8-pack To Do List

11/24/03 (in attendance: Ron, Judy, Janice)

#	priority	Thing to do	Comments
1	med –ish?	processing loop -lost the fault reset button -need sliders at bottom for control variables -need to spec vacuum check	Still thinking about what to do with vacuum
1	hihi	summary of vac HV statuses	Judy did this! It’s great! Will have to wait to check.
1	hihi	archiver problems	Janice was told to click more slowly. NTF.
2	hi	epics display for plc vac analog display	Judy did this (yeah, Judy!); Janice will check when we’re back on tomorrow.
2	hi	AES support: -TR09 fails to find SIS modules? -need addresses for SIS modules &/or assess difficulty of supporting macnair modules instead	This is the highest priority right now. Ron is working to get the SISes going in TR09. progress continues...
2	hi	another dio channel for mod on/off (the one currently implemented resets)	Judy is ready (yeah!), hardware is not (boo). Wait for HW.
2	hi	save/restore	For drive:attens - Janice will look into proc loop inputs Judy will look into init value Ron will look into proc loop code. Also, need to look at lopr/hopr stuff and logging of plc digitals.
2	hi	scp timeout	Terri says it’s done. Janice hasn’t checked yet.
3	med-hi	epics display for plc vac analog mon display	Judy had done this before we made the list (yeah, Judy!)
3	med-hi	sys:lst:pwr (lost power) doesn’t have the fun pmax, pmin, pave accoutrement, need these for diag button to its right on the proc loop panel to work (once it gets sent the right pv)	This is done. It didn’t work for Janice once, but did work after the meeting. Yeah, Ron & Judy!
3	med-hi	sled ADC readouts are purple. Not sure why.	Judy & Ron fixed. Yeah!
4	med	Sort through Cassel’s new touch panel printouts, mod database and panels as needed	Janice counted 4 changes (and there’s one more out there).
4	med	finish PLC based displays	follows item above
4	med	Summary PVs (database) for displays	follows item above
4	med	alh – remind me again what it is	TBD: Janice will look with Judy and try to decide what needs to be done.
4	med	We have infinite loop CRR running to update anlg statuses in ta03.	Done! Yeah, Nancy and Ron!
4	med	the dac_attenuators in MW instead of volts	Ron will look up the equation and Elias is supposed to be thinking about it also.
5	med-lo	PLC checkout (need all the displays for this)	follows PLC items above
6	lo	Add all poly coef and smoo var to pack_adc_calib	Judy has spec
6	lo	lost power >db panel – janice fixed, needs to be released.	Done.
6	lo	FONT- detach their SISes from the NLCTA readout loop	Ron says this is coming soon.
7	lolo	adc values are green when negative (once commissioned, shouldn’t ever be negative)	wthc?
8	lololo	need to setup lopr and hopr for favorite things to watch on stripcharts	drop.
		PLC-EPICS purple status	M Harms swapped proms – yeah, Mike and Steph! Janice pointed out there are still odd messages on tr00:stndcm:modu. She will reboot the dcm when convenient tomorrow.
		ADCs rewired – need to redo database	Done. Yeah, Judy!
		Proc loop panel issues	Judy is working on scrunching this.

For LLRF guys

Hardware Deadman (from last time: Steve will test the hardware hook to RF chassis.)

Modify DIO module for mod on/off