NLCTA Injection Cable Crates
External connections to the modules in the injector crates are:
- S1 = Slot 1, S2=Slot2, etc
- -(sw)- thru one mux section
- Modules
- S0 niCpu030
- S1 Mux
- S2 Mux
- S3 Digitizer
- S4 Mux
- S5 Digitizer
- Jumpers:
- S1-Com00 S1-10
- S1-Com10 S1-20
- S1-Com20 S1-40
- S2-Com00 S2-10
- S2-Com10 S2-20
- S2-Com20 S2-40
- External Connections
- STB-01(pp) S4-31 n/c
- STB-02(trbr) S1-30 Pulser Ext. Trig. 1x48" + stb->pulser
- Pulser AB+(tee) S1-00 S4-00 2x48"
- Pulser AB-(tee) S2-00 S4-10 2x48"
- Pulser CD+(tee) S1-12 S4-01 2x48"
- Pulser CD-(tee) S2-12 S4-11 2x48"
- In-Crate connections
- S1-Com40 S3-Ch1 1x12"
- S1-Com30 S3-Ext.Trig. 1x12"
- S2-Com40 S3-Ch2 1x12"
- S4-Com00 S5-Ch1 1x12"
- S4-Com10 S5-Ch2 1x12"
- S4-Com30 S5-Ext.Trig. 1x12"
- Terminations
- STB-01(pp) -> S4-31 -(sw)-> S5-Ext. Trig(tee) -> 50 Ohms
- STB-02(trbr) -> Pulser Ex. Trig.(tee) -> S1-30
- -(sw)-> S3-Ext.Trig.(tee) ->50 Ohms
- Total Material
- 9x48" smb -> bnc
- 6x12" smb -> bnc
- 1x48" bnc -> bnc
- 7xtee
- 2x50 Ohm
- last modified 960206
- this page was created by Thomas Dean.