| Index |
Task |
Comment |
Due |
Mhrs |
| 1 |
Add tune smoothing |
lazmo |
Sep |
|
| 2 |
Put LER/HER X/Y Delta Tunes into Waveforms |
lazmo - change tuneControl.st |
Sep |
|
| 3 |
Add zero-beam tune setpoint |
lazmo - change delta tune calc to check for nobeam |
Sep |
|
| 4 |
Changes to VMS Tune Feedback to take Waveforms |
esm |
Sep |
|
| 5 |
Handle beam on/off conditions |
lazmo - See afisher's flow chart |
Aug |
|
| 6 |
Add 10deg to phase min/max,add phase-out-of-range status |
lazmo - Check for -180/180 limits |
Done |
|
| 7 |
Add better status/message for SLOPE_LO |
lazmo - Slope lower limit on scan processing |
Done |
|
| 8 |
Put GP00 on terminal server |
lahey/saa |
Done |
|
| 9 |
Automatic Sensitivity Control |
lazmo - See afisher's flow chart |
Aug |
|
| 10 |
Auto Drive Control |
lazmo - See afisher's flow chart |
Aug |
|
| 11 |
Config files |
saa |
Nov |
|
| 12 |
Periodic Slow Readback from LIA |
Excitation Power, Phase Offset, Time Constant, Sensitivity, Statuses |
2003 |
|
| 13 |
Replace GP00 VME with 3.14 Linux |
saa |
2003 |
|