error. An OFFSET may be specified to place the read data at some other place than the beginning of the string.

tell FILEHANDLE

tell
Returns the current file position for FILEHANDLE. FILEHANDLE may be an expression whose value gives the name of the actual filehandle. If FILEHANDLE is omitted, assumes the file last read.

telldir DIRHANDLE
Returns the current position of the readdir() routines on DIRHANDLE. Value may be given to seekdir() to access a particular location in a directory. Has the same caveats about possible directory compaction as the corresponding system library routine.

tie VARIABLE,PACKAGENAME,LIST
This function binds a variable to a package that will provide the implementation for the variable. VARIABLE is the name of the variable to be enchanted. PACKAGENAME is the name of a package implementing objects of correct type. Any additional arguments are passed to the "new" method of the package (meaning TIESCALAR, TIEARRAY, or TIEHASH). Typically these are arguments such as might be passed to the dbm_open() function of C.

Note that functions such as keys() and values() may return huge array values when used on large objects, like DBM files. You may prefer to use the each() function to iterate over such. Example:

# print out history file offsets tie(%HIST, NDBM_File, '/usr/lib/news/history', 1, 0); while (($key,$val) = each %HIST) { print $key, ' = ', unpack('L',$val), "\n"; } untie(%HIST);

A package implementing an associative array should have the following methods:

TIEHASH objectname, LIST DESTROY this FETCH this, key STORE this, key, value DELETE this, key EXISTS this, key FIRSTKEY this NEXTKEY this, lastkey

A package implementing an ordinary array should have the following methods:

TIEARRAY objectname, LIST DESTROY this FETCH this, key STORE this, key, value [others TBD]

A package implementing a scalar should have the following methods:

TIESCALAR objectname, LIST DESTROY this FETCH this, STORE this, value

time
Returns the number of non-leap seconds since 00:00:00 UTC, January 1, 1970. Suitable for feeding to gmtime() and localtime() .

times
Returns a four-element array giving the user and system times, in seconds, for this process and the children of this process.

($user,$system,$cuser,$csystem) = times;

tr///
The translation operator. See the perlop manpage .

truncate FILEHANDLE,LENGTH

truncate EXPR,LENGTH
Truncates the file opened on FILEHANDLE, or named by EXPR, to the specified length. Produces a fatal error if truncate isn't implemented on your system.

uc EXPR
Returns an uppercased version of EXPR. This is the internal function implementing the \U escape in double-quoted strings.

ucfirst EXPR
Returns the value of EXPR with the first character uppercased. This is the internal function implementing the \u escape in double-quoted strings.

umask EXPR

umask
Sets the umask for the process and returns the old one. If EXPR is omitted, merely returns current umask.

undef EXPR

undef
Undefines the value of EXPR, which must be an lvalue. Use only on a scalar value, an entire array, or a subroutine name (using "&"). (Using undef() will probably not do what you expect on most predefined variables or DBM list values, so don't do that.) Always returns the undefined value. You can omit the EXPR, in which case nothing is undefined, but you still get an undefined value that you could, for instance, return from a subroutine. Examples:

undef $foo; undef $bar{'blurfl'}; undef @ary; undef %assoc; undef &mysub; return (wantarray ? () : undef) if $they_blew_it;

unlink LIST
Deletes a list of files. Returns the number of files successfully deleted.

$cnt = unlink 'a', 'b', 'c'; unlink @goners; unlink <*.bak>;

Note: unlink will not delete directories unless you are superuser and the -U flag is supplied to Perl. Even if these conditions are met, be warned that unlinking a directory can inflict damage on your filesystem. Use rmdir instead.

unpack TEMPLATE,EXPR
Unpack does the reverse of pack: it takes a string representing a structure and expands it out into a list value, returning the array value. (In a scalar context, it merely returns the first value produced.) The TEMPLATE has the same format as in the pack function. Here's a subroutine that does substring:

sub substr { local($what,$where,$howmuch) = @_; unpack("x$where a$howmuch", $what); }

and then there's

sub ordinal { unpack("c",$_[0]); } # same as ord()

In addition, you may prefix a field with a <number> to indicate that you want a<number>-bit checksum of the items instead of the items themselves. Default is a 16-bit checksum. For example, the following computes the same number as the System V sum program:

while (<>) { $checksum += unpack("%16C*", $_); } $checksum %= 65536;

The following efficiently counts the number of set bits in a bit vector:

$setbits = unpack("%32b*", $selectmask);

untie VARIABLE
Breaks the binding between a variable and a package. (See tie() .)

unshift ARRAY,LIST
Does the opposite of a shift . Or the opposite of a push , depending on how you look at it. Prepends list to the front of the array, and returns the new number of elements in the array.

unshift(ARGV, '-e') unless $ARGV[0] =~ /^-/;

Note the LIST is prepended whole, not one element at a time, so the prepended elements stay in the same order. Use reverse to do the reverse.

use Module LIST

use Module
Imports some semantics into the current package from the named module, generally by aliasing certain subroutine or variable names into your package. It is exactly equivalent to

BEGIN { require Module; import Module LIST; }

If you don't want your namespace altered, use require instead.

The BEGIN forces the require and import to happen at compile time. The require makes sure the module is loaded into memory if it hasn't been yet. The import is not a builtin--it's just an ordinary static method call into the "Module" package to tell the module to import the list of features back into the current package. The module can implement its import method any way it likes, though most modules just choose to derive their import method via inheritance from the Exporter class that is defined in the Exporter module.

Because this is a wide-open interface, pragmas (compiler directives) are also implemented this way. Currently implemented pragmas are:

use integer; use sigtrap qw(SEGV BUS); use strict qw(subs vars refs); use subs qw(afunc blurfl);

These pseudomodules import semantics into the current block scope, unlike ordinary modules, which import symbols into the current package (which are effective through the end of the file).

There's a corresponding "no" command that unimports meanings imported by use.

no integer; no strict 'refs';

See the perlmod manpage for a list of standard modules and pragmas.

utime LIST
Changes the access and modification times on each file of a list of files. The first two elements of the list must be the NUMERICAL access and modification times, in that order. Returns the number of files successfully changed. The inode modification time of each file is set to the current time. Example of a "touch" command:

#!/usr/bin/perl $now = time; utime $now, $now, @ARGV;

values ASSOC_ARRAY
Returns a normal array consisting of all the values of the named associative array. (In a scalar context, returns the number of values.) The values are returned in an apparently random order, but it is the same order as either the keys() or each() function would produce on the same array. See also keys() and each() .

vec EXPR,OFFSET,BITS
Treats a string as a vector of unsigned integers, and returns the value of the bitfield specified. May also be assigned to. BITS must be a power of two from 1 to 32.

Vectors created with vec() can also be manipulated with the logical operators |, & and ^, which will assume a bit vector operation is desired when both operands are strings.

To transform a bit vector into a string or array of 0's and 1's, use these:

$bits = unpack("b*", $vector); @bits = split(//, unpack("b*", $vector));

If you know the exact length in bits, it can be used in place of the *.

wait
Waits for a child process to terminate and returns the pid of the deceased process, or -1 if there are no child processes. The status is returned in $?.

waitpid PID,FLAGS
Waits for a particular child process to terminate and returns the pid of the deceased process, or -1 if there is no such child process. The status is returned in $?. If you say

use POSIX "wait_h"; ... waitpid(-1,&WNOHANG);

then you can do a non-blocking wait for any process. Non-blocking wait is only available on machines supporting either the waitpid(2) or wait4(2) system calls. However, waiting for a particular pid with FLAGS of 0 is implemented everywhere. (Perl emulates the system call by remembering the status values of processes that have exited but have not been harvested by the Perl script yet.)

wantarray
Returns TRUE if the context of the currently executing subroutine is looking for a list value. Returns FALSE if the context is looking for a scalar.

return wantarray ? () : undef;

warn LIST
Produces a message on STDERR just like die() , but doesn't exit or throw an exception.

write FILEHANDLE

write EXPR

write
Writes a formatted record (possibly multi-line) to the specified file, using the format associated with that file. By default the format for a file is the one having the same name is the filehandle, but the format for the current output channel (see the select() function) may be set explicitly by assigning the name of the format to the $~ variable.

Top of form processing is handled automatically: if there is insufficient room on the current page for the formatted record, the page is advanced by writing a form feed, a special top-of-page format is used to format the new page header, and then the record is written. By default the top-of-page format is the name of the filehandle with "_TOP" appended, but it may be dynamically set to the format of your choice by assigning the name to the $^ variable while the filehandle is selected. The number of lines remaining on the current page is in variable $-, which can be set to 0 to force a new page.

If FILEHANDLE is unspecified, output goes to the current default output channel, which starts out as STDOUT but may be changed by the select operator. If the FILEHANDLE is an EXPR, then the expression is evaluated and the resulting string is used to look up the name of the FILEHANDLE at run time. For more on formats, see the perlform manpage .

Note that write is NOT the opposite of read. Unfortunately.

y///
The translation operator. See tr/// .

.